Structural relaxation of Zr<Subscript>41</Subscript>Ti<Subscript>14</Subscript>Cu<Subscript>12.5</Subscript>Ni<Subscript>10</Subscript>Be<Subscript>22.5</Subscript> bulk metallic glass under high pressure

Zr₄₁Ti₁₄Cu_12.5Ni₁₀Be_22.5 bulk metallic glass (BMG) is annealed at 573 K under 3 GPa and its structural relaxation is investigated by X-ray diffraction, ultrasonic study, compression as well as sliding wear measurements. It is found that after the ZrTiCuNiBe BMG sample was annealed under high pressure, the mechanical properties were improved. Moreover, theBMG with relaxed structure exhibits markedly different acoustic properties. These results are attributed to the fact that relaxation under high-pressure results in a microstructural transformation in the BMG.     

冲击加载下Zr51Ti5Ni10Cu25Al9金属玻璃的塑性行为

进行了10—27 GPa应力范围内Zr₅₁Ti₅Ni₁₀Cu₂₅Al₉金属玻璃的平面冲击实验以研究其高压-高应变率加载下的塑性行为.由样品自由面粒子速度剖面的分析获得了冲击加载过程的轴向应力,并通过轴向应力与静水压线的比较获得剪应力.实验结果表明,尽管存在明显的松弛效应,但Zr基金属玻璃的Hugoniot弹性极限随着冲击应力的增加而增加.然而,塑性波阵面上的剪应力则显示先硬化而后软化现象,而且软化的幅度随冲击应力的增加而增加.冲击加载下Zr基金属玻璃的上述剪应力变化特征与分子动力学模拟结果比较一致,但与压剪实验结果和一维应力冲击实验结果明显不同.     

Compression behavior of Zr_(41)Ti_(14)Cu_(12.5)Ni_(10)Be_(22.5) bulk metallic glass up to 24 GPa

With the development of multicomponent Zr-based glass bulk metallic glasses(BMGs) with a larger geometry by a conventional casting process with a low coolingrate[1—4], high pressure, which is the simplest way to vary the interatomic distance ofsubstance and thus change its physical properties, has been employed as an importantmeans to investigate structural relaxation and the crystallization of the BMGs[5]. Relativeto crystalline, metallic glasses have excess free volume, which will annihil…     

Zr-based bulk metallic glass as a cylinder material for high pressure apparatuses

Zirconium-based bulk metallic glass (Zr-based BMG) has outstanding properties as a cylinder material for piston-cylinder high pressure apparatuses and is especially useful for neutron scattering. The piston-cylinder consisting of a Zr-based BMG cylinder with outer/inner diameters of 8.8/2.5?mm sustains pressures up to 1.81?GPa and ruptured at 2.0?GPa, with pressure values determined by the superconducting temperature of lead. The neutron attenuation of Zr-based BMG is similar to that of TiZr null-scattering alloy and more transparent than that of CuBe alloy. No contamination of sharp Bragg reflections is observed in the neutron diffraction pattern for Zr-based BMG. The magnetic susceptibility of Zr-based BMG is similar to that of CuBe alloy; this leads to a potential application for measurements of magnetic properties under pressure.     

Tensile behavior of post-irradiation annealed Cu–Ni alloy

The present paper investigates the tensile properties of post-irradiation annealed Cu–Ni alloy. The specimens were irradiated with a 15 MeV electron beam at room temperature and the post-irradiation annealing (PIA) of the specimens was carried out under vacuum at 450 °C for 15–120 min. The yield stress (YS), ultimate tensile stress (UTS), percentage elongation, stress relaxation rate and activation volume of both as-irradiated and post-irradiation annealed specimens were examined at room temperature using a universal testing machine. The results show that PIA of the specimen at 450 °C for 15 min decreases its YS and UTS, whereas the percentage elongation is increased. The changes in the tensile parameters become more pronounced with increases in annealing time. Effects of PIA on the stress relaxation rate and activation volume indicate that the relaxation rate of post-irradiation annealed specimens increases, and the activation volume decreases, with an increase in annealing time.     

室温下(Ga,Mn)As中载流子的自旋弛豫特性

运用飞秒时间分辨抽运-探测克尔光谱技术,研究了室温下退火及未退火(Ga,Mn)As的载流子自旋弛豫的激发能量密度依赖性,发现电子自旋弛豫时间随激发能量密度增加而增大,而在同一激发能量密度下,退火样品比未退火样品具有更短的载流子复合时间、电子自旋弛豫时间和更大的克尔转角,显示DP机理是室温下(Ga,Mn)As的电子自旋弛豫的主导机理.退火(Ga,Mn)As的超快克尔增强效应显示其在超高速全光自旋开关方面的潜在应用价值,也为(Ga,Mn)As铁磁性起源的p-d交换机理提供了证据. 关键词： (Ga Mn)As稀磁半导体 时间分辨克尔光谱 电子自旋弛豫 DP机理     

Compression behavior of Zr<Subscript>41</Subscript>Ti<Subscript>14</Subscript>Cu<Subscript>12.5</Subscript>Ni<Subscript>10</Subscript>Be<Subscript>22.5</Subscript> bulk metallic glass up to 24 GPa

The compression of a Zr₄₁Ti₁₄Cu_12.5Ni₁₀Be_22.5 bulk metallic glass (BMG) is investigated at room temperature up to 24 GPa using in-situ high pressure energy dispersive X-ray diffraction with a synchrotron radiation source. The pressure-induced structural relaxation is exhibited. It is found that below about 8 GPa, the existence of excess free volume contributes to the rapid structural relaxation, which gives rise to the rapid volumetric change, and the structural relaxation results in the structural stiffness under higher pressure.     

Rapid annealing of Fe-Si-B amorphous tapes by joule heating: Effects on magnetic and mechanical properties

We report a systematic study of relaxation effects in Fe-Si-B amorphous tapes rapidly annealed for short time at T≈800 K by Joule heating. It is found that this type of annealing in air can result in nearly the same degree of relaxation as obtained by two hours of conventional relaxation annealing in a furnace under inert gas or vacuum. The extent of relaxation as a function of current density and duration has been assessed by high precision calorimetric measurements and found to be highly reproducible. The effect of such rapid annealing on magnetic and mechanical properties are compared to those of conventional relaxation annealing for two hours at 655 K and found to be advantageous.     

Raman scattering in ion-implanted silicon exposed to rf-plasma treatment

The structural changes in implantation-amorphized silicon layers under radio-frequency (rf) discharge treatment, are studied by the Raman technique. The results are compared with those of thermally annealed samples. The rf treatment is shown to result in amorphous phase relaxation in silicon, while the thermal annealing converts a-Si into c-Si. The a-Si relaxation model under rf-plasma treatment is discussed.     

新型Pr基大块非晶及其特性研究

用铜模吸铸法获得了直径为5mm的一种新的Pr基大块非晶.与以往其他稀土-过渡金属(RE-TM)大块非晶不同的是，这种新的Pr基大块非晶具有明显的玻璃转变和稳定的过冷液相区，且其玻璃转变温度在目前已知的大块非晶中是最低的，T_g=409K.研究了该大块非晶的玻璃转变动力学，并给出了Kauzmann温度T_k、Vogel-Fulcher温度T⁰_g及脆性参数m等重要参数. 关键词： 大块非晶 玻璃转变 脆性参数m     

Optical properties of hexagonal boron nitride thin films deposited by radio frequency bias magnetron sputtering

The optical properties of hexagonal boron nitride (h-BN) thin films were studied in this paper. The films were characterized by Fourier transform infrared spectroscopy, UV--visible transmittance and reflection spectra. h-BN thin films with a wide optical band gap E_g (5.86 eV for the as-deposited film and 5.97 eV for the annealed film) approaching h-BN single crystal were successfully prepared by radio frequency (RF) bias magnetron sputtering and post-deposition annealing at 970~K. The optical absorption behaviour of h-BN films accords with the typical optical absorption characteristics of amorphous materials when fitting is made by the Urbach tail model. The annealed film shows satisfactory structure stability. However, high temperature still has a significant effect on the optical absorption properties, refractive index n, and optical conductivity σ of h-BN thin films. The blue-shift of the optical absorption edge and the increase of E_g probably result from stress relaxation in the film under high temperatures. In addition, it is found that the refractive index clearly exhibits different trends in the visible and ultraviolet regions. Previous calculational results of optical conductivity of h-BN films are confirmed in our experimental results.     

超高强块体非晶合金的研究进展

研制具有极限力学性能的金属材料一直是材料研究人员的梦想.超高强块体非晶合金是一类具有极高断裂强度(4 GPa)、高热稳定性(玻璃化转变温度通常高于800 K)和高硬度(通常高于12 GPa)的新型先进金属材料,其代表合金材料Co-Ta-B的断裂强度可达6 GPa,为目前公开报道的块体金属材料的强度记录值.本文系统地综述了该类超高强度块体非晶合金的组分、热学性能、弹性模量及力学性能,阐述了该类材料的研发历程;以弹性模量为联系桥梁,阐明了该类超高强块体非晶合金材料各物理性能的关联性,并揭示了其高强度、高硬度的价键本质.相关内容对于材料工作者了解该类超高强度金属材料的性能和特点,并推进该类材料在航空航天先进制造、超持久部件、机械加工等领域的实际应用有着重要意义.     

Ferromagnetic resonance and spin wave excitations in metallic glasses: The effects of thermal ageing and long-range magnetic ordering

New ferromagnetic resonance experiments under degenerate resonance conditions are reported for FeNiPB metallic glass ribbons in annealed and polished samples. An interpretation of these experimental results in terms of established theories in Ferromagnetic and Spin Wave Resonance Spectroscopy (FSWR) is proposed. The spin-wave analysis is used to interpret the effects of magnetic anisotropy on the lineshapes of metallic glasses before and after annealing. The conclusion is reached that a model of dipolar-coupled regions which assume a common resonance frequency band is appropriate in ferromagnetic metallic glasses. The role of surface pits scattering, microheterogeneities in chemical composition, clustering processes and long-range magnetic ordering in these systems is discussed in relation to the changes of glass properties by annealing. We also conclude that FSWR techniques are more sensitive than differential scanning calorimetry, X-ray scattering and static, magnetic techniques which are currently used to study structural relaxation in glasses.     

Characterization of stress-annealed amorphous CoFeBSi ribbons by GMI and inductance spectroscopy

The effect of tension annealing on Co₆₆Fe₄Si₁₂B₁₈ amorphous alloys was studied by means of magnetoinductance measurements. Samples annealed under stress manifested a strong decrease in transverse permeability and relaxation frequency, as compared with their as-cast alloy counterpart. Samples subsequently subjected to a further relaxation regime showed moderate improvements on both parameters. These results are interpreted on the basis of the axial anisotropy induced by the stress-annealing conditions and its influence on the low-frequency magnetization processes of the alloys.     

高温高压下冲击波淬火的锆基大块金属玻璃的相演化过程研究

 采用同步辐射能散X射线衍射技术,研究了高温高压下利用冲击波淬火技术制备的Zr₄₁Ti₁₄Cu_12.5Ni₁₀Be_22.5大块金属玻璃的相演化过程。研究结果发现：在实验压力范围内,在不同压力下试样具有相同的初始析出相Zr₂Be₁₇,但是随后的相演化过程是不同的,根据应用压力的不同,试样的相演化过程可以分为3个不同的区域;另外,试样的晶化温度随着压力的增大而升高,但是在6.0 GPa存在一个突然的下降,在此压力点试样具有不同于其它压力点的相演化过程。相演化过程的不同和晶化温度的突然下降,可能归因于在不同压力下试样具有不同的原子构型。     

Magnetic relaxation in annealed, amorphous, Co61B39 thin films

Reversible, log-time relaxation in the magnetic properties of annealed, sputtered, amorphous, Co₆₁B₃₉ thin films over a post-anneal time span of 0.1 to 8000 h is reported on. Changes in the 2.0 to 200 MHz complex permeability spectra, and the magnetic hysteresis were measured for several annealing temperatures and time periods. TEM micrographs indicate that the irreversible changes in the magnetic anisotropy of the as-deposited state produced by the initial anneal are due to changes in nanoscale morphological features. The film coercivities and anisotropies of annealed films relaxed toward values smaller than the as-deposited values with a single, but different, exponential time constant over the entire time span. The reversibility between the relaxed state and subsequent anneal states appears to depend on the relaxation of atomic scale processes unobservable by in-situ, TEM microscopy at a magnification of 100 000 X.     

Amorphization Induced High Magneto-Caloric Effect of Gd55Al20Ni25 Ternary Alloy

We report the amorphization induced high magneto-caloric effect （MCE） of recently developed Gd55Al15Ni30 bulk metallic glass （BMG）. The magnetic properties of the Gd55Al15Ni30 BMG are investigated in comparison with that of its crystalline counterpart. It is found that amorphization can increase the saturation magnetization and decrease the hysteresis of Gd55Al15Ni30 alloys, which indicate the possible enhancement of MCE. The magnetic entropy changes and the refrigerant capacity of the BMG as well as the crystalline samples is calculated directly from isothermal magnetic measurements. The results show the amorphization induced high MCE of the alloy and the excellent refrigerant efficiency of Gd55Al15Ni30 bulk metallic glass.     

Monte Carlo simulation of dual magnetic phase behavior in bulk metallic glasses

Taking magnetic clusters as magnetic units, the Monte Carlo simulation method was employed to investigate the behavior of dual magnetic phase in bulk metallic glasses (BMGs). The hysteresis loops of a BMG system containing two kinds of magnetic clusters at different temperatures were simulated. The results showed that at high temperatures, only one kind of magnetic cluster is active, however, at low temperatures, both clusters responded to the applied field, which was evidenced by a step observed in the hysteresis loop of a BMG system. The simulated magnetic behavior of the two-cluster BMG system is consistent with the experimental findings of a Nd-based bulk metallic glass with dual magnetic phases.     

Insight into the thermionic emission regimes under gold film thermal relaxation excited by a femtosecond pulse

We theoretically investigated different thermal relaxation participating in the ultrafast thermionic emission processes on gold film surface with a femtosecond pulse excitation. The thermionic emission regimes under the two temperature relaxation and the thermal diffusion relaxation were demonstrated. The simulations showed that the thermionic emission properties can be defined in the regime under two temperature relaxation by reducing the laser fluence, or widening the pulse duration or increasing the laser wavelength. It was also found that there exists a transition between the two distinct thermionic emission regimes under peculiar laser parameters of laser fluence, pulse duration and laser wavelength. The results were explained as significant intervene of laser irradiation parameters into gold film thermal relaxation processes.     

The structural and optical properties of ZnO/Si thin films by RTA treatments

ZnO/Si thin films were prepared by rf magnetron sputtering method and some of the samples were treated by rapid thermal annealing (RTA) process at different temperatures ranging from 400 to 800 °C. The effects of RTA treatment on the structural properties were studied by using X-ray diffraction and atomic force microscopy while optical properties were studied by the photoluminescence measurements. It is observed that the ZnO film annealed at 600 °C reveals the strongest UV emission intensity and narrowest full width at half maximum among the temperature ranges studied. The enhanced UV emission from the film annealed at 600 °C is attributed to the improved crystalline quality of ZnO film due to the effective relaxation of residual compressive stress and achieving maximum grain size.