Cu nanoclusters-based ratiometric fluorescence probe for ratiometric and visualization detection of copper ions

Copper is a highly toxic environmental pollutant with bioaccumulative properties. Therefore, sensitive detection of Cu²⁺ is very important to prevent over-ingestion, and visual detection is preferred for practical applications. In this work, we developed a simple and environmental friendly approach to synthesize hyperbranched polyethyleneimine-protected copper nanoclusters (hPEI-Cu NCs) with great stability against extreme pH, high ionic strength, thiols etching and light illumination, which were then conjugated to the surface of silica coated CdSe quantum dots (QDs) to design a ratiometric fluorescence probe. In the presence of different amounts of Cu²⁺ ions, the fluorescence of Cu NCs can be drastically quenched, while the emission from QDs stayed constant to serve as a reference signal and the color of the probe changed from yellow-green to red, resulting in ratiometric and visualization detection of Cu²⁺ ion with high accuracy. The detection limit for Cu²⁺ was estimated to be 8.9 nM, much lower than the allowable level of Cu²⁺ in drinking water (∼20 μM) set by U.S. Environmental Protection Agency. Additionally, this probe can be also applied for the determination of Cu²⁺ ion in complex real water samples.     

A Chromo-Fluorogenic Naphthoquinolinedione-Based Probe for Dual Detection of Cu2+ and Its Use for Various Water Samples

The presence of an abnormal amount of Cu²⁺ in the human body causes various health issues. In the current study, we synthesized a new naphthoquinolinedione-based probe (probe 1) to monitor Cu²⁺ in different water systems, such as tap water, lakes, and drain water. Two triazole units were introduced into the probe via a click reaction to increase the binding affinity to a metal ion. In day-light, probe 1 dissolved in a mixed solvent system (HEPES: EtOH = 1:4) showed a vivid color change from light greenish-yellow to pink in the presence of only Cu²⁺ among various metal ions. In addition, the green luminescence and fluorescence emission of the probe were effectively bleached out immediately after Cu²⁺ addition. The limit of detection (LOD) of the probe was 0.5 µM when a ratio-metric method was used for metal ion detection. The fluorescence titration data of the probe with Cu²⁺ showed a calculated LOD of 41.5 pM. Hence, probe 1 possesses the following dual response toward Cu²⁺ detection: color change and fluorescence quenching. Probe 1 was also useful for detecting Cu²⁺ spiked in tap/lake water as well as the cytoplasm of live HeLa cells. The current system was investigated using ultraviolet-visible and fluorescence spectroscopy as well as density functional theory calculations (DFT).     

A Simple Turn-off Schiff Base Fluorescent Sensor for Copper (II) Ion and Its Application in Water Analysis

An aniline-functionalized naphthalene dialdehyde Schiff base fluorescent probe L with aggregation-induced enhanced emission (AIEE) characteristics was synthesized via a simple one-step condensation reaction and exhibited excellent sensitivity and selectivity towards copper(II) ions in aqueous media with a fluorescence “ turn-off ” phenomenon. The detection limit of the probe is 1.64 × 10⁻⁸ mol·L⁻¹. Furthermore, according to the results of the UV-vis/fluorescence titrations, Job’s plot method and ¹H-NMR titrations, a 1:2 stoichiometry was identified. The binding constant between L and Cu²⁺ was calculated to be K_a = 1.222 × 10³. In addition, the AIEE fluorescent probe L could be applied to detection in real water samples with satisfactory recoveries in the range 99.10–102.90% in lake water and 98.49–102.37% in tap water.     

Crown daisy leaf waste–derived carbon dots: A simple and green fluorescent probe for copper ion

In this paper, N-doped carbon quantum dots (N-CDs) were fabricated using crown daisy leaves, a kitchen waste, as carbon source. The synthesized N-CDs possessed abundant surface functional groups, such as hydroxyl, carboxyl, and amino groups, and had good dispersibility in water. Because of the special fluorescence quenching property toward Cu²⁺, the synthesized N-CDs can be exploited as an effective label-free fluorescent probe for Cu²⁺ determination. The possible fluorescence sensing mechanism considered the selective coordination interaction between Cu²⁺ ion and the hydroxyl, carboxyl, and amino groups of the N-CDs. The control experiments also showed that the N-doped aromatic C–N heterocycle structure played a crucial role in selective sensing of Cu²⁺. The decrease in fluorescence efficiencies was linearly related with the Cu²⁺ concentrations in the range of 10.0nM to 120.0nM, with a response limit of 1.0nM. The prepared probe was also applied for Cu²⁺ determination in real river water.     

Imidazo[1,2-a]pyridine-substituted coumarin as a selective ratiometric sensor for Cu2+ ion

A novel fluorescent chemosensor, (E)-7-(diethylamino)-3-((2-phenylimidazo[1,2-a]pyridin-3-ylimino)methyl)-2H-chromen-2-one 1a, has been synthesised and characterised. This chemosensor displayed an extreme selective fluorescence emission only with Cu²⁺ ion over all other metal ions examined. The Job’s plot experiment analysis suggested the binding ratio of the chemosensor 1a with Cu²⁺ was 1:1 metal-to-ligand ratio. The association constant for Cu²⁺ towards receptor 1a obtained from Benesi–Hildebrand plot was found to be 4.859 × 10³ M^?1 with a detection limit 4.6 × 10^?8 M. Fluorescence enhancement caused by Cu²⁺ binding with chemosensor 1a attributed to combinational effect of intramolecular charge transfer and chelation-enhanced fluorescence occurred at pH 8.0.     

A highly selective turn-on fluorescent chemosensor for copper(II) ion

A new pyrene derivative (1) containing a diaminomaleonitrile moiety exhibits high selectivity for Cu²⁺ detection. Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Fe³⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence values for the system. The apparent association constant (K_a) of Cu²⁺ binding in chemosensor 1 was found to be 5.55×10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5-7.5.     

Fluorescence sensing of Cu and Hg by a dipyrene ligand involving an excimer-switch off mechanism

A novel dipyrene ligand 1 has been designed which shows intramolecular excimer formation in solution. Its specific interaction with Cu²⁺ or Hg²⁺ leads to the disruption of the excimer and results in a fluorescence-mediated sensing of these ions in a mixed organic-aqueous solution. Apart from steady-state studies, time-resolved fluorescence measurements also reveal that excimer-switch off caused by metal ion coordination leads to the selective detection of these ions.     

A highly sensitive naphthalimide-based fluorescent probe for detection of Cu2+ via selective hydrolysis reaction and its application in practical samples

A novel fluorescent probe CN3, containing 1,8-naphthalimide and picolinate units, was synthesized, and its structure was characterized by ¹H nuclear magnetic resonance spectroscopy (H NMR), ¹³C nuclear magnetic resonance spectroscopy (C NMR), and mass spectroscopy techniques. The detection property of CN3 toward copper ions (Cu²⁺) has been investigated in ethanol–HEPES buffer (v/v = 1/1, pH = 7.40) solution by UV–Vis absorption and fluorescence emission spectra. The results showed that CN3 had a highly selective and sensitive fluorescence quenching response to Cu²⁺, which was attributed to the generation of weak fluorescent N-ethyl-4-hydroxyphenyl-1,8- naphthalimide (compound 2) in polar ethanol–HEPES buffer (v/v = 1/1, pH = 7.40) via selective hydrolysis reaction. The detection of CN3 for Cu²⁺ was not influenced in the presence of other competing metal ions, and the limit of detection was as low as 50.0 nM. Therefore, the color of CN3 changed from colorless to yellowish when the Cu²⁺ was added. Furthermore, the fluorescent probe CN3 was utilized to detect Cu²⁺ in real water samples with fine performance.     

A novel lipid droplets-targeting fluorescent probe based on dicyanisophorone and carbazole for Cu2+ and its application

A novel fluorescent probe, LCH , based on dicyanisophorone and carbazole, was prepared for the visual detection of Cu²⁺. The probe LCH could recognize Cu²⁺ by fluorescence quenching in EtOH/H₂O (1/4, v/v) solution, which could be easily identified under the 365 nm UV lamp, and the detection limit was as low as 0.785 μM. The recognition mechanism of probe LCH with Cu²⁺ was determined by combining ¹H NMR titration, MS, and theoretical calculations. Practical application experiments showed that probe LCH could be used to detect Cu²⁺ in the test strip experiments. Cell imaging experiments showed that the probe LCH owned good cell permeability and could be applied to the imaging of Cu²⁺ in HepG2 cells. In addition, fluorescence colocalization experiments showed that LCH could target lipid droplets. These results indicate that the probe LCH will have a good application prospect in environmental detection and clinical medicine.     

Near-Infrared Fluorimetric Determination of Copper(Ⅱ) Ions Using CdHgTe Nanorods as Probe

Stable water‐soluble CdHgTe nanorods with an emission wavelength at 722 nm, obtained by doping Hg²⁺ into CdTe nanorods, has been used as a near‐infrared region (NIR) probe to investigate their interaction with copper(II) ions. A new fluorimetric method for the determination of copper(II) ions has been developed based on the quenching effect of copper(II) ions on the emission of CdHgTe nanorods. The mechanism studies show that an effective electron transfer from nanorods to the copper(II) ions occurred based on the coordination reaction between copper(II) ions and the carboxyl groups on the nanorods surface, which could be responsible for the emission quenching of CdHgTe nanorods. Under optimum conditions, the linear range of the calibration curve for the determination of Cu²⁺ is from 8.0×10^?9 to 1.0×10^?6 mol/L and the detection limit is 2.0×10^?9 mol/L. Owing to low background interference of NIR measurement, the proposed method displays relative high sensitivity and selectivity. Especially, some physiologically important cations almost do not interfere with the determination of Cu²⁺. The proposed method was also applied to the determination of trace Cu²⁺ in real aqueous samples with satisfactory results.     

Cu triggered fluorescence sensor based on fluorescein derivative for Pd detection

This Letter describes the synthesis of a novel fluorescein-based derivative used as the fluorescence sensor for Pd²⁺ detection. The sensor can show highly selective and sensitive ‘off-on’ fluorescence response only in the presence of Cu²⁺ as a synergic trigger, which presents a new strategy for Pd²⁺ detection method.     

基于T-T碱基错配的荧光传感器特异性检测汞离子

在本文中,我们研制了一种基于T-T碱基错配特异性键合汞离子的荧光传感器用于汞离子的检测。该传感器由两条分别标记了荧光基团（F）和淬灭基团（Q）的DNA探针组成,并且含有两对用于结合汞离子的T-T错配碱基。当汞离子存在时,两条探针之间形成T-Hg2+-T结构,作用力增强,从而拉近了荧光基团与淬灭基团之间的距离,发生能量转移,使荧光信号在一定程度上被淬灭。在优化的条件下,我们使用该传感器对汞离子进行检测,动力学响应范围为50nM到1000nM,线性相关方程为y= 5281.13 - 1650.56 lg[Hg2+] ( R2 = 0.985),检测下限为79nM。此外,我们还考察了该传感器的选择性,当用其它干扰离子（浓度都为1.0µM）代替待测离子进行实验时,没有发生明显的荧光淬灭,说明该传感器具有较高的选择性。该传感器的构建为汞离子的检测提供了一条快速、简便的新途径。     

Carbazole‐based colorimetric and fluorescent probe for Cu2+ and its utility in bio‐imaging and real water samples

A new carbazole functionalized Schiff base CBM was synthesized and characterized. CBM can selectively recognize Cu²⁺ via UV–vis and fluorescence signal among common biologically relevant metal ions. When Cu²⁺ was added to CBM, there was a significant enhancement at the maximum absorption wavelength of 393 nm and with a distinct blue shift. The maximum emission peak was significantly attenuated by a factor of about 15 times at 535 nm and the blue shift of emission wavelength was observed. When other metal ions were added, there was no remarkable change at the maximum absorption and emission peak. Under the illumination of 365 nm ultraviolet lamp, the color of the CBM solution changed from light blue to dark blue after the addition of Cu²⁺. The combination mechanism of CBM with Cu²⁺ was nicely explored by density functional theory studies. The probe CBM has good cell permeability, fluorescence electron microscopy experiments show that CBM can be used as a fluorescent probe to detect the presence or absence of Cu²⁺ in Hela cells. Furthermore, the probe CBM can also be used for the detection of copper ions in actual water samples.     

Highly selective chromogenic and fluorogenic probe based on benzothiazole-thiosemicarbazone Schiff base for detection of copper (II) in real samples

Copper is the third most abundant essential transition metal ion in the human body. It's responsible for important activities in many living things, but excessive intake of Cu²⁺ can lead to a range of diseases. A colorimetric and turn-off fluorescent probe (E)-2-(5-(benzothiazol-2-yl)-2-(diethylamino)-4-hydroxybenzylidene)-N-phenylhydrazine-1-carbothioamide ( ZTR ) was designed and synthesized by thiosemicarbazone Schiff base as a specific complexes site strategy to achieve highly specific Cu²⁺ detection. The fluorescence of the probe ZTR solution fell dramatically when Cu²⁺ was added, and its appearance changed from dazzling blue to nearly colorless. The simple structure and readily available fluorescent probe provide a novel approach for the quantitative detection of Cu²⁺ in the linear range from 0 to 0.12 μM, with a detection limit down to 16 nM, and with high selectivity for Cu²⁺ over 15 other metal ions. Job’s plot analysis showed that probe ZTR and Cu²⁺ formed a 1:1 coordination complex. In addition, because of its low detection limits and fast response time, the created fluorescent molecule was effectively used to study the target ions on test paper strips and in water samples.))     

A bifunctional,colorimetric and fluorescent probe for recognition of Cu2+ and Hg2+ and its application in molecular logic gate

<正>~~     

Selective Detection of Mercury（Ⅱ） and Copper（Ⅱ） Based on the Opposite Size-dependent Fluorescence Quenching of CdTe Quantum Dots

Three different size CdTe quantum dots （QDs） capped by 3-mercaptopropionic acid （MPA） have been prepared in aqueous solutions, and their interactions with Cu^2＋ and Hg^2＋ have been investigated. The opposite size-dependent fluorescence quenching of CdTe QDs by Hg^2＋ and Cu^2＋ was observed： Hg^2＋ quenched smaller particles more efficiently than larger ones while larger particles were more markedly quenched by Cu^2＋. Based on the different size responses, Hg^2＋ and Cu^2＋ were respectively detected with high sensitivity and selectivity, for the first time, using the QDs with different sizes but the same components and capping ligands.     

Interfacially Super-Assembled Benzimidazole Derivative-Based Mesoporous Silica Nanoprobe for Sensitive Copper (II) Detection and Biosensing in Living Cells

Mesoporous silica nanoparticles (MSNs) functionalized with benzimidazole-derived fluorescent molecules (DHBM) are fabricated via a feasible interfacial superassembly strategy for the highly sensitive and selective detection of Cu²⁺. DHBM-MSN exhibits an obvious quenching effect on Cu²⁺ in aqueous solutions, and the detection limit can be as low as 7.69×10⁻⁸ M. The DHBM-MSN solid-state sensor has good recyclability, and the silica framework can simultaneously improve the photostability of DHBM. Two mesoporous silica nanoparticles with different morphologies were specially designed to verify that nanocarriers with different morphologies do not affect the specific detectionability. The detection mechanism of the fluorescent probe was systematically elucidated by combining experimental results and density function theory calculations. Moreover, the detection system was successfully applied to detect Cu²⁺ in bovine serum, juice, and live cells. These results indicate that the DHBM-MSN fluorescent sensor holds great potential in practical and biomedical applications.     

Rapid detection of trace Cu2+ using an l‐cysteine based interdigitated electrode sensor integrated with AC electrokinetic enrichment

Copper is an indispensable trace element for human health. Too much or too little intake of copper ion (Cu²⁺) can lead to its own adverse health conditions. Therefore, detection of Cu²⁺ is always of vital importance. In this work, a simple sensor was developed for rapid detection of trace Cu²⁺ in water, in which L‐cysteine (Cys) as a molecular probe was self‐assembled on a gold interdigital electrode to form a monolayer for specific capture of Cu²⁺. The interfacial capacitance of interdigital electrode was detected to indicate the target adsorption level under an AC signal working as the excitation to induce directed movement and enrichment of Cu²⁺ to the electrode surface. This sensor reached a limit of detection of 4.14 fM and a satisfactory selectivity against eight other ions (Zn²⁺, Hg²⁺, Pb²⁺, Cd²⁺, Mg²⁺, Fe²⁺, As³⁺, and As⁵⁺). Testing of spiked tap water was also performed, demonstrating the sensor's usability. This sensor as well as the detection method shows a great application potential in fields such as environmental monitoring and medical diagnosis.     

Benzimidazole-based chromogenic chemosensor for the recognition of oxalic acid via counter ion displacement assay in semi-aqueous medium

An azo dye-coupled benzimidazole-based receptor 1 was synthesized and investigated as a receptor for metal ions in semi-aqueous medium. The receptor recognizes Cu²⁺ with high selectivity over other metal ions. The resultant complex 1·Cu²⁺ was found to selectively bind oxalic acid via counter ion displacement.     

Fabrication of hydrophilic luminescent zinc oxide quantum dots for selective detection of copper ions and efficient inhibition of harmful fungi

In this study, we have successfully prepared surface modified zinc oxide quantum dots (M-ZnO QDs) with ultra-stable fluorescence and excellent hydrophilicity through introducing (3-aminopropyl)triethoxysilane (APTES). The as-prepared M-ZnO QDs under the optimum condition presented strong yellow fluorescence emission under 355 nm excitation and showed satisfied reproducibility. Physical and chemical properties of the synthesized ZnO QDs were further studied by various characterization techniques. Transmission electron microscopy showed homogeneous distribution of spherical M-ZnO QDs with the average particle size of 4.03 nm. According to the characteristic that metal ions can quench fluorescence, M-ZnO QDs-based fluorescence sensor for the detection of Cu²⁺ in aqueous solution is developed in this work, which has the advantages of excellent selectivity, good sensitivity and a wide linear range. The limit of detection was 0.51 μM and the linear detection range was 1–200 μM for Cu²⁺ determination. The practicability of the fluorescent probe is further validated in the lake water and the satisfactory spiked recoveries of Cu²⁺ ranges from 99.1 % to 108.8 %. Besides, M-ZnO QDs displayed concentration inhibition effect and strain effect on the growth of fungi. Thus, the as-prepared M-ZnO QDs are demonstrated to be promising for Cu²⁺ determination and anti-fungal applications.