Er3+:YVO4中Er3+的光谱参数计算

根据掺杂Er3+(0.5%)的YVO4样品的吸收光谱,用Jubb-Ofelt理论拟合出唯象强度参最Ωλ,并由此计算了激发能级的振子强度、自发辐射跃迁速率、荧光分支比和积分发射截面等光谱参量.并根据这些光学参量,分析了Er3+:YVO4晶体的应用价值.其中,特别是4I13/2→4I15/2, 2H11/2→4I15/2, 4S3/2→4I15/2和4F9/2→4I15/2等几个强发光能级具有较大的振子强度(大于10-6)和积分发射截面(大于10-18cm),分别分析了它们的应用前景,因此非常值得关注.并且,本文结果和Capobianco等所报道的Er3+(2.5 mol%):YVO4晶体强度参量结果很相近.而且,通过比较掺Er3+钒酸钇晶体和掺Er3+其他晶体的光学性能,可以看出钒酸钇晶体作为激光晶体的优点.最后,还根据Er3+在晶体中的对称性,利用群论讨论了Er3+在YVO4晶场中各能级的劈裂情况.     

Nearly quantum-defect-limited efficiency, resonantly pumped, Er3+:YVO₄ laser at 1593.5 nm

Nearly quantum-defect-limited laser operation of a resonantly pumped Er(3+):YVO? at 1593.5 nm is demonstrated. Maximum slope efficiency of ~85% and true CW power of ~13 W at 1593.5 nm were achieved with a beam propagation factor of M? ~ 1.05. This slope efficiency is, to the best of our knowledge, the highest efficiency ever reported for a crystalline Er-doped laser.     

Yb3+掺杂对Er3+:NaYF4上转换发光的调制作用

采用溶胶-凝胶(Sol-gel)法制备了2 mol％ Er3+、0,20和80 mol％ Yb3+共掺杂NaYF4上转换发光粉末.Er3+:NaYF4为α-NaYF4相和β-NaYF4相的混合结构,Yb3+共掺杂促进了β相到a相的转变.在976 nm半导体激光器(LD)激发下获得了对应于Er3+的2 H11/2/4 S...     

Er3+:GdVO4中Er3+离子的光谱参数计算和晶场中能级分裂的讨论

对Er3+:GdVO4样品的光谱参数以及Er3+在晶场中能级的分裂情况进行了研究.首先对样品进行了吸收光谱的测量,接着用Judd-Ofelt理论拟合出了Er3+在GdVO4晶体中的强度参量Ωt,并由此计算了跃迁的振子强度、自发辐射跃迁速率、荧光分支比和积分发射截面.通过计算结果可以发现有较多能级之间的跃迁都有大于10-6的振子强度和大于10-18 cm的积分发射截面,并且具有较高的荧光分支比,特别是2H11/2→4I15/2,4S3/2→4I15/2,4F9/2→4I15/2和4I13/2→4I15/2等几个强发光能级除了具有较大的振子强度和积分发射截面外还有很好的应用前景,因此也更加值得关注.最后还利用群论讨论了Er3+离子在GdVO4晶场中各能级的分裂情况并对各Stark子能级的Jz混杂情况进行了分析.     

YVO4/Nd:YVO4/YVO4 self-Raman laser at 1,764 nm

A diode-end-pumped composite YVO₄/Nd:YVO₄/YVO₄ crystal self-Raman laser at the second-Stokes wavelength of 1,764 nm is demonstrated. The maximum average output power of second-Stokes radiation was up to 0.99 W at a pump power of 34 W and a pulse repetition frequency of 20 kHz, corresponding to an optical conversion efficiency of 2.9 %. The highest peak power and the shortest pulse duration were 21.5 kW and 1.92 ns, respectively.     

ZnS:Er3+的激光选择激发—一种立方对称Er3+中心

本文首次报导了用激光选择激发技术研究Ⅱ-Ⅵ族化合物中三价稀土离子中心的结果.用激光选择激发技术分辨出ZnS:Er3+中一种具有立方对称的中心,确定了基态和激发态的晶场分裂。根据点电荷模型计算和实验结果,该中心的结构是Er3+离子处于填隙位置,最近邻配位体是四个带正一价电荷的电荷补偿离子.该中心的发射光谱中发现由于发射局域声子产生的声子伴线。     

纳米NaYb1-xF4:Er3+x中Er3+/Yb3+掺杂浓度变化引起的相变和发光增强

在Yb3+和Er3+共掺杂氟化物纳米体系中,2％Er3+掺杂浓度为上转换发光的最佳浓度,高于这个浓度,随着Er3+掺杂浓度的增加,将发生严重上转换发光浓度猝灭,已为人们广泛认知和接受.本文合成了不同Er3+/Yb3+掺杂浓度比的NaYb1-x F4:Er3+x系列上转换发光纳米粒子.通过扫描电镜、XRD和荧光光谱等分析...     

Diode-pumped monolithic Er3+:Yb3+:YAl3(BO3)4 micro-laser at 1.6 μm

Efficient eye-safe 1.6 μm monolithic laser was realized in a c-cut, 0.7-mm-thick Er³⁺:Yb³⁺:YAl₃(BO₃)₄ microchip end-pumped by a quasi-continuous-wave 970 nm diode laser. At incident pump peak power of 20.4 W, a maximum output peak power of 2.6 W with a slope efficiency of 19% was obtained when the waist radius of pump laser beam was 220 μm. The spectra and profiles of output beam of the Er³⁺:Yb³⁺:YAl₃(BO₃)₄ monolithic laser were measured. The influences of the waist radius of pump laser beam on the slope efficiency and threshold of the monolithic laser were also investigated.     

Nd3+:Er3+:KY(WO4)2激光晶体的生长和光谱特性

采用熔盐法从K2 WO4助熔剂体系生长出尺寸为 4 5mm的Nd3 :Er3 :KY(WO4) 2 透明晶体。从晶体中切割出Ф3× 11 9mm的激光器件 ,测量了晶体的紫外 -近红外的吸收光谱 ,从吸收光谱图上可以看到 ,晶体存在着 974 88nm ;80 1 0 (798 12 ,80 3 95 )nm ;74 8 5 (75 3 5 ,74 3 4 9)nm ;6 5 3 6 1nm ;5 86 6 5nm ;5 18 6(5 4 5 0 3,5 2 1 32 ,4 89 35 )nm ;4 5 2 80nm ;4 0 7 81nm ;36 7 2 2 (377 2 4 ,36 6 4 ,35 8 0 2 )nm九个吸收峰带 ,对各个吸收峰带按照Er3 和Nd3 离子的能级跃迁进行了归属。同时采用Edinburgh InstrumentF92 0荧光光谱仪在室温下对晶体进行了荧光测试研究。研究结果表明 ,共掺Nd3 离子可以增强Er3 :KY(WO4) 2 对半导体激光器泵浦源 (80 0nm)的吸收。     

Er3+单掺及Yb3+/Er3+双掺LaLiP4O12玻璃光谱性质研究

制备了Er3 +单掺杂及Yb3+/Er3+双掺杂四磷酸盐玻璃 ,测量了吸收光谱、荧光光谱 ,用McCumber理论计算Er3 +的发射截面 ,研究了其荧光特性、浓度猝灭及其机制、以及OH基对荧光强度和能量传递的影响 ,研究发现对四磷酸盐玻璃Yb3+的最佳浓度约为 1.82× 10 2 1ions/cm3,Er3+最佳浓度约为 0 .96× 10 2 0 ions/cm3。     

YLiF4:Er3+,Yb3+中敏化剂浓度对发光的影响

用水热法合成了YLiF4：Er^3＋,Yh^3＋,Er^3＋的浓度固定为2mol％,Yb^3＋浓度变化范围是0～7mol％。在这个浓度范围内,980nm附近的吸收随着Yb^3＋浓度的增大而增强。用980nm激发得到的上转换发光强度随Yb^3＋浓度的增大而增强。在Yb^3＋浓度低于6mol％时,上转换发光强度随Yb^3＋浓度的增大变化的比较缓慢,当Yb^3＋浓度超过6mol％时,上转换发光突然增强。以Yb^3＋浓度是2mol％的样品为代表,研究了Er^3＋对应红光、绿光发射的激发光谱,并测试了不同波长激发下的红光发射和绿光发射,证明红光发射是来源于^4F9/2→^2I15/2,绿光是来自^4S3/2→^2I15/2和^2H11/2→^2I15/2。它们的上转换过程都是双光子过程。     

Tm∶YVO4晶体中Tm3+的发光研究

测量了Tm∶YVO4 晶体的吸收光谱 ,以 34 6nm、36 3nm(1D2 )、475nm(1G4 )、6 98nm (3 F2 ,3 F3 )和 80 1nm(3 H4 )光激发时的发射光谱 ,以及位于 45 4nm (1D2 → 3 F4 )、475nm (1G4 → 3 H6)、6 46nm (1G4 → 3 F4 )、80 6nm(3 H4 →3 H6)的荧光谱线的激发光谱 ,对测量的结果进行了详细分析 ,解释了离子能级间的跃迁过程。提出了Tm∶YVO4 晶体基质与Tm3 + 之间的能量交换的概念和新的跃迁通道 ,证实了存在1D2 +3 H6→1G4 +3 F4 以及1G4 +3 H6→3 H4 +3 H5的能量传递过程 ,还可能存在交叉弛豫过程 1G4 +3 H6→3 F2 +3 F4 。这些过程使得Tm∶YVO4 晶体难以实现1D2 能级上转换发光 (4 5 4nm左右 ) ,但 475nm的上转换发光 (1G4 →3 H6)较强 ,3 F4 能级是潜在红外激光发射能级。     

The effect of Er3+-ion concentration on the Er3+ : 4I13/2 → 4I15/2 transition in tellurite glasses

The effect of Er³⁺ concentration on the Er³⁺?:?⁴I_13/2?→?⁴I_15/2 emission in tellurite glasses has been investigated. The full width at half-maximum increased with the increasing concentration of Er₂O₃ in tellurite glasses. The effect of local structure of Er³⁺ ions and related spectroscopic changes are taken into account to explain the line broadening. Inhomogeneous broadening due to the distribution of crystal field around the Er³⁺ ion has little effect on the absorption spectra. Highly efficient energy trapping between the ions was identified from the time-resolved analysis of the fluorescence decay and is found to be responsible for the extended lifetime at intermediate concentrations of Er³⁺ ions in tellurite glasses. The effect of temperature on spectral line shape has been determined for analysing the contribution of Boltzmann population on line broadening. The increased population of the overlying Stark sublevels at the ⁴I_13/2 energy level via direct pumping and/or interaction between Er³⁺ ions were also found to be significant for enhancement in spectral line shape at higher concentrations of Er³⁺ ions in tellurite glasses. It was observed that at higher concentrations of Er³⁺ ions in glass also enhance the local symmetry of ions, which is apparent from the absorption band of the Er³⁺?:?⁴I_15/2?→?²H_11/2 hypersensitive transition.     

YLiF4: Er3+, Tm3+, Yb3+中Tm3+浓度对上转换发光的影响

利用水热法合成了YLiF4: Er3 , Tm3 , Yb3 , 其中Er3 和Yb3 的浓度保持固定不变, 分别为1 mol%和1.5 mol%, Tm3 浓度变化范围是2 mol%～8 mol%. 在这种共掺杂体系中, 同时观察到了Er3 , Tm3 和Yb3 的吸收, 且Tm3 的吸收随着其浓度的增强而增强. 在980 nm光的激发下, 当Tm3 浓度很小时, 这种材料的上转换发光为白光. 其中蓝光主要来源于Tm3 的激发态1G4到基态3H6的跃迁, 绿光来源于Er3 的4S3/2和2H11/2到基态4I15/2的跃迁, 红光既来源于Tm3 的1G4→3F4的跃迁, 也来源于Er3 的4F9/2→4I15/2的跃迁. 并且这种上转换发光强度随着Tm3 浓度的增强而降低, 但对应不同能级跃迁的发光强度降低的幅度不同, 这是因为Er3 和Tm3 之间的相互作用.     

激光二极管泵浦Nd:YVO4/YVO4复合晶体绿光激光器

采用一种新型的Nd:YVO4/YVO4复合晶体,利用V型折叠腔,研究了高功率激光二极管端面泵浦的Nd:YVO4/YVO4复合晶体激光器基频1.06 μm及倍频532 nm激光的输出特性.当泵浦功率为24.6 W时,获得1.06 μm激光的最大输出功率为11.7 W,光-光转换效率为48%.当泵浦功率为17 W时,获得了5.32 W的绿光输出,光-光转换效率达到31.3%.     

可变色的ZnSe:Er3+ MIS发光二极管

本文首次利用高场和低场激发下的有效发光中心,设计和制备了随外加电压极性改变而变色的ZoSe:Er3+ MIS发光二极管。这种发光二极管在正向电压激发下得到蓝色发光,而在反向电压激发下得到绿色发光。     

LaOBr:Er3+,Tm3+红外跃迁的研究

对在基质LaOBr中分别加入Er3+和Tm3+稀土离子时的红外光谱强度随Er3+和Tm3+离子浓度的变化规律进行了研究.通过对在基质LaOBr中同时加入Er3+和Tm3+稀土离子对它们的发光强度随着浓度的变化呈现不同规律的研究,证实了发生于Er3+和Tm3+稀土离子之间的能量转移是影响Er3+和Tm3+红外发光的重要因素.并且,这种能量转移过程是以共振传递的方式进行的.另外,通过对Er3+的4S3/2能级寿命的测量,给出这种能量转移的直接证据.     

Er3+/Yb3+共掺LiNbO3晶体中Er3+的光谱特性分析

在室温下,测量了采用Czochralski方法生长的as-grown和经退火处理的Z切Er^3＋／Yb^3＋共掺同成分LiNbO3晶体的α偏振吸收光谱（300-1650nm）。运用Judd—Ofelt理论对该晶体中Er^3＋的光谱特性进行了分析。由所测得的吸收系数的积分计算得到了从基态到激发态的若干个主要的电子跃迁强度实验值。利用最小二乘法确定出Er^3＋／Yb^3＋共掺LiNbO3晶体中Er^3＋的Judd-Ofelt参数。进而确定了自发辐射概率,从激发态能级到其各个下能级的荧光分支比以及能级辐射寿命。此外,还讨论了Yb^3＋的共掺和退火处理对LiNbO3晶体中Er^3＋光谱特性的影响。     

Optical thermometry probe via fiber containing β-NaLuF4:Yb3+/Er3+/Tm3+

In this article, β-NaLuF₄:Yb³⁺/Tm³⁺/Er³⁺ were synthesized by thermal decomposition technique. Yb³⁺/Tm³⁺/Er³⁺ has been firstly manifested to fabricate the microfibers after co-doping with polymer solution. The guiding performance of a microfiber was observed under 980 nm excitation source to prove that it could be used as an active and passive waveguides. The characteristics of optical thermal sensing of Tm³⁺ and Er³⁺ ions in a single microfiber were demonstrated. The FIR method was utilized to evaluate the sensitivity of a single microfiber and maximum sensitivity of activator ions in a microfiber was achieved as 0.00124 and 0.00311 K^-1 with temperature ranging from 303 to 363 K, respectively. Our results suggest that a single microfiber has good sensing stability and has potential applications in the field of thermometry.