1, 5, 6, 7-Tetrahydro-2H-[1,4]diazepin-5,7-dione aus Malonimiden und 3-Dimethylamino-2,2-dimethyl-2H-azirin

1, 5, 6, 7-Tetrahydro-2H-[1, 4]diazepin-5, 7-diones from Malonimides and 3-Dimethylamino-2, 2-dimethyl-2H-azirine Reaction of the aminoazirine 1 with malonimides of type 7 in 2-propanol at room temperature leads to the 1,4-diazepine derivatives of type 9 (Scheme 3). The structure of 6, 6-diethyl-3-dimethylamino-2,2-dimethyl-1,5,6, 7-tetrahydro-2H- [1,4] diazepin-5, 7-dione ( 9a ) has been proved by single crystal X-ray analysis (Chapter 4). Reduction of the 7-membered heterocycle 9a with sodium borohydride yields the perhydro-[1,4]diazepin-5, 7-dione 10 , while 9a in ethanol at 60° undergoes a ring contraction to the 4 H-imidazole derivative 11a (Scheme 4): Mechanisms of these two reactions are discussed in comparison with previously reported reactions (Chapter 5).     

Additionsreaktion von 3-Dimethylamino-2,2-dimethyl-2H-azirin mit Phenylisothiocyanat

Reaction of 3-Dimethylamino-2,2-dimethyl-2H-azirine with Phenyl Isothiocyanate In contrast to the reactions of 3-dimethylamino-2,2-dimethyl-2H-azirine ( 1a ) with various isothiocyanates, leading to thiazoline derivatives, the reaction of 1a with phenyl isothiocyanate at room temperature gives 5,5-dimethyl-3-phenyl-Δ¹-imidazolin-4-dimethyliminium-2-thiolate ( 9 , Scheme 2). The structure of 9 is deduced from spectral data and reactions of this zwitterionic compound (Schemes 2 and 4).     

Reaktionen von 3-Dimethylamino-2,2-dimethyl-2H-azirin mit. NH-aciden Heterocyclen; Synthese von 4H-imidazolen

Reactions of 3-Dimethylamino-2,2-dimethyl-2H-azirine with NH-Acidic Heterocycles; Synthesis of 4H-Imidazoles In this paper, reactions of 3-dimethylamino-2,2-dimethyl-2H-azirine ( 1 ) with heterocyclic compounds containing the structure unit CO? NH? CO? NH are described. 5,5-Diethylbarbituric acid ( 5 ) reacts with 1 in refluxing 2-propanol to give the 4H-imidazole derivative 6 (Scheme 2) in 80% yield. The structure of 6 has been established by X-ray crystallography. Under similar conditions 1 and isopropyl uracil-6-carboxylate ( 7 ) yield the 4H-imidazole 8 (Scheme 3), the structure of which is deduced from spectral data and the degradation reactions shown in Scheme 3. Hydrolysis of 8 with 3N HCl at room temperature leads to the α-ketoester derivative 9 , which in refluxing methanol gives dimethyl oxalate and 5-dimethyl-amino-2,4,4-trimethyl-4H-imidazole ( 10 ). On hydrolysis the latter is converted to the known 2,4,4-trimethyl-2-imidazolin-5-one ( 11 ) [6]. Quinazolin-2,4 (1H, 3H)-dione ( 12 ) and imidazolidinetrione (parabanic acid, 14 ) undergo with 1 a similar reaction to give the 4H-imidazoles 13 and 15 , respectively (Schemes 4 and 5). In Scheme 6 two possible mechanisms for the formation of 4H-imidazoles from 1 and heterocycles of type 16 are formulated. The zwitterionic intermediate f corresponds to b in Scheme 1. Instead of dehydration as in the case of the reaction of 1 with phthalohydrazide [3], or ring expansion as with saccharin and cyclic imides [1] [2], f , undergoes ring opening (way A or B). Decarboxylation then leads to the 4H-imidazoles 17 .     

Reaktion von 3-Amino-2H-azirinen mit Diphenylcyclopropenthion. Vorläufige Mitteilung

Reaction of 3-Amino-2H-azirines with Diphenylcyclopropenethione 3-Dimethylamino-2H-azirines ( 4a , 4b ) react with diphenylcyclopropenethione ( 8 ) to give 4(3 H)-pyridinethione derivatives of type 10 (Scheme 3). The reaction mechanism for the formation of 10 is given in Scheme 3 by analogy with a previous reported one [4] [5]. Hydrolysis of the 4(3 H)-pyridinethione 10a yields 2-oxo-2, 3-dihydro-4(1 H)-pyridinethione ( 11 ) and reduction of 10a with sodium borohydride leads to the 2, 3-dihydro-4 (1 H)-pyridinethione 12 (Scheme 4). The results of the reaction of 4a , 4b and the thione 8 demonstrate the similarity to the reaction of 4a , 4b and 2 [5] (cf. Scheme 1). In contrast, the reactions of imines of type 7a with 2 and 8 , respectively, lead to different products (cf. [1] [6]).     

Synthese und Reaktionen 8-gliedriger Heterocyclen aus 3-Dimethylamino-2,2-dimethyl-2H-azirin und Saccharin bzw. Phthalimid

Synthesis and Reactions of 8-membered Heterocycles from 3-Dimethylamino-2,2-dimethyl-2H-azirine and Saccharin or Phthalimide 3-Dimethylamino-2,2-dimethyl-2H-azirine ( 1 ) reacts at 0-20° with the NH-acidic compounds saccharin ( 2 ) and phthalimide ( 8 ) to give the 8-membered heterocycles 3-dimethylamino-4,4-dimethyl-5,6-dihydro-4 H-1,2,5-benzothiadiazocin-6-one-1,1-dioxide ( 3a ) and 4-dimethylamino-3,3-dimethyl-1,2,3,6-tetrahydro-2,5-benzodiazocin-1,6-dione ( 9 ), respectively. The structure of 3a has been established by X-ray (chap. 2). A possible mechanism for the formation of 3a and 9 is given in Schemes 1 and 4. Reduction of 3a with sodium borohydride yields the 2-sulfamoylbenzamide derivative 4 (Scheme 2); in methanolic solution 3a undergoes a rearrangement to give the methyl 2-sulfamoyl-benzoate 5 . The mechanism for this reaction as suggested in Scheme 2 involves a ring contraction/ring opening sequence. Again a ring contraction is postulated to explain the formation of the 4H-imidazole derivative 7 during thermolysis of 3a at 180° (Scheme 3). The 2,5-benzodiazocine derivative 9 rearranges in alcoholic solvents to 2-(5′-dimethylamino-4′,4′-dimethyl-4′H-imidazol-2′-yl) benzoates ( 10 , 11 ), in water to the corresponding benzoic acid 12 , and in alcoholic solutions containing dimethylamine or pyrrolidine to the benzamides 13 and 14 , respectively (Scheme 5). The reaction with amines takes place only in very polar solvents like alcohols or formamide, but not in acetonitrile. Possible mechanisms of these rearrangements are given in Scheme 5. Sodium borohydride reduction of 9 in 2-propanol yields 2-(5′-dimethylamino-4′,4′-dimethyl-4′H-imidazol-2′-yl)benzyl alcohol ( 15 , Scheme 6) which is easily converted to the O-acetate 16 . Hydrolysis of 15 with 3N HCl at 50° leads to an imidazolinone derivative 17a or 17b , whereas hydrolysis with 1N NaOH yields a mixture of phthalide ( 18 ) and 2-hydroxymethyl-benzoic acid ( 19 , Scheme 6). The zwitterionic compound 20 (Scheme 7) results from the hydrolysis of the phthalimide-adduct 9 or the esters 11 and 12 . Interestingly, compound 9 is thermally converted to the amide 13 and N-(1′-carbamoyl-1′-methylethyl)phthalimide ( 21 , Scheme 7) whose structure has been established by an independent synthesis starting with phthalic anhydride and 2-amino-isobutyric acid. However, the reaction mechanism is not clear at this stage.     

Herstellung und Reaktionen der valenzpolaromeren Verbindung (4,4-Dimethyl-2-thiazolin-5-dimethyliminium)-2-thiolat ⇌ (1-Dimethylthiocarbamoyl-1-methyl-äthyl)-isothiocyanat aus 3-Dimethyl-amino-2,2-dimethyl-2H-azirin und Schwefelkohlenstoff

Synthesis and reactions of the valence polaromeric compound (4,4-dimethyl-2-thiazoline-5-dimethyliminium)-2-thiolate ? 1-dimethylthiocarbamoyl-1-methyl-ethyl isothiocyanate from 3-dimethylamino-2,2-dimethyl-2H-azirine and carbon disulfide. 3-Dimethylamino-2,2-dimethyl-2H-azirine ( 1 ) reacts with carbon disulfide to give crystals which have the dipolar structure 3a [(4,4-dimethyl-2-thiazoline-5-dimethyliminium)-2-thiolate, Scheme 1]. In solution, the non-dipolar (charge-free) isomeric form 3b (1-Dimethyl-thiocarbamoyl-1-methyl-ethyl isothiocyanate) is almost exclusively populated. Reaction products are derived from both forms: Derivatives of 3a are the hydrolysis product 6 , the sodium borohydride reduction product 7 and the methylation products 9 and 10 , respectively (Scheme 2). The isothiocyanate form 3b is responsible for the various reaction products with amines (Scheme 3). One of the reaction products with ammonia, namely 20 , is also obtained by the reaction of 1 with thiocyanic acid. Thermolysis of the azirine/carbon disulfide adduct 3 leads to 2-dimethylamino-4,4-dimethyl-2-thiazoline-5-thione ( 17 ) in high yield. A possible mechanism is outlined in Scheme 4. The same compound is also formed by rearrangement of 3 under the catalytic influence of dimethylamine. Its structure has been established by X-ray crystallography (section 4). Again a rearrangement is involved in the reductive (NaBH₄) conversion of 17 to 7 , the direct reduction product of the dipolar species 3a (Scheme 5). The isothiocyanate form 3b is able to react with a second molecule of 3-dimethylamino-2,2-dimethyl-2H-azirine ( 1 ) to yield compound 25 , which in the crystalline or dissolved state appears to be almost entirely populated by the carbodiimide form with structure 25b (Scheme 7), though all reaction products of 25 (reduction with sodium borohydride, addition of water or hydrogen sulfide, Schemes 7 and 8) are derived from the dipolar form 25a , not detectable as such; here again therefore there is a dynamic equilibrium 25a ? 25b . The two forms of adduct 3 , namely 3a and 3b , are obviously very easily interconverted at room temperature and therefore can be considered as valence polaromeric forms (section 5). A classification of the dipolar (zwitterionic) form is given, which allows a comparison of various dipolar species and gives as indication of charge stabilization by delocalization. The versatile reactivity of the 3-dimethylamino-2,2-dimethyl-2H-azirine/carbon disulfide adduct is demonstrated by the fact that with simple reagents approximately 25 derivatives have been obtained, most of them being new heterocyclic compounds.     

Additionsreaktionen von 3-Dimethylamino-2,2-dimethyl-2H-azirin an Isothiocyanate

Addition Reactions of 3-Dimethylamino-2, 2-dimethyl- 2 H-azirine and Isothiocyanates. The title azirine readily reacts with two molecules of benzyl- or methylisothiocyanate to form the zwitterionic 1:2 addition compounds 4 and 13 , respectively (Scheme 2). The presumed 1:1 addition products, which are intermediates in the formation of 4 and 13 , cannot be detected. The structure of 4 and 13 follows from their spectroscopic and chemical properties. With water they give the thiourea derivates 5 and 14 , respectively; treatment with aqueous acid leads to the Δ²-1, 3-thiazolin-5-on-derivates 7 and 15 , respectively. With sodium borohydride compounds 8 and 16 , respectively, are obtained (Scheme 2). The zwitterionic compounds 4 and 13 are able to react further with one molecule of the isothiocyanates to give, in high-yield, triazines 9 and 18 , respectively (Scheme 3). The structure of these compounds was again derived from their spectroscopic data. The mechanism for the formation of 9 and 18 is given in Scheme 3. Acid catalysed hydrolysis of 9 and 18 lead to the trithiocyanuric acid derivates 12 and 20 , and to the spiro compounds 11 and 19 , respectively (Sceme 6). Reaction of 4 with one molecule of phenylisocyanate gives triazine 10 (Scheme 5). According to the X-ray analysis of the methyl compound 18 , there are strong steric interactions in this molecule which are due to the side chain. This is demonstrated by the small distances between C(2) … C(13), N(7) … C(11), and C(8) … C(11) (Table 4). These steric interactions, in addition, cause widening of the bond angles N(1)? C(2)? N(7) and C(9)? N(10)? C(11) (Fig.2). Furthermore, the triazine ring is no longer planar. This deformation of the ring diminishes repulsion between the methyl groups C(13) and C(15).     

First Examples of Reactions of Azole N-Oxides with Thioketones: A Novel Type of Sulfur-Transfer Reaction

The reactions of 1,4,5-trisubstituted imidazole 3-oxides 1a – k with cyclobutanethiones 5a , b in CHCl₃ at room temperature give imidazole-2(3H)-thiones 9a – k in high yield. The second product formed in this reaction is 2,2,4,4-tetramethylcyclobutane-1,3-dione ( 6a ; Scheme 2). Similar reactions occur with 1 and adamantanethione ( 5c ) as thiocarbonyl compound, as well as with 1,2,4-triazole-4-oxide derivative 10 and 5a (Scheme 3). A reaction mechanism by a two-step formation of the formal cycloadduct of type 7 via zwitterion 16 is proposed in Scheme 5. Spontaneous decomposition of 7 yields the products of this novel sulfur-transfer reaction. The starting imidazole 3-oxides are conveniently prepared by heating a mixture of 1,3,5-trisubstituted hexahydro-1,3,5-triazines 3 and α-(hydroxyimino) ketones 2 in EtOH (cf. Scheme 1). As demonstrated in the case of 9d , a `one-pot' procedure allows the preparation of 9 without isolation of the imidazole 3-oxides 1 . The reaction of 1c with thioketene 12 leads to a mixture of four products (Scheme 4). The minor products, 9c and the ketene 15 , result from an analogous sulfur-transfer reaction (Path a in Scheme 5), whereas the parent imidazole 14 and thiiranone 13 are the products of an oxygen-transfer reaction (Path b in Scheme 5).     

New Results in the Synthesis of Styrylazulene Derivatives: Application of the ‘Anil synthesis’ to the preparation of azulenes substituted with styryl groups at the seven-membered ring

The synthesis of 4,6,8-trimethyl-1-[(E)-4-R-styryl]azulenes 5 (R=H, MeO, Cl) has been performed by Wittig reaction of 4,6,8-trimethylazulene-1-carbaldehyde ( 1 ) and the corresponding 4-(R-benzyl)(triphenyl)phosphonium chlorides 4 in the presence of EtONa/EtOH in boiling toluene (see Table 1). In the same way, guaiazulene-3-carbaldehyde ( 2 ) as well as dihydrolactaroviolin ( 3 ) yielded with 4a the corresponding styrylazulenes 6 and 7 , respectively (see Table 1). It has been found that 1 and 4b yield, in competition to the Wittig reaction, alkylation products, namely 8 and 9 , respectively (cf. Scheme 1). The reaction of 4,6,8-trimethylazulene ( 10 ) with 4b in toluene showed that azulenes can, indeed, be easily alkylated with the phosphonium salt 4b . 4,6,8-Trimethylazulene-2-carbaldehyde ( 12 ) has been synthesized from the corresponding carboxylate 15 by a reduction (LiAlH₄) and dehydrogenation (MnO₂) sequence (see Scheme 2). The Swern oxidation of the intermediate 2-(hydroxymethyl)azulene 16 yielded only 1,3-dichloroazulene derivatives (cf. Scheme 2). The Wittig reaction of 12 with 4a and 4b in the presence of EtONa/EtOH in toluene yielded the expected 2-styryl derivatives 19a and 19b , respectively (see Scheme 3). Again, the yield of 19b was reduced by a competing alkylation reaction of 19b with 4b which led to the formation of the 1-benzylated product 20 (see Scheme 3). The ‘anil synthesis’ of guaiazulene ( 21 ) and the 4-R-benzanils 22 (R=H, MeO, Cl, Me₂N) proceeded smoothyl under standard conditions (powered KOH in DMF) to yield the corresponding 4-[(E)-styryl]azulene derivatives 23 (see Table 4). In minor amounts, bis(azulen-4-yl) compounds of type 24 and 25 were also formed (see Table 4). The ‘anil reaction’ of 21 and 4-NO₂C₆H₄CH=NC₆H₅ ( 22e ) in DMF yielded no corresponding styrylazulene derivative 23e . Instead, (E)-1,2-bis(7-isopropyl-1-methylazulen-4-yl)ethene ( 27 ) was formed (see Scheme 4). The reaction of 4,6,8-trimethylazulene ( 10 ) and benzanil ( 22a ) in the presence of KOH in DMF yielded the benzanil adducts 28 to 31 (cf. Scheme 5). Their direct base-catalyzed transformation into the corresponding styryl-substituted azulenes could not be realized (cf. Scheme 6). However, the transformation succeeded smoothly with KOH in boiling EtOH after N-methylation (cf. Scheme 6).     

Struktur des Hydrazinolyseproduktes von N-(3-Oxo-1-isoindolinyliden)-alanin-äthylester

Hydrazinolysis of N-(3-Oxo-1-isoindolinyliden)alanin Ethyl Ester, Structure of the Product Treatment of N-(3-oxo-1-isoindolinyliden)alanin ethyl ester (6) with hydrazine hydrate leads to 4-methyl-2,3,4,6-tetrahydro[1,2,4]triazino[3,4-a]isoindole-3, 6-dione ( 8 , Scheme 3) and not to the previously postulated 6-hydroxy-2-methyl-2,3-dihydro-imidazo [2,1-a]phthalazin-3-one ( 7 , cf. [2]). The structure of 8 has been established by an independent synthesis as well as by the X-ray analysis of the reaction product 11 from 8 and 3-dimethylamino-2,2-dimethyl-2 H-azirine ( 1 , Scheme 4). A reaction mechanism for the formation of 8 from 6 is suggested in Scheme 5.     

Eine einfache Allencarbonsäureester-Synthese mittels der Wittig-Reaktion

A Simple Synthesis of Alkyl Allenecarboxylates (Allenic Esters) by the Wittig-Reaction A simple one-pot synthesis of variously substituted α-allenic esters ( 7–23 , cf. Scheme 4) is described. Either of the phosphonium salts 1 and 2 or the phosphoranes 3–6 in methylene chloride (or acetonitrile) when treated with acid chlorides at room temperature in the presence of triethylamine give the corresponding allenic compounds in fairly good yields (cf. Tables 3a and 3b). This procedure shows for the first time, that the Wittig-reaction with acid chlorides as starting material can also be used for the synthesis of 2-H-substituted allenic esters ( 7–13 ; for numbering see Scheme 7). The deuterium labeled compounds 26–31 (cf. Scheme 7) are prepared in the same manner. The course of the reaction involves an in situ generation of ketenes which are trapped by the resonance stabilized phosphonium ylides. The thus formed betains readily decompose, already at room temperature, to the anticipated allenes by the well known Wittig-reaction.     

A Detailed Investigation of the Reaction of 5,9-Diphenylbenz[a]azulene with Dialkyl Acetylenedicarboxylates Leading to Dialkyl 8,12-Diphenylbenzo[a]heptalene-6,7-dicarboxylates

The synthesis of 5,9-diphenylbenz[a]azulene ( 1 ) from 1,3-diphenylcyclopent[a]indene-2,8-dione ( 4 ) and cyclopropene has been re-investigated. The reduction of the decarbonylated cycloadduct 5 with LiAlH₄/AlCl₃ in Et₂O leads not only to the expected 7,10-dihydrobenz[a]azulene 6 , but also to small amounts of the cyclopropa[b]fluorenes exo- 7 and endo- 7 (cf. Scheme 2), the structures of which have been determined by X-ray crystal-structure analysis (cf. Fig. 1). The reaction of 1 with dialkyl acetylenedicarboxylates (ADR) in MeCN at 100° in the presence of 2 mol-% of catalysts such as [RuH₂(PPh₃)₄] results mainly in the formation of the expected 8,12-diphenylbenzo[a]heptalene-6,7-dicarboxylates 3 . A thorough investigation of the reaction mixture of 1 and dimethyl acetylenedicarboxylate (ADM) revealed the presence of a number of intermediates and side products (Scheme 5). Most important was the isolation and identification of the cyclobutene intermediate 9a (cf. Fig. 4), which is formed by a zwitterionic rearrangement of the primary adduct 2a of 1 and ADM and represents the direct precursor of the heptalene-diester 3a . Compounds of type 9a have so far only been postulated as necessary intermediates in the thermal reaction of azulenes and ADR to give corresponding heptalenedicarboxylates. Compound 9a is photochemically unstable and undergoes rearrangement even under the influence of normal laboratory light into a mixture of trans- 10a and cis- 10a (Scheme 8). Both diastereoisomers are also found in the original reaction mixture of 1 and ADM, but not when the reaction is performed under exclusion of light. On heating in MeCN at 100°, or better in DMF at 150°, trans- 10a and cis- 10a undergo rearrangement to the fluoranthene-1,2-dicarboxylate 11a (Scheme 9), which is also present in the original reaction mixture of 1 and ADM. The catalysts do not accelerate the reaction of 1 and ADR, but they lead to better yields of the benzo[a]heptalene-6,7-dicarboxylates 3 , especially in the reaction of 1 with diisopropyl acetylenedicarboxylate (ADiP) (cf. Tables 1 and 2).     

Protolytic Opening of Two Diastereoisomeric Cyclopropanols

Cob(I) alamin ( 1(I) )-catalyzed reduction of the aldehyde 2 led to the two crystalline cyclopropanols 3 and 4 (see Scheme 2). The protolytic ring-opening starting from 3 produced the saturated aldehydes 6 and 7;8 was formed in traces only (see Scheme 3). The protolysis starting from 3 led, therefore, mainly to retention of configuration at the spiro C-atom ( 7 ); ring-opening with inversion was observed in traces only ( 8 ). Starting from 4 , the protolysis produced 9 and 7 ; the absence of 8 showed this protolysis to proceed 9 and 7 ; the absence of 8 showed this protolysis to proceed exclusively with inversion of configuration at the spiro center. Of the p-bromobenzoate 5 (cf. Scheme 2) the structure has been determined by X-ray analysis.     

Photoreaktionen von 1-Alkylbenztriazolen

The irradiation of benzotriazoles (cf. Scheme 2) with light of 225–325 nm in protic and in aromatic solvents was investigated. In aqueous 0.1N H₂SO₄ benzotriazole ( 5 ) and 1-methyl-benzotriazole ( 6 ) yielded 2-amino- and 2-methylaminophenol ( 25 and 26 ), respectively (Scheme 3). In 2-propanol 6 , 5-chloro- and 6-chloro-1-methyl-benzotriazole ( 14 and 15 ) were reduced to N-methylaniline, 4-chloro- and 3-chloro-N-methyl-aniline ( 27 , 28 and 29 ), respectively (Scheme 4). When the benzotriazoles were irradiated in aromatic solvents only C, C coupling products were observed (cf. Scheme 6 and Tables 1–4). It is of importance that 5-chloro-1-methyl-benztriazole ( 14 ) when decomposed photolytically in benzene solution yielded only 4-chloro-2-phenyl-N-methyl-aniline ( 49 ) and its 6-chloro isomer only 5-chloro-2-phenyl-N-methyl-aniline ( 50 ), i.e. the intervention of benzo-1H-azirine intermediates (e.g. 53 , Scheme 8) can be excluded. The substitution patterns which are observed when 6 is irradiated in toluene, anisole, fluoro-, chloro-, bromobenzene and benzonitrile (cf. Table 4) can best be explained by assuming that 6 , after loss of nitrogen, forms a diradical intermediate in the singlet state with highly zwitterionic character. 1-(1′-Alkenyl)-benzotriazoles (cf. Table 7) form on irradiation in cyclohexane solution indoles by intramolecular ring closure of the diradical intermediate and proton shift. After irradiation of 1-decyl-benzotriazole ( 8 ) in a glassy matrix at 77K a 7-line ESR. spectrum characteristic of a triplet radical is observed. This is in agreement with the fact that the lowest lying state of intermediates of type 2 (Scheme 1) should be a triplet state (cf. [21] [26]).     

Reaktion von 3-Dimethylamino-2,2-dimethyl-2H-azirin mit Barbitursäure

Reaction of 3-Dimethylamino-2,2-dimethyl-2H-azirine with Barbituric Acid The reaction of 3-dimethylamino-2,2-dimethyl-2H-azirine (1) with barbituric acid (4) in dimethyl formamide at room temperature yields a mixture of several compounds. The two main products 5 and 6 have been isolated in 40 and 10% yield, respectively, and their structures established by X-ray analysis. In Schemes 4–6 reaction mechanisms for the formation of 5 and 6 are postulated, the first step beeing either a C- or an N-alkylation of barbituric acid. Reduction of 5 and 6 with NaBH₄ in ethanol at room temperature yields 6,6-dimethyl-1,5,6,7-tetrahydro-pyrrolo[2,3-d]pyrimidin-2,4(3H)-dione (7) and 3,3-dimethyl-2,3-dihydro-imidazo[1,2-c]pyrimidin-5,7(1H, 6H)-dione (8) in 38 and 48% yield, respectively. Treatment of 6 with 3N aqueous NaOH at room temperature gives 3,3-dimethyl-imidazo[1,2-c]pyrimidin-2,5,7 (1H, 3H, 6H)-trione (9) in 51% yield (Scheme 3).     

Formation of Heptaleno[1,2-c]furans and Heptaleno[1,2-c]furanones

The dehydrogenation reaction of the heptalene-4,5-dimethanols 4a and 4d , which do not undergo the double-bond-shift (DBS) process at ambient temperature, with basic MnO₂ in CH₂Cl₂ at room temperature, leads to the formation of the corresponding heptaleno[1,2-c]furans 6a and 6d , respectively, as well as to the corresponding heptaleno[1,2-c]furan-3-ones 7a and 7d , respectively (cf. Scheme 2 and 8). The formation of both product types necessarily involves a DBS process (cf. Scheme 7). The dehydrogenation reaction of the DBS isomer of 4a , i.e., 5a , with MnO₂ in CH₂Cl₂ at room temperature results, in addition to 6a and 7a , in the formation of the heptaleno[1,2-c]-furan-1-one 8a and, in small amounts, of the heptalene-4,5-dicarbaldehyde 9a (cf. Scheme 3). The benzo[a]heptalene-6,7-dimethanol 4c with a fixed position of the C?C bonds of the heptalene skeleton, on dehydrogenation with MnO₂ in CH₂Cl₂, gives only the corresponding furanone 11b (Scheme 4). By [²H₂]-labelling of the methanol function at C(7), it could be shown that the furanone formation takes place at the stage of the corresponding lactol [3-²H₂]- 15b (cf. Scheme 6). Heptalene-1,2-dimethanols 4c and 4e , which are, at room temperature, in thermal equilibrium with their corresponding DBS forms 5c and 5e , respectively, are dehydrogenated by MnO₂ in CH₂Cl₂ to give the corresponding heptaleno[1,2-c]furans 6c and 6e as well as the heptaleno[1,2-c]furan-3-ones 7c and 7e and, again, in small amounts, the heptaleno[1,2-c]furan-1-ones 8c and 8e , respectively (cf. Scheme 8). Therefore, it seems that the heptalene-1,2-dimethanols are responsible for the formation of the furan-1-ones (cf. Scheme 7). The methylenation of the furan-3-ones 7a and 7e with Tebbe's reagent leads to the formation of the 3-methyl-substituted heptaleno[1,2-c]furans 23a and 23e , respectively (cf. Scheme 9). The heptaleno[1,2-c]furans 6a, 6d , and 23a can be resolved into their antipodes on a Chiralcel OD column. The (P)-configuration is assigned to the heptaleno[1,2-c]furans showing a negative Cotton effect at ca. 320 nm in the CD spectrum in hexane (cf. Figs. 3–5 as well as Table 7). The (P)-configuration of (–)- 6a is correlated with the established (P)-configuration of the dimethanol (–)- 5a via dehydrogenation with MnO₂. The degree of twisting of the heptalene skeleton of 6 and 23 is determined by the Me-substitution pattern (cf. Table 9). The larger the heptalene gauche torsion angles are, the more hypsochromically shifted is the heptalene absorption band above 300 nm (cf. Table 7 and 8, as well as Figs. 6–9).     

Additionsreaktionen von 3-Dimethylamino-2,2-dimethyl-2H-azirin an Phenylisocyanat und Diphenylketen

Addition Reaction of 3-Dimethylamino-2,2-dimethyl-2H-azirine with Phenylisocyanate and Diphenylketene 3-Dimethylamino-2,2-dimethyl-2H-azirine ( 1a ) reacts with carbon disulfide and isothiocyanates with splitting of the azirine N(1), C(3)-double bond to give dipolar, fivemembered heterocyclic 1:1 adducts. In some cases, these products can undergo secondary reactions to yield 1:2 and 1:3 adducts. In this paper it is shown that the reaction of 1a with phenylisocyanate also takes place by cleavage of the N(1), C(3)-bond, whereas with diphenylketene N(1), C(2)-splitting is observed. The reaction of 1a and phenylisocyanate in hexane at room temperature yields the 1:3 adduct 2 in addition to the trimeric isocyanate 3 (Scheme 1). A mechanism for the formation of 2 is given in Scheme 5. Hydrolysis experiments with the 1:3 adduct 2 , yielding the hydantoins 4–6 and the ureas 7 and 8 (Schemes 3 and 5), show that the formation of this adduct via the intermediates d , e and f is a reversible reaction. The aminoazirines 1a and 1b undergo an addition reaction with diphenylketene to give the 3-oxazolines 14 (Scheme 8), the structure of which has been established by spectral data and oxidative degradation of 14a to the 3-oxazolin-2-one 15 (R¹ ? R² ? CH₃, Scheme 9).     

Thermal Reactions of Guaiazulene and Its 3-Methyl Derivative with Dimethyl Acetylenedicarboxylate

The thermal reaction of 7-isopropyl-1,3,4-trimethylazulene (3-methylguaiazulene; 2 ) with excess dimethyl acetylenedicarboxylate (ADM) in decalin at 200° leads to the formation of the corresponding heptalene- ( 5a/5b and 6a/6b ; cf. Scheme 3) and azulene-1,2-dicarboxylates ( 7 and 8 , respectively). Together with small amounts of a corresponding tetracyclic compound (‘anti’- 13 ) these compounds are obtained via rearrangement (→ 5a/5b and 6a/6b ), retro-Diels-Alder reaction (→ 7 and 8 ), and Diels-Alder reaction with ADM (→ ‘anti’- 13 ) from the two primary tricyclic intermediates ( 14 and 15 ; cf. Scheme 5) which are formed by site-selective addition of ADM to the five-membered ring of 2 . In a competing Diels-Alder reaction, ADM is also added to the seven-membered ring of 2 , leading to the formation of the tricyclic compounds 9 and 10 and of the Diels-Alder adducts ‘anti’- 11 and ‘anti’- 12 , respectively of 9 and of a third tricyclic intermediate 16 which is at 200° in thermal equilibrium with 9 and 10 (cf. Scheme 6). The heptalenedicarboxylates 5a and 5b as well as 6a and 6b are interconverting slowly already at ambient temperature (Scheme 4). The thermal reaction of guaiazulene ( 1 ) with excess ADM in decalin at 190° leads alongside with the known heptalene- ( 3a ) and azulene-1,2-dicarboxylates ( 4 ; cf. Schemes 2 and 7) to the formation of six tetracyclic compounds ‘anti’- 17 to ‘anti’- 21 as well as ‘syn’- 19 and small amounts of a 4:1 mixture of the tricyclic tetracarboxylates 22 and 23 . The structure of the tetracyclic compounds can be traced back by a retro-Diels-Alder reaction to the corresponding structures of tricyclic compounds ( 24--29 ; cf. Scheme 8) which are thermally interconverting by [1,5]-C shifts at 190°. The tricyclic tetracarboxylates 22 and 23 , which are slowly equilibrating already at ambient temperature, are formed by thermal addition of ADM to the seven-membered ring of dimethyl 5-isopropyl-3,8-dimethylazulene-1,2-dicarboxylate ( 7 ; cf. Scheme 10). Azulene 7 which is electronically deactivated by the two MeOCO groups at C(1) and C(2) shows no more thermal reactivity in the presence of ADM at the five-membered ring (cf. Scheme 11). The tricyclic tetracarboxylates 22 and 23 react with excess ADM at 200° in a slow Diels-Alder reaction to form the tetracyclic hexacarboxylates 32 , ‘anti’- 33 , and ‘anti’- 34 (cf. Schemes 10–12 as well as Scheme 13). A structural correlation of the tri- and tetracyclic compounds is only feasible if thermal equilibration via [1,5]-C shifts between all six possible tricyclic tetracarboxylates ( 22, 23 , and 35–38 ; cf. Scheme 13) is assumed. The tetracyclic hexacarboxylates 32 , ‘anti’- 33 , and ‘anti’- 34 seem to arise from the most strained tricyclic intermediates ( 36–38 ) by the Diels-Alder reaction with ADM.     

Unexpected Products from the Reaction of 2,2,4,4- Tetramethylcyclobutane-1,3-dione with the Ma˛kosza Reagent

Reaction of 2,2,4,4-tetramethylcyclobutane-1,3-dione ( 2 ) under phase-transfer-catalysis (PTC) conditions (CHCl₃/aqueous NaOH) yielded a complex mixture of unexpected products (Scheme 2). From the organic phase, three ring-enlarged products 7 – 9 with a cyclopentane-1,3-dione (cf. 7 and 9 ) or a cyclopentenone skeleton (cf. 8 ) were isolated in low yield. After acidification of the aqueous phase, the oily residue was treated with CH₂N₂, and methyl 3-oxopentanoate 12 and dimethyl 2-hydroxybutanedioate 13 were obtained in almost equal amounts. The structures of 8 and 9 were established by X-ray crystal-structure analysis (Fig.). Mechanisms for the formation of the products, initiated by nucleophilic attack of trichloromethanide ion and opening of the cyclobutane ring, are proposed in Schemes 3 and 4.     

Zur Photochemie von 1, 2-Benzisoxazolen in stark saurer Lösung

On the Photochemistry of 1, 2-Benzisoxazoles in Strongly Acidic Solution The 1, 2-benzisoxazoles 1a, 1b and 1d when dissolved in 96% sulfuric acid and irradiated through a quartz filter with a mercury high-presure lamp yield, after work-up, mixtures of 2, 5- and 2, 3-dihydroxy-acylbenzenes ( 2 and 3 , respectively; cf. Schemes 1 and 3 and Table 1). Irradiation of 3, 5-dimethyl-1, 2-benzisoxazole ( 1c ) in 96% sulfuric acid leads to the formation of 2, 3-dihydroxy-5-methyl-acetophenone ( 3c ) in only 6% yield (cf. Table 1). It is assumed that the 1, 2-benzisoxazolium ions react in the excited singlet state by heterolytic cleavage of the N, O-bond to yield the corresponding aryl oxenium ions 7 in the singlet ground state (see Scheme 5). Reaction of 7 with HSO ₄ ? ions, present in 96% sulfuric acid, yields, after hydrolysis, the dihydroxy compounds 2 and 3 . Photolysis of 3-methyl-1, 2-benzisoxazole ( 1b ) in diluted sulfuric acid (0,5 to 9 M ) in methanol or water leads only to the formation of 2-amino-phenol ( 6 ; see Scheme 3), presumable via photo-isomerization of 1b to 2-methylbenzoxazole ( 5b ) which then is hydrolyzed to give 6 .