Chiral separation of synthetic vicinal diol compounds by capillary zone electrophoresis with borate buffer and beta-cyclodextrin as buffer additive.

The investigation on capillary electrophoretic enantioseparation of six synthetic compounds containing vicinal diol groups has been undertaken to acquire the optimum conditions using native beta-cyclodextrin (beta-CD) as chiral selector and borate as a background electrolyte. The separation was carried out in an uncoated capillary (58.5 cm x 75 microm i.d., effective length 48.5 cm) and the effects of several important factors were investigated in detail. The results showed that beta-CD as a chiral selector exhibited good enantioselectivity and that the enantioseparation was greatly influenced by the structure of the diols, the borate concentration and the buffer pH. The optimum performance was obtained for the chiral vicinal diols under the conditions of 200 mM borate buffer of pH 9.8 containing 1.7% beta-CD at an applied voltage of 15 kV and a capillary temperature of 20 degrees C. Under the conditions, four diols were baseline separated with fast analysis time and the good theoretical plate numbers (above 10 x 10(4)) and favorable migration-time reproducibilities (RSDs below 3.0%) were obtained. The separation results were satisfactory.     

托吡卡胺对映体的毛细管电泳-方波安培分离检测

采用毛细管电泳-方波安培检测法,在熔融石英毛细管(75 μm i.d.×50 cm)中,以7 mmol/L 三羟甲基氨基甲烷(Tris)-10 mmol/L柠檬酸-2 mmol/L硼酸-15mmol/L β-环糊精 （β-CD） (pH 3.0)为电泳介质,采用重力进样,高度差为20 cm,进样时间为10 s,在分离电压为15 kV,方波平衡电位+0.8 V的条件下,实现了托吡卡胺对映体的分离检测。线性范围为5~750 μmol/L,检出限为2 μmol/L。对影响分离度的因素β-CD浓度、硼酸浓度及p     

Comparison of sulfobutylether- and sulfated-beta-cyclodextrins as additives for the chiral separation of basic spirobenzopyrans by capillary electrophoresis.

Three charged substituted beta-cyclodextrins (beta-CDs), sulfobutylether-beta-(SBE-beta-CD), degree of substitution (DS) 4 and 7), and sulfated-beta-(S-beta-CD) cyclodextrins, were compared as chiral additives in capillary electrophoresis for the enantiomeric separation of basic spirobenzopyran derivatives (pKa 9.9) which differ from each other by an N-alkyl group. The number of sulfobutylether groups attached to the cyclodextrin moiety significantly influences the enantioseparation of the basic drugs. SBE-beta-CD (DS 7) which is more strongly bound to cationic analyte than SBE-beta-CD (DS 4.6), requires smaller concentrations to achieve the same resolution. Besides, better enantioresolutions were obtained with S-beta-CD rather than with SBE-beta-CDs though higher concentrations are required, which led to high current values. However, both pairs of enantiomers cannot be resolved using S-beta-CD while SBE-beta-CDs make it possible to resolve simultaneous enantioseparation of such solutes slightly differing in hydrophobicity. This supports the hypothesis that hydrophobic interactions (outside of the CD cavity) between the butyl group attached to SBE-beta-CD and the N-alkyl group of spirobenzopyran play a role in the enantioseparation. On the other hand, the sulfate group of S-beta-CD was directly attached to the CD moiety which means that the S-beta-CD-drug complexation mechanism arises through the combination of electrostatic and hydrophobic (inside the CD cavity) interactions. Finally, enantiomers of spirobenzopyran drugs were satisfactorily resolved by CE using a 20 mg/mL S-beta-CD concentration (resolution 4.0), 7 mg/mL SBE-beta-CD DS 4 (resolution 1.3), or 5 mg/mL SBE-beta-CD DS 7 (resolution 3.3) added to the phosphate buffer (pH 2.6, 50 mM ionic strength).     

Enantioseparation of atropine by capillary electrophoresis using sulfated beta-cyclodextrin: application to a plant extract

A capillary zone electrophoresis (CZE) method, with sulfated beta-CD as chiral selector, was optimized by means of an experimental design for the enantioseparation of atropine. In this study, a central composite design was used and the following factors were varied simultaneously: buffer concentration, buffer pH and sulfated beta-CD concentration. The resolutions between littorine and its positional isomer ((-)-hyoscyamine) and between atropine enantiomers, as well as the separation time and generated current were established as responses. A model was obtained for each response by linear multiple regression of a second-degree mathematical expression. The most favorable conditions were determined by maximizing the resolution between atropine enantiomers and by setting the other responses at threshold values. Successful results were obtained with a 55 mM phosphate buffer at pH 7 in the presence of 2.9 mM sulfated-beta-CD at 20 degrees C and 20 kV. Under these optimized conditions, a baseline separation of littorine and atropine enantiomers was achieved in less than 5 min. Finally, the method allowed the enantiomeric separation of atropine in a pharmaceutical formulation and was also found to be suitable for the enantiomeric purity evaluation of (-)-hyoscyamine in plant extracts, in relation with the extraction procedure. It was demonstrated that supercritical fluid extraction induced less racemization than classical liquid-solid extraction procedures.     

Experimental design for enantioselective separation of celiprolol by capillary electrophoresis using sulfated beta-cyclodextrin

A capillary zone electrophoresis method was developed for the enantioseparation of celiprolol enantiomers, using a sulfated beta-cyclodextrin (beta-CD) as a chiral selector. The use of a coated capillary was necessary to achieve stable and reproducible enantioseparations. A central composite design was applied to optimize the method and four parameters were selected for this study: the buffer pH, the buffer concentration, the sulfated beta-CD concentration and the temperature. Resolution between celiprolol enantiomers as well as analysis time and generated current were established as responses. For each response, a model was obtained by a second-degree mathematical expression. From the models, the most favorable conditions were determined by optimizing the resolution between celiprolol enantiomers and by setting the two other responses at threshold values. Response surfaces were also used to assess the robustness of the analytical method around the optimal region. Successful results were obtained with a 52 mM acetate buffer at pH 4.0 in the presence of 3.0 mM sulfated beta-CD at a temperature of 19.5 degrees C. Under these optimized conditions, baseline separation of the celiprolol enantiomers was achieved in less than 10 min. The method showed good validation data in terms of precision, accuracy and linearity, and was found to be suitable in determining celiprolol enantiomers in pharmaceutical preparations and in biological fluids.     

A family of single-isomer positively charged cyclodextrins as chiral selectors for capillary electrophoresis: mono-6A-butylammonium-6A-deoxy-beta-cyclodextrin tosylate

A novel single-isomer positively charged beta-cyclodextrin (beta-CD), mono-6(A)-butylammonium-6(A)-deoxy-beta-cyclodextrin tosylate (BuAM-beta-CD), has been synthesized, characterized, and used for the enantioseparations of alpha-hydroxy acids, carboxylic acids, and ampholytic analytes by capillary electrophoresis in acidic aqueous background electrolytes. The effective mobilities of all studied analytes decreased with increasing concentration of CD. Satisfactory resolutions were obtained for alpha-hydroxy acids over a wide range of chiral selector concentration. The optimum CD concentration was lower than 5 mM for the carboxylic acids, while higher than 20 mM for alpha-hydroxy acids. Inclusion complexation in combination with ion pair interaction seemed to account for the chiral discrimination process. The hydrogen bonding may provide secondary contribution for the chiral resolution of alpha-hydroxy acids. In addition, BuAM-beta-CD was further proved to be an effective chiral selector for anionic analytes by the baseline enantioseparation of a six-acid mixture within 20 min.     

Investigation of enantiomeric separation of basic drugs by capillary electrophoresis using clindamycin phosphate as a novel chiral selector

A wide number of chiral selectors have been employed in CE and among them macrocyclic antibiotics exhibited excellent enantioselective properties toward plenteous racemic drugs. Different from macrocyclic antibiotics, the use of lincomycin antibiotics as chiral selectors has not been reported previously. In this study clindamycin phosphate belonging to the group of lincomycin antibiotics is first used as a novel chiral selector for the enantiomeric separations of several racemic basic drugs, which possess high separability, consisting of nefopam, citalopram, tryptophan, chlorphenamine and propranolol. Other basic drugs giving partial enantioseparation include tryptophan methyl ester, metoprolol and atenolol. Clindamycin phosphate possesses advantages such as high solubility and low viscosity in the water and very weak UV absorption. In the course of this work we observed that both migration time and enantioseparation were influenced by several parameters such as pH of the BGE, clindamycin concentration, capillary temperature, applied voltage and organic modifier. The optimum pH that was in the neutral or weak basic region but varied among drugs, a low capillary temperature and a clindamycin concentration of 60 or 80 mM are recommended as the optimum conditions for chiral separation of these drugs. Moreover, comparison of the influences of the studied parameters was further investigated by means of Statistical Product and Service Solutions in this paper.     

Simultaneous enantioseparation and sensitivity enhancement of basic drugs using large-volume sample stacking

Simultaneous enantioseparation with sensitive detection of four basic drugs, namely methoxamine, metaproterenol, terbutaline and carvedilol, using a 20-mum ID capillary with native beta-CD as the chiral selector was demonstrated by the large-volume sample stacking method. The procedure included conventional sample loading either hydrodynamically or electrokinetically at longer injection times without polarity switching and EOF manipulation. In comparison to conventional injections, depending on the analyte, about several hundred- and a thousand-fold sensitivity enhancement was achieved with the hydrodynamic and the electrokinetic injections, respectively. The simple method developed was applied to the analysis of racemic analytes in serum samples and better recovery was achieved using hydrodynamic injection than electrokinetic injection.     

Enantiomeric separation of synthetic 2,3-dihydroxy-3-phenylpropionate compounds by beta-cyclodextrin-modified capillary electrophoresis

A new capillary electrophoretic method was developed for enantiomeric separation and optical impurity analysis of three synthetic 2,3-dihydroxy-3-phenylpropionate compounds using native beta-cyclodextrin (beta-CD) as chiral selector and borate as a background electrolyte. The separation was carried out in uncoated capillary (58.5 cm x 75 microm I.D., effective length 48.5 cm). The results showed that beta-CD as the chiral selector exhibited good enantioselectivity and the baseline separation was obtained at pH 9.8, 200 mM borate buffer containing 1.7% beta-CD at applied voltage 15 kV and capillary temperature 20 degrees C within 15 min. The precision of each tested compound was less than 1.0% at migration time and 5.0% in corrected peak area and the accuracy of the method was in the range of 98.7-105%. Furthermore, the developed method was successfully applied to the determination of the undesirable trace (2S,3R)-(+)-form impurity in the synthetic (2R,3S)-(-)-2,3-dihydroxy-3-phenylpropionate samples.     

Enantiomeric separation of citalopram and its metabolites by capillary electrophoresis

A simple and fast capillary electrophoretic method has been developed for the enantioselective separation of citalopram and its main metabolites, namely N-desmethylcitalopram and N,N-didesmethylcitalopram, using beta-cyclodextrin (beta-CD) sulfate as the chiral selector. For method optimisation several parameters were investigated, such as CD and buffer concentration, buffer pH, and capillary temperature. Baseline enantioseparation of the racemic compounds was achieved in less than 6 min using a fused-silica capillary, filled with a background electrolyte consisting of a 35 mM phosphate buffer at pH 2.5 supplemented with 1% w/v beta-CD sulfate and 0.05% w/v beta-CD at 25 degrees C and applying a voltage of -20 kV. A fast separation method for citalopram was also optimized and applied to the analysis of pharmaceutical formulations. Racemic citalopram was resolved in its enantiomers in less than 1.5 min using short-end injection (8.5 cm, effective length) running the experiments in a background electrolyte composed of a 25 mM citrate buffer at pH 5.5 and 0.04% w/v beta-CD sulfate at a temperature of 10 degrees C.     

Temperature effects on the enantioselectivity of basic analytes in capillary EKC using sulfated beta-CDs as chiral selectors

The thermodynamic processes were investigated to reveal the temperature effects during chiral separation by capillary EKC with reversed polarity mode using sulfated beta-CD (S-beta-CD) as chiral selectors. The temperature effects on enantioselectivities of basic analytes (ephedrine, norephedrine, synephrine, and epinephrine) were investigated in detail over a temperature range of 20-60 degrees C. An increase of the capillary temperature produced the decrease of enantioselectivities for ephedrine and norephedrine, but increase of enantioselectivities for synephrine and epinephrine. The thermodynamic variations showed that the interactions between the basic analytes and chiral selectors were always enthalpy- driven. However, the difference in enthalpy and entropy showed that the enantioseparation was an enthalpy-driven process for ephedrine and norephedrine, but an entropydriven process for synephrine and epinephrine. Just because of the different driving forces, there exist two kinds of temperature effects on enantioselectivities mentioned above.     

Capillary electrophoretic enantioseparation of basic drugs using a new single‐isomer cyclodextrin derivative and theoretical study of the chiral recognition mechanism

A novel single‐isomer cyclodextrin derivative, heptakis {2,6‐di‐O‐[3‐(1,3‐dicarboxyl propylamino)‐2‐hydroxypropyl]}‐β‐cyclodextrin (glutamic acid‐β‐cyclodextrin) was synthesized and used as a chiral selector in capillary electrophoresis for the enantioseparation of 12 basic drugs, including terbutaline, clorprenaline, tulobuterol, clenbuterol, procaterol, carvedilol, econazole, miconazole, homatropine methyl bromide, brompheniramine, chlorpheniramine and pheniramine. The primary factors affecting separation efficiency, which include the background electrolyte pH, the concentration of glutamic acid‐β‐cyclodextrin and phosphate buffer concentration, were investigated. Satisfactory enantioseparations were obtained using an uncoated fused‐silica capillary of 50 cm (effective length 40 cm) × 50 μm id with 120 mM phosphate buffer (pH 2.5–4.0) containing 0.5–4.5 mM glutamic acid‐β‐cyclodextrin as background electrolyte. A voltage of 20 kV was applied and the capillary temperature was kept at 20°C. The results proved that glutamic acid‐β‐cyclodextrin was an effective chiral selector for studied 12 basic drugs. Moreover, the possible chiral recognition mechanism of brompheniramine, chlorpheniramine and pheniramine on glutamic acid‐β‐cyclodextrin was investigated using the semi‐empirical Parametric Method 3.     

Enantioseparation of phenothiazines in cyclodextrin-modified micellar electrokinetic chromatography

In this study, enantioseparations of five phenothiazines in cyclodextrin (CD)-modified micellar electrokinetic chromatography (MEKC) were investigated using a citrate buffer containing tetradecyltrimethylammonium bromide (TTAB) as a cationic surfactant at low pH. Beta-cyclodextrin (beta-CD) and hydroxylpropyl-beta-CD (HP-beta-CD) were selected as chiral selectors. The results indicate that the separation window is greatly enlarged by beta-CD concentration and that the separability and selectivity of phenothiazines are remarkably influenced by the concentrations of both beta-CD and TTAB, as well as buffer pH. The interaction of thioridazine with beta-CDs is considerably reduced in the presence of TTAB micelles due to competitive complexation of thioridazine with TTAB micelles, which is pH-dependent. As a result, effective enantioseparation of thioridazine is simultaneously achievable with that of trimeprazine and promethazine or ethopropazine in MEKC with addition of either beta-CD or HP-beta-CD, respectively, to a micellar citrate buffer containing TTAB at pH 3.5. Better enantioresolution of thioridazine in MEKC than in capillary zone electrophoresis can be obtained.     

Influence of (hydroxy)alkylamino substituents on enantioseparation ability of single-isomer amino-beta-cyclodextrin derivatives in chiral capillary electrophoresis

A family of single-isomer amino-beta-cyclodextrin (amino-beta-CD) derivatives containing an amino or (hydroxy)alkylamino group in one of the primary positions has been synthesized. The steric effect and hydrogen bond forming ability of the different substituents on enantioseparation of acidic enantiomers has been studied by capillary electrophoresis (CE). Three enantiomeric model compounds (mandelic acid, cis-permethrinic acid, and cis-deltamethrinic acid) having significantly different apparent complex stability constants with beta-CD were applied in the experiments. Dependence of separation selectivity, resolution as well as mobility difference on chiral selector concentration (0.1-20 mM, pH 6.0) was investigated. Each amino-beta-CD showed higher enantioselectivity than the native beta-CD. One hydroxyalkyl group attached to the primary amino N-atom significantly increased both the enantioselectivity and the resolution compared to the primary amino-beta-CD, while two hydroxyalkyl moieties decreased them due to the predominance of steric hindrance. The value of the apparent complex stability constants obtained suited well the mobility difference model (by Wren). On the other hand, the optimum selector concentrations calculated according to the model were slightly lower than the experienced concentrations giving the maximum enantioresolution of enantiomers.     

Study on enantiomeric separation of basic drugs by NACE in methanol‐based medium using erythromycin lactobionate as a chiral selector

A wide variety of chiral selectors have been employed in CZE, and among them macrocyclic antibiotics including glycopeptides, ansamycins, aminoglycosides and polypeptides exhibited prominent enantioselective properties toward abundant racemic compounds. Compared with CZE, the use of macrocyclic antibiotics as chiral selectors in NACE has not been reported previously. In this study, an approach to the enantioseparation of basic drugs by means of NACE with erythromycin lactobionate (EL) belonging to the group of macrolide antibiotics has been investigated. Especially different from the above four classes of antibiotics, there are no reports concerned with the use of macrolides which belong to macrocyclic antibiotics as chiral selectors in CE. In this work EL is first used as a chiral selector in NACE for the enantiomeric separations of two racemic basic drugs that possess high separability consisting of propranolol and duloxetine. Furthermore, EL possesses advantages such as high solubility and low viscosity in the solvent and very weak UV absorption. The chiral separations were achieved using Tris‐boric acid as the BGE and methanol as the organic medium. In the course of this work we observed that both migration time and enantioseparation were influenced by several parameters such as the pH and composition of the BGE, EL concentration, capillary temperature and applied voltage. Consequently, these parameters were systematically optimized in order to obtain the optimum enantioseparations.     

Enantioseparations of hydrobenzoin and structurally related compounds in capillary zone electrophoresis using heptakis(2,3-dihydroxy-6-O-sulfo)-beta-cyclodextrin as chiral selector and enantiomer migration reversal of hydrobenzoin with a dual cyclodextrin system in the presence of borate complexation

We investigated the enantioseparations of racemic hydrobenzoin, together with benzoin and benzoin methyl ether, in capillary electrophoresis (CE) using the single-isomer heptakis(2,3-dihydroxy-6-O-sulfo)-beta-cyclodextrin (SI-S-beta-CD) as a chiral selector in the presence and absence of borate complexation and enantiomer migration reversal of hydrobenzoin with a dual CD system consisting of SI-S-beta-CD and beta-CD in the presence of borate complexation at pH 9.0 in a borate buffer. The enantioselectivity of hydrobenzoin increased remarkably with increasing SI-S-beta-CD concentration and the enantioseparation depended on CD complexation between hydrobenzoin-borate and SI-S-beta-CD. The (S,S)-enantiomer of hydrobenzoin-borate complexes interacted more strongly than the (R,R)-enantiomer with SI-S-beta-CD. The enantiomers of hydrobenzoin could be baseline-resolved in the presence of SI-S-beta-CD at a concentration as low as 0.1% w/v, whereas the three test analytes were simultaneously enantioseparated with addition of 0.3% w/v SI-S-beta-CD or at concentrations >2.0% w/v in a borate buffer and 0.5% w/v in a phosphate background electrolyte at pH 9.0. Compared with the results obtained previously using randomly sulfated beta-CD (MI-S-beta-CD) in a borate buffer, enantioseparation of these three benzoin compounds is more advantageously aided by SI-S-beta-CD as the chiral selector. The enantioselectivity of hydrobenzoin depended greatly on the degree of substitution of sulfated beta-CD. Moreover, binding constants of the enantiomers of benzoin compounds to SI-S-beta-CD and those of hydrobenzoin-borate complexes to SI-S-beta-CD were evaluated for a better understanding of the role of CD complexation in the enantioseparation and chiral recognition. Enantiomer migration reversal of hydrobenzoin could be observed by varying the concentration of beta-CD, while keeping SI-S-beta-CD at a relatively low concentration. SI-S-beta-CD and beta-CD showed the same chiral recognition pattern but they exhibited opposite effects on the mobility of the enantiomers.     

用羧甲基聚合环糊精作手性剂的毛细管电泳法分离3种碱性药物

 采用 5种环糊精衍生物对碱性药物硫喷妥钠、盐酸氟桂利嗪、山梗菜碱进行了毛细管区带电泳的手性拆分。结果表明 ,采用含 2 % (质量分数 ,其余相同 )聚合 β 环糊精 (P β CD)或 0 5%羧甲基聚合 β 环糊精 (CM P β CD) 30mmol/L的Tris H3PO4缓冲液可使这 3种药物达到基线分离 ;使用CM P β CD时 ,分离度高达 4～35。     

Enantioseparation of cetirizine by sulfated-beta-cyclodextrin-mediated capillary electrophoresis

A sulfated beta-cyclodextrin (sulfated beta-CD)-mediated capillary electrophoresis method is described for the enantioseparation of cetirizine using achiral cefazolin as an internal standard. The enantioseparation of the drug was performed in a borate buffer (5 mM, pH 8.7) with 1% sulfated beta-CD (w/v) as chiral selector at 10 kV. Several parameters affecting the separation were studied, including the pH and the concentration of borate buffer and chiral selector. Under optimized conditions, a baseline separation of two enantiomers was achieved in less than 7 min. Using cefazolin as an internal standard (IS), the linear range of the method for the determination of levocetirizine was over 1.0 to 50.0 microg/mL; the detection limit (signal-to-noise ratio = 3) of levocetirizine was 0.5 microg/mL. The method allowed the enantioseparation of cetirizine in bulk samples and enantiomeric purity evaluation of levocetirizine (R-enantiomer) in pharmaceutical tablets (Xyzal), and it was also found to be suitable for enantioseparation in human plasma.     

Optimization of the LC enantioseparation of chiral pharmaceuticals using cellulose tris(4‐chloro‐3‐methylphenylcarbamate) as chiral selector and polar non‐aqueous mobile phases

The resolving power of a new commercial polysaccharide‐based chiral stationary phase, Sepapak‐4, with cellulose tris(4‐chloro‐3‐methylphenylcarbamate) coated on silica microparticles as chiral selector, was evaluated toward the enantioseparation of ten basic drugs with widely different structures and hydrophobic properties, using ACN as the main component of the mobile phase. A multivariate approach (experimental design) was used to screen the factors (temperature, n‐hexane content, acidic and basic additives) likely to influence enantioresolution. Then, the optimization was performed using a face‐centered central composite design. Complete enantioseparation could be obtained for almost all tested chiral compounds, demonstrating the high chiral discrimination ability of this chiral stationary phase using polar organic mobile phases made up of ACN and containing an acidic additive (TFA or formic acid), 0.1% diethylamine and n‐hexane. These results clearly illustrate the key role of the nature of the acidic additive in the mobile phase.     

Combination of cyclodextrins and polymeric surfactants for chiral separations

A cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) method was applied to the enantioseparation of three binaphthyl derivatives using neutral CDs (i.e., beta- and gamma-CD) in combination with various chiral amino acid-based polymeric surfactants (PSs). Both the D- and L-configurations of poly(sodium N-undecanoyl alaninate), poly(sodium N-undecanoyl leucinate), and poly(sodium N-undecanoyl valinate) (poly(L-SUV)) were synthesized. The retention behavior of the three binaphthyl derivatives under optimum electrophoretic conditions using a single chiral additive (PS or CD) is discussed. In addition, the effect of CD cavity size and stereochemical configuration of polymeric surfactants on selectivity (alpha) and resolution (Rs) was investigated. The enantioseparation of (+/-)1,1'-binaphthyl-2,2'-diamine gave a reversal of enantiomeric order when using beta-CD in combination with any of the three D-configuration PS. However, better enantioseparation is obtained when using the corresponding L-configuration PS with beta-CD. A reversal of migration order (RMO) for the enantiomers of (+/-)1,1'-bi-2-naphthol was observed upon the addition of 10 mM gamma-CD to poly(L-SUV). However, no RMO of (+/-)1,1'-bi-2-naphthol was seen when either beta-CD or gamma-CD was combined with D-PS. The enantiomers of (+/-)1,1'-binaphthyl-2,2'-diyl hydrogen phosphate showed little enantioselective behavior toward the PS alone. However, combined D- or L-PS and beta-CD or gamma-CD systems gave increased Rs and alpha values. The chiral recognition of binaphthyl derivatives observed resulting from the various combinations of two chiral selectors is discussed.