巨磁电阻特性的研究及其在物理实验教学上的应用

阐述了巨磁电阻效应的机理,利用AA002系列巨磁电阻(GMR)器件测量了单个巨磁电阻的阻值与磁场磁感应强度的关系以及AA002系列巨磁电阻(GMR)器件的输出电压与外磁场的关系,研究了巨磁电阻效应的特性,并设计了巨磁电阻器件在物理实验教学中的实用性比较广泛的系列实验.     

Co SiO2颗粒膜的巨磁电阻效应

采用离子束溅射方法在玻璃基片上制备了一系列的Co－SiO\-2颗 粒膜样品,并对样品的巨磁电阻效应进行了研究.在Co35(SiO\-2)65(体积 百分比)颗粒膜样品中,观测到室温下近4%的巨磁电阻效应.研究了不同基片温度对巨磁电 阻效应的影响并发现,随着基片温度的升高样品的巨磁电阻效应下降.根据样品的电阻率温度关系曲线分析,在铁磁金属- 非磁绝缘介质颗粒膜中,除了电子自旋相关隧穿效应外, 可能还存在其他的导电机制. 关键词：     

巨磁电阻效应及应用设计性物理实验的研究

测量巨磁电阻阻值与磁感应强度的关系,研究巨磁电阻效应特性,介绍巨磁电阻效应的物理原理、实验方法及应用,该近代物理学的研究成果,可作为大学物理实验教学内容.     

非磁性材料磁电阻效应的研究进展

探讨了非磁性材料与磁性材料磁电阻效应的异同，分析了几种有代表性的非磁性材料的巨大磁电阻效应，概述了目前非磁材料磁电阻效应的研究和应用状况。     

Co-SiO2颗粒膜的巨磁电阻效应

采用离子束溅射方法在玻璃基片上制备了一系列的Co-SiO2颗粒膜样品,并对样品的巨磁电阻效应进行了研究.在Co35(SiO2)65(体积百分比)颗粒膜样品中,观测到室温下近4%的巨磁电阻效应.研究了不同基片温度对巨磁电阻效应的影响并发现,随着基片温度的升高样品的巨磁电阻效应下降.根据样品的电阻率-温度关系曲线分析,在铁磁金属-非磁绝缘介质颗粒膜中,除了电子自旋相关隧穿效应外,可能还存在其他的导电机制.     

高度取向石墨的巨磁电阻效应

石墨是准二维半金属材料，然而在通常细晶粒、无取向的石墨中并没有发现很大的磁电阻效应.在高度取向的石墨中发现了巨大的正磁电阻效应，在8.15 T的外磁场中，4.2，300 K温度下的磁电阻分别高达85300%和4950%.生产这一巨磁电阻效应的机制除正常磁电阻效应外，可能源于磁场诱导的类金属-绝缘体的转变 关键词： 磁电阻效应 石墨     

磁电阻效应的研究进展

介绍了磁电阻效应的研究状况和进展,总结了铁磁金属的磁电阻效应、磁性多层膜和颗粒膜的巨磁阻效应、磁隧道电阻效应及氧化物铁磁体的超大磁阻效应的理论模型,并简要分析了磁电阻效应的物理机制。     

第五讲 自旋极化输运及隧道巨磁电阻效应

简要回顾了利用量子隧道效应测定铁磁金属传导电子自旋极化率的研究历史，综述了自旋极化电子隧穿产应导致的“铁磁金属／非磁绝缘体／铁磁金属”三层平面型隧道结中的巨磁电阻效应以及“铁磁金属／非磁绝缘体”颗粒膜系统中的隧穿类型巨磁电阻效应的研究进展。     

自旋输运和巨磁电阻--自旋电子学的物理基础之一

介绍磁性纳米结构和锰氧化物中电子的自旋极化输运和巨磁电阻效应，它们是新近发展的自旋电子学的物理基础之一．着重讨论的是以下三方面的基本物理图像：磁多层结构的巨磁电阻，铁磁隧道结的隧穿磁电阻，掺杂锰氧化物的庞磁电阻效应．     

金属颗粒薄膜巨磁电阻效应的影响因素

研究金属颗粒薄膜的颗粒尺寸、磁性组分等对巨磁电阻效应的影响.在自由电子模型和自旋相关散射理论的基础上，计算了金属颗粒膜体系的电子平均散射势.在计算过程中将自旋相关项与宏观量相联系，得到了巨磁电阻效应与磁性成分比例、颗粒尺寸的关系.磁电阻效应的模拟曲线表明，增加磁性成分比例和减小磁性颗粒尺寸可增强颗粒膜的巨磁电阻效应. 关键词：     

Modelling the magnetorefractive effect in giant magnetoresistive granular and layered materials

The Zhang–Levy–Granovskii (Z–L–G) model of the magnetorefractive effect (MRE) in granular films and the Jacquet–Valet (J–V) model, originally developed for magnetic multilayers, are compared and their common origin demonstrated. Simulations in an extended Hagen–Rubens (H–R) model give new insight into the variation with wavelength of the MRE, and the relative dependence of giant magnetoresistance (GMR) and the MRE to material and experimental parameters such as bulk and interface scattering parameters, mean free paths, grain diameter, polarisation and reflection geometry is explored. The sensitivity of the size, wavelength dependence and the position of the depth of the minimum in the MRE spectra to the different parameters is verified. We establish powerful new equations to correlate the MRE and GMR, and we analyse their validity for a variety of film parameters. This suggests a new approach to the use of the MRE in sensing GMR in the films.     

Modelling the sensitivity of infrared emissivity of magnetic thin films to giant magnetoresistance

The correlation between emissivity and giant magnetoresistance (GMR) in magnetic thin films is investigated at infrared (IR) wavelengths using a thin-film model of emissivity. The sensitivity of emissivity to GMR is shown to depend upon film thickness, and agrees excellently with bulk-material results for films thicker than the material skin depth. However, for films thinner than the skin depth the sensitivity to GMR is shown to weaken. In addition, at mid-to-far IR wavelengths the spectral dependence of the correlation is investigated using a modified Drude-type expression for the refractive index combined with the thin-film model. This is applied to a multilayered GMR material, and the sensitivity of emissivity to GMR is shown to have a similar spectral dependence to that of the magnetorefractive effect. An analytical interpretation in terms of skin depth is also developed at long wavelengths, and shown to agree excellently with thin-film simulations.     

Well-defined Co clusters embedded in an Ag matrix: A model system for the giant magnetoresistance in granular films

Well-defined granular Co/Ag films have been prepared by the co-deposition of in-beam prepared Co clusters and Ag atoms. In this way we were able to study the giant magnetoresistance (GMR) as a function of mean Co cluster size for a fixed Co cluster volume fraction v_cl as well as a function of v_cl for a fixed . Mean Co cluster size has been varied between and 6.9 nm, Co cluster volume fraction between 5 and 43%. The GMR was measured in-situ at T=4.2 K in magnetic fields 1.2 T. The analysis of the GMR data obtained from these studies clearly shows that spin-dependent scattering at the Co-cluster/Ag-matrix interface is the only relevant scattering mechanism causing the GMR in our well-defined samples. Received: 21 April 1998 / Received in final form: 17 May 1998 / Accepted: 18 May 1998     

Doping of the Processable Conducting Poly(m-Aminophenol) with Inorganic Acids

Poly(m-aminophenol) (PmAP) was synthesized from m-aminophenol (mAP) in aqueous sodium hydroxide (NaOH) using ammonium persulfate (APS) as an oxidative initiator. Free standing PmAP films were cast from dimethyl sulfoxide (DMSO) solution of the polymer. Then the film was doped with various inorganic acids using a solution doping technique. Various inorganic acid doped PmAP films were characterized by ultraviolet-visible (UV-Vis), Fourier transform infrared (FTIR), and energy dispersive X-ray (EDS) spectroscopies, X-ray diffraction (XRD) analysis and elemental (C, H, N, S, O) analysis. All the results were explained on a comparative basis and the doping scheme was proposed. The DC-conductivity of the inorganic acid doped films was measured using a standard four-probe method. From the DC-conductivity measurements it was found that sulfuric acid had a better doping effect in terms of conductivity than that of the other inorganic acids used, perchloric acid and phosphoric acid. An explanation of the reason for the better doping effect of sulfuric acid than that of the other inorganic acids is given.     

有序组装超薄膜热释电性能的优化研究

报道两亲性染料半花菁(DAEP)与隔层材料氮冠醚(NC)交替LB膜的热释电效应以及掺杂金属离子（Ba2+）对LB膜热释电性能的影响.发现所测样品的热释电系数p高达58μCm-2K-1；在频率为1kHz—100kHz的范围内，其εr和tanδ的数值分别为2.34—1.96和0.08—0.04.并讨论了不同成膜方式和掺杂金属离子Ba2+对LB膜热释电性能影响的物理机理.     

含氮氟化类金刚石(FN-DLC)薄膜的研究：(Ⅲ)疏水性能分析

不同沉积条件下，在单晶硅基底上沉积了含氮氟化类金刚石(FN-DLC)薄膜，用静滴接触角/表面张力测量仪测量了水与FN-DLC膜表面的接触角.用X射线光电子能谱、Raman光谱和傅里叶变换吸收红外光谱(FTIR)分析了薄膜的组分和结构.用原子力显微镜观测了薄膜的表面形貌.结果表明，FN-DLC薄膜疏水性能主要取决于薄膜表面的化学结构、薄膜表面极化强度的强弱、以及薄膜的表面粗糙度的大小.sp³/sp²的比值减小，CF₂基团含量增加，薄膜粗糙度增加，接触角增大；反之，则接触角减小.在工艺上，沉积温度和功率的减小，气体流量比r(r=CF4/［CF₄+CH₄］)的增加，都会使水的浸润性变差，接触角增大. 关键词： 氟化类金刚石膜 疏水性 接触角     

Effect of the heat treatment on the infrared emissivity of indium tin oxide (ITO) films

Indium tin oxide (ITO) films were deposited on glass substrates at temperatures ranging from 100 °C to 400 °C by direct current magnetron sputtering. The mean infrared emissivities at the waveband of 8-14 μm were measured in process of heating and cooling between room temperature and 350 °C. Microstructure and phases of ITO films before (Group A) and after (Group B) heat treatment were characterized by SEM and XRD, respectively. Electrical properties were characterized with a four-point probe method and by Hall measurement system. During heat treatment, the infrared emissivity of the film increases with the increase of temperature, and decreases with the decrease of temperature. While, the infrared emissivity of the films decreases slightly around 250 °C in heating process. On the other hand, after heat treatment, the crystalline phases of the films have no obvious change. However, both the resistivity and the infrared emissivity of all films decrease.     

Infrared spectroscopic ellipsometry of (Pb, La)(Zr, Ti)O3 thin films on platinized silicon

Lead lanthanum zirconate titanate (PLZT) thin films with different La concentrations (x), whose composition is x/40/60, have been grown directly on Pt/Ti/SiO₂/Si (100) substrates by a modified sol-gel method. X-ray diffraction analysis shows that the PLZT thin films are polycrystalline. The infrared optical properties of the PLZT thin films have been investigated using the infrared spectroscopic ellipsometry in the spectral range of 2.5–12.5 μm. By fitting the measured ellipsometric spectra (Ψ and Δ) with a three-phase model (air/PLZT/Pt), and a derived classical dispersion relation for the thin films, the optical constants and thicknesses of the thin films have been obtained. The refractive index of the PLZT thin films decreases with increasing La concentrations, however, the extinction coefficient increases with increasing La concentrations except for the PLZT(4/40/60) thin films. The values of the effective static charge calculated for the PLZT thin films, which state that PLZT belongs to a mixed ionic-covalent compound, decrease with increasing La concentrations. Moreover, the refractive index at the wavelength of 2.5 μm changes linearly with the effective static charge. The plot of the calculated infrared optical absorption versus wavelength for the Ni/PLZT/Pt multilayer structures with various La concentrations is given and indicates that the PLZT thin films are excellent candidates for ferroelectric infrared detectors and focal plane arrays.     

Giant magnetoresistance (GMR) and ferromagnetic properties of DC and pulse electrodeposited Cu–Co alloys

Cu–Co ferromagnetic alloys occurring as granular films and exhibiting giant magnetoresistance (GMR) property have been synthesized using both DC and pulse electrodeposition techniques. The growth process of these electrodeposits comprising multiple granules of disparate morphology, magnetic features exhibits critical dependence on electrodeposition conditions. Using ferromagnetic resonance and magnetic hysteresis data, we have attempted a correlation between evolution of these electrodeposits and their ferromagnetic properties with special emphasis on GMR property.     

Structural,thermal, and electrical studies of sodium iodide (NaI)-doped hydroxypropyl methylcellulose (HPMC) polymer electrolyte films

Solid polymer electrolyte films based on hydroxypropyl methylcellulose (HPMC) complexed with sodium iodide (NaI) were prepared using solution cast method. The dissolution of the salt into the polymer host and the structural properties of pure and complexed HPMC polymer electrolyte films were confirmed by X-ray diffraction (XRD) studies. XRD results revealed that the amorphous domains of HPMC polymer matrix were increased with increase in NaI salt concentration. The degree of crystallinity was found to be high in pure HPMC samples. The thermal properties were studied using differential scanning calorimetry (DSC). DSC results revealed that the presence of NaI in the polymer matrix increases the melting temperature; however, it is observed that fusion heat is high for pure HPMC films. The variation of film morphology was examined by scanning electron microscopy. Fourier transform infrared spectral studies revealed vibrational changes that occurred due to the effect of dopant salt in the polymer. Direct current conductivity was measured in the temperature range of 313–383 K. The magnitude of electrical conductivity was found to increase with the increase in salt and temperature concentration. The data on the activation energy regions (regions I and II) indicated the dominance of ion-type charge transport in these polymer electrolyte films. The composition HPMC:NaI (5:4) is found to exhibit the least crystallinity and the highest conductivity.