聚(丙烯酸-co-丙烯酰胺)/蒙脱土/腐殖酸钠复合物对Pb2+的吸附性能

用制备的聚(丙烯酸-co-丙烯酰胺)/蒙脱土/腐殖酸钠复合吸附剂,研究了溶液pH值、吸附时间和Pb2+溶液初始浓度等因素对重金属Pb2+的吸附性能,探讨了复合吸附剂对Pb2+的吸附机理。结果表明,在pH值为6.0、吸附时间2 h、Pb2+溶液初始浓度0.01 mol/L和吸附剂用量0.10 g的条件下,复合吸附剂对Pb2+的吸附量达到364.05 mg/g,平衡所需的时间为15 min。与蒙脱土相比,复合吸附剂具有更高的吸附容量和更快的吸附速率。     

Chitosan-g-poly(acrylic acid) hydrogel with crosslinked polymeric networks for Ni recovery

In this study, chitosan-g-poly(acrylic acid) (CTS-g-PAA) hydrogel with crosslinked polymeric networks was prepared from an aqueous dispersion polymerization and then used as the adsorbent to recover a valuable metal, Ni²⁺. The adsorption capacity of CTS-g-PAA for Ni²⁺ was evaluated and the adsorption kinetics was investigated using Voigt-based model and pseudo-second-order model. In addition, the effects of pH values and coexisting heavy metal ions such as Cu²⁺ and Pb²⁺ on the adsorption capacity were studied. The results indicate that the as-prepared adsorbent has faster adsorption rate and higher adsorption capacity for Ni²⁺ recovery, with the maximum adsorption capacity of 161.80 mg g⁻¹. In a wide pH range of 3–7, the adsorption capacity keeps almost the same, and even under competitive conditions, the adsorption capacity of CTS-g-PAA for Ni²⁺ is observed to be as high as 54.47 mg g⁻¹. Finally, the adsorption performance of CTS-g-PAA for Ni²⁺ in real water sample and the reusability of the as-prepared adsorbent were evaluated, and also the controlled adsorption mechanism was proposed.     

Kinetics and equilibrium adsorption of Cu(II), Cd(II), and Ni(II) ions by chitosan functionalized with 2[-bis-(pyridylmethyl)aminomethyl]-4-methyl-6-formylphenol

Chitosan biopolymer chemically modified with the complexation agent 2[-bis-(pyridylmethyl)aminomethyl]-4-methyl-6-formylphenol (BPMAMF) was employed to study the kinetics and the equilibrium adsorption of Cu(II), Cd(II), and Ni(II) metal ions as functions of the pH solution. The maximum adsorption of Cu(II) was found at pH 6.0, while the Cd(II) and Ni(II) maximum adsorption occurred in acidic media, at pH 2.0 and 3.0, respectively. The kinetics was evaluated utilizing the pseudo-first-order and pseudo-second-order equation models and the equilibrium data were analyzed by Langmuir and Freundlich isotherms models. The adsorption kinetics follows the mechanism of the pseudo-second-order equation for all studied systems and this mechanism suggests that the adsorption rate of metal ions by CHS-BPMAMF depends on the number of ions on the adsorbent surface, as well as on their number at equilibrium. The best interpretation for the equilibrium data was given by the Langmuir isotherm and the maximum adsorption capacities were 109 mg g-1 for Cu(II), 38.5 mg g-1 for Cd(II), and 9.6 mg g-1 for Ni(II). The obtained results show that chitosan modified with BPMAMF ligand presented higher adsorption capacity for Cu(II) in all studied pH ranges.     

Kinetics and equilibrium adsorption study of lead(II) onto activated carbon prepared from coconut shell

Removal of lead from aqueous solutions by adsorption onto coconut-shell carbon was investigated. Batch adsorption experiments were performed to find out the effective lead removal at different metal ion concentrations. Adsorption of Pb2+ ion was strongly affected by pH. The coconut-shell carbon (CSC) exhibited the highest lead adsorption capacity at pH 4.5. Isotherms for the adsorption of lead on CSC were developed and the equilibrium data fitted well to the Langmuir, Freundlich, and Tempkin isotherm models. At pH 4.5, the maximum lead adsorption capacity of CSC estimated with the Langmuir model was 26.50 mg g(-1) adsorbent. Energy of activation (Ea) and thermodynamic parameters such as DeltaG, DeltaH, and DeltaS were evaluated by applying the Arrhenius and van't Hoff equations. The thermodynamics of Pb(II) on CSC indicates the spontaneous and endothermic nature of adsorption. Quantitative desorption of Pb(II) from CSC was found to be 75% which facilitates the sorption of metal by ion exchange.     

Adsorption of Heavy Metal Ions from Aqueous Solutions by Zeolite Based on Oil Shale Ash: Kinetic and Equilibrium Studies

Na-A zeolite was successfully synthesized via the alkaline fusion method with oil shale ash as the raw material. The adsorption capacity of it was tested by removing Cu²⁺, Ni²⁺, Pb²⁺ and Cd²⁺ from aqueous solutions. The results reveal the maximum adsorption capacity of adsorbent for Pb²⁺, Cu²⁺, Cd²⁺ and Ni²⁺ were 224.72, 156.74, 118.34 and 53.02 mg/g, respectively. The effects of contact time and pH value of solutions on the adsorption efficiency of the zeolite were evaluated. Besides, The equilibrium adsorption data and the batch kinetic data were correlated with Langmuir and Freundlich models and the pseudo-first-order and pseudo-second-order models separately. The results show that the Langmuir isotherm and the pseudo-second-order equation were more suitable for the adsorption of Na-A zeolite for the metal ions. In addition, Thermodynamic parameters of the adsorption(the Gibbs free energy, entropy, and enthalpy) were also evaluated and discussed. The results demonstrate that the adsorption process was spontaneous and endothermic under natural conditions and the synthesized zeolite was an effective adsorbent for the removal of metal ions from aqueous solution.     

Removal of cadmium(II) and lead(II) ions from model aqueous solutions using sol–gel-derived inorganic oxide adsorbent

A study was conducted concerning the preparation and application of a novel synthetic oxide adsorbent of MgO-SiO₂ type. The material was prepared via a sol–gel route, utilizing magnesium ethoxide and tetraethoxysilane as precursors of magnesium oxide and silica respectively, and ammonia as a catalyst. The powder was comprehensively analyzed with regard to chemical composition (EDS method), crystalline structure, morphology, characteristic functional groups, electrokinetic stability and porous structure parameters (BET and BJH models). The synthesized oxide adsorbent is amorphous, with irregularly shaped particles, a relatively large surface area of 612 m²/g, and negative surface charge over almost the whole pH range. Comprehensive adsorption studies were performed to investigate the adsorption of Cd(II) and Pb(II) ions on the MgO–SiO₂ oxide adsorbent, including evaluation of adsorption kinetics and isotherms, the effect of pH, contact time and mass of adsorbent. It was shown that irrespective of the conditions of the adsorption process, the synthesized MgO–SiO₂ adsorbent exhibits slightly better affinity to lead(II) than to cadmium(II) ions (sorption capacity of 102.02 mg(Pb²⁺)/g and 94.05 mg(Cd²⁺)/g). The optimal time for removal of the analyzed metal ions was 60 min, although adsorption reached equilibrium within 10 min for Pb(II) and within 15 min for Cd(II) ions, which was found to fit well with a type 1 pseudo-second-order kinetic model. Additionally, adsorption efficiency was affected by the pH of the reaction system—better results were obtained for pH ≥7 irrespective of the type of metal ion.     

Removal of nickel ions by adsorption on nano-bentonite: Equilibrium,kinetics, and thermodynamics

Nano-bentonite was used as an adsorbent to remove nickel ions from aqueous solutions. Experimental investigation was carried out to identify the effect of pH, contact time, initial concentration, and adsorbent dose of Ni(II). Equilibrium data were described by and fitted to Langmuir, Freundlich, and Dubinin–Radushkevich models. Results showed that the optimum conditions for the removal of the Ni(II) are initial concentration 100 mg/L, adsorbent dose 0.5 g, and pH 6. Surface morphology and functionality of nano-bentonite were characterized by SEM and FTIR. The kinetics data were more accurately described by pseudo-second-order model. The intra-particle diffusion model gave multi-linear curves, so more than one step controlled the adsorption process. Nano-bentonite removed nickel with maximum adsorption capacity of 39.06 mg/g (30°C, pH) and thermodynamic data indicated that adsorption reaction is spontaneous and of an endothermic nature.     

Synthesis and Properties of Surface Molecular Imprinting Adsorbent for Removal of Pb<Superscript>2+</Superscript>

A new chitosan imprinting adsorbent using diatomite as core material was prepared by using the surface molecular imprinting technology with the Pb²⁺ as imprinted ion. The preparation process conditions of the surface molecular imprinting adsorbent were studied. The adsorbent was characterized by using Fourier transform infrared (FTIR) spectrum. FTIR spectrum indicated that it was cross-linked by epichlorohydrin. The new imprinting adsorbent could provide a higher adsorption capacity for Pb²⁺, which reached 139.6 mg/g increasing 32.3% compared with cross-linking chitosan adsorbent (the initial Pb²⁺ concentration of 600 mg/L). The adsorption velocity was quick and the equilibration time of the imprinting adsorbent for Pb²⁺ was 3 h that shortened about 40% compared with cross-linking chitosan adsorbent. It had a more wide pH range of 5–7 than that of cross-linking chitosan adsorbent. The new imprinting adsorbent can be reused for up to ten cycles without loss of adsorption capacity. In the kinetics and isotherm study, the pseudosecond order model and Langmuir model could represent the adsorption process.     

Removal of copper(II) from aqueous solution with rape stalk modified by citric acid

In this paper, rape stalk was modified with citric acid (CA) to prepare copper ion biosorbent. The modified rape stalk (MRS) was characterized by Fourier transforms infrared (FTIR), zeta potential, and thermogravimetric analysis (TGA). The effects of various parameters like initial Cu²⁺ concentration, contact time, initial pH, and temperature on adsorption capacity were studied. The adsorption capacity of MRS at 298 K was 69.84 mg/g, far higher than 18.24 mg/g for native rape stalk (NRS). The adsorption mechanism was also evaluated in terms of kinetics and thermodynamics. The adsorption equilibrium data was well described by the Langmuir isotherm model. The adsorption process followed the pseudo-second-order rate kinetics. Thermodynamic study showed spontaneous and endothermic nature of the adsorption process. The ion exchange of the adsorption mechanism was affirmed. MRS could be a potentially low-cost and green adsorbent for removal of Cu²⁺ from aqueous solution.     

Efficient Removal of Pb(II) from Aqueous Medium Using Chemically Modified Silica Monolith

The adsorptive removal of lead (II) from aqueous medium was carried out by chemically modified silica monolith particles. Porous silica monolith particles were prepared by the sol-gel method and their surface modification was carried out using trimethoxy silyl propyl urea (TSPU) to prepare inorganic–organic hybrid adsorbent. The resultant adsorbent was evaluated for the removal of lead (Pb) from aqueous medium. The effect of pH, adsorbent dose, metal ion concentration and adsorption time was determined. It was found that the optimum conditions for adsorption of lead (Pb) were pH 5, adsorbent dose of 0.4 g/L, Pb(II) ions concentration of 500 mg/L and adsorption time of 1 h. The adsorbent chemically modified SM was characterized by scanning electron microscopy (SEM), BET/BJH and thermo gravimetric analysis (TGA). The percent adsorption of Pb(II) onto chemically modified silica monolith particles was 98%. An isotherm study showed that the adsorption data of Pb(II) onto chemically modified SM was fully fitted with the Freundlich and Langmuir isotherm models. It was found from kinetic study that the adsorption of Pb(II) followed a pseudo second-order model. Moreover, thermodynamic study suggests that the adsorption of Pb(II) is spontaneous and exothermic. The adsorption capacity of chemically modified SM for Pb(II) ions was 792 mg/g which is quite high as compared to the traditional adsorbents. The adsorbent chemically modified SM was regenerated, used again three times for the adsorption of Pb(II) ions and it was found that the adsorption capacity of the regenerated adsorbent was only dropped by 7%. Due to high adsorption capacity chemically modified silica monolith particles could be used as an effective adsorbent for the removal of heavy metals from wastewater.     

介孔碳-镍复合物对甲基橙的吸附性能研究

以三嵌段共聚物(F127)作为表面活性剂,低分子量酚醛树脂和六水合硝酸镍分别作为碳源和镍源,利用挥发诱导自组装方法制备了有序介孔碳-镍纳米复合物;采用X射线衍射仪和透射电子显微镜分析了复合物的相组成和微结构;测定了样品的氮气吸脱附特性和对甲基橙的吸附性能,采用二级动力学方程和吸附等温线对吸附结果进行了拟合.结果表明,镍纳米微粒的平均粒径约为20nm;当纳米镍的负载量为2%时,复合物样品具有很高的Brunauer-Emmett-Teller(BET)比表面积(1 610m2/g)和较大的孔容(1.29cm3/g).与此同时,复合物样品的氮气吸脱附特性与二级动力学方程拟合结果具有很好的相关性,吸附量高达324mg/g;吸附等温线拟合结果表明,样品对甲基橙的吸附过程为单分子层吸附,与Langmuir吸附等温式的相关性良好.     

接枝亲水型高分子的丝瓜络对水中重金属离子的吸附行为

采用接枝聚合的方法将亲水性聚丙烯酰胺接枝到丝瓜络上,部分水解的聚丙烯酰胺的接枝率可高达161.3%.选择典型的Cu~(2+)和Pb~(2+)体系,研究亲水型丝瓜络对水中重金属离子的吸附行为.结果表明,在单离子体系中,准二级动力学方程适于描述亲水型丝瓜络吸附动力学过程,饱和吸附量随着接枝率和pH值增加而增大,对Cu~(2+)和Pb~(2+)的最大饱和吸附量分别为647和887 mg/g.Langmuir和Freundlich等温吸附模型都适合描述等温吸附过程.8次吸附-解吸附循环实验表明,饱和吸附量基本保持恒定,同时对吸附机理进行了讨论.     

Synthesis of Novel Poly[2-(dimethylamino) ethyl methacrylate]/Pumice Stone Hydrogel Composite for the Rapid Adsorption of Humic Acid in Aqueous Solution

In this study, a novel hydrogel composite, poly[2-(dimethylamino) ethyl methacrylate]/pumice (PDMAEMA/Pmc) was designed and its sorption behavior for humic acid (HA) was produced by using batch adsorption techniques. FTIR results showed that pumice was well incorporated with the PDMAEMA matrix. A scanning electron microscopy (SEM) was used in order to determine the morphology of composite hydrogel. In the batch experiments, the adsorption capacity was evaluated depending on different variables such as ionic strength; initial HA concentration; pH and adsorbent dosage. The adsorption capacity was found to be 86.27 mg/g under the optimized conditions. The results revealed that HA adsorption onto PDMAEMA/Pmc was well expressed by the Freundlich isotherm model and the adsorption process was followed by the pseudo second order kinetic model. The reusability tests also indicated that novel PDMAEMA/Pmc adsorbent was an efficient and cost-effective adsorbent for removal of HA.     

Preparation of a novel chelating resin for the removal of Ni2+ from water

A new chelating resin DVB-MA-HDA modified with hydroxamic acid groups was prepared for the fast removal of Ni2＋ from water. SEM, BET, elemental analysis, FT-IR spectroscopy and XPS were used to characterize this new adsorbent. Batch adsorption experiment indicated that the equilibrium adsorption capacity of DVB-MA-HD for Ni2＋ was more than 130mg/g, and the adsorption isotherm can be well fitted by the Langmuir model. The adsorption kinetic curve indicates that more than 60% of the adsorption amount of Ni2＋ at equilibrium occurred within the initial 20 rain. 0.1 mol/L EDTA solution could desorb Ni2＋ from DVB-MA-HDA effectively.     

Removal of Cd(II), Cu(II), and Pb(II) by adsorption onto natural clay: a kinetic and thermodynamic study

In this work, we study the elimination of three bivalent metal ions (Cd²⁺, Cu²⁺, and Pb²⁺) by adsorption onto natural illitic clay (AM) collected from Marrakech region in Morocco. The characterization of the adsorbent was carried out by X-ray fluorescence, Fourier transform infrared spectroscopy and X-ray diffraction. The influence of physicochemical parameters on the clay adsorption capacity for ions Cd²⁺, Cu²⁺, and Pb²⁺, namely the adsorbent dose, the contact time, the initial pH imposed on the aqueous solution, the initial concentration of the metal solution and the temperature, was studied. The adsorption process is evaluated by different kinetic models such as the pseudo-first-order, pseudo-second-order, and Elovich. The adsorption mechanism was determined by the use of adsorption isotherms such as Langmuir, Freundlich, and Temkin models. Experiments have shown that heavy metals adsorption kinetics onto clay follows the same order, the pseudo-second order. The isotherms of adsorption of metal cations by AM clay are satisfactorily described by the Langmuir model and the maximum adsorption capacities obtained from the natural clay, using the Langmuir isotherm model equation, are 5.25, 13.41, and 15.90 mg/g, respectively for Cd(II), Cu(II), and Pb(II) ions. Adsorption of heavy metals on clay is a spontaneous and endothermic process characterized by a disorder of the medium. The values of ΔH are greater than 40 kJ/mol, which means that the interactions between clay and heavy metals are chemical in nature.     

啤酒酵母废菌体吸附Pd2+的物理化学特性

以啤酒酿造厂的啤酒酵母废菌体为生物吸附剂,研究死的啤酒酵母菌体从PdCl₂溶液中吸附Pd²⁺的物理化学特性.结果表明,该菌体吸附Pd²⁺受吸附时间、溶液pH值、菌体浓度和Pd²⁺起始浓度等因素的影响.菌体吸附Pd²⁺是个快速的过程,吸附45min时吸附量达最大,但在最初的3min内,吸附量可达到最大吸附量的92%.在5～60℃范围内,吸附作用不受温度影响.吸附作用的最适pH值为3.5.在Pd²⁺起始质量浓度为30～300mg/L范围内和菌体质量浓度为2g/L的条件下,菌体对Pd²⁺的吸附作用符合Langmuir和Freundlich等温吸附模型.在pH=3.5,Pd²⁺与菌体质量比为0.2和30℃条件下吸附60min,吸附量达94.5mg/g.从废钯催化剂处理液回收钯,吸附量为32.2mg/g.XPS分析表明,该菌体能吸附水溶液中的Pd²⁺.TEM结果表明,在无外加电子供体时,死的啤酒酵母废菌体能够吸附和还原溶液中的Pd²⁺成Pd⁰微粒,Pd⁰微粒可进一步形成有一定形状的钯晶粒;该菌体还能使吸附在γ-Al₂O₃上的Pd²⁺还原成Pd⁰.     

水杨酸型螯合吸附材料对重金属离子的吸附性能

将5-氨基水杨酸接枝到PGMA/SiO2微粒的聚甲基丙烯酸缩水甘油酯(PGMA)大分子链上,成功制备了一种新型螯合吸附材料ASA-PGMA/SiO2。采用静态法研究了ASA-PGMA/SiO2对重金属离子Cu2+、Cd2+、Zn2+、Pb2+的吸附性能,结果表明其对Cu2+、Cd2+、Zn2+、Pb2+具有很强的螯合吸附能力,吸附容量分别可以达到0.42、0.40、0.35、0.31mmol/g。体系的pH对吸附容量影响较大,吸附行为服从Langmuir和Freundlich吸附模型。使用0.1mol/L的盐酸溶液就可实现重金属离子的解吸。通过反复吸附-解吸实验证明ASA-PGMA/SiO2具有良好的重复使用性能。     

亚铁氰化铜-聚丙烯酰胺/羧甲基纤维素/石墨烯复合水凝胶的制备及铷吸附性能

铷是一种稀贵的碱金属,具有很高的经济价值和广阔应用前景,从卤水中有效提取铷具有重要意义。通过热引发聚合法合成水凝胶基质（聚丙烯酰胺/羧甲基纤维素/氧化石墨烯水凝胶,PCG）固定亚铁氰化铜（KCuFC）,制备了一种新型的铷（Rb⁺）吸附剂（KCuFC-PCG）。采用物理化学方法对KCuFC-PCG的结构和性质进行了表征。通过批量吸附实验,研究了pH值、吸附时间、Rb⁺初始质量浓度、温度和竞争离子对吸附的影响。结果表明,KCuFC-PCG吸附剂在pH值（5～9）范围内表现出良好的吸附能力,pH=8时表现最佳;在Rb⁺质量浓度为5 mg/L,pH=8,吸附6 h达到吸附平衡,KCuFC-PCG的对Rb⁺的吸附量为89.12 mg/g;动力学行为可用准二级动力学模型来描述,表明化学吸附为速率控制步骤;吸附过程符合Langmuir等温吸附模型,为单分子层吸附,最大吸附量为258.4 mg/g。以0.2 mol/L NH₄Cl作为解吸剂,解吸3 h,解吸率为77%。     

The starch modified montmorillonite for the removal of Pb(II), Cd(II) and Ni(II) ions from aqueous solutions

In the present study, we attempted to synthesize a novel sorbent from the starch modified montmorillonite for the removal of Pb(II), Cd(II), and Ni(II) ions from aqueous solutions. Structure and properties of the adsorbent were characterized by Fourier-transformed infrared(FT-IR) spectroscopy, X-ray diffraction (XRD), and Field emission scanning electron microscopic (FE-SEM) techniques. Batch experiments were confirmed through the effect of different conditions including pH, contact time, initial metal concentration and adsorbent dose. Specifically, the optimum value of adsorbent dose was achieved as 20 g/l for the removal of almost metal ions. The adsorption data was fitted with the optimum pH value as 5 for all experiments. The contact time at which the uptake of maximum metal adsorption was observed within 45 min for Pb(II), 90 min for Cd(II), and 60 min for Ni(II). In addition, it was revealed in our study that the equilibrium data obeyed the Langmuir model, and the adsorption kinetic followed a pseudo second-order rate model. Obtained results were noticeable for a modified phyllosilicate adsorbent, and with such a simple and low-cost modification for montmorillonite, the potential of this material as an economical and effective adsorbent for the removal of metal ions from aqueous solution was considerably elevated.     

水杨酸型螯合树脂对Fe(III)离子的螯合吸附行为

以5-氨基水杨酸(ASA)为胺化试剂, 使氯甲基化的交联聚苯乙烯(CMCPS)微球表面的苄氯基团发生亲核取代反应, 制得了水杨酸型螯合树脂ASA-CPS. 研究了该螯合树脂对金属离子的螯合吸附行为, 探讨了其吸附热力学与吸附机理, 考察了介质pH值对树脂螯合吸附性能的影响以及树脂对不同金属离子的螯合吸附能力. 实验结果表明, 水杨酸型螯合树脂ASA-CPS 对重金属离子具有强螯合吸附性能, 尤其对Fe3+离子表现出很强的螯合吸附能力, 常温下吸附容量可达21 g/100 g. 吸附过程属熵驱动的化学吸附过程, 升高温度, 吸附容量增高; 在可抑制金属离子水解的pH范围内, 介质的pH值越高, 螯合吸附能力越强; 对于性质不同的金属离子, ASA-CPS的吸附性能是有差别的, 吸附容量的顺序为Fe3+>Ni2+>Cu2+>Zn2+.