固载化聚乙二醇的催化作用

本文报道了聚苯乙烯固载聚乙二醇三相催化剂在卡宾的生成、酯化、假性紫罗兰酮、二茂铁、芳氧乙酸、对硝基茴香醇的合成和C、N-烃基化等反应中的应用，并对其催化机理进行了探讨．     

聚苯乙烯树脂固载聚乙二醇及吡啶翁盐的合成及其活性评价

以氯甲基化聚苯乙烯为原料，先后接枝聚乙二醇及吡啶，合成了双中心固载相转移催化剂－交联聚苯乙烯固载聚乙二醇400及吡啶翁盐，并对氯甲基化聚苯乙烯树脂、聚苯乙烯固载聚乙二醇树脂、聚苯乙烯固载吡啶翁盐树脂及双中心树脂进行了红外光谱测试和分析。通过醋酸钾与溴苄的反应，对各催化剂进行了活性评价。发现固载双中心相转移催化剂的活性明显高于各单向中心固载相转移催化剂。     

聚苯乙烯固载化聚乙二醇苄醚的合成、相转移催化及机理研究

改进了聚苯乙烯固载化聚乙二醇苄醚的合成方法,并在正溴辛烷与固体NaI的亲核取代反应中考察了它们的相转移催化性能。结果表明,催化反应对n-C₈H₁₇Br浓度为表观1级。催化剂交联度越低,粒度越小,反应速率越大。大孔催化剂活性比凝胶催化剂高;聚乙二醇固载化后的活性比固载化前高,体系中水含量对反应速率也有影响。     

固载化聚乙二醇三相催化下香豆素的合成

研究了固载化聚乙二醇三相催化下香豆素的合成，探讨了影响反应的主要因素。结果表明，该反应的最佳反应条件为：水杨醛与碳酸钾的摩尔比为１：０．７５，反应温度为１７５℃，反应时间为３．５ｈ，该条件下香豆素的收率为６５．７％。     

聚苯乙烯固载聚乙二醇的合成及表征

聚乙二醇在钠或浓氢氧化钠作用下接枝到氯甲基化聚苯乙烯树脂上，制成聚苯乙烯固载聚乙二醇树脂，讨论了影响接枝反应的条件．接枝反应的结果进行了电镜照片和红外光谱分析．     

矣苯乙烯固载化聚乙二醇苄醚的合成、相转移催化及机理研究

改进了聚苯乙烯固栽化聚乙二醇苄醚的合成方法，并在正溴辛烷与固体NaI的亲核取代反应中考察了它们的相转移催化性能。结果表明，催化反应对n-C18H17Br浓度为表观1级，催化剂交联度越低，粒度越小，反应速率越小，大孔催化剂活性比凝胶催化剂高；聚乙二醇固载化后的活性比固栽化前高；体系中水含量对反应速率也有影响。     

聚苯乙烯树脂固载聚乙二醇及吡啶weng盐的合成及其活性评价

以氯甲基化聚苯乙烯为原料，先后接枝聚乙二醇及吡啶，合成了双中心固载相转移催化剂──交联聚苯乙烯固载聚乙二醇４００及吡啶weng盐，并对氯甲基化聚苯乙烯树脂、聚苯乙烯固载聚乙二醇树脂、聚苯乙烯固载吡啶weng盐树脂及双中心树脂进行了红外光谱测试和分析，通过醋酸钾与溴节的反应，对各催化剂进行了活性评价，发现固载双中心相转移催化剂的活性明显高于各单中心固载相转移催化剂。     

固载化聚乙二醇三相催化下香豆素的合成

研究了固载化聚乙二醇三相催化下香豆素的合成，探讨了影响反应的主要因素。结果表明，该反应的最佳反应条件为：水杨醛与碳酸钾的摩尔比为 １： ０．７５，反应温度为１７５℃，反应时间为３．５ ｈ，该条件下香豆素的收率为 ６５．７％。     

0聚合物固载的聚乙二醇季铵盐型相转移催化剂的合成,表征及相…

合成了一系列含有聚乙二聚链和季铵盐两种性中心的离分子相转移催化剂，并考察了它闪在正溴辛烷与固体碘化钠的亲核了以代反应中的相转移催化性能。     

A convenient synthesis of dihydrocoumarins from phenols and cinnamic acid derivatives

A facile procedure for synthesis of dihydrocoumarin derivatives was described. Although the yield of the products in the reaction of phenols with acrylates in trifluoroacetic acid in the presence of Pd(OAc)₂ giving coumarins was found to be very low, dihydrocoumarin derivatives were obtained in good to high yields in the absence of Pd(OAc)₂ when ethyl cinnamates bearing electron-donating groups were employed in this reaction.     

Microwave-Assisted Synthesis of Quinoxalines in PEG-400

A rapid and efficient procedure for the synthesis of quinoxaline derivatives has been achieved by condensation of aryl-1,2-diamines with 1,2-dicarbonyl compounds catalyzed by polyethylene glycol under CEM-focused microwave-irradiation conditions.     

Solvent-free synthesis of 4-aryl-3,4-dihydrobenzopyran-2-ones via [3+3] cyclocoupling of phenols with cinnamic acid catalyzed by molecular iodine

Molecular iodine was used as a catalyst in the [3+3] cyclocoupling of phenols and cinnamic acids which proceeds via a tandem esterification-hydroarylation process at 120-130 °C under solvent-free conditions. Substituted 4-aryl-3,4-dihydrobenzopyran-2-ones were obtained in good yields.     

桂皮酸糖酯类衍生物的合成

桂皮酸作为常用的食用香料、新鲜水果和蔬菜等的防腐剂,是一种来源广泛,对人体安全的物质,被美国列为GPAS范围.有报道把它称为一种调节植物分化和生长的激素,还具有抗微生物、抗炎、抗血小板凝聚的作用[1].此外,一系列研究表明桂皮酸及其衍生物对黑色素瘤细胞、结肠癌细胞、流感病毒等多种肿瘤细胞和病毒具有抑制作用[2-6].但由于桂皮酸分子中含有羧基,对胃肠道有较强的刺激作用,因此,对桂皮酸的结构修饰已有研究报道[7].     

BTISA-catalyzed Friedel-Crafts bimolecular cyclization of cinnamic acid under superelectrophilic solvation conditions

Friedel-Crafts bimolecular cyclizations of cinnamic acid and cinnamoyl chloride with aromatic compounds in strong and superstrong acids in present of 1 mol% BTISA were investigated. It was demonstrated that catalytic amounts of this new superacid have essential effect on such type of reactions. Its use makes possible the preparation of indanones with quantitative yields.     

pH- and cinnamic acid-triggerable dioleoylphophatidylethanolamine liposome bearing polyethyleneimine/palmitic acid mixture

pH and cinnamic acid (CA)-triggerable liposome was prepared by stabilizing dioleoylphosphatidylethanolamine (DOPE) bilayer with polyethyleneimine (PEI)/palmitic acid (PA) mixture. PEI/PA mixture was air/water interface-active, possibly due to the formation of PEI/PA salt conjugate. When the weight ratio of DOPE to PEI/PA mixture was 200:1, 100:1, 50:1, and 20:1, the fluorescence quenching degree of calcein loaded in the DOPE/PEI/PA assembly prepared using PBS (10 mM, pH 7.4) was 70.7%, 68.7%, 35.3%, and 14%, respectively, indicating that DOPE could be assembled into liposome at the physiological pH value with the aid of the PEI/PA mixture. The hydrodynamic mean diameter of liposome increased from 289 nm to 702 nm on increasing the weight ratio of the DOPE to PEI/PA mixture, possibly because of the bulky PEI chains. The release degree in 120 seconds at pH 4.5, pH 6.0, pH 7.4, and pH 9.0 was about 85%, 24.1%, 10.1%, and 62.0%, respectively, when the suspension of liposome of which the DOPE to PEI/PA mixture weight ratio was 50:1 (pH 7.4) was injected into the release medium of different pH values. The triggered release upon the acidification (i.e., pH 7.4–4.5) and the alkalization (i.e., pH 7.4–9.0) was possibly because PA and PEI were deionized under acidic and alkali conditions, respectively; thus the salt bridge of PEI/PA conjugate could break down. The DOPE liposome also exhibited CA-triggered release. The release degree in 120 seconds at 25°C was 23.1% and it was higher than the release degree at 50°C, 10.9%, possibly because CA could render PEI chains condensed and assembled under upper the critical solution temperature.     

Effect of surfactants on temperature-dependent self-assembling property of copolyethylenimine/cinnamic acid aqueous mixture

The transmittance of polyethylenimine (PEI)/cinnamic acid (CA) aqueous mixture was close to zero at 20–40°C, and it began to increase around 40°C due to the disassembling of the self-assembly of the PEI/CA conjugate. As the concentration of sodium dodecyl sulfate (SDS) increased, the increasing rate of the transmittance decreased and the onset temperature increased, indicating that the self-assembly of the PEI/CA conjugate became more stable against heat with the aid of SDS. Tween 20 could also suppress the thermally induced disassembling of the self-assembly, possibly because poly(ethylene oxide) chains of the surfactant could be entangled with the PEI chains. Dodecyltrimethyl ammonium bromide (DTAB) did not have an effect on the temperature-dependent self-assembling phenomena as much as SDS and Tween 20 did. The interfacial tension of the PEI/CA/SDS aqueous mixture and that of the PEI/CA/Tween 20 aqueous mixture at 70°C were lower than the respective tensions observed at 25°C. On the contrary, the interfacial tension of the PEI/CA/DTAB aqueous mixture at 70°C was higher than that observed at 25°C, possibly because the PEI/CA conjugate could lose its surface activity at the higher temperature due to the adsorption of DTAB on CA molecules.     

Phase-transfer catalytic reaction of 2,4,6-tribromophenol and dibromomethane: effect of potassium hydroxide

The reaction of 2,4,6-tribromophenol with dibromomethane in an alkaline solution of KOH/dibromomethane two-phase medium, catalyzed by tetrabutylammonium bromide (TBAB or QBr), was carried out. Both mono-substituted as well as bi-substituted products were found to have formed during or after the reaction, when dibromomethane was used both as organic solvent as well as organic-phase reactant. The active catalyst tetrabutylammonium 2,4,6-tribromophenoxide (ArOQ) was identified during the reaction, from which the organic-phase reaction was inferred to be the rate controlling step. The mass transfer of both the catalysts viz. QBr and ArOQ between the two phases was found to be fast. A peculiar phenomenon was observed while investigating the effect of KOH on the reaction rate, viz. the reaction rate does not monotonously increase or decrease with increase in the amount of KOH. This phenomenon is attributed to the activity of ArOQ, the distribution of active catalyst (ArOQ) between the two phases and the hydration of active catalyst in the organic phase, both of which are affected by the amount of KOH. An effective method is proposed to determine the two intrinsic rate constants of the organic-phase reaction, based on the reaction carried out at high KOH concentration.