Metallization of Ge(0 0 1)-p(2 × 1) surface as result of thermal fluctuations

We present a theoretical study of the metallization of Ge(0 0 1)-p(2 × 1) surface which is observed in experimental data. We have considered the connection between thermal fluctuation of this surface structure and its metallic properties. To this end we have performed long-time MD-DFT simulations. The obtained results show that thermal fluctuation of the Ge(0 0 1)-p(2 × 1) structure may cause its metallization which in not necessary connected with a flip-flop motion of dimer atoms. It was shown that the metallization of the Ge(0 0 1)-p(2 × 1) surface takes place when the dimer buckling angle is reduced to around 11°. In the case of our simulations the considered surface system remained in the metallic state for 25% of the simulation time. We have also found that the metallic state of the fluctuating Ge(0 0 1)-p(2 × 1) surface is built up by dangling bonds of the dimer atoms shifted up (D_up) and down (D_down).     

Reactivity of the Cu2O(1 0 0) surface: Insights from first principles calculations

We present a summary of results of systematic first principles calculations of the electronic and geometric structures of the Cu₂O(1 0 0) surface and the process of CO oxidation on this surface (energetics and pathways of adsorption, diffusion and reactions of CO and O₂ on the surface). The (p, T) phase diagram of the Cu₂O(1 0 0) in equilibrium of with gas phase O₂ built using the ab initio thermodynamics approach suggests that the O-terminated surface is preferred over the Cu-terminated one within the entire ranges of pressures and temperatures in which the compound exists. Metastable Cu-terminated Cu₂O(1 0 0) is found to undergo a surface reconstruction in agreement with experiment. We find CO to oxidize spontaneously on the O-terminated Cu₂O(1 0 0) surface by consuming surface O atoms. Our calculations also show that the surface O-vacancies left in the course of the CO oxidation can be easily filled with dissociative adsorption of the gas phase O₂ molecules, which are usually present in reaction environment.     

Interaction of atomic H and CO with Cu(1 1 0) and bimetallic Ni/Cu(1 1 0)

Co-adsorption of hydrogen and CO on Cu(1 1 0) and on a bimetallic Ni/Cu(1 1 0) surface was studied by thermal desorption spectroscopy. Hydrogen was exposed in atomic form as generated in a hot tungsten tube. The Ni/Cu surface alloy was prepared by physical vapor deposition of nickel. It turned out that extended exposure of atomic hydrogen leads not only to adsorption at surface and sub-surface sites, but also to a roughening of the Cu(1 1 0) surface, which results in a decrease of the desorption temperature for surface hydrogen. Exposure of a CO saturated Cu(1 1 0) surface to atomic H leads to a removal of the more strongly bonded on-top CO (α₁ peak) only, whereas the more weakly adsorbed CO molecules in the pseudo threefold hollow sites (α₂ peak) are hardly influenced. No reaction between CO and H could be observed. The modification of the Cu(1 1 0) surface with Ni has a strong influence on CO adsorption, leading to three new, distinct desorption peaks, but has little influence on hydrogen desorption. Co-adsorption of H and CO on the Ni/Cu(1 1 0) bimetallic surface leads to desorption of CO and H₂ in the same temperature regime, but again no reaction between the two species is observed.     

Observation of hydrogen adsorption on 6H-SiC(0 0 0 1) surface

We have used coaxial impact-collision ion scattering spectroscopy (CAICISS) and time-of-flight elastic recoil detection analysis (TOF-ERDA) to investigate the adsorption of atomic hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface. It has been found that the saturation coverage of hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface is about 1.7 ML. Upon saturated adsorption of atomic hydrogen, the √3×√3 surface structure changes to the 1×1 structure. The data of the CAICISS measurements have indicated that as a result of the hydrogen adsorption, Si adatoms on the √3×√3 surface move from T₄ to on-top sites.     

First-principles study of small palladium clusters on NiAl(1 1 0) alloy surface

Theoretical calculations focused on the geometry, stability, electronic and magnetic properties of small palladium clusters Pd_n (n=1–5) adsorbed on the NiAl(1 1 0) alloy surface were carried out within the framework of density functional theory (DFT). In agreement with the experimental observations, both Ni-bridge and Al-bridge sites are preferential for the adsorption of single palladium atom, with an adsorption energy difference of 0.04 eV. Among the possible structures considered for Pd_n (n=1–5) clusters adsorbed on NiAl(1 1 0) surface, Pd atoms tend to form one-dimensional (1D) chain structure at low coverage (from Pd₁ to Pd₃) and two-dimensional (2D) structures are more stable than three-dimensional (3D) structures for Pd₄ and Pd₅. Furthermore, metal-substrate bonding prevails over metal–metal bonding for Pd cluster adsorbed on NiAl(1 1 0) surface. The density of states for Pd atoms of Pd/NiAl(1 1 0) system are strongly affected by their chemical environment. The magnetic feature emerged upon the adsorption of Pd clusters on NiAl(1 1 0) surface was due to the charge transfer between Pd atoms and the substrate. These findings may shade light on the understanding of the growth of Pd metal clusters on alloy surface and the construction of nanoscale devices.     

h-BN/Ru(0 0 0 1) nanomesh: A 14-on-13 superstructure with 3.5 nm periodicity

The structure of epitaxially grown hexagonal boron nitride (h-BN) on the surface of a Ru(0 0 0 1) single crystal was investigated using surface X-ray diffraction, which showed the system to form a commensurate 14-on-13 superstructure. This result disagrees with previous reports on superstructures of the same system and arguments based on simple thermal expansion coefficient calculations. We argue that the larger observed superstructure forms because of the strong bonding of h-BN to Ru. In comparison to h-BN/Rh(1 1 1) it can accommodate more induced lateral in-plane strain- or lock-in energy over larger regions (referred to as the holes) within the superstructure, which itself can consequently become larger.     

Ellipsometric detection of GaAs(0 0 1) surface hydrogenation in H2 atmosphere

Optical properties of MBE-grown GaAs(0 0 1) surfaces have been studied by spectroscopic ellipsometry under dynamic conditions of ramp heating and cooling after desorption of passivating As-cap-layer with low pressure H₂ atmosphere (14 Torr) applied to the surface. The temperature dependence of GaAs pseudo-dielectric function with atomically smooth (0 0 1) surface carrying the fixed Ga-rich (4 × 2) reconstruction was obtained for the temperature range of 160–600 °C. It is shown ellipsometrically that GaAs(0 0 1) heating in the molecular hydrogen atmosphere results in the formation of hydrogenated layer on the surface.     

Improved electrical parameters of vacuum annealed Ni/4H-SiC (0 0 0 1) Schottky barrier diode

The reported work has been focused on the improvement of electrical parameters of Schottky diode using vacuum annealing at mild temperature in Ar gas ambient. Nickel Schottky barrier diodes were fabricated on 50 μm epitaxial layer of n-type 4H-SiC (0 0 0 1) substrate. The values of leakage current, Schottky barrier height (?_B), ideality factor (η) and density of interface states (N_SS) were obtained from experimentally measured current–voltage (I–V) and capacitance–voltage (C–V) characteristics before and after vacuum annealing treatment. The data revealed that ?_B, η and reverse leakage current for the as-processed diodes are 1.25 eV, 1.6 and 1.2 nA (at ?100 V), respectively, while for vacuum annealed diodes these parameters are 1.36 eV, 1.3 and 900 pA (at same reverse voltage). Improved characteristics have been resulted under the influence of vacuum annealing because of lesser number of minority carrier generation due to incessant reduction of number of available discrete energy levels in the bandgap of 4H-SiC substrate and lesser number of interface states density at Ni/4H-SiC (0 0 0 1) interface.     

Acetaldehyde photochemistry on TiO2(1 1 0)

The ultraviolet (UV) photon induced decomposition of acetaldehyde adsorbed on the oxidized rutile TiO₂(1 1 0) surface was studied with photon stimulated desorption (PSD) and thermal programmed desorption (TPD). Acetaldehyde desorbs molecularly from TiO₂(1 1 0) with minor decomposition channels yielding butene on the reduced TiO₂ surface and acetate on the oxidized TiO₂ surface. Acetaldehyde adsorbed on oxidized TiO₂(1 1 0) undergoes a facile thermal reaction to form a photoactive acetaldehyde–oxygen complex. UV irradiation of the acetaldehyde–oxygen complex initiated photofragmentation of the complex resulting in the ejection of methyl radical into gas phase and conversion of the surface bound fragment to formate.     

Synthesis and characterization of layered Li1−x(Ni0.5Co0.5)1−yFeyO2(0 ≤ (1 − x) ≤ 1 and 0 ≤ y ≤ 0.2) cathodes

Layered Li(Ni_0.5Co_0.5)_1−yFe_yO₂ cathodes with 0 ≤ y ≤ 0.2 have been synthesized by firing the coprecipitated hydroxides of the transition metals and lithium hydroxide at 700 °C and characterized as cathode materials for lithium ion batteries to various cutoff charge voltages (up to 4.5 V). While the y = 0.05 sample shows an improvement in capacity, cyclability, and rate capability, those with y = 0.1 and 0.2 exhibit a decline in electrochemical performance compared to the y = 0 sample. Structural characterization of the chemically delithiated Li_1−x(Ni_0.5Co_0.5)_1−yFe_yO₂ samples indicates that the initial O3 structure is maintained down to a lithium content (1 − x) ≈ 0.3. For (1 − x) < 0.3, while a P3 type phase is formed for the y = 0 sample, an O1 type phase is formed for the y = 0.05, 0.1 and 0.2 samples. Monitoring the average oxidation state of the transition metal ions with lithium contents (1 − x) reveals that the system is chemically more stable down to a lower lithium content (1 − x) ≈ 0.3 compared to the Li_1−xCoO₂ system. The improved structural and chemical stabilities appear to lead to better cyclability to higher cutoff charge voltages compared to that found before with the LiCoO₂ system.     

Ab initio study of structural and magnetic properties of cubic Fe4N(0 0 1) surface

First-principles calculations are employed to study the structural and magnetic properties of fully-relaxed cubic Fe₄N(0 0 1) surfaces with both Fe₂- and Fe₂N-termination. The results of surface stability calculations show that the (0 0 1) surface of Fe₄N is most possibly existing with Fe₂N-termination. Slab structures have more localized features in the density of states especially for the Fe₂N-terminated surface due to structure relaxation. The average magnetic moments of Fe atoms increase with increasing thickness of slabs. The calculated interlayer distances indicate that the decreases of d₁₂ and d₂₃ result in stronger hybridization and shorter bond distances between Fe2 atom in the second layer and other atoms in surface or the third layers, which lead to variation of magnetic moments with different slab thicknesses.     

Oxygen adatoms at SrTiO3(0 0 1): A density-functional theory study

We present a density-functional theory study addressing the energetics and electronic structure properties of isolated oxygen adatoms at the SrTiO₃(0 0 1) surface. Together with a surface lattice oxygen atom, the adsorbate is found to form a peroxide-type molecular species. This gives rise to a non-trivial topology of the potential energy surface for lateral adatom motion, with the most stable adsorption site not corresponding to the one expected from a continuation of the perovskite lattice. With computed modest diffusion barriers below 1 eV, it is rather the overall too weak binding at both regular SrTiO₃(0 0 1) terminations that could be a critical factor for oxide film growth applications.     

Electronic charge transfer between Au nano-particles and TiO2-terminated SrTiO3(0 0 1) substrate

The interaction between Au nano-particles and oxide supports is recently discussed in terms of the catalytic activities. This paper reports the electronic charge transfer between Au nano-particles and TiO₂-terminated SrTiO₃(0 0 1) substrate, which is compared with that for stoichiometric(S)-, pseudo-stoichiometric(S¹)- and reduced(R)-TiO₂(1 1 0) supports. We observed the photoelectron spectra of Au 4f, O 2s, Ti 3p, and Sr 4p lines and also measured the work functions for Au/oxides supports using synchrotron-radiation light. As the results, all the O 2s, Ti 3p, and Sr 4p lines for Au/SrTiO₃(0 0 1) show lower binding energy shifts in a quite same manner and abrupt increase in the work function is seen in an initial stage. This clearly evidences an electronic charge transfer from the substrate to Au probably due to a much larger work function of Au than SrTiO₃(0 0 1), which leads to an upward band bending (0.3 eV) just like a Schottky contact. Electronic charge transfers also take place at Au/S- and Au/S¹-TiO₂(1 1 0) and Au/R-TiO₂(1 1 0) interfaces, where electrons are transferred from Au to S- and S¹-TiO₂ and from R-TiO₂ to Au, as predicted by ab initio calculations.     

Growth and characterization of CoSi2 films on Si (1 0 0) substrates

In the present work, a special solid phase epitaxy method has been adapted for the preparation of CoSi₂ film. This method includes an epitaxial growth of Co films on Si (1 0 0) substrate, and in situ annealing of the Co/Si films in vacuum. It has been found that at the substrate temperature of 360°C, fcc cobalt film grows epitaxially on the Si (1 0 0) surface. The crystallographic orientation relations between fcc Co film and Si substrate determined from the electron diffraction result are: (0 0 1) Co//(0 0 1) Si, [1 0 0] Co//[1 1 0]Si. Upon annealing at temperatures range from 500 to 600°C, Co film reacts with Si substrate and transforms into CoSi₂. The CoSi₂ films prepared by this way are characterized by XTEM, XPS and AFM.     

Use of film thickness and Cu additive to improve (0 0 1) texture in MgO/FePtCu(C) bilayers

A multilayer structure has been proposed that demonstrates improved (0 0 1) texture for FePt-based L1₀ perpendicular media. Achieving a strong perpendicular magnetic anisotropy requires aligning the L1₀ crystallographic c-axis along the film normal. The ordered L1₀ FePt structure is tetragonal with a c/a ratio close to 0.965. This makes discriminating between the three crystallographic variants ([1 0 0], [0 1 0], and the desired [0 0 1]) difficult. Alloying FePt with Cu to reduce the c/a ratio and using a multilayer approach to keep the magnetic layers thin results in a structure with an adjustable M_rt and a strong (0 0 1) texture (rocking curve widths around 2°). This is a remarkable improvement in texture from pure FePt multilayered films or monolithic FePt(X) films. The proposed [MgO(2 nm)/Fe_50−xPt₅₀Cu_x(5 nm)]_×n structure limits grain size in the vertical (perpendicular) direction albeit not in the plane of the film. Carbon can be added to the FePtCu layer to reduce the grain size with minimal degradation of the (0 0 1) orientation.     

Potential-induced structure transitions in self-assembled monolayers: II. Propanethiol on Au(1 0 0)

The structure of propanethiol self-assembled monolayers (SAMs) on Au(1 0 0) in 0.1 M H₂SO₄ has been investigated as a function of electrode potential by in situ scanning tunnelling microscopy (STM). These studies reveal a potential-induced, reversible transition between an in essence quadratic and a distorted hexagonal structure. We suggest that a thiolate-driven surface reconstruction, similar to Au(1 0 0)-(hex), is responsible for the hexagonal SAM structure, whereas the quadratic one refers to the unreconstructed substrate.     

Nonlinear magnetoelastic effects in ultrathin epitaxial FCC Co(0 0 1) films:: an ab initio study

Those linear and nonlinear magnetoelastic coupling coefficients which determine the magnetostrictive stress and the strain-induced out-of-plane magnetic anisotropy in epitaxially grown FCC Co(0 0 1) films are calculated by the ab initio density functional electron theory. The nonlinear couplings have a strong effect on the change Δσ₁^m of the in-plane magnetostrictive stress resulting from a change of the magnetization direction from [0 1 0] to [1 0 0], but a negligibly small effect on the out-of-plane anisotropy e_MCA. The calculations confirm the experimental result that the measured out-of-plane anisotropy cannot be totally attributed to volume magnetoelastic effects. Estimates are given for the nonlinear magnetoelastic coupling coefficients m₁^γ,2 and m₂^γ,2.     

Adsorption of molecular SiO2 on a clean Si(1 0 0) surface

We have investigated the adsorption of molecular (gaseous) SiO₂ on a clean Si(1 0 0) p(2 × 2) reconstructed surface using density functional theory based methods. The SiO₂ molecule is found to be chemisorbed on various sites on the Si surface and the most energetically favourable structure is on top of the dimers. The minimum energy pathways for the various adsorption channels indicate that the reaction is barrierless in all cases. The corresponding vibrational spectrum is also calculated and the adsorbed molecules are, as expected, found to have red-shifted vibrational frequencies. The energetically favourable adsorption sites and adsorption energies are comparable to the results found for SiO.     

Structural and magnetic properties of BCC Fe/Co (0 0 1) superlattices

In thin layered Fe/Co (0 0 1), grown on MgO (0 0 1), both Fe and Co crystallize in the body-centered cubic (BCC) structure, as seen in a series of superlattices where the layer thickness of the components is varied from two to twelve atomic monolayers. These superlattices have novel magnetic properties as observed by magnetization and polarized neutron reflectivity measurements. There is a significant enhancement of the magnetic moments of both Fe and Co at the interfaces. Furthermore, the easy axis of the system changes from [1 0 0] for films of low cobalt content to [1 1 0] for a Co content exceeding 33%. No indication of a uniaxial anisotropy component is found in any of the samples. The first anisotropy constant (K₁) of BCC Co is found to be negative with an estimated magnitude of 110 kJ/m³ at 10 K. In all cases, the magnetic moments of Fe and Co have parallel alignment.     

Adsorption of ZnO, (ZnO)2 and (ZnO)3 on MgO(0 0 1)

We have investigated the adsorption of ZnO, atomic Zn, atomic O and (ZnO)_n on the flat MgO(0 0 1) surface by means of density functional calculations. A single ZnO molecule prefers to bind in a position parallel to the surface with the zinc atom above a surface oxygen atom and the oxygen above a magnesium atom. Adsorption of a pair of ZnO molecules leads to the formation of (ZnO)₂ on the surface with geometric parameters slightly distorted from those of the free molecule, providing an indication of surface interaction with the adsorbate. Finally, the trimer forms on the surface with the same general shape as the gas phase trimer, but with angular distortions influenced by surface-molecule interactions. The effects of increasing surface coverage are also explored.