Preparation,Thermal Behaviour,and Crystal Structure of MgAl<Subscript>2</Subscript>F<Subscript>8</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>

Summary.  Single crystals of MgAl₂F₈(H₂O)₂ have been obtained under hydrothermal conditions (250°C, 14 d) from a starting mixture of AlF₃ and MgAlF₅(H₂O)₂ in a 5% (w/w) HF solution. The crystal structure has been determined and refined from single crystal data (Fmmm (#69), Z = 4, a = 7.2691(7), b = 7.0954(16), c = 12.452(2) ?, 281 structure factors, 27 parameters, R(F ² > 2σ (F ²)) = 0.0282, wR(F ² all) = 0.0885). The obtained crystals were systematically twinned according to (010/100/001) as twinning matrix, reflecting the pseudo-tetragonal metric. The crystal structure is composed of perowskite-type layers built of corner sharing AlF₆ octahedra with an overall composition of AlF₄ ⁻ which are connected via common fluorine atoms of [MgF_4/2(H₂O)_2/1] octahedra. Group-subgroup relations of MgAl₂F₈(H₂O)₂ to WO₃(H₂O)_0.33 and to other M(II)M(III)₂ F₈(H₂O)₂ structures are briefly discussed. Above 570°C, MgAl₂F₈(H₂O)₂ decomposes under elimination of water into α-AlF₃, β-AlF₃, and MgF₂. Received October 29, 2001. Accepted (revised) December 6, 2001     

Hydrothermal synthesis and thermodynamic properties of 2CaO·3B<Subscript>2</Subscript>O<Subscript>3</Subscript>·H<Subscript>2</Subscript>O

2CaO·3B₂O₃·H₂O which has non-linear optical (NLO) property was synthesized under hydrothermal condition and identified by XRD, FTIR and TG as well as by chemical analysis. The molar enthalpy of solution of 2CaO·3B₂O₃·H₂O in HCl·54.572H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HCl·54.501H₂O and of CaO in (HCl+H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5733.7±5.2) kJ mol⁻¹ of 2CaO·3B₂O₃·H₂O was obtained. Thermodynamic properties of this compound were also calculated by a group contribution method.     

Steric effects on the singlet-triplet energy gaps of five-membered ring R<Subscript>2</Subscript>C<Subscript>4</Subscript>H<Subscript>2</Subscript>M

Thermal internal energy gaps, ΔE _s−t; enthalpy gaps, ΔH _s−t; Gibbs free energy gaps, ΔD _s−t, between singlet (s) and triplet (t) states of R₂C₄H₂M (M = C, Si, and Ge) were calculated at B3LYP/6-311++G** level of theory. The ΔG _s−t of R₂C₄H₂C was increased in the order (in kcal/mol): R = −CH₃ (−10.51) > −H (−9.59) > i-Pr (−9.51) > t-Bu (−8.98). While, the ΔG _s−t of R₂C₄H₂Si and R₂C₄H₂Ge were increased in the order (in kcal/mol): −CH₃ (17.01) > i-Pr (15.30) > −H (15.26) > t-Bu (14.35) and -H (22.79) > −CH₃ (22.69) > i-Pr (21.66) > t-Bu (21.01), respectively.     

Standard molar enthalpies of formation of [RE(Gly)<Subscript>4</Subscript>(Im)(H<Subscript>2</Subscript>O)](ClO<Subscript>4</Subscript>)<Subscript>3</Subscript> (<Emphasis Type="Italic">RE</Emphasis>=Eu,Sm)

The two complexes, [RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)(RE = Eu, Sm), have been synthesized and characterized. The standard molar enthalpies of reaction for the following reactions, RECl₃·6H₂O(s)+4Gly(s)+Im(s)+3NaClO₄(s) = =[RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l), were determined by solution-reaction colorimetry. The standard molar enthalpies of formation of the two complexes at T = 298.15 K were derived as Δ_f H _m^Θ {Eu(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = = −(3396.6±2.3) kJ mol⁻¹ and Δ_f H _m^Θ {Sm(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = −(3472.7±2.3) kJ mol⁻¹, respectively.     

Study on the non-isothermal kinetics of decomposition of 4Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>·2H<Subscript>2</Subscript>O<Subscript>2</Subscript>·NaCl

The non-isothermal decomposition kinetics of 4Na₂SO₄·2H₂O₂·NaCl have been investigated by simultaneous TG-DSC in nitrogen atmosphere and in air. The decomposition processes undergo a single step reaction. The multivariate nonlinear regression technique is used to distinguish kinetic model of 4Na₂SO₄·2H₂O₂·NaCl. Results indicate that the reaction type Cn can well describe the decomposition process, the decomposition mechanism is n-dimensional autocatalysis. The kinetic parameters, n, A and E are obtained via multivariate nonlinear regression. The n ^th-order with autocatalysis model is used to simulate the thermal decomposition of 4Na₂SO₄·2H₂O₂·NaCl under isothermal conditions at various temperatures. The flow rate of gas has little effect on the decomposition of 4Na₂SO₄·2H₂O₂·NaCl.     

Synthesis and structure of the polymeric complex [Ag<Subscript>2</Subscript>(Ph<Subscript>3</Subscript>P)<Subscript>2</Subscript>B<Subscript>10</Subscript>H<Subscript>10</Subscript>]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>

A method for the synthesis of the silver(I) complex with the closo-decaborate anion and triphenylphosphine [Ag₂(Ph₃P)₂B₁₀H₁₀] _n was developed and the structure of this complex was studied. The polymeric chain of the complex is formed with participation of Ag(I) atoms, which coordinate the B₁₀H₁₀²⁻ anions through the apical (B(1)–B(2), B(9)–B(10)) and equatorial (B(3)–B(6), B(5)–B(8)) edges, the metalligand bonding occurring through three-center two-electron bonds (MHB). The P atoms of two triphenylphosphine molecules are also incorporated in the inner coordination sphere of the metal: the CN of the silver atom is 4 + 1.     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.     

Thermochemistry of 2-Aminopyridine (C<Subscript>5</Subscript>H<Subscript>6</Subscript>N<Subscript>2</Subscript>)(s)

The molar enthalpies of solution of 2-aminopyridine at various molalities were measured at T=298.15 K in double-distilled water by means of an isoperibol solution-reaction calorimeter. According to Pitzer’s theory, the molar enthalpy of solution of the title compound at infinite dilution was calculated to be D_solH_m^￥ = 14.34 kJ·mol^-1\Delta_{\mathrm{sol}}H_{\mathrm{m}}^{\infty} = 14.34~\mbox{kJ}\cdot\mbox{mol}^{-1}, and Pitzer’s ion interaction parameters b_MX^(0)L, b_MX^(1)L\beta_{\mathrm{MX}}^{(0)L}, \beta_{\mathrm{MX}}^{(1)L}, and C_MX^fLC_{\mathrm{MX}}^{\phi L} were obtained. Values of the relative apparent molar enthalpies ( ^φ L) and relative partial molar enthalpies of the compound ([`(L)]₂)\bar{L}_{2}) were derived from the experimental enthalpies of solution of the compound. The standard molar enthalpy of formation of the cation C₅H₇N₂ ⁺\mathrm{C}_{5}\mathrm{H}_{7}\mathrm{N}_{2}^{ +} in aqueous solution was calculated to be D_fH_m^o(C₅H₇N₂⁺,aq)=-(2.096±0.801) kJ·mol^-1\Delta_{\mathrm{f}}H_{\mathrm{m}}^{\mathrm{o}}(\mathrm{C}_{5}\mathrm{H}_{7}\mathrm{N}_{2}^{+},\mbox{aq})=-(2.096\pm 0.801)~\mbox{kJ}\cdot\mbox{mol}^{-1}.     

Photochemical degradation of typical halogenated herbicide 2,4-D in drinking water with UV/H<Subscript>2</Subscript>O<Subscript>2</Subscript>/micro-aeration

UV/H₂O₂/micro-aeration is a newly developed process based on UV/H₂O₂. Halogenated pesticide 2,4-dichlorophenoxyacetic acid (2,4-D) photochemical degradation in aqueous solution was studied under various solution conditions. The UV intensity, initial 2,4-D concentrations and solution temperature varied from 183.6 to 1048.7 μW·cm⁻², from 59.2 to 300.0 μg·L⁻¹ and from 15 to 30°C, respectively. The concentration of hydrogen peroxide (H₂O₂) and pH ranged from 0 to 50 mg·L⁻¹ and 5 to 9, and different water quality solutions (tap water, distilled water and deionized water) were examined in this study. With initial concentration of about 100 μg·L⁻¹, more than 95.6% of 2,4-D can be removed in 90 min at intensity of UV radiation of 843.9 μW·cm⁻², H₂O₂ dosage of 20 mg·L⁻¹, pH 7 and room temperature. The removal efficiency of 2,4-D by UV/H₂O₂/micro-aeration process is better than UV/H₂O₂ process. The photodecomposition of 2,4-D in aqueous solution follows pseudo-first-order kinetics. 2,4-D is greatly affected by UV irradation intensity, H₂O₂ dosage, initial 2,4-D concentration and water quality solutions, but it appears to be slightly influenced by pH and temperature. There is a linear relationship between rate constant k and UV intensity and initial H₂O₂ concentration, which indicates that higher removal capacity can be achieved by the improvement of these factors. Finally, a preliminary cost analysis reveals that UV/H₂O₂/micro-aeration process is more cost-effective than the UV/H₂O₂ process in the removal of 2,4-D from drinking water.     

Structure and properties of H<Subscript>8</Subscript>(PW<Subscript>11</Subscript>TiO<Subscript>39</Subscript>)<Subscript>2</Subscript>O heteropoly acid

Heteropoly acid (HPA) H₈(PW₁₁TiO₃₉)₂O·xH₂O (I) is synthesized by three different ways and studied by chemical analysis, potentiometric titration, mass-spectrometry, IR, ³¹P, ¹⁸³W, and ¹⁷O NMR spectroscopy, thermogravimetry, and transmission electron microscopy. Anion I consists of two subparticles of the Keggin structure bridged by Ti-O-Ti. The dimeric anion exists in HPA aqueous solutions at [I] > 0.02 M. At pH > 0.6 it splits to a [PW₁₁TiO₄₀]⁵⁻ monomer stable up to pH ∼ 6. When heated (150–400)°C, I splits into H₃PW₁₂O₄₀ and, apparently, H₃PW₁₀Ti₂O₃₈ without phase separation. Thermolysis products are soluble and when dissolved in water turn again into I. Complete decomposition of I to oxides occurs at ∼450°C.     

Structure of heteroassociates formed in the HF-(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>2</Subscript>O liquid system

The aim of this work was to determine the structure of stable heteroassociates (HAs) with the stoichiometric ratios 1:2, 2:1, and 4:1 of molecules formed in the HF-(C₂H₅)₂O binary liquid system. The stretching frequencies of HF molecules found for each HA using a special procedure for processing IR spectra were compared with the calculated frequencies V HF of the stable molecular complexes (HF)_m ((C₂H₅)₂O)_n (m = 1, 2, 4, 8; n = 1, 2) with different topologies by the density functional method (B3LYP/6-31++G(d,p)). As a result, it was shown that the most stable (among H-bonded complexes with the same stoichiometric ratio of molecules) HAs HF((C₂H₅)₂O)₂, (HF)₄ ((C₂H₅)₂O)₂, and (HF)₈-((C₂H₅)₂O)₂ formed in HF solutions in diethyl ether. All of them had a cyclic structure and a common peculiarity of structure: only one lone electron pair of the oxygen atom of the (C₂H₅)₂O molecules is involved in hydrogen bonding.     

Hydrothermal synthesis and crystal structure of [Ni(Bptc)<Subscript>2</Subscript>(Bimb)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>]

In the compound [Ni(Bptc)₂(Bimb)₂(H₂O)₂] (I), where H₄Bptc is 3,3′,4,4′-biphenyltetracarboxylic acid; Bimb is 4,4′-bis(1-imidazolyl)biphenyl), Ni(II) has a distorted octahedral coordination geometry, which was bonded with two N atoms from two Bimb ligands, two O atoms from two H₂Bptc²⁻ ligands and two water O atoms. The crystal structure of compound I is stabilized by the π-π-stacking and hydrogen bonds interaction.     

Photochemical substitution of benzene in the iron cyclohexadienyl complex [(η<Superscript>5</Superscript>-C<Subscript>6</Subscript>H<Subscript>7</Subscript>)Fe(η-C<Subscript>6</Subscript>H<Subscript>6</Subscript>)]<Superscript>+</Superscript>

The visible light irradiation of the [(η⁵-C₆H₇)Fe(η-C₆H₆)]⁺ cation (1) in acetonitrile resulted in the substitution of the benzene ligand to form the labile acetonitrile species [(η⁵-C₆H₇)Fe(MeCN)₃]⁺ (2). The reaction of 1 with Bu^tNC in MeCN produced the stable isonitrile complex [(η⁵-C₆H₇)Fe(Bu^tNC)₃]⁺ (3). The photochemical reaction of cation 1 with pentaphosphaferrocene Cp*Fe(η-cyclo-P₅) afforded the triple-decker cation with the bridging pentaphospholyl ligand, [(η⁵-C₆H₇)Fe(μ-η:η-cyclo-P₅)FeCp*]⁺ (4). The latter complex was also synthesized by the reaction of cation 2 with Cp*Fe(η-cyclo-P₅). The structure of the complex [3]PF₆ was established by X-ray diffraction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2088–2091, November, 2007.     

Calculation of phase behavior and chemical transformations in H<Subscript>2</Subscript>O-NH<Subscript>3</Subscript>-CO<Subscript>2</Subscript> system using a modified hole quasichemical model

A technique for calculation of phase equilibria over a wide range of temperatures and pressures for fluid systems, where chemical interactions lead to the formation of ionic species, was developed. A hole quasichemical model was modified to account for chemical reactions and electrostatic interactions in the liquid phase. The densities and dielectric permittivity as function of a solution composition was taken into account in describing the electrostatic contribution to the Gibbs energy (Pitzer approximation) and Born contribution, that is required for thermodynamic consistency of simulation results. A method of assessing the appropriate relationships for mixtures of ammonia-water and ternary solutions was suggested. Calculations of the phase behavior of the H₂O-NH₃ system in the entire range of concentrations in the temperature interval 373–588 K at pressures up to 200 bar, and also of H₂O-NH₃-CO₂ system containing NH₃ to 30 mol% and CO₂ up to 14 mol% in the temperature range 373–473 K at pressures to 88 bar gave satisfactory agreement with experimental data. Concentrations of the molecular and ionic individuals in the liquid phase, depending on the overall composition of the mixture were evaluated.     

Volumetric and Viscometric Studies on Sodium Nitrate and Potassium Nitrate in Aqueous and H<Subscript>2</Subscript>O-urea Solutions

Summary.  Density and viscosity of NaNO₃ and KNO₃ in aqueous and in H₂O-urea solutions were determined as a function of electrolyte concentrations at 308, 313, 318, 323, and 328 K, respectively. The apparent molal volume (φ _v ) of the electrolytes were found to be linear functions of the square root of the solute molality (b). The φ _v and data were fitted to the Masson equation [1] by the least square method to obtain the apparent molar volume at infinite dilution (φ _v ^{^}), which is practically equal to the partial molar volume . The viscosity coefficients A and B were calculated on the basis of the viscosity of the solutions and the solvent concerned using the Jones–Dole [2] equation. The activation parameters for viscous flow (ΔG ^≠, ΔS ^≠, and ΔH ^≠) were calculated according to Eyring [3]. The values of for the two systems were also calculated from B-coefficient data. The results were found to be of opposite nature in the two electrolyte systems. Where sodium nitrate showed structure making behaviour both in aqueous and in H₂O-urea solutions, KNO₃ showed structure breaking behaviour in aqueous solutions and structure making behaviour in 5 molal H₂O-urea solutions in the studied temperature range. The behaviour of these two electrolytes in aqueous binary and in aqueous-urea ternary systems are discussed in terms of charge, size, and hydrogen bonding effects. Corresponding author. E-mail: chemistry_ru@yahoo.com Received January 24, 2002; accepted (revised) April 5, 2002     

Subsolidus phase diagram of binary system in the perovskite type layer compounds (<Emphasis Type="Italic">n</Emphasis>-C<Subscript>n</Subscript>H<Subscript>2n+1</Subscript>NH<Subscript>3</Subscript>)<Subscript>2</Subscript>MnCl<Subscript>4</Subscript>

The thermotropic phase transitions in the perovskite type layer compound (n-C₁₀H₂₁NH₃)₂MnCl₄ and (n-C₁₄H₂₉NH₃)₂MnCl₄ were synthesized and, at the same time, a series of their mixtures C₁₀Mn-C₁₄Mn were prepared. The experimental binary phase diagram of C₁₀Mn-C₁₄Mn was established by differential thermal analysis (DTA), IR and X-ray diffraction. In the phase diagram new material (n-C₁₀H₂₁NH₃)(n-C₁₄H₂₉NH₃)MnCl₄ and two eutectoid invariants were observed, two eutectic points temperatures are about 29.8 and 27.9°C. Contrasting other similar system, there are three noticeable solid solution ranges (α, β, γ) at the left and right boundary and middle of the phase diagram.     

Electron interactions in the (η<Superscript>2</Superscript>-C<Subscript>60</Subscript>)Pd[P(Ph<Subscript>2</Subscript>)C<Subscript>5</Subscript>H<Subscript>4</Subscript>]<Subscript>2</Subscript>Fe complex

The electronic structure of the (η²-C₆₀)Pd[P(Ph₂)C₅H₄]₂Fe complex was calculated by the “hybrid” B3LYP method. Comparison of the experimental X-ray emission C-Kα spectrum and theoretical spectrum of the compound demonstrated that the electron interactions between the C₆₀ core, palladium atom, and organometallic fragment are described correctly in the framework of the quantum chemical method used. The electronic structure of the organometallic fullerene complex can be presented as a set of blocks of orbitals corresponding to different types of chemical bond. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2640–2644, December, 2005.     

Synthesis of Poly(<Emphasis Type="Italic">o</Emphasis>-anisidine)/H<Subscript>2</Subscript>SO<Subscript>4</Subscript> Film for the Development of Glucose Biosensor

The poly(o-anisidine)–sulfuric acid–glucose oxidase (POA–H₂SO₄–GOx) electrode has been investigated in the present work. Platinum electrode was used for the synthesis of poly (o-anisidine)–sulfuric acid (POA–H₂SO₄) film using galvanostatic method with 0.2 M o-anisidine, 1.0 M H₂SO₄ solution, 1.0 pH and 2 mA/cm² applied current density. The synthesized film was characterized using electrochemical technique, conductivity measurement, UV–visible spectroscopy, Fourier transform infrared spectroscopy, and scanning electron microscopy. GO_X was immobilized on synthesized POA–H₂SO₄ film by cross-linking via glutaraldehyde in phosphate and acetate buffer. The Michaelis–Menten constant ( K_\textm￠K_{\text{m}}^\prime ) was determined for the immobilized enzyme. The glucose oxidase electrode shows the maximum current response at pH 5.5 and potential 0.6 V. The sensitivity of POA–H₂SO₄–GO_X electrode in phosphate and acetate buffer has been recorded. The results of this study reveal that the phosphate buffer gives fast response as compared to acetate buffer in amperometric measurements.     

Synthesis,structure, and electric properties of oxygen-deficient perovskites Ba<Subscript>3</Subscript>In<Subscript>2</Subscript>ZrO<Subscript>8</Subscript> and Ba<Subscript>4</Subscript>In<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>11</Subscript>

Perovskite phases Ba₃In₂ZrO₈ and Ba₄In₂Zr₂O₁₁ with the nominal concentration of structural oxygen vacancies 1/9 and 1/12, respectively, were synthesized by solid-phase and solution methods. X-ray diffraction showed cubic symmetry of both phases with the unit cell parameter a = 0.4193(2) and 0.4204(3) nm, respectively. The absence of superstructural lines resulted in the conclusion on statistical arrangement of oxygen vacancies. Thermogravimetry and mass spectrometry proved that both phases can reversibly absorb water from gas phase (pH₂O = 2 × 10⁻² atm) with observed correlation between the concentration of oxygen vacancies and amount of absorbed water. The total water amount was up to 0.9 mol per formula unit or, if recalculated for perovskite unit ABO₃, 0.3 and 0.23 mol H₂O, respectively. The temperature curves of coductivity in the atmosphere with various partial water vapor pressures (pH₂O = 3 × 10⁻⁵ and 2 × 10⁻² atm) showed significantly higher conductivity and lower activation energy (0.52 eV) in humid atmosphere due to proton transfer. The proton conductivity is up to 5 × 10⁻⁴ Ohm⁻¹ cm⁻¹ at 300°C for Ba₃In₂ZrO₈ specimen. IR spectrometry showed that protons in the structure exist primarily in OH-groups.     

Crystal structure of Li(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>[GaEdta]

The ethylenediaminetetraacetate complex Li(H₂O)₃[Ga(Edta)] was synthesized and its crystal structure composed of octahedral (Ga(Edta)⁻ anions connected to the Li(H₂O)₃⁺ ion through the oxygen atom was studied. Five of the six hydrogen atoms of water molecules are involved in weak hydrogen bonds with the oxygen atoms of four Ga(Edta)⁻ complexes, the complex anion is hydrogen-bonded to five water molecules. In addition, shortened contacts C(221)–H(22A)…O(112) between the Ga(Edta)⁻ anions were found. As a result, the molecular packing in the crystal is determined by the three-dimensional lace of hydrogen bonds. The results are compared with published data for the lithium salts of Bi(III), Sb(III), Fe(III), Ni(II), and Hg(II) ethylenediaminetetraacetates.