熔融法合成2-芳氧甲基苯并咪唑化合物

以邻苯二胺和芳氧基乙酸为原料, 采用熔融法合成出了10种2-芳氧甲基苯并咪唑化合物, 并利用IR和1H NMR对其结构进行了表征. 在熔融法的合成中, 两种原料物质的量之比为n(邻苯二胺)∶n (芳氧乙酸)＝1∶1.1, 反应温度为(180±5) ℃. 该合成方法具有操作简便、反应时间短、后处理容易、副产物少、产率较高、绿色环保等优点.     

Determined GA by FI‐CE in Luminol‐H2O2 System

It was found that the chemiluminescence arising from the reaction of luminol with H₂O₂ involving Co(II)‐catalyzed in alkaline solution could be strongly inhibited by gibberellic acid. Based on this observation, a new flow injection chemiluminescence method is proposed for the determination of gibberellic acid. The detection limits of the method are 0.09 ng mL^?1 gibberellic acid. The method was successfully applied to the determination of gibberellic acid in bacteria‐free culture liquid.     

Synthesis of poly(2-cyclohexenone-4-yl methacrylate) and acidolysis of pendant protecting groups in the polymer

4-Acetoxy-2-cyclohexenone (ACH) and 2-cyclohexenone-4-yl methacrylate (CHM) were obtained from the condensation reaction of 4-bromo-2-cyclohexenone (BCH) with acetic acid and methacrylic acid using 1,8-diazabicyclo-[5,4,0]-7-undecene (DBU), respectively. Poly(2-cyclohexenone-4-yl methacrylate) ( P-1 ) containing acid-sensitive 2-cyclohexenone-4-yl group was prepared from the radical polymerization of CHM and the esterification of poly(methacrylic acid) with BCH using DBU. Furthermore, P-1 and CHM copolymers ( P-2 and P-3 ) were easily synthesized from the radical polymerization of methacrylic acid and comonomers in dimethylsulfoxide using 1 mol % of 2,2′-azobis (isobutyronitrile) followed by esterification of the resulting polymers with BCH using DBU by one-pot method. The deprotection reaction of ACH and P-1 was carried out in dichloromethane using an acid catalyst. The reaction proceeded smoothly in solution to give phenol and the corresponding carboxylic acid. Therefore, the 2-cyclohexenone-4-yl group is a useful protecting group for carboxylic acids, because the protection and deprotection reactions are very easy. In the case of polymer films, however, the acid was trapped by carbonyl group on the 2-cyclohexenone-4-yl group, and did not cause the deprotection reaction. © 1993 John Wiley & Sons, Inc.     

固体超强酸ZrO_2/S2O_8~(2-)催化合成肉桂酸甲酯

研究了在固体超强酸ZrO2/S2O2-8催化下,肉桂酸与甲醇作用合成肉桂酸甲酯的工艺.考查了催化剂的用量、酸醇摩尔比、反应时间及催化剂的性能对反应的影响.最佳反应条件为∶n(肉桂酸)∶n(甲醇)=1∶10,m(肉桂酸)∶m(催化剂)=3∶1,反应温度90～95℃,反应时间5h,酯化率为95.7%.     

Synthesis of Dehydroabietic Acid (2-Acryloyloxy) Ethyl Ester in Ionic Liquids

A simple ionic liquid methodology for the synthesis of a novel derivative of dehydroabietic acid is described. 1-Butyl-3-methylimidazolium tetrafluoroborate [bmim]BF₄, a typical ionic liquid, was used as an efficient and environmentally benign solvent in the synthesis of dehydroabietic acid (2-acryloloxy) ethyl ester by O-acylation reaction of dehydroabietic acid chloride with 2-hydroxyethyl acrylate. This new method showed the advantages of mild reaction conditions, short reaction times, good yields, and recyclable solvent.     

Synthesis of 2-[2H]-2-(1-methylalkyl)succinic acids

We describe a specific procedure for the synthesis of deuterium-labelled 2-(1-methylalkyl)succinate established via alkylation of diethyl malonate,Krapcho decarboxylation reaction with D_2O and hydrolysis reaction.Two novel compounds,2-[~2H]-2-ethylsuccinic acid and 2-[~2H]-2-(1-methylheptyl)succinic acid were prepared via this synthetic route and characterized by mass spectrometry and 'H NMR.The results showed that the 2-(1-methylalkyl)succinic acids were deuterated at the β-position,which is considered as an important reaction centre in the anaerobic degradation of n-alkanes.     

Lewis acid mediated reactions of 1-cyclopropyl-2-arylethanones with allenic esters: a facile synthetic protocol for the preparation of dihydrofuro[2,3-h]chromen-2-one derivatives

TMSOTf-mediated reactions of 1-cyclopropyl-2-arylethanones with allenic esters afford a novel method for the synthesis of dihydrofuro[2,3-h]chromen-2-one derivatives in moderate to good yields. This process is a sequential reaction involving a nucleophilic ring-opening reaction of the cyclopropane by H(2)O, two intermolecular aldol-type reactions and one intramolecular aldol-type reaction, a cyclic transesterification, dehydration, and aromatization mediated by Lewis acid.     

Synthesis of substituted 2-(2-oxopyrrolidin-1-yl)acetamides

The reaction of chloroacetamide with 2 equiv of γ-aminobutyric acid potassium salts provides a convenient method for the synthesis of substituted 4-[(2-amino-2-oxoethyl)amino]butanoic acids. Alkylation products of 2-aminoacetic and 3-aminopropanoic acid with chloroacetamide were isolated. Thermal cyclization of substituted 4-[(2-amino-2-oxoethyl)amino]butanoic acids afforded 2-(2-oxopyrrolidin-1-yl)acetamides.     

Synthesis of 2-propyloxazole and 2-propyloxazole-4-carboxylic acid derivatives

2-Propyloxazole (VI) was obtained in a number of steps starting from butyronit rile. The hydrazide and amide were obtained from ethyl 2-propyloxazole-4-carboxylate; the amide was converted to the nitrile, from which the thioamide and amidoxime were obtained by the usual method. Attempts to convert VI to 2-propylisonicotinic acid or its nitrile by the reaction of VI with acrylic acid or acrylonitrile did not give positive results.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 7–9, January, 1972.     

Coupled-cluster study of isomers of H2SO2

A theoretical study has been made on six isomers of H2SO2 using coupled-cluster singles and doubles with noniterative triple excitations (CCSD(T)). The isomers studied are sulfoxylic acid (S(OH)2; C2 and Cs conformers), sulfinic acid (HS(=O)OH; 2 C1 conformers), dihydrogen sulfone (H2SO2; C2v), sulfhydryl hydroperoxide (HSOOH; C1), thiadioxirane (Cs), and dihydrogen persulfoxide (H2SOO; Cs). Molecular geometries, harmonic vibrational frequencies, and infrared intensities of all species were obtained using the CCSD(T) method and the 6-311++G(2d,2p) basis set. All aforementioned species were found to be local minima, with the exception of thiadioxirane, which has one imaginary frequency. A prior possible infrared observation of sulfinic acid was reassessed on the basis of the present data. In agreement with previous MP2 results, the present CCSD(T) data provide support for at most 4 of the 8 observed frequencies. The CCSD(T) frequencies and intensities should be of assistance in future identification of H2SO2 isomers by vibrational spectroscopy. Relative energies were calculated using the CCSD(T) method and several larger basis sets. As found previously, the lowest energy species is C2 S(OH)2, followed by Cs S(OH)2, HS(=O)OH, H2SO2, HSOOH, thiadioxirane, and H2SOO. Expanding the basis set significantly reduces the relative energies of HS(=O)OH and H2SO2. The CCSD(T) method was used with extended basis sets (up to aug-cc-pV(Q+d)Z) and basis set extrapolation in two reaction schemes to calculate the DeltaH degrees t (25 degrees C) of C2 S(OH)2. The two reaction schemes gave -285.8 and -282.7 kJ mol-1, which are quite close to a prior theoretical estimate (-290 kJ mol-1).     

Simultaneous stopped-flow determination of 1- and 2-naphthol

A kinetic method for the simultaneous determination of 1- and 2-naphthol based on their different rate of coupling with diazotized sulphanilic acid in a weakly acid medium is reported. The reaction is performed by a stopped-flow technique and monitored spectrophotometrically at 475 nm. On the basis of this reaction, mixtures of these naphthols can be determined by measuring the reaction rates at two reaction times which gave maximum discrimination between the two naphthols. Theoretical equations are used in order to evaluate the accuracy of the proposed method. Mixtures of these naphthols at the mug/ml level and in 2-naphthol/ 1 -naphthol ratios from 20:1 to 1:5 can be determined with a relative standard deviation of 1.5%. Ternary mixtures of carbaryl, 1-naphthol and 2-naphthol can also be resolved.     

Rapid and Efficient Synthesis of 3,3-Di(1H-indol-3-yl)indolin-2-ones and 2,2-Di(1H-indol-3-yl)-2H-acenaphthen-1-ones Catalyzed by p-TSA

An efficient synthesis of 3,3-di(1H-indol-3-yl)indolin-2-ones and 2,2-di(1H-indol-3-yl)-2H-acenaphthen-1-ones via a reaction of various isatins or acenaphthenequinone with indoles in the presence of p-methylbenzene sulfonic acid (p-TSA) in CH₂Cl₂ at room temperature is described. The advantages of this method include good reaction yield, simple workup procedure, and mild reaction condition.     

Synthesis of 1-Acetamido-2-acetyladamantane

The triple bond of 2-ethynyl-2-adamantanol virtually did not hydrolyze under Kucherov reaction conditions in aqueous ethanol and methanol. In aqueous acetic acid arose a mixture of 2-acetyl-2-adamantanol and its acetate. In good yield the 2-acetyl-2-adamantanol was obtained by Kucherov reaction in aqueous THF. This alcohol with acetonitrile under conditions of Ritter's reaction (catalysis with sulfuric acid) afforded a mixture of 1-acetamido-2-acetyl-, 1-acetamido-4-cis- and 1-acetamido-4-trans-acetyladamantanes in 8:1:1 ratio.     

Efficient synthesis of 2-aminoindane-2-carboxylic acid via dialkylation of nucleophilic glycine equivalent

An efficient, easy to scale-up method for preparing 2-aminoindane-2-carboxylic acid via two-step alkylation of a Ni(II)-complex of glycine Schiff base with 2-[N-(alpha-picolyl)amino]benzophenone (PAAP) (2b) with o-dibromoxylylene (3) is reported. The first step, monoalkylation of 2b with 3, conducted under phase-transfer conditions, gave the corresponding complex 6 in excellent chemical yield (97.2%). Without any purification the intermediate 6 was cyclized under homogeneous conditions (DMF, NaO-t-Bu) to give the product 7 in high chemical yield (93.1%). Decomposition of prepared 7 afforded the target amino acid 2-aminoindane-2-carboxylic acid (1) in 97.9% yield, along with recovery of ligand 8, which was converted back to the starting glycine complex 2b. Operationally convenient experimental procedures, mild reaction conditions, as well as high chemical and volume yields render the method practical for preparing amino acid 1 and its analogues.     

Absolute configuration of 2-methoxy-2-(2-naphthyl)propionic acid as determined by the 1H NMR anisotropy method

2-Methoxy-2-(2-naphthyl)propionic acid 1 and 2-hydroxy-2-(2-naphthyl)propionic acid 2 were prepared by the Grignard reaction of 2-naphthylmagnesium bromide with (1R,2S,5R)-(−)-menthyl pyruvate. The absolute configurations of (+)-1 and (+)-2 were determined to be S by the ¹H NMR anisotropy method.     

Asymmetric synthesis of 2-aminonorbornane-2-carboxylic acids by Diels-Alder reaction

The reaction between methyl N-acetyl-,β-didehydroalaninate and cyclopentadiene in the presence of several chiral Lewis acids is studied and the results obtained are compared with those described for the reactions of the same diene with chiral N-acetyl-,β-didehydroalaninates. In the presence of the titanium complex 24d methyl (1R,2R,4R) 2-acetamido-5-norbornen-2-carboxylate is preferably obtained. Thus, the reaction between methyl N-acetyl-(,β-didehydroalaninate and cyclopentadiene is a good method for the synthesis of (1S, 2R, 4R) 2-aminonorbomane-2-carboxylic acid.     

A computational study of the heats of reaction of substituted monoethanolamine with CO2

Various amines have been considered as materials for chemical capture of CO(2) through liquid-phase reactions to form either carbamate or carbamic acid products. One of the main challenges in these CO(2)-amine reactions lies in tuning the heat of reaction to achieve the correct balance between the extent of reaction and the energy cost for regeneration. In this work, we use a computational approach to study the effect of substitution on the heats of reaction of monoethanolamine (MEA). We use ab initio methods at the MP2/aug-cc-pVDZ level, coupled with geometries generated from B3LYP/6-311++G(d,p) density functional theory along with the conductor-like polarizable continuum model to compute the heats of reaction. We consider two possible reaction products: carbamate, having a 2:1 amine:CO(2) reaction stoichiometry, and carbamic acid, having a 1:1 stoichiometry. We have considered CH(3), NH(2), OH, OCH(3), and F substitution groups at both the α- and β-carbon positions of MEA. We have experimentally measured heats of reaction for MEA and both α- and β-CH(3)-substituted MEA to test the predictions of our model. We find quantitative agreement between the predictions and experiments. We have also computed the relative basicities of the substituted amines and found that the heats of reaction for both carbamate and carbamic acid products are linearly correlated with the computed relative basicities. Weaker basicities result in less exothermic heats of reaction. Heats of reaction for carbamates are much more sensitive to changes in basicity than those for carbamic acids. This leads to a crossover in the heat of reaction so that carbamic acid formation becomes thermodynamically favored over carbamate formation for the weakest basicities. This provides a method for tuning the reaction stoichiometry from 2:1 to 1:1.     

Rapid spectrophotometric determination of palladium in titanium alloys with 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol

A rapid spectrophotometric method for the determination of Pd in titanium alloys is proposed. It is based on the reaction of 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol with Pd(II) in a sulphuric acid medium in the presence of ethanol. Beer's law is obeyed up to 40 mug of Pd. The molar absorptivity is 4.5 x 10(4) 1.mole(-1).cm(-1). The standard deviation is 0.3 mug of Pd and the coefficient of variation varies from 0.8 to 3.3%. The elements ordinarily present in such alloys do not interfere. High selectivity is achieved by using fluoroboric acid as masking agent. Improvements in the method of sample decomposition also contribute to the rapidity of the method.     

2-乙酰噻吩及其新型席夫碱的合成

以磷钨酸为催化剂,噻吩和乙酸酐反应合成了2-乙酰噻吩(1,收率83.5%);1与不同结构的酰肼反应合成了四种新型席夫碱(2a～2d),收率90%～95%,其结构经UV,~1H NMR,~(13)C NMR,IR及元素分析表征.优化了合成1和2的反应条件.     

4-羟基-3-(2-亚氨基乙基)-2H-苯并吡喃-2-酮类化合物的超声辐射合成

以乙醇为溶剂,4-羟基-3-乙酰基香豆素和胺为原料,对甲苯磺酸为催化剂,在超声波作用下合成一系列4-羟基-3-(2-亚氨基乙基)-2H-苯并吡喃-2-酮类化合物,产率62%~94%。 对产物进行了IR、1H NMR及HRMS表征,对化合物3c进行了X射线衍射分析。 该方法具有反应产率高、时间短、反应条件温和及操作简单等优点。