An Efficient One-pot Synthesis of β-Amino/β-Acetamido Carbonyl Compounds via ZrCl4-catalyzed Mannich-type Reaction

Zirconium(IV) chloride catalyzed efficient one-pot synthesis of β-amino/β-acetamido carbonyl compounds at room temperature is described. In the presence of ZrCl4, the three-component Mannich-type reaction via a variety of in situ generated aldimines, with various ketones, aromatic aldehydes and aromatic amines in ethanol, led to the formation of β-amino carbonyl compounds and the four-component Mannich-type reaction of aromatic aldehydes with various ketones, acetonitrile and acetyl chloride resulted in the corresponding β-acetamido carbonyl compounds in high to excellent yields. This methodology has also been applied towards the synthesis of dimeric β-amino/β-acetamido carbonyl compounds.     

Green Biginelli‐type Reaction: Solvent‐free Synthesis of 5‐unsubstituted 3,4‐dihydropyrimdin‐2(1H)‐ones

The Biginelli‐type compounds, 5‐unsubstituted 3,4‐dihydropyrimdin‐2(1H)‐ones were synthesized by a one‐pot three‐component condensation of aromatic aldehydes, aromatic ketones and urea in the presence of SnCl₄ · 5H₂O under solvent‐free conditions. The advantages of this method are short reaction time (4–10 min), excellent yields (74–97%), inexpensive catalyst and solvent‐free conditions. A plausible mechanism was proposed.     

Chemoselectivity in the Reaction of 2‐Diazo‐3‐oxo‐3‐phenylpropanal with Aldehydes and Ketones

The chemoselectivity in the reaction of 2‐diazo‐3‐oxo‐3‐phenylpropanal ( 1 ) with aldehydes and ketones in the presence of Et₃N was investigated. The results indicate that 1 reacts with aromatic aldehydes with weak electron‐donating substituents and cyclic ketones under formation of 6‐phenyl‐4H‐1,3‐dioxin‐4‐one derivatives. However, it reacts with aromatic aldehydes with electron‐withdrawing substituents to yield 1,3‐diaryl‐3‐hydroxypropan‐1‐ones, accompanied by chalcone derivatives in some cases. It did not react with linear ketones, aliphatic aldehydes, and aromatic aldehydes with strong electron‐donating substituents. A mechanism for the formation of 1,3‐diaryl‐3‐hydroxypropan‐1‐ones and chalcone derivatives is proposed. We also tried to react 1 with other unsaturated compounds, including various olefins and nitriles, and cumulated unsaturated compounds, such as N,N′‐dialkylcarbodiimines, phenyl isocyanate, isothiocyanate, and CS₂. Only with N,N′‐dialkylcarbodiimines, the expected cycloaddition took place.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones by Deprotective Cyclization of N‐{3‐[(2E)‐3‐Arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides in Water

A new and convenient method for the preparation of 2‐aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones 4 has been developed. Thus, N‐{3‐[(2E)‐3‐arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides 3 are synthesized from commercially available pyridin‐2‐amine using an easily performed three‐step sequence and are subjected to cyclization with deprotection under acidic conditions in H₂O to give the desired products. Similarly, 2‐aryl‐2,3‐dihydro‐1,7‐naphthyridin‐4(1H)‐ones 8 and 2‐aryl‐2,3‐dihydro‐1,6‐naphthyridin‐4(1H)‐ones 12 can be prepared from pyridin‐3‐amine and pyridin‐4‐amine, respectively.     

Solid‐State and Solution Structural Studies of 4‐{[C(E)]‐1H‐Azol‐1‐ylimino)methyl}pyridin‐3‐ols

The new N‐salicylideneheteroarenamines 1 – 4 were prepared by reacting the biologically relevant 3‐hydroxy‐4‐pyridinecarboxaldehyde ( 5 ) with 1H‐imidazol‐1‐amine ( 6 ), 1H‐pyrazol‐1‐amine ( 7 ), 1H‐1,2,4‐triazol‐1‐amine ( 8 ), and 1H‐1,3,4‐triazol‐1‐amine ( 9 ). Solution ¹H‐, ¹³C‐, and ¹⁵N‐NMR were used to establish that the hydroxyimino form A is the predominant tautomer. A combination of ¹³C‐ and ¹⁵N‐CPMAS‐NMR with X‐ray crystallographic studies confirms that the same form is present in the solid state. The stabilities and H‐bond geometries of the different forms, tautomers and rotamers, are discussed by using B3LYP/6‐31G** calculations.     

Silica‐bonded S‐sulfonic Acid as a Recyclable Catalyst for Synthesis of 2,3‐Dihydroquinazolin‐4(1H)‐ones

2,3‐Dihydroquinazolin‐4(1H)‐one derivatives were synthesized via a one‐pot, three component reaction of isatoic anhydride and an aromatic aldehyde with ammonium acetate or primary amine catalyzed by silica‐bonded S‐sulfonic acid in ethanol at 80°C. The reaction work‐up is simple and the catalyst is easily separated from the products by filtration. The heterogeneous catalyst was recycled for ten runs upon the condensation reaction of isatoic anhydride and 4‐chlorobenzaldehyde with ammonium acetate without losing its catalytic activity.     

A ruthenium(II) complex with p‐cymene and (S)‐2‐(anilinomethyl)pyrrolidine

The title compound, [(S)‐2‐(anilino­methyl)­pyrrolidine‐N,N′]‐chloro(η⁶‐para‐cymene)­ruthenium(II) chloride, [RuCl‐(C₁₀H₁₄)(C₁₁H₁₆N₂)]Cl, has been synthesized by the reaction of [RuCl₂(p‐cymene)]₂ (p‐cymene is para‐iso­propyl­toluene) with (S)‐2‐(anilinomethyl)­pyrrolidine in triethyl­amine/2‐propanol. The Ru atom is in a pseudo‐tetrahedral environment coordinated by a chloride ligand, the aromatic hydro­carbon is linked in a η⁶ manner and the amine is linked via its two N atoms. The chloride anion is involved in hydrogen bonding with the di­amine moieties through N—H?Cl interactions, with N?Cl distances of 3.273 (4) and 3.352 (4) Å.     

Isocyanide‐Based Three‐Component Synthesis of Highly Substituted 1,6‐Dihydro‐6,6‐dimethylpyrazine‐2,3‐dicarbonitrile, 3,4‐Dihydrobenzo[g]quinoxalin‐2‐amine,and 3,4‐Dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine Derivatives

A novel and efficient isocyanide‐based multicomponent reaction between alkyl or aryl isocyanides 1 , 2,3‐diaminomaleonitrile ( 2 ), naphthalene‐2,3‐diamines ( 6 ) or benzene‐1,2‐diamine ( 9 ), and 3‐oxopentanedioic acid ( 3 ) or Meldrum's acid ( 4 ) or ketones 7 was developed for the ecologic synthesis, at room temperature under mild conditions, of 1,6‐dihydropyrazine‐2,3‐dicarbonitriles 5a – 5f in H₂O without using any catalyst, and of 3,4‐dihydrobenzo[g]quinoxalin‐2‐amine and 3,4‐dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine derivatives 8a – 8g and 10a – 10e , respectively, in the presence of a catalytic amount of p‐toluenesulfonic acid (TsOH) in EtOH, in good to excellent yields (Scheme 1).     

High resolution solid‐state 13C‐NMR study of as‐cured and irradiated epoxy resins

This article presents the effects of strong ionizing radiations on the physico‐chemical modifications of aliphatic or aromatic amine‐cured epoxy resins based on diglycidyl ether of bisphenol A (DGEBA). Such epoxy resins have a considerable number of applications in the nuclear industrial field and are known to be very stable under moderate irradiation conditions. Using extensively high resolution solid‐state ¹³C‐NMR spectroscopy we show that the aliphatic amine‐cured resin (DGEBA‐TETA) appears much more sensitive to gamma rays than the aromatic amine‐cured one (DGEBA‐DDM). On the one hand, qualitative analyses of the high resolution solid‐state ¹³C‐NMR spectra of both epoxy resins, irradiated under similar conditions (8.5 MGy), reveal almost no change in the aromatic amine‐cured resin whereas new resonances are observed for the aliphatic amine‐cured resin. These new peaks were interpreted as the formation of new functional groups such as amides, acids and/or esters and to alkene groups probably formed in the aliphatic amine skeleton. On the other hand, molecular dynamics of these polymers are investigated by measuring the relaxation times, T_CH, T_1ρH and T_1C , before and after irradiation. The study of relaxation data shows the formation, under irradiation, of a more rigid network, especially for the aliphatic amine‐cured system and confirms that aromatic amine‐cured resin [DGEBA‐4,4′‐diaminodiphenylmethane(DDM)] is much less affected by ionizing radiations than the aliphatic amine‐cured resin [DGEBA‐triethylenetetramine(TETA)]. Moreover, it has been shown that the molecular modifications generated by irradiation on the powder of the aliphatic‐amine‐cured resin appear to be homogeneously distributed inside the polymers as no phase separations can be deduced from the above analyses. Copyright © 2001 John Wiley & Sons, Ltd.     

Synthesis and Structure of 3,4‐Dihydropyrido[2′,3′:3,4]pyrazolo[1,5‐a][1,3,5]triazin‐2‐amines

A new convenient synthon for heterocyclic chemistry, namely 1H‐pyrazolo[3,4‐b]pyridin‐3‐ylguanidine was successfully prepared by selective guanylation of 1H‐pyrazolo[3,4‐b]pyridin‐3‐amine. A series of 3,4‐dihydropyrido[2′,3′:3,4]pyrazolo[1,5‐a][1,3,5]triazin‐2‐amines was synthesized from 1H‐pyrazolo[3,4‐b]pyridin‐3‐ylguanidine using aldehydes or ketones as one‐carbon inserting reagents. The tautomeric preferences of the products were determined using spectroscopic (e.g., 2D NOESY NMR) and single crystal X‐ray diffraction data.     

One‐Pot Synthesis of N,N‐Disubstituted (Z)‐4‐(Halomethylidene)‐4H‐3,1‐benzothiazin‐2‐amines from 2‐(2,2‐Dihaloethenyl)phenyl Isothiocyanates and Secondary Amines

We have developed a one‐pot procedure for the preparation of N,N‐disubstituted (Z)‐4‐(halomethylidene)‐4H‐3,1‐benzothiazin‐2‐amines 3 from 2‐(2,2‐dihaloethenyl)phenyl isothiocyanates 1 , easily accessible from known 2‐(2,2‐dihaloethenyl)benzenamines by a three‐step sequence, and secondary amines. Thus, the isothiocyanates 1 react with secondary amines to afford the corresponding thiourea derivatives, of which the treatment with NaH provides the desired products.     

Dimedone‐catalyzed Addition of Amines into Cyano Group: Facile Synthesis of Thiazol‐2‐yl Substituted E‐Acrylonitriles

An efficient dimedone‐catalyzed synthesis of highly functionalized thiazol‐2‐yl substituted E‐acrylonitrile derivatives has been established through two‐step reaction of α‐thiocyanate ketones with malononitrile and amines. The α‐thiocyanate ketones were subjected with malononitrile to provide thiazol‐2‐ylidenemalononitrile derivatives, followed with various amines in the present of dimedone to yield the final thiazol‐2‐yl substituted acrylonitrile derivatives.     

Synthesis of Novel Disubstituted Pyrazolo[1,5‐a]pyrimidines,Imidazo[1,2‐a]pyrimidines,and Pyrimido[1,2‐a]benzimidazoles Containing Thioether and Aryl Moieties

A series of novel 6‐[(1,3,4‐thiadiazol‐2‐yl)sulfanyl]‐7‐phenylpyrazolo[1,5‐a]pyrimidines, 5‐phenyl‐6‐[(1,3,4‐thiadiazol‐2‐yl)sulfanyl]imidazo[1,2‐a]pyrimidines, and 2‐phenyl‐3‐[(1,3,4‐thiadiazol‐2‐yl)sulfanyl]pyrimido[1,2‐a]benzimidazoles have been synthesized in four steps starting with 2‐hydroxyacetophenone. The intermediate 3‐[(1,3,4‐thiadiazol‐2‐yl)sulfanyl]‐4H‐1‐benzopyran‐4‐ones reacted with pyrazol‐3‐amines, 5‐methylpyrazol‐3‐amine, and 1H‐imidazol‐2‐amine, 1H‐benzimidazol‐2‐amine via a cyclocondensation to give the title compounds in the presence of MeONa as base, respectively. The approach affords the target compounds in acceptable‐to‐good yields. The new compounds were characterized by their IR, NMR, and HR mass spectra.     

Asymmetric Synthesis of 2,3‐Dihydropyrroles by Ring‐Opening/Cyclization of Cyclopropyl Ketones Using Primary Amines

The asymmetric ring‐opening/cyclization of cyclopropyl ketones with primary amine nucleophiles was catalyzed by a chiral N,N′‐dioxide/scandium(III) complex through a kinetic resolution process. A broad range of cyclopropyl ketones and primary amines are suitable substrates of this reaction. The corresponding products were afforded in excellent enantioselectivities and yields (up to 97 % ee and 98 % yield) under mild reaction conditions. This method provides a promising access to chiral 2,3‐dihydropyrroles as well as an effective procedure for the kinetic resolution of 2‐substituted cyclopropyl ketones.     

Synthesis of Bis‐Heterocyclic 1H‐Imidazole 3‐Oxides from 3‐Oxido‐1H‐imidazole‐4‐carbohydrazides

The reaction of 1H‐imidazole‐4‐carbohydrazides 1 , which are conveniently accessible by treatment of the corresponding esters with NH₂NH₂?H₂O, with isothiocyanates in refluxing EtOH led to thiosemicarbazides (=hydrazinecarbothioamides) 4 in high yields (Scheme 2). Whereas 4 in boiling aqueous NaOH yielded 2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐thiones 5 , the reaction in concentrated H₂SO₄ at room temperature gave 1,3,4‐thiadiazol‐2‐amines 6 . Similarly, the reaction of 1 with butyl isocyanate led to semicarbazides 7 , which, under basic conditions, undergo cyclization to give 2,4‐dihydro‐3H‐1,2,4‐triazol‐3‐ones 8 (Scheme 3). Treatment of 1 with Ac₂O yielded the diacylhydrazine derivatives 9 exclusively, and the alternative isomerization of 1 to imidazol‐2‐ones was not observed (Scheme 4). It is important to note that, in all these transformations, the imidazole N‐oxide residue is retained. Furthermore, it was shown that imidazole N‐oxides bearing a 1,2,4‐triazole‐3‐thione or 1,3,4‐thiadiazol‐2‐amine moiety undergo the S‐transfer reaction to give bis‐heterocyclic 1H‐imidazole‐2‐thiones 11 by treatment with 2,2,4,4‐tetramethylcyclobutane‐1,3‐dithione (Scheme 5).     

Efficient Iminophosphorane‐Mediated Preparation of Benzofuro[3,2‐d]pyrimidin‐4(3H)‐ones and Unexpected Ring Opening Products

The carbodiimides 4 , obtained from aza‐Wittig reactions of iminophosphorane 3 with aromatic isocyanates, reacted with secondary amines, phenols or alcohols in the presence of catalytic amounts of K₂CO₃ or sodium alkoxide to give 2‐substituted benzofuro[3,2‐d]pyrimidin‐4(3H)‐ones 6 . However, when 2,2′‐iminobis[ethanol] was used, the unexpected ring opening product 7 was formed instead of 6 . Reaction of 4 with primary amines RNH₂ (R=Et, Pr, Bu, etc.) gave guanidine intermediates 8 , which were further treated with EtONa to give only one regioisomer 9 via a base catalyzed cyclization. However, another regioisomer 11 was obtained when NH₃ or ‘small’ amines RNH₂ (R=Me, NH₂) were used in the absence of EtONa via a spontaneous cyclization of 8 .     

Syntheses of N‐[3‐(1‐methyl‐1H‐2‐imidazolyl)propyl]benzamides and N‐[3‐(1‐methyl‐1H‐2‐imidazolyl)propyl]benzenesulfonamides

A series of substituted N‐(4‐substituted‐benzoyl)‐N‐[3‐(1‐methyl‐1H‐imidazol‐2‐yl)propyl]amines ( 13 ) and N‐arylsulfonyl‐N‐[3‐(1‐methyl‐1H‐imidazol‐2‐yl)propyl]amines ( 14 ) were prepared from the reaction of 3‐(1‐methyl‐1H‐imidazol‐2‐yl)propan‐1‐amine ( 7 ) with substituted benzoyl chloride or substituted‐benzene sulfonyl chloride respectively. Compound 7 was prepared by two independent methods.     

A Regioselective Biginelli‐like Reaction Controlled by the Size of Alicyclic Mono‐ketones

A regioselective Biginelli‐like reaction of alicyclic mono‐ketones, aromatic aldehydes, and urea in ionic liquid [BPY]BF₄ has been investigated. The process is controlled by the size of alicyclic mono‐ketones and the steric hindrance of aromatic aldehydes. The reaction of cyclopentanone with urea and aromatic aldehydes afforded 7‐arylidene‐3,4,6,7‐tetrahydro‐4‐aryl‐1H‐cyclopenta[d]pyrimidin‐2(5H)‐ones ( 4 ). When cyclohexanone was used as the source of active methylene to react with urea and aldehydes with slight steric hindrance groups under the same condition, 8‐arylidene‐3,4,5,6,7, 8‐hexahydro‐4‐arylquinazolin‐2(1H)‐ones ( 6 ), a homologue of 4 , were yielded, whereas 4,8‐bisaryloc‐tahydro‐1H‐pyrimido[5,4‐i]‐quinazoline‐2,10(3H,11H)‐diones ( 7 ) were obtained via the simple one‐pot reaction of cyclohexanone, urea, and aromatic aldehydes with high steric hindrance groups. The possible transitional states and mechanism of the regioselective process were discussed.     

Yb(OTf)3: An Efficient Catalyst for the Synthesis of 11‐Aryl‐7H‐cyclopenta[b][4,7]phenanthrolin‐10(11H)‐One Derivatives

A mild and efficient method for the synthesis of 8,9‐dihydro‐11‐aryl‐7H‐cyclopenta[b][4,7]phenanthrolin‐10(11H)‐one derivatives via three‐component reaction of aromatic aldehyde, quinolin‐6‐amine and cyclopentane‐1,3‐dione is described catalyzed by Yb(OTf)₃. The features of this procedure are mild reaction conditions, good to high yields, and operational simplicity.     

Generation of Aryl(2‐lithiophenyl)methanone O‐Methyl Oximes and Their Use for the Synthesis of N‐(3‐Alkyl‐1‐aryl‐ or 1,3‐diaryl‐1H‐isoindol‐1‐yl)‐O‐methylhydroxylamines via the Reaction with Nitriles

An efficient two‐step procedure for the preparation of a new type of 1H‐isoindoles, i.e., N‐(3‐alkyl‐1‐aryl‐ or 1,3‐diaryl‐1H‐isoindol‐1‐yl)‐O‐methylhydroxylamines 5 , from readily available aryl(2‐bromophenyl)methanones 1 has been developed. Aryl(2‐bromophenyl)methanone O‐methyloximes 2 , derived from the corresponding ketones, were treated with BuLi in Et₂O at 0° to generate novel lithium compounds, aryl(2‐lithiophenyl)methanone O‐methyloximes 3 , which were allowed to react with nitriles to give the desired products 5 in moderate‐to‐fair yields.