Coverage effects on the adsorption of sulfur on Co(0 0 0 1): A DFT study

The adsorption of sulfur on Co(0 0 0 1) was studied using density functional theory calculations at coverage from 0.11 ML to 1.0 ML. Calculated results indicate that atomic S favors in hollow sites with bond S–Co dominated at lower coverage and at higher coverage the strong adsorbate S–S interaction leads to the formation of S₂ species. It was shown that the adsorption energy generally increases (gets weaker) with the coverage in a near linear fashion for the most stable configurations. In addition, modification of the surface electronic properties has been discussed and some discrepancy are found between our calculations and the findings of O adsorption on Au(1 1 1) and Pt(1 1 1) surfaces.     

Density functional calculations for Ni adsorption on Al(1 1 0)

The adsorption of 0.25, 0.5 and 1 monolayer (ML) of the transition metal Ni on the metal substrate Al(1 1 0) was studied using first-principles calculations at the level of density functional theory. The metal–metal system was analyzed with the generalized gradient approximation. Four stable atomic configurations were considered, and the optimized geometries and adsorption energies of different Ni adsorption sites on the Al(1 1 0) surface at selected levels of coverage were calculated and compared. The four-fold hollow site was determined to be the most stable adsorption site with adsorption energy of 5.101 eV at 0.25 ML, 3.874 eV at 0.5 ML and 3.665 eV at 1 ML. The adsorption energies of the four sites slightly decreased as the Ni coverage increased. Work function analysis showed that when Ni is adsorbed on the Al(1 1 0) surface, the work function decreased as the coverage increased due to depolarization. The Mulliken population and density of states were calculated to determine the charge distribution of the adsorption site, confirming that a chemisorption interaction exists between the adsorbed Ni atom and Al(1 1 0) surface atoms.     

Adsorption of molecular SiO2 on a clean Si(1 0 0) surface

We have investigated the adsorption of molecular (gaseous) SiO₂ on a clean Si(1 0 0) p(2 × 2) reconstructed surface using density functional theory based methods. The SiO₂ molecule is found to be chemisorbed on various sites on the Si surface and the most energetically favourable structure is on top of the dimers. The minimum energy pathways for the various adsorption channels indicate that the reaction is barrierless in all cases. The corresponding vibrational spectrum is also calculated and the adsorbed molecules are, as expected, found to have red-shifted vibrational frequencies. The energetically favourable adsorption sites and adsorption energies are comparable to the results found for SiO.     

Observation of hydrogen adsorption on 6H-SiC(0 0 0 1) surface

We have used coaxial impact-collision ion scattering spectroscopy (CAICISS) and time-of-flight elastic recoil detection analysis (TOF-ERDA) to investigate the adsorption of atomic hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface. It has been found that the saturation coverage of hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface is about 1.7 ML. Upon saturated adsorption of atomic hydrogen, the √3×√3 surface structure changes to the 1×1 structure. The data of the CAICISS measurements have indicated that as a result of the hydrogen adsorption, Si adatoms on the √3×√3 surface move from T₄ to on-top sites.     

First-principles study of small palladium clusters on NiAl(1 1 0) alloy surface

Theoretical calculations focused on the geometry, stability, electronic and magnetic properties of small palladium clusters Pd_n (n=1–5) adsorbed on the NiAl(1 1 0) alloy surface were carried out within the framework of density functional theory (DFT). In agreement with the experimental observations, both Ni-bridge and Al-bridge sites are preferential for the adsorption of single palladium atom, with an adsorption energy difference of 0.04 eV. Among the possible structures considered for Pd_n (n=1–5) clusters adsorbed on NiAl(1 1 0) surface, Pd atoms tend to form one-dimensional (1D) chain structure at low coverage (from Pd₁ to Pd₃) and two-dimensional (2D) structures are more stable than three-dimensional (3D) structures for Pd₄ and Pd₅. Furthermore, metal-substrate bonding prevails over metal–metal bonding for Pd cluster adsorbed on NiAl(1 1 0) surface. The density of states for Pd atoms of Pd/NiAl(1 1 0) system are strongly affected by their chemical environment. The magnetic feature emerged upon the adsorption of Pd clusters on NiAl(1 1 0) surface was due to the charge transfer between Pd atoms and the substrate. These findings may shade light on the understanding of the growth of Pd metal clusters on alloy surface and the construction of nanoscale devices.     

Sulphur adsorption on Au{1 1 0}: DFT and LEED study

The adsorption of sulphur on clean reconstructed Au{1 1 0}-(1 × 2) surface was studied using density functional theory (DFT) and quantitative low energy electron diffraction (LEED) calculations. The results show that the sulphur atoms form a (4 × 2) ordered structure which preserves the missing row reconstruction of the clean surface. The sulphur atom is found to adsorb on threefold hollow sites, on the {1 1 1} microfacets that border the trenches of the missing rows.     

Entropy-driven adsorption of carbon nanotubes on (0 0 1) and (1 1 1) surfaces of CeO2 islands grown on sapphire substrate

According to the aim to compose combinatorial material by adsorption of carbon nanotubes onto the structured CeO₂ surface the interaction of the armchair (5,5) and zigzag (8,0) nanotubes with the (0 0 1) and (1 1 1) surfaces of CeO₂ islands have been investigated by theoretical methods. The thermodynamics of the adsorption were studied at the low surface coverage region. The interaction energy between the nanotube and the different CeO₂ surfaces shows significant increase when the size of the interface reaches 7–8 unit cells of CeO₂ and it remains unchanged in the larger interface region. However, the entropy term of the adsorption is significantly high when the distances of CeO₂ islands are equal to 27 nm (adsorption of armchair (5,5) nanotube) or 32 nm (adsorption of zigzag (8,0) nanotube). This property supports adsorption of nanotubes onto CeO₂ surfaces which possesses a very specific surface morphology. A long-wave vibration of nanotubes was identified as background of this unexpected phenomenon. This observation could be applicable in the development of such procedures where the nanotube adsorption parallel to the surface is aimed to perform.     

Interaction of atomic H and CO with Cu(1 1 0) and bimetallic Ni/Cu(1 1 0)

Co-adsorption of hydrogen and CO on Cu(1 1 0) and on a bimetallic Ni/Cu(1 1 0) surface was studied by thermal desorption spectroscopy. Hydrogen was exposed in atomic form as generated in a hot tungsten tube. The Ni/Cu surface alloy was prepared by physical vapor deposition of nickel. It turned out that extended exposure of atomic hydrogen leads not only to adsorption at surface and sub-surface sites, but also to a roughening of the Cu(1 1 0) surface, which results in a decrease of the desorption temperature for surface hydrogen. Exposure of a CO saturated Cu(1 1 0) surface to atomic H leads to a removal of the more strongly bonded on-top CO (α₁ peak) only, whereas the more weakly adsorbed CO molecules in the pseudo threefold hollow sites (α₂ peak) are hardly influenced. No reaction between CO and H could be observed. The modification of the Cu(1 1 0) surface with Ni has a strong influence on CO adsorption, leading to three new, distinct desorption peaks, but has little influence on hydrogen desorption. Co-adsorption of H and CO on the Ni/Cu(1 1 0) bimetallic surface leads to desorption of CO and H₂ in the same temperature regime, but again no reaction between the two species is observed.     

Density functional theory study of the adsorption of methanthiol on Au(1 1 1): Role of gold adatoms

By performing density functional theory calculations, this work clarifies the sites and energetics of both the non-dissociative and dissociated adsorptions of CH₃SH on clean Au(1 1 1) and Au(1 1 1) with intrinsic defects. It was found that the adsorption on defect-free Au(1 1 1) is most stable for non-dissociative CH₃SH. Its direct molecular dissociation to form CH₃S/Au and H/Au is barred by an activation barrier of 0.9 eV. However, the presence of neighboring Au_ad can assist the dissociation reaction to form CH₃S–Au_ad–H by lowering the energy barrier to 0.6 eV. As for the dissociated CH₃S, the surface geometry of two CH₃S joined by a Au_ad is the most favorable one.     

Preparation and characterization of Fe3O4(1 1 1) nanoparticles and thin films on Au(1 1 1)

Fe₃O₄ nanoparticles and thin films were prepared on the Au(1 1 1) surface and characterized using X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM). Fe₃O₄ was formed by annealing α-Fe₂O₃(0 0 0 1) structures on Au(1 1 1) at 750 K in ultrahigh vacuum (UHV) for 60 min. Transformation of the α-Fe₂O₃(0 0 0 1) structures into Fe₃O₄ nanoparticles and thin films was supported by XPS. STM images show that during the growth procedure used, Fe₃O₄ initially appears as nanoparticles at low coverages, and forms thin films at ～2 monolayer equivalents (MLE) of iron. Two types of ordered superstructures were observed on the Fe₃O₄ particles with periodicities of ～50 and ～42 Å, respectively. As the Fe₃O₄ particles form more continuous films, the ～50 Å feature was the predominant superstructure observed. The Fe₃O₄ structures at all coverages show a hexagonal unit cell with a ～3 Å periodicity in the atomically resolved STM images.     

An investigation of the effect of pre-dosed O atoms on the adsorption of NO on Pt{2 1 1}

Reflection absorption infrared spectroscopy (RAIRS) and temperature programmed desorption (TPD) have been used to investigate the effect of pre-dosed O atoms on the adsorption of NO on Pt{2 1 1} at room temperature. RAIRS experiments show that no new species are formed when NO is adsorbed onto a Pt{2 1 1} surface that has been pre-dosed with oxygen and no species are lost from the spectra, compared to spectra recorded for NO adsorption on the clean Pt{2 1 1} surface. However pre-dosed oxygen atoms do influence the frequency and intensity of several of the observed infrared bands. In stark contrast, pre-dosed O has a large effect on the TPD spectra. In particular N₂ and N₂O desorption, seen following NO adsorption on the clean Pt{2 1 1} surface, is completely inhibited. This effect has been assigned to the blocking of NO dissociation by the pre-adsorbed O atoms. A new NO desorption peak, not seen for NO adsorption on the clean Pt{2 1 1} surface, is also observed in TPD spectra recorded following NO adsorption on an oxygen pre-dosed Pt{2 1 1} surface.     

Adsorption of Xe atoms on the TiO2(1 1 0) surface: A density functional study

The interaction of xenon atoms with the TiO₂(1 1 0) surface of rutile has been studied by density functional theory methods. Five different possible adsorption sites on the relaxed and clean TiO₂(1 1 0) surface and on two different type of oxygen vacancies possible on this oxide substrate have been considered. In the case of the defect-free substrate, and when compared with a previous study concerning the adsorption of Ar atoms also on TiO₂(1 1 0), the xenon atom, as a larger and easier polarizable species, is shown to have a deeper physisorption well, as expected. Likewise, Xe atoms prefer to be bounded to positions nearby the outermost titanium atoms as found previously for Ar. This is in agreement with most studies concerning rare gases adsorbed on transition metal surfaces. In the case of the reduced surfaces, it is found that the interaction is more favourable in the protruding rows. The interaction is dominated by dispersion forces and DFT + dispersion energies are 3.5–5 times larger than the non-corrected DFT values and Xe-surface distances are smaller. Finally, an interesting correlation is obtained for the calculated interaction energies and the Xe–Ti distance.     

Metastable helium atom scattering from Ni(1 1 0) surface

The survival probability (SP) of metastable helium atoms (He¹) during scattering from the clean, alkalated and oxygen-adsorbed Ni(1 1 0) surfaces has been examined in the kinetic energy range of 50–400 meV. The measurements were carried out using a time-of-flight technique and a pulsed-discharge type metastable helium atom source. The SP is nearly constant for a kinetic energy (E_kin) of 50–100 meV and decreases exponentially with the increase in E_kin at 100–400 meV. It has been shown that the SP at E_kin=100–400 meV depends on the repulsive part of the He¹-surface interaction potential.     

Computational study of the adsorption of dimethyl methylphosphonate (DMMP) on the (0 1 0) surface of anatase TiO2 with and without faceting

The adsorption of dimethyl methylphosphonate (DMMP) on the (0 1 0) surface of anatase TiO₂, which is isostructural with the (1 0 0), has been studied using density functional theory and two-dimensionally-periodic slab models. The experimentally-observed faceting of this surface has, for the first time, been included in the modeling. The relaxations of bare surfaces both with and without faceting are similar, leading to an atomic-scale roughening due to inward (outward) displacement of fivefold-coordinated Ti_5c (sixfold-coordinated T_6c) atoms together with outward displacement of threefold-coordinated O_3c atoms. Molecular adsorption occurs by formation of a Ti_5c?OP dative bond with one or more CH?O_2c bonds between CH₃ groups and unsaturated, twofold-coordinated (O_2c) sites. The energies for molecular adsorption, obtained using the B3LYP functional, are virtually identical (about ?21.0 kcal/mol) for the two surfaces and are also close to those found elsewhere for the rutile (1 1 0) and anatase (1 0 1) surfaces. A possible first step in the dissociative adsorption of DMMP has also been modeled and is found to be thermodynamically favored over molecular adsorption to a degree which depends on faceting.     

Oxygen adsorption and surface segregation in (2 1 1) surfaces of Pt(shell)/M(core) and Pt3M (M = Co,Ir) alloys

Density functional theory is used to study oxygen adsorption and its effect on surface segregation in (2 1 1) surfaces of Pt(shell)/M(core) and Pt₃M (M = Co, Ir) alloys. It is found that the most energetically favorable oxygen adsorption site is the bridge site over and parallel to the (1 0 0) step. Surface segregation phenomena is observed in Pt₃Co, Pt₃Ir and Pt/Co(core) systems. The Pt/Ir(core) structure was the only one, among the studied systems, that showed antisegregation behavior even in presence of oxygen adsorbed.     

Oxygen adatoms at SrTiO3(0 0 1): A density-functional theory study

We present a density-functional theory study addressing the energetics and electronic structure properties of isolated oxygen adatoms at the SrTiO₃(0 0 1) surface. Together with a surface lattice oxygen atom, the adsorbate is found to form a peroxide-type molecular species. This gives rise to a non-trivial topology of the potential energy surface for lateral adatom motion, with the most stable adsorption site not corresponding to the one expected from a continuation of the perovskite lattice. With computed modest diffusion barriers below 1 eV, it is rather the overall too weak binding at both regular SrTiO₃(0 0 1) terminations that could be a critical factor for oxide film growth applications.     

Edge and terrace structure of CoTPP on Au(1 1 1) investigated by ultra-high vacuum scanning tunnelling microscopy at room temperature

Edge adsorption and terrace molecular domain structures of Cobalt(II) tetraphenylporphyrin (CoTPP) on Au(1 1 1) were investigated using STM at room temperature. Two different terrace domain structures were observed. These two arrangements were found to be enantiomorphous arrangements of the molecular assemblies, where the molecular rows rotate ±16° with respect to the [1 2 1] direction of Au(1 1 1). In both arrangements, most of the CoTPP molecules were imaged as one bright dot with four legs, corresponding to a planar conformation of the macrocycle. A small proportion of the CoTPP molecules appear as two bright dots, corresponding to a saddle shape of the macrocycle. Our results show that most of the saddle-deformed CoTPP molecules are distributed in the vicinity of the bridging sites of the reconstructed gold surface. Besides terrace domains, we found that several edge adsorption structures of CoTPP are also stable enough to be imaged and analysed in detail. Furthermore, the relationship between edge structures and terrace domains was revealed.     

Self-assembly of C60 fullerenes on quasi-one-dimensional Si(111)4 × 1-In surface

Using scanning tunneling microscopy observations, self-assembly of C₆₀ fullerenes in the course of room-temperature adsorption onto Si(111)4 × 1-In reconstruction and after subsequent annealing at temperatures ranging from 150 to 450 °C has been studied. Adsorbed C₆₀ fullerenes have been found to occupy off-centered positions on In-atom rows forming linear chains with a maximal length of eight C₆₀ molecules. Intermolecular spacing within the regular chains equals three lattice constants of Si(111) surface. Two energetically different adsorption states of C₆₀ have been detected, one of which is occupied preferentially at room temperature, while occupation of the second (more tight) state dominates at temperature above ~ 150 °C. In the first state, C₆₀ fullerene resides plausibly in a continuous rotation, while in the second state a C₆₀ molecule is fixed tightly in a single orientation with a C₆₀ hexagon pointing upward. Transition of C₆₀ fullerenes to the more stable state is accompanied by expelling In atoms from the Si(111)4 × 1-In reconstruction.     

DFT calculations of adenine adsorption on coin metal (1 1 0) surfaces

Density functional theory is used to analyze in detail the adsorption of the adenine molecule on the (1 1 0) surfaces of Cu, Ag, and Au. While the adsorption configurations are similar in all three cases – the molecule bonds via two nitrogen atoms to the substrate – the details like charge transfer or local strain a rather different. The molecule–substrate interaction in case of Cu is stronger than for the more noble metals Ag and Au. Longe-range dispersion forces stabilize the adsorption configuration in dependence on the specific adsorption geometry. In case of Ag and Au, relativistic effects are found to be important.     

Hydrogen adsorption on palladium and palladium hydride at 1 bar

The dissociative sticking probability for H₂ on Pd films supported on sputtered Highly Ordered Pyrolytic Graphite (HOPG) has been derived from measurements of the rate of the H–D exchange reaction at 1 bar. The sticking probability for H₂, S, is higher on Pd hydride than on Pd (a factor of 1.4 at 140 °C), but the apparent desorption energy derived from S is the same on Pd and Pd hydride within the uncertainty of the experiment. Density Functional Theory (DFT) calculations for the (1 1 1) surfaces of Pd and Pd hydride show that, at a surface H coverage of a full mono layer, H binds less strongly to Pd hydride than to Pd. The activation barrier for desorption at a H coverage of one mono layer is slightly lower on Pd hydride, whereas the activation energy for adsorption is similar on Pd and Pd hydride. It is concluded that the higher sticking probability on Pd hydride is most likely caused by a slightly lower equilibrium coverage of H, which is a consequence of the lower heat of adsorption for H on Pd hydride.