Asymmetric addition of dimethylzinc to N-tosylarylimines catalyzed by a rhodium-diene complex toward the synthesis of chiral 1-arylethylamines

[STRUCTURE: SEE TEXT] A rhodium complex coordinated with a chiral diene, (R,R)-2,5-diphenylbicyclo[2.2.2]octa-2,5-diene (Ph-bod), catalyzed the asymmetric addition of dimethylzinc to N-tosylarylimines to give high yields of chiral 1-aryl-1-ethylamines with high enantioselectivity (94-98% ee).     

C2-symmetric bicyclo[2.2.2]octadienes as chiral ligands: their high performance in rhodium-catalyzed asymmetric arylation of N-tosylarylimines

Asymmetric synthesis of diarylmethylamines with high enantioselectivity (95-99% ee) was realized by use of a new C2-symmetric diene ligand, (1R,4R)-2,5-diphenylbicyclo[2.2.2]octa-2,5-diene (Ph-bod*), for the rhodium-catalyzed asymmetric arylation of N-tosylarylimines with arylboroxines.     

First chiral selenium ylides used for asymmetric conversion of aldehydes into epoxides

Enantioenriched selenonium ylides have been generated by addition of benzyl bromide to C2 symmetric (2R,5R)-2,5-dimethylselenolane in the presence of NaOH, and subsequently reacted with a variety of aldehydes to give oxiranes with excellent enantiomeric excesses (a catalytic version has been achieved); also, an aliphatic cyclic hypervalent dibromoselenurane structure has been demonstrated by X-ray analysis.     

Highly potent chiral labeling reagents for the discrimination of chiral alcohols.

Highly sensitive chiral labeling reagents, (1R,2R)- and (1S,2S)-2-(2,3-anthracenedicarboximido)cyclohexanecarboxylic acids [(1R,2R)- and (1S,2S)-A] and (1R,2R)- and (1S,2S)-2-(2,3-naphthalenedicarboximido)cyclohexanecarboxylic acids [(1R,2R)- and (1S,2S)-A'], were prepared. Reagent A has enabled us to discriminate the enantiomers of anteiso fatty alcohols up to C9 methyl branching by 1H NMR, and both reagents A and A' have allowed up to C16 methyl branching at the 10(-15) molar level by fluorescence detected reversed-phase HPLC.     

A rational approach to the design and synthesis of chiral organopalladium-amine complexes

A new chiral auxiliary, (+/-)-N,N-dimethyl-1-(2,5-dimethylphenyl)ethylamine, was designed and synthesized in two steps from 1-acetyl-2,5-dimethylbenzene. Its cyclopalladated dimeric complex could be efficiently resolved via the formation of (S)-prolinate derivatives. Both hand forms of the complex could be obtained in similar yields. Despite the enormous inter-chelate steric constraints, the bulky monodentate ligand 3,4-dimethyl-1-phenylphosphole (DMPP) is able to coordinate regiospecifically to the orthopalladated 2,5-dimethylbenzylamine unit trans to the NMe(2) group. Compared to its naphthylamine analogue, the orthopalladated 2,5-dimethylbenzylamine complex exhibits a significantly higher stereoselectivity in the chiral template promoted asymmetric cycloaddition reaction between DMPP and ethyl vinyl ketone.     

Unprecedented stereoselective synthesis of catalytically active chiral Mo3CuS4 clusters

Cluster excision of polymeric {Mo3S7Cl4}n phases with chiral phosphane (+)-1,2-bis[(2R,5R)-2,5-(dimethylphospholan-1-yl)]ethane ((R,R)-Me-BPE) or with its enantiomer ((S,S)-Me-BPE) yields the stereoselective formation of the trinuclear cluster complexes [Mo3S4{(R,R)-Me-BPE}3Cl3]+ ([(P)-1]+) and [Mo3S4{(S,S)-Me-BPE}3Cl3]+ ([(M)-1]+), respectively. These complexes possess an incomplete cuboidal structure with the metal atoms defining an equilateral triangle and one capping and three bridging sulfur atoms. The P and M symbols refer to the rotation of the chlorine atoms around the C3 axis, with the capping sulphur atom pointing towards the viewer. Incorporation of copper into these trinuclear complexes affords heterodimetallic cubane-type compounds of formula [Mo3CuS4{(R,R)-Me-BPE}3Cl4]+ ([(P)-2]+) or [Mo3CuS4{(S,S)-Me-BPE}3Cl4]+ ([(M)-2]+), respectively, for which the chirality of the trinuclear precursor is preserved in the final product. Cationic complexes [(P)-1]+, [(M)-1]+, [(P)-2]+, and [(M)-2]+ combine the chirality of the metal cluster framework with that of the optically active diphosphane ligands. The known racemic [Mo3CuS4(dmpe)3Cl4]+ cluster (dmpe = 1,2-bis(dimethylphosphanyl)ethane) as well as the new enantiomerically pure Mo3CuS4 [(P)-2]+ and [(M)-2]+ complexes are efficient catalysts for the intramolecular cyclopropanation of 1-diazo-5-hexen-2-one (3) and for the intermolecular cyclopropanation of alkenes, such as styrene and 2-phenylpropene, with ethyl diazoacetate. In all cases, the cyclopropanation products were obtained in high yields. The diastereoselectivity in the intermolecular cyclopropanation of the alkenes and the enantioselectivity in the inter- or intramolecular processes are only moderate.     

Absolute configuration and conformational stability of (+)-2,5-dimethylthiolane and (-)-2,5-dimethylsulfolane

Enantiopure (+)-2,5-dimethylthiolane and (-)-2,5-dimethylsulfolane were prepared using literature procedures and investigated using vibrational circular dichroism (VCD). Experimental absorption and VCD spectra of (+)-2,5-dimethylthiolane and (-)-2,5-dimethylsulfolane in CCl(4) solution in the 2000-900 cm(-)(1) region were compared with the ab initio predictions of absorption and VCD spectra obtained with density functional theory using the B3LYP/6-311G(2d, 2p) basis set for different conformers of (2R,5R)-2,5-dimethylthiolane and (2R,5R)-2,5-dimethylsulfolane. This comparison indicates that (+)-2,5-dimethylthiolane is of the (2R,5R)-configuration and has two predominant conformations in CCl(4) solution. In addition, (-)-2,5-dimethylsulfolane is of (2R,5R)-configuration and has only one predominant conformation. The stereochemical assignment is in agreement with literature.     

Development of homogeneous and heterogenized rhodium(I) and palladium(II) complexes with ligands based on a chiral proton sponge building block and their application as catalysts

Chiral compounds prepared from proton sponge building block 8-((2R,5R)-2,5-dimethylpyrrolidin-1-yl)naphthalen-1-amine were found to be effective chiral ligands for obtaining complexes of rhodium(I) and palladium(II) by reaction with [RhCl(cod)](2), PdCl(2)(cod) or Pd(OAc)(2). The complexes bearing triethoxysilane groups were immobilized on mesoporous MCM-41 in order to obtain new heterogeneous catalysts. Both materials are active in the hydrogenation of alkenes and could be recycled without loss of activity or enantioselectivity.     

Rhodium-Catalyzed Asymmetric Conjugate Additions of Boronic Acids to enones using DIPHONANE: a novel chiral bisphosphine ligand

[reaction: see text] The synthesis of a novel enantiopure C2-symmetric bisphosphine, DIPHONANE, was accomplished starting from 2,5-norbornadione, utilizing (R,R)- and/or (S,S)-(2,3-O-di[(phenylamino)carbonyl]tartaric acid for the resolution of an intermediate phosphineoxide. The application of this ligand in the rhodium-catalyzed asymmetric conjugate addition of boronic acids to cyclic enones provides the 1,4-addition products in good yields (69-98%) and high ee's (78-95% ee). A byproduct arising from a consecutive 1,4-addition and 1,2-addition was also observed.     

Methods for the synthesis of 5,6,7,8-tetrahydro-1,8-naphthyridine fragments for alphaVbeta3 integrin antagonists

The preparation of 3-(5,6,7,8-tetrahydro-1,8-naphthyridin-2-yl)propan-1-amine 2a and 3-[(7R)-7-methyl-5,6,7,8-tetrahydro-1,8-naphthyridin-2-yl]propan-1-amine 2b, key intermediates in the synthesis of alpha(V)beta(3) antagonists, is described. The syntheses rely on the efficient double Sonogashira reactions of 2,5-dibromopyridine 3 with acetylenic alcohols 4a/4b and protected propargylamines 10a-e followed by Chichibabin cyclizations of 3,3'-pyridine-2,5-diyldipropan-1-amines 9a/9b.     

Bis(2-bromoethyl) selenium dibromide as the selenium-introducing reagent: One-pot preparation of 2,5-bis(alkoxymethyl)tetrahydroselenophenes by the cyclization of 1,5-hexadiene

The reaction of bis(2-bromoethyl)selenium dibromide (1a) with 1,5-hexadiene (2) in methanol or ethanol affords 2,5-bis(alkoxymethyl)tetrahydroselenophene-1,1-dibromides (R = CH₃ (3b), R = C₂H₅ (3c)) via 2,5-bis(bromomethyl)tetrahydroselenophene-1,1-dibromide (3a). The reaction of 1a with 2 in 1-propanol, 2-methyl-1-propanol or 1-butanol in the presence of sodium carbonate gave 2,5-bis(alkoxymethyl)tetrahydroselenophene (R = C₃H₇ (4a), R = (CH₃)₂CHCH₂ (4b) and R = C₄H₉ (4c)) via 3a. The ratios of the trans and cis isomers of 3a–3c are 3:2. In addition, the structure of trans-2,5-bis(methoxymethyl)tetrahydroselenophene-1,1-dibromide (trans-3b) was determined by X-ray crystallography.     

Two mono- and dinuclear Eu(iii) enantiomeric pairs based on chiral bis-bidentate bridging ligands: synthesis, structures, luminescent and ferroelectric properties

Using the enantiomeric bis-bidentate bridging ligands (+)/(-)-2,5-bis(4,5-pinene-2-pyridyl)pyrazine (L(S)/L(R)) and depending on the ratio control of reactants, two mono- and dinuclear Eu(iii)-based enantiomeric pairs with the formulae Eu(dbm)(3)L(R/S)·2H(2)O (L(R) in R-1, L(S) in S-1 and dbm = dibenzoylmethanato) and Eu(2)(dbm)(6)L(R/S)·H(2)O (L(R) in R-2 and L(S) in S-2) have been stereoselectively synthesized and structurally characterized. The circular dichroic (CD) spectra confirmed their chiroptical activities and enantiomeric natures. The homochiral dinuclear species represents the first example of a polynuclear lanthanide β-diketonate complexes with circular dichroic and crystallographic evidences. The photoluminescent properties studies revealed that both mono- and dinuclear Eu(iii) complexes exhibited the characteristic red emissions of Eu(iii) ions in the solid state (at 77 K and 300 K) and CH(2)Cl(2) solution. Notably, the photophysical properties of the mononuclear enantiomers were superior to the dinuclear species. Interestingly, R-2 displayed a ferroelectric property at room temperature, which was not observed for R-1 due to the lack of crystalline polarity. R/S-2 are the first examples of homochiral polynuclear lanthanide complexes with luminescence and ferroelectric properties, being potential multifunctional materials.     

High performance of a chiral diene-rhodium catalyst for the asymmetric 1,4-addition of arylboroxines to alpha,beta-unsaturated ketones

[reaction: see text] A rhodium complex coordinated with (S,S)-2,5-dibenzylbicyclo[2.2.2]octa-2,5-diene (Bn-bod) showed high catalytic activity and high enantioselectivity in the asymmetric 1,4-addition of arylboroxines to cyclic alpha,beta-unsaturated ketones, 0.005-0.01 mol % of the catalyst giving high yields of the addition products with not lower than 94% ee. The turnover frequency of the catalyst is up to 1.4 x 10(4) h(-1).     

LC polyimides. XXVII. Cholesteric poly(ester-imide)s derived from chiral i-pentyloxyterephthalic acids

(S)-Pentyloxyterephthalic acid was prepared by alkylation of dimethyl trimethylsiloxyterephthalate with (S)-2-methylbutan-1-ol tosylate. (S,S)-2,5-bis-i-pentyloxyterephthalic acid was prepared analogously by alkylation of diethyl-2,5-bis(trimethylsiloxy)terephthalate. A series of cholesteric poly(ester-imide)s was synthesized from (S)-pentyloxyterephthalic acid and N-(4'-hydroxyphenyl)-4-hydroxyphthalimide. 2-(4'-Chlorophenoxy)terephthalic acid was used as comonomer. The 1 : 1 copolyester of both terephthalic acids forms a Grandjean texture in the shearing of the cholesteric melt. A second series of cholesteric poly(ester-imide)s was prepared from (S,S)-2,5-bispentyloxyterephthalic acid and the aforementioned imide diphenol. In this case 2,5-bis(dodecyloxy)terephthalic acid was used as comonomer to lower the melting point. The cholesteric phases of the resulting copoly(ester-imide)s did not form a Grandjean texture. © 1996 John Wiley & Sons, Inc.     

Stereoselective synthesis of functionalized trans-2,5-disubstituted tetrahydrofurans

[reaction: see text] The addition of the titanium enolates of N-acetyl, N-propionyl, and N-bromoacetyl (R)-oxazolidin-2-ones to gamma-lactol 2, derived from (S)-glutamic acid, afforded trans- and cis-2,5-disubstituted tetrahydrofurans (trans/cis ratio: R = H, 2:1; R = Me, 8:1; R = Br, 10:1) after desilylation with aqueous HF/CH3CN. Chromatographic separation and LiBH4 reduction allowed the efficient preparation of the corresponding trans-2,5-disubstituted tetrahydrofuran diols and the recovery of the chiral auxiliary.     

Synthesis and characterization of some new C2 symmetric chiral bisamide ligands derived from chiral Feist's acid

The hemilabile chiral C2 symmetrical bidentate substituted amide ligands (1R,2R)-5(a-d) and (1S,2S)-6(a-d) were synthesized in quantitative yield from (1R,2R)-(+)-3-methylenecyclo-propane-1,2-dicarboxylic acid (1R,2R)-3 and (1S,2S)-(-)-3-methylene-cyclopropane-1,2-dicarboxylic acid (1S,2S)-3, in two steps, respectively. The chiral Feist's acids (1R,2R)-3 and (1S,2S)-3 were obtained in good isomeric purity by resolution of trans-(±)-3-methylene-cyclopropane-1,2-dicarboxylic acid from an 8:2 mixture of tert-butanol and water, using (R)-(+)-α-methylbenzyl amine as a chiral reagent. This process is reproducible on a large scale. All these new synthesized chiral ligands were characterized by 1H-NMR, 13C-NMR, IR, and mass spectrometry, as well as elemental analysis and their specific rotations were measured. These new classes of C2 symmetric chiral bisamide ligands could be of special interest in asymmetric transformations.     

X-Ray structural investigation of 1,3,6-trichloro-3,6-dimethylcycloheptanecarbonitrile and 2,5-dimethyl-2,5-dichlorohexane — Products of the reaction of 2,5-dimethyl-1,5-hexadiene with trichloroacetonitrile

Addition of trichloroacetonitrile to 2,5-dimethyl-1,5-hexadiene in the presence of cuprous amine complexes is studied. Single crystal X-ray diffraction unambiguously proves that the main product is a racemic mixture of the cyclic symmetric nitrile: (1r,3R,6S)-and (1r,3S,6R)-1,3,6-trichloro-3,6-dimethylcycloheptanecarbonitrile. Established relative configuration of the product confirms the ring closure mechanism suggested before. Also, a side product 2,5-dimethyl-2,5-dichlorohexane is isolated (the product of hydrochlorination of the starting alkadiene). Low-temperature (190 K) structural examination of this centrosymmetrical molecule indicates that the unit cell comprises one molecule.     

Hybrid polyacrylamide chiral stationary phases for HPLC prepared by surface-initiated photopolymerization

Two hybrid polyacrylamide chiral stationary phases (CSPs) for HPLC have been synthesized by a new surface-initiated photo-induced radical polymerization approach of enantiopure N,N'-diacryloyl derivatives of (1R,2R)-diaminocyclohexane (CSP1) and (1R,2R)-diphenylethylenediamine (CSP2). This system is based on the activation of mesoporous silica microparticles by chemically bonded trichloroacetyl groups and dimanganese decacarbonyl as catalyst. UV irradiation was performed using a lab-made quartz photochemical reactor, ad hoc designed for the photo-induced polymerization process on the surface of microparticles. The two phases were evaluated and compared as chromatographic supports for the enantioselective HPLC of model chiral compounds. Their physico-chemical properties and chromatographic performances were also evaluated in comparison with those exhibited by the homologue CSPs obtained by the grafting-from thermal-induced process (CSP3 and CSP4). The new photopolymerization approach yielded higher grafting density than the thermal-induced one, especially in the case of the less reactive monomer (the diacryloyl derivative of (1R,2R)-diphenylethylenediamine), good chromatographic efficiency and a broad application field under normal phase and polar organic mode conditions.     

Methyl 2-azido-3-O-benzyl-2-deoxy-α-D-mamnofuranoside as a divergent intermediate for the synthesis of polyhydroxylated piperidines and pyrrolidines: synthesis of 2,5-dideoxy-2,5-imino-D-mannitol [2R,5R-dihydroxymethyl-3R,4R-dihydroxypyrrolidine]

The synthesis of methyl 2-azido-3-O-benzyl-2-deoxy-α-D-mannofuranoside (1) from D-glucose is reported; the conversions of (1) into derivatives of methyl 3-O-benzyl-2,6-dideoxy-2,6-imino-α-D-mannofuranoside (as precursors for the synthesis of polyhydroxylated piperidines) and into the hydroxylated pyrrrolidine, 2,5-dideoxy-2,5-imino-D-mannitol [2R,5R-dihydroxymethyl-3R,4R-dihydroxypyrrolidine] are described.     

A new series of dinuclear Au(I) complexes linked by diethynylpyridine groups

A series of novel digold complexes incorporating ethynyl pyridine derivatives as a spacer unit, [(R(3)P)Au(C[triple bond]C)X(C[triple bond]C)Au(PR(3))] (R = Ph, X = 2,5-pyridine (1); R = Cy (cyclohexane), X = 2,5-pyridine (2); R = Ph, X = 2,6-pyridine (3); R = Ph, X = 2,5'-bipyridine (4); R = Ph, X = 2,6'-bipyridine (5)), has been synthesised. All the complexes have been characterised spectroscopically and the structures determined by single-crystal X-ray crystallography. The central (C[triple bond]C)(X)(C[triple bond]C) unit is essentially linear for complexes 1, 2 and 4 and kinked for complexes 3 and 5, but only in 1, with the shortest spacer group and the less bulky phosphine ligand, is there evidence of d(10)...d(10) Au...Au interactions (Au-Au 3.351(2) A). The solution UV/visible absorption and emission spectra for all the complexes are similar to those of the free ligands suggesting that the spectra are dominated by pi-pi* ligand-centred transitions and this is confirmed by DFT calculations.