Aryl calcium compounds: syntheses, structures, physical properties, and chemical behavior

Organocalcium chemistry is still in its infancy. The direct synthesis of activated calcium and (substituted) iodobenzenes allows for the large-scale and high-yield synthesis of aryl calcium iodides. The influence of the substitution patterns of the phenyl group, halogen atom, and solvent is discussed. Aryl calcium iodides show a Schlenk equilibrium that enables the isolation of diaryl calcium derivatives. Owing to the high reactivity of aryl calcium halides, low temperatures have to be maintained throughout the preparative procedures in order to avoid side reactions. A decrease of reactivity and, hence, an enhanced stability at higher temperatures can be achieved by shielding of the calcium atom by increasing the coordination number of the metal center or by substitution of the iodide anion by bulky groups.     

Synthesis and structural characterization of alkaline-earth-metal bis(amido)silane and lithium oxobis(aminolato)silane complexes

Several of alkaline-earth-metal complexes [(η(2):η(2):μ(N):μ(N)-Li)(+)](2)[{η(2)-Me(2)Si(DippN)(2)}(2)Mg](2-) (4), [η(2)(N,N)-Me(2)Si(DippN)(2)Ca·3THF] (5), [η(2)(N,N)-Me(2)Si(DippN)(2)Sr·THF] (6), and [η(2)(N,N)-Me(2)Si(DippN)(2)Ba·4THF] (7) of a bulky bis(amido)silane ligand were readily prepared by the metathesis reaction of alkali-metal bis(amido)silane [Me(2)Si(DippNLi)(2)] (Dipp = 2,6-i-Pr(2)C(6)H(3)) and alkaline-earth-metal halides MX(2) (M = Mg, X = Br; M = Ca, Sr, Ba, X = I). Alternatively, compounds 5-7 were synthesized either by transamination of M[N(SiMe(3))(2)](2)·2THF (M = Ca, Sr, Ba) and [Me(2)Si(DippNH)(2)] or by transmetalation of Sn[N(SiMe(3))(2)](2), [Me(2)Si(DippNH)(2)], and metallic calcium, strontium, and barium in situ. The metathesis reaction of dilithium bis(amido)silane [Me(2)Si(DippNLi)(2)] and magnesium bromide in the presence of oxygen afforded, however, an unusual lithium oxo polyhedral complex {[(DippN(Me(2)Si)(2))(μ-O)(Me(2)Si)](2)(μ-Br)(2)[(μ(3)-Li)·THF](4)(μ(4)-O)(4)(μ(3)-Li)(2)} (8) with a square-basket-shaped core Li(6)Br(2)O(4) bearing a bis(aminolato)silane ligand. All complexes were characterized using (1)H, (13)C, and (7)Li NMR and IR spectroscopy, in addition to X-ray crystallography.     

M?F Interactions and Heterobimetallics: Furthering the Understanding of Heterobimetallic Stabilization

Heterobimetallic complexes containing alkali, alkaline‐earth, and divalent europium metals utilizing the perfluoro‐tert‐butoxide (PFTB) ligand following the general formula, [AM(PFTB)₃(co‐ligand)_x] (A=Na, K; M=Mg, Sr, Ba, Eu; co‐ligand=THF, toluene), have been isolated. These compounds sublime at low temperatures with low residual weight indicating their potential as metal–organic chemical‐vapor deposition (MOCVD) precursors. The complexes have unique molecular architectures that are strongly influenced by M? F interactions, as was verified in the solid state by using X‐ray crystallography. The significance of these interactions were further reinforced by bond‐valence sums analysis and ¹⁹F VT‐NMR spectroscopy, in which rotational energies of 18.75 and 19.08 kcal mol^?1 were measured.     

Copper-catalyzed direct preparation of diaryl sulfides from aryl iodides using potassium thiocyanate as a sulfur transfer reagent

A method for direct preparation of diaryl sulfides from aryl iodides using potassium thiocyanate as a sulfur-transfer agent is reported. A catalyst system comprising of a simple copper salt, tetrabutylammonium bromide as a phase-transfer agent and water as the solvent is used. Microwave heating at 200 °C for 60 min allows for the conversion of a range of aryl iodides to the corresponding diaryl sulfides.     

Copper mediated coupling of 2-(piperazine)-pyrimidine iodides with aryl thiols using Cu(I)thiophene-2-carboxylate

A copper-mediated synthesis of diaryl sulfides utilizing Cu(I)-thiophene-2-carboxylate (CuTC) is described. We demonstrate the use of CuTC as a soluble, non-basic catalyst in the coupling of aryl iodides and aryl thiols in the synthesis of synthetically advanced diaryl sulfides. This method allows for the successful coupling of challenging substrates including ortho-substituted and heteroaryl iodides and thiols. Additionally, most of the aryl iodide substrates used here contain the privileged piperazine scaffold bound to a pyrimidine, pyridine, or phenyl ring and thus this method allows for the elaboration of complex piperazine scaffolds into molecules of biological interest. The method described here enables the incorporation of late-stage structural diversity into diaryl sulfides containing the piperazine ring, thus enhancing the number and nature of derivatives available for SAR investigation.     

Synthesis and molecular structures of phenylamides of magnesium, calcium, strontium, and barium--from molecular to polymeric structures

Several preparative procedures for the synthesis of the THF complexes of the alkaline earth metal bis(phenylamides) of Mg (1), Ca (2), Sr (3), and Ba (4) are presented such as metalation of aniline with strontium and barium, metathesis reactions of MI2 with KN(H)Ph, and metalation of aniline with arylcalcium compounds or dialkylmagnesium. The THF content of these compounds is rather low and an increasing aggregation is observed with the size of the metal atom. Thus, tetrameric [(THF)2Ca{mu-N(H)Ph}2]4 (2) and polymeric [(THF)2Sr{mu-N(H)Ph}2]infinity and {[(THF)2Ba{mu-N(H)Ph}2]2[(THF)Ba{mu-N(H)Ph}2]2}infinity show six-coordinate metal atoms with increasing interactions to the pi systems of the phenyl groups with increasing the radius of the alkaline earth metal atom.     

Tris-(2-aminoethyl) amine as a novel and efficient tripod ligand for a copper(I)-catalyzed C-O coupling reaction

We have introduced a novel, efficient, commercially available and economically attractive N-donor tripod ligand, tris-(2-aminoethyl)amine for copper-catalyzed Ullmann diaryl ether synthesis. This catalyst system is highly active for both aryl iodides and aryl bromides. Variously substituted diaryl ethers have been synthesized in good to excellent yields.     

N,N-dimethyl glycine-promoted Ullmann coupling reaction of phenols and aryl halides

[reaction: see text] Ullmann-type diaryl ether synthesis can be performed at 90 degrees C using either aryl iodides or aryl bromides as the substrates under the assistance of N,N-dimethylglycine.     

Ligand-free copper-catalyzed C-S coupling of aryl iodides and thiols

A protocol for the copper-catalyzed aryl-sulfur bond formation between aryl iodides and thiophenols is reported. The reaction is catalyzed by a low amount (1-2.5 mol %) of readily available and ligand-free copper iodide salt. A variety of diaryl thioethers are synthesized under relatively mild reaction conditions with good chemoselectivity and functional group tolerance.     

Magnesium-induced copper-catalyzed synthesis of unsymmetrical diaryl chalcogenide compounds from aryl iodide via cleavage of the Se-Se or S-S bond

The methodology for a copper-catalyzed preparation of diaryl chalcogenide compounds from aryl iodides and diphenyl dichalcogenide molecules is reported. Unsymmetrical diaryl sulfide or diaryl selenide can be synthesized from aryl iodide and PhYYPh (Y = S, Se) with a copper catalyst (CuI or Cu(2)O) and magnesium metal in one pot. This reaction can be carried out under neutral conditions according to an addition of magnesium metal as the reductive reagent. Furthermore, it is efficiently available for two monophenylchalcogenide groups generated from diphenyl dichalcogenide.     

Synthesis and structures of monomeric magnesium, calcium, strontium, and barium amides involving the N,N-(2,4,6-trimethylphenyl)(trimethylsilyl)amido ligand

An extended family of aryl-substituted alkaline earth metal silylamides M{N(2,4,6-Me3C6H2)(SiMe3)}donor(n) was prepared using alkane elimination (Mg), salt elimination (Ca, Sr, Ba), and direct metalation (Sr, Ba). Three different donors, THF, TMEDA (TMEDA = N,N,N',N'-tetramethylethylenediamine), and PMDTA (PMDTA = N,N,N',N',N'-pentamethyldiethylenetriamine) were employed to study their influence on the coordination chemistry of the target compounds, producing monomeric species with the composition M{N(2,4,6-Me3C6H2)(SiMe3)}2(THF)2 (M = Mg, Ca, Sr, Ba), M{N(2,4,6-Me3C6H2)(SiMe3)}2TMEDA (M = Ca, Ba), and M{N(2,4,6-Me3C6H2)(SiMe3)}2PMDTA (M = Sr, Ba). For the heavier metal analogues, varying degrees of agostic interactions are completing the coordination sphere of the metals. Compounds were characterized using IR and NMR spectroscopy in addition to X-ray crystallography.     

One-pot synthesis of symmetrical and unsymmetrical aryl sulfides by Pd-catalyzed couplings of aryl halides and thioacetates

Aryl sulfides were obtained from the coupling reaction of S-aryl (or S-alkyl) thioacetates and aryl bromides in the presence of palladium catalyst. This reaction method enables the one-pot synthesis of symmetrical and unsymmetrical diaryl sulfides by employing potassium thioacetate with aryl iodides and aryl bromides.     

A general and mild Ullmann-type synthesis of diaryl ethers

[reaction: see text] An efficient method for the synthesis of diaryl ethers under particularly mild conditions is described. Inexpensive ligands were found to greatly accelerate the Ullmann-type coupling of aryl bromides or iodides with phenols. A series of diaryl ethers were obtained with excellent yields in acetonitrile in the presence of Cs(2)CO(3) and catalytic copper(I) oxide. The reaction tolerates substrates with unfavorable substitution patterns, such as sterically hindered coupling partners or electron-rich aryl halides.     

二价铜离子和联咪唑催化的酚与碘代芳烃的乌尔曼反应研究

Ullmann-type diaryl ether synthesis can be performed at 100 ℃ in good to excellent yields by aryl iodides as the substrates under the assistance of copper（Ⅱ） and 2,2＇-biimidazolyl.     

Heavy alkaline earth metal pyrazolates: synthetic pathways, structural trends, and comparison with divalent lanthanoids

Two series of heavy alkaline earth metal pyrazolates, [M(Ph(2)pz)(2)(thf)(4)] 1 a-c (Ph(2)pz=3,5-diphenylpyrazolate, M=Ca, Sr, Ba; THF=tetrahydrofuran) and [M(Ph(2)pz)(2)(dme)(n)] (M=Ca, 2 a, Sr, 2 b, n=2; M=Ba, 2 c, n=3; DME=1,2-dimethoxyethane) have been prepared by redox transmetallation/ligand exchange utilizing Hg(C(6)F(5))(2). Compounds 1 a and 2 b were also obtained by redox transmetallation with Tl(Ph(2)pz). Alternatively, direct reaction of the alkaline earth metals with 3,5-diphenylpyrazole at elevated temperatures under solventless conditions yielded compounds 1 a-c and 2 a-c upon extraction with THF or DME. By contrast, [M(Me(2)pz)(2)(Me(2)pzH)(4)] 3 a-c (M=Ca, Sr, Ba; Me(2)pzH=3,5-dimethylpyrazole) were prepared by protolysis of [M[N(SiMe(3))(2)](2)(thf)(2)] (M=Ca, Sr, Ba) with Me(2)pzH in THF and by direct metallation with Me(2)pzH in liquid NH(3)/THF. Compounds 1 a-c and 2 a-c display eta(2)-bonded pyrazolate ligands, while 3 a,b exhibit eta(1)-coordination. Complexes 1 a-c have transoid Ph(2)pz ligands and an overall coordination number of eight with a switch from mutually coplanar Ph(2)pz ligands in 1 a,b to perpendicular in 1 c. In eight coordinate 2 a,b the pyrazolate ligands are cisoid, whilst 2 c has an additional DME ligand and a metal coordination number of ten. By contrast, 3 a,b have octahedral geometry with four eta(1)-Me(2)pzH donors, which are hydrogen-bonded to the uncoordinated nitrogen atoms of the two trans Me(2)pz ligands. The application of synthetic routes initially developed for the preparation of lanthanoid pyrazolates provides detailed insight into the similarities and differences between the two groups of metals and structures of their complexes.     

L-cysteine as sustainable and effective sulfur source in the synthesis of diaryl sulfides and heteroarenethiols

L-cysteine, a natural and essential amino acid, was employed as novel sulfur source in the synthesis of symmetrical diaryl sulfides from a variety of aryl iodides in moderate to excellent yields. A tandem three steps’ reactions including C(sp²)-S bond formation, C(sp³)-S bond cleavage and another C(sp²)-S bond formation were proposed to be involved in this conversion. This protocol was featured by broad substrate scope and good functional group tolerance. In addition, heteroarenes including benzothiazoles and benzoxazoles were successfully converted into the corresponding heteroarenethiols using L-cysteine as C-H mercaptalization reagent.     

Rhodium‐Catalyzed CH Annulation of Nitrones with Alkynes: A Regiospecific Route to Unsymmetrical 2,3‐Diaryl‐Substituted Indoles

The direct C? H annulation of anilines or related compounds with internal alkynes provides straightforward access to 2,3‐disubstituted indole products. However, this transformation proceeds with poor regioselectivity in the synthesis of unsymmetrically 2,3‐diaryl substituted indoles. Herein, we report the rhodium(III)‐catalyzed C? H annulation of nitrones with symmetrical diaryl alkynes as an alternative method to prepare 2,3‐diaryl‐substituted N‐unprotected indoles with two different aryl groups. One of the aryl substituents is derived from N?C‐aryl ring of the nitrone and the other from the alkyne substrate, thus providing the indole products with exclusive regioselectivity.     

Rhodium‐Catalyzed C?H Annulation of Nitrones with Alkynes: A Regiospecific Route to Unsymmetrical 2,3‐Diaryl‐Substituted Indoles

The direct C H annulation of anilines or related compounds with internal alkynes provides straightforward access to 2,3‐disubstituted indole products. However, this transformation proceeds with poor regioselectivity in the synthesis of unsymmetrically 2,3‐diaryl substituted indoles. Herein, we report the rhodium(III)‐catalyzed C H annulation of nitrones with symmetrical diaryl alkynes as an alternative method to prepare 2,3‐diaryl‐substituted N‐unprotected indoles with two different aryl groups. One of the aryl substituents is derived from NC‐aryl ring of the nitrone and the other from the alkyne substrate, thus providing the indole products with exclusive regioselectivity.     

Microwave‐Assisted Cross‐Coupling for the Construction of Diaryl Sulfides

The construction of diaryl sulfides through the cross‐coupling of aryl iodides and thiols in microwave heating is described. By using this method, a variety of diaryl sulfides can be prepared in a mild condition and in high yields. Deactivated 4‐nitrothiophenol was effective to afford the product in 94% yield. Sterically hindered ortho‐substituted aryl iodides or thiophenols provided diaryl sulfides effectively by this microwave‐assisted coupling reaction.     

Role of donor and secondary interactions in the structures and thermal properties of alkaline-earth and rare-earth metal pyrazolates

The addition of neutral coligands to reduce the aggregation and improve the volatility of potential heavy alkaline-earth metal chemical vapor deposition (CVD) precursors has typically resulted in liberation of the coligand upon heating. A new series of dinuclear alkaline-earth and rare-earth metal pyrazolates, bis[bis(3,5-di-tert-butylpyrazolato)(tetrahydrofuran)calcium] (1), bis[bis(3,5-di-tert-butylpyrazolato)(tetrahydrofuran)strontium] (2), and bis[bis(3,5-di-tert-butylpyrazolato)bis(tetrahydrofuran)barium] (3), have been obtained from our previous donor-free oligonuclear complexes [{M(3,5-tBu2pz)2}n] (5, M = Ca, n = 3; 6, M = Sr, n = 4; 7, M = Ba, n = 6) by treatment with tetrahydrofuran (THF). Compounds 1-3, as well as the europium analogue bis[bis(3,5-di-tert-butylpyrazolato)(tetrahydrofuran)europium(II)] (4), can also be prepared by direct reaction of the metals and pyrazole in THF and anhydrous liquid ammonia. Recrystallization from hexane led to single crystals of 2-4, while the powder diffraction pattern of 1 revealed it to be isostructural with the previously published bis[bis(3,5-di-tert-butylpyrazolato)(tetrahydrofuran)ytterbium(II)] (8), providing important insight into differences and similarities between the two groups of metals. Detailed structural analysis of the compounds reveals secondary interactions including pi-bonding and agostic interactions, which are considered essential in stabilizing the metal complexes. The direct comparison of structural features and thermal properties (as evaluated by thermogravimetric analysis and sublimation studies) of the donor-free oligonuclear and the donor-containing dinuclear species offers a better understanding of the role of donors and secondary interactions.