Aggregation behavior of poly(γ‐benzyl‐L‐glutamate)‐b‐polyisoprene‐b‐poly(γ‐benzyl‐L‐glutamate) rod‐coil‐rod triblock copolymer in N,N‐dimethylformamide

Solution property of poly(γ‐benzyl‐L ‐glutamate)‐b‐polyisoprene‐b‐poly(γ‐benzyl‐L ‐glutamate) (GIG copolymer) was studied by using dynamic light scattering and static light scattering for N,N‐dimethylformamide (DMF) solution and DMF/toluene mixed solutions. GIG copolymer proved to aggregate in DMF and under DMF‐rich condition, that is, high‐polar region. The aggregate decreased in size, and completely disappeared under toluene‐rich condition, that is, low‐polar region. The correlation between solubility parameter and aggregate size of GIG copolymer in the DMF/toluene solution systems quantitatively demonstrated how strongly polarity caused by hydrogen bond made an impact on the aggregation behavior. Because the main driving force to the aggregation under DMF‐rich condition originates with polyisoprene (PIP) blocks, the aggregate in DMF is considered to be a core‐shell micelle consisting of flexible PIP core surrounded by rigid poly(γ‐benzyl‐L ‐glutamate) (PBLG) shell. The values of dimensionless parameter ρ, defined as the ratio of radius of gyration 〈S²〉^1/2 to hydrodynamic radius R_H, revealed that a single chain of GIG copolymer had the form of rigid rod with flexibility, that is, once‐broken rod, caused by the incorporation of a flexible PIP chain between two rigid PBLG rods in the DMF/toluene solution system. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1740–1748, 2010     

Visible‐Light‐Enabled Ruthenium‐Catalyzed meta‐C−H Alkylation at Room Temperature

Visible‐light‐induced ruthenium catalysis has enabled remote C?H alkylations with excellent levels of position control under exceedingly mild conditions at room temperature. The metallaphotocatalysis occurred under exogenous‐photosensitizer‐free conditions and features an ample substrate scope. The robust nature of the photo‐induced mild meta‐C?H functionalization is reflected by the broad functional group tolerance, and the reaction can be carried out in an operationally simple manner, setting the stage for challenging secondary and tertiary meta‐C?H alkylations by ruthenaphotoredox catalysis.     

Light‐Regulated Polymerization under Near‐Infrared/Far‐Red Irradiation Catalyzed by Bacteriochlorophyll a

Photoregulated polymerizations are typically conducted using high‐energy (UV and blue) light, which may lead to undesired side reactions. Furthermore, as the penetration of visible light is rather limited, the range of applications with such wavelengths is likewise limited. We herein report the first living radical polymerization that can be activated and deactivated by irradiation with near‐infrared (NIR) and far‐red light. Bacteriochlorophyll a (Bachl a) was employed as a photoredox catalyst for photoinduced electron transfer/reversible addition–fragmentation chain transfer (PET‐RAFT) polymerization. Well‐defined polymers were thus synthesized within a few hours under NIR (λ=850 nm) and far‐red (λ=780 nm) irradiation with excellent control over the molecular weight (M_n/M_w<1.25). Taking advantage of the good penetration of NIR light, we showed that the polymerization also proceeded smoothly when a translucent barrier was placed between light source and reaction vessel.     

Visible‐Light‐Induced Trifluoromethylation of Isonitrile‐Substituted Methylenecyclopropanes: Facile Access to 6‐(Trifluoromethyl)‐7,8‐Dihydrobenzo[k]phenanthridine Derivatives

A new visible‐light‐induced trifluoromethylation of isonitrile‐substituted methylenecyclopropanes is developed. A range of substituted 6‐(trifluoromethyl)‐7,8‐dihydrobenzo[k]phenanthridine derivatives are readily furnished by this newly developed tandem reaction with moderate to good yields. This reaction allows the direct formation of two six‐membered rings and three new C?C bonds, including the C?CF₃ bond, under visible light irradiation.     

A visible light responsive azobenzene‐functionalized polymer: Synthesis,self‐assembly,and photoresponsive properties

A novel visible light responsive random copolymer consisting of hydrophobic azobenzene‐containing acrylate units and hydrophilic acrylic acid units has been prepared. The azobenzene molecule bearing methoxy groups at all four ortho positions is readily synthesized by one‐step conversion of diazotization. The as‐prepared polymer can self‐assemble into nanoparticles in water due to its amphiphilic nature. The tetra‐o‐methoxy‐substituted azobenzene‐functionalized polymer can exhibit the trans‐to‐cis photoswitching under the irradiation with green light of 520 nm and the cis‐to‐trans photoswitching under the irradiation with blue light of 420 nm in both solution and aggregate state. The morphologies of the self‐assembled nanoparticles are revealed by TEM and DLS. The controlled release of loaded molecules from the nanoparticles can be realized by adjusting pH value since the copolymer possesses pH responsive acrylic acid groups. The fluorescence of loaded Nile Red in the nanoparticles can be tuned upon the visible light irradiation. The reversible photoswitching of the azobenzene‐functionalized polymer under visible light may endow the polymer with wide applications without using ultraviolet light at all. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2768–2775     

Metal‐Free Dehydrogenation of N‐Heterocycles by Ternary h‐BCN Nanosheets with Visible Light

An efficient metal‐free catalytic system has been developed based on hexagonal boron carbon nitride (h‐BCN) nanosheets for the dehydrogenation of N‐heterocycles with visible light; hydrogen gas is released in the process, and thus no proton acceptor is needed. This acceptorless dehydrogenation of hydroquinolines, hydroisoquinolines, and indolines to the corresponding aromatic N‐heterocycles occurred in excellent yield under visible‐light irradiation at ambient temperature. With h‐BCN as the photocatalyst and water as the solvent, this environmentally benign protocol shows broad substitution tolerance and high efficiency.     

Structures and photoactive properties of poly(styrene‐co‐vinylbenzophenone)

Poly(styrene‐co‐vinylbenzophenone) prepared by a graft reaction on polystyrene revealed photoactive properties under irradiation of UVA. The photoactive structural features of the polymer were examined via electron paramagnetic resonance (EPR) under irradiation of UVA and fluorescent light. The photoactive functions of the polymer such as antimicrobial performance and dye decolorization ability were investigated. The results revealed that the poly(styrene‐co‐vinylbenzophenone) could generate radicals under fluorescent and UVA irradiation, and some radicals could stay alive for about 30 min in a dark chamber. The photoexcited polymer showed excellent antibacterial ability and decolorization effect on methylene blue and methyl orange dye under both daylight and UVA light. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2423–2430, 2008     

Efficient Synthesis of 3‐Phenylnaphtho[2,3‐b]furan‐4,9‐diones in Water and Their Fluorimetric Study in Solutions

A simple and efficient protocol has been developed for the synthesis of 3‐phenylnaphtho[2,3‐b]furan‐4,9‐diones by domino reaction of α‐bromonitroalkenes to 2‐hydroxynaphthalene‐1,4‐dione. With the optimal reaction conditions [NaOAc (120 mol%), water, 70°C, 7 h], the scope of the domino reaction was explored and the green approach provided the desired products in moderate to good yields at elevated temperature under aqueous‐mediated conditions. A mechanistic rationalization for this reaction is also provided. The absorption characteristics of the compounds were examined by UV‐Vis spectra and fluorescence spectroscopy. All compounds were fluorescent in solution emitting at blue light (432–433 nm), green light (512–536 nm), or yellow light (591 nm).     

The preparation of 3,6‐bis(3‐hexylthien‐2‐yl)‐s‐tetrazine and its conjugated polymers

We demonstrated, for the first time, that 3,6‐bis(3‐hexylthien‐2‐yl)‐s‐tetrazine (TTz) with hexyl group at the 3‐position of thiophene rings can be prepared using a modified sulfur‐assisted Pinner synthesis. Although the hexyl group creates large steric hindrance to the tetrazine ring formation reaction, and the reaction under a traditional condition only produces trace amount of the target product, the yield of this reaction under a modified reaction condition using anhydrous hydrazine at 68 °C can reach 65%. Two new copolymers of the resulting TTz and hexyl‐ or 2‐ethylhexyl‐substituted cyclepentadithiophene have been prepared. The polymers show a broader light absorption in film than in solution attributing to the large distribution of effective conjugation length of polymer chain due to the existence of both cis‐ and trans‐orientations of the 3‐hexylthiophene units in the planar polymer chain in solid state. Although the polymers show a narrow band gap and a deep HOMO level, which are desirable for generating an efficient light absorption and a larger open circuit voltage (V_oc) of the resulting solar cell devices, the device performance is not as good as expected. It is attributed to the random distribution of the cis‐ and trans‐conformations along the polymer chain. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Chemical‐Bond‐Mediated p–n Heterojunction Photocatalyst Constructed from Coordination Polymer Nanoparticles and a Conducting Copolymer: Visible‐Light Active and Highly Efficient

A visible‐light‐active p–n heterojunction photocatalyst has been synthesized by the enwrapping of poly[aniline‐co‐N‐(4‐sulfophenyl)aniline] ( PAPSA ) on a coordination polymer nanoparticle ( NCP ). Compared with the visible‐light‐inactive NCP , the new p–n heterojunction photocatalyst, PAPSA/NCP , exhibits a much higher efficiency in the reduction of Cr^VI under visible light. PAPSA performs two functions in this p–n heterojunction photocatalyst. First, as a visible‐light‐active material, it extends the photoresponse region of the photocatalyst from the ultraviolet to the visible‐light region. Secondly, as a p‐type semiconductor possessing suitable energy levels with respect to NCP , PAPSA forms a p–n heterojunction with the n‐type NCP ; the inner electric field of the p–n heterojunction accelerates the separation of electrons and holes, which enhances the photocatalytic efficiency. Furthermore, the p–n heterojunction photocatalyst exhibits outstanding stability during the photocatalytic reduction of Cr^VI.     

Visible‐Light‐Responsive Reversible Photoacid Based on a Metastable Carbanion

A new photoacid that reversibly changes from a weak to a strong acid under visible light was designed and synthesized. Irradiation generated a metastable state with high C?H acidity due to high stability of a trifluoromethyl‐phenyl‐tricyano‐furan (CF₃PhTCF) carbanion. This long‐lived metastable state allows a large proton concentration to be reversibly produced with moderate light intensity. Reversible pH change of about one unit was demonstrated by using a 0.1 mM solution of the photoacid in 95 % ethanol. The quantum yield was calculated to be as high as 0.24. Kinetics of the reverse process can be fitted well to a second‐order‐rate equation with k=9.78×10² M ^?1 s^?1. Response to visible light, high quantum yield, good reversibility, large photoinduced proton concentration under moderate light intensity, and good compatibility with organic media make this photoacid a promising material for macroscopic control of proton‐transfer processes in organic systems.     

Additive‐Free Green Light‐Induced Ligation Using BODIPY Triggers

Photochemical ligation is important in biomaterials engineering for spatiotemporal control of biochemical processes. Such reactions however generally require activation by high energy UV or short wavelength blue light, which can limit their use as a consequence of the potential of these high energy light sources to damage living cells. Herein, we present an additive‐free, biocompatible, chemical ligation triggered by mild visible light. BODIPY dyes with a pendant thioether attached at the meso‐position undergo photolysis of the [C?S] bond under green light (λ=530 nm) excitation, producing an ion pair intermediate that can react specifically with a propiolate group. The utility of this photochemical ligation in materials science is demonstrated by the fabrication of hydrogels with specific architectures, photo‐immobilization of biomacromolecules, and live cell encapsulation within a hydrogel scaffold.     

Microwave‐Hydrothermal Preparation and Visible‐Light Photoactivity of Plasmonic Photocatalyst Ag‐TiO2 Nanocomposite Hollow Spheres

Visible‐light‐driven plasmonic photocatalyst Ag‐TiO₂ nanocomposite hollow spheres are prepared by a template‐free chemically‐induced self‐transformation strategy under microwave‐hydrothermal conditions, followed by a photochemical reduction process under xenon lamp irradiation. The prepared samples are characterized by using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption‐desorption isotherms, X‐ray photoelectron spectroscopy, UV/Vis and Raman spectroscopy. Production of ?OH radicals on the surface of visible‐light illuminated TiO₂ was detected by using a photoluminescence method with terephthalic acid as the probe molecule. The photocatalytic activity of as‐prepared samples was evaluated by photocatalytic decolorization of Rhodamine B (RhB) aqueous solution at ambient temperature under visible‐light irradiation. The results show that the surface plasmon absorption band of the silver nanoparticles supported on the TiO₂ hollow spheres was red shifted, and a strong surface enhanced Raman scattering effect for the Ag‐TiO₂ nanocomposite sample was observed. The prepared nanocomposite hollow spheres exhibits a highly visible‐light photocatalytic activity for photocatalytic degradation of RhB in water, and their photocatalytic activity is higher than that of pure TiO₂ and commercial Degussa P25 (P25) powders. Especially, the as‐prepared Ag‐TiO₂ nanocomposite hollow spheres at the nominal atomic ratio of silver to titanium ( R ) of 2 showed the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2.     

Cobalt‐Catalyzed Enantio‐ and Diastereoselective Intramolecular Hydroacylation of Trisubstituted Alkenes

Enantio‐ and diastereoselective synthesis of trans ‐2,3‐disubstituted indanones is achieved by intramolecular hydroacylation of 2‐alkenylbenzaldehydes bearing trisubstituted alkenyl groups under cobalt‐chiral diphosphine catalysis. Notably, a high level of enantioselectivity is induced regardless of the stereochemistry (E /Z ratio) of the alkenyl group of the starting material. Deuterium‐labeling experiments shed light on the productive reaction pathways of the E ‐ and Z ‐isomers.     

Photo‐responsive amphiphilic poly(α‐hydroxy acids) with pendent o‐nitrobenzyl ester constructed via copper‐catalyzed azide‐alkyne cycloaddition reaction

Photo‐responsive block copolymer mPEG‐b‐poly(Tyr)‐g‐NB was prepared by introduction of o‐nitrobenzyl ester group into the side chain of amphiphilic poly(ethylene glycol)‐b‐poly(α‐hydroxy acids) (mPEG‐b‐poly(Tyr)) containing pendent alkynyl group via copper‐catalyzed azide‐alkyne cycloaddition reaction. The amphiphilic mPEG‐b‐poly(Tyr) was synthesized via the ring‐opening polymerization of O‐carboxyanhydrides, with monomethoxy poly(ethylene glycol) (mPEG) as macroinitiator. The molecular structure, self‐assembly, and photo‐controlled release of the obtained mPEG‐b‐poly(Tyr)‐g‐NB were thoroughly investigated. mPEG‐b‐poly(Tyr)‐g‐NB could self‐assemble into spherical micelles in water and showed disassembly under UV light irradiation, which was demonstrated by means of UV‐vis spectroscopy, scan electron microscopes, and dynamic light scattering measurement. Fluorescence emission measurements demonstrated that Nile red, encapsulated by micelles, can be released upon UV irradiation. This study provides a convenient way to construct smart poly(α‐hydroxy acids)‐based nanocarriers for controlled release of hydrophobic drugs. Copyright © 2015 John Wiley & Sons, Ltd.     

Water‐Soluble Pillar[n]arene Mediated Supramolecular Self‐Assembly: Multi‐Dimensional Morphology Controlled by Host Size

We report tunable supramolecular self‐assemblies formed by water‐soluble pillar[n]arenes ( WPn s, n=5–7) and bipyridinium‐azobenzene guests. Nanoscale or microscale morphology of self‐assemblies in water was controlled by the host size of WPn . Supramolecular self‐assemblies could undergo morphology conversion under irradiation with UV light.     

Photoresponsive self‐assembling structures from a pyrene‐based triblock copolymer

A new photoresponsive amphiphilic triblock copolymer, poly(pyrenylmethyl methacrylate)‐block‐polystyrene‐block‐poly(ethylene oxide) (PPy‐b‐PSt‐b‐PEO), was synthesized using atom‐transfer radical polymerization. Formation of colloidal aggregates of the polymer was observed in solutions under controlled conditions due to the amphiphilic nature of the polymer. Irradiation of the polymer aggregates using UV light resulted in the photodissociation of 1‐pyrenemethanol units from the polymer back‐bone resulting in break‐up of the aggregates mainly due to the hydrophilic nature of the residual polymer. The use of these polymer aggregates to trap hydrophobic fluorescent dyes in water and its controlled release on exposure to UV light has also been explored. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

New D‐A‐A’‐Configured Small Molecule Donors Employing Conjugation to Red‐shift the Absorption for Photovoltaics

Four new donor‐acceptor‐acceptor’ (D‐A‐A’)‐configured donors, CPNT , DCPNT , CPNBT , and DCPNBT equipped with naphtho[1,2‐c:5,6‐c′]bis([1,2,5]‐thiadiazole) (NT) or naphtho[2,3‐c][1,2,5]thiadiazole (NBT) as the central acceptor (A) unit bridging triarylamine donor (D) and cyano or dicyanovinylene acceptor (A’), were synthesized and characterized. All molecules exhibit bathochromic absorption shifts as compared to those of the benzothiadiazole (BT)‐based analogues owing to improved electron‐withdrawing and quinoidal character of NT and NBT cores that lead to stronger intramolecular charge transfer. Favorable energy level alignments with C₇₀, together with the good thermal stability and the antiparallel dimeric packing render CPNT and DCPNT suitable donors for vacuum‐processed organic photovoltaics (OPV)s. OPVs based on DCPNT : C₇₀ active layers displayed the best power conversion efficiency (PCE)=8.3%, along with an open circuit voltage of 0.92 V, a short circuit current of 14.5 mA cm^?2 and a fill factor of 62% under 1 sun intensity, simulated AM1.5G illumination. Importantly, continuous light‐soaking with AM 1.5G illumination has verified the durability of the devices based on CPNT :C₇₀ and DCPNT : C₇₀ as the active blends. The devices were examined for their feasibility of indoor light harvesting under 500 lux illumination by a TLD‐840 fluorescent lamp, giving PCE=12.8% and 12.6%, respectively. These results indicate that the NT‐based D‐A‐A’‐type donors CPNT and DCPNT are potential candidates for high‐stability vacuum‐processed OPVs suitable for indoor energy harvesting.     

Synthesis,characterization, photo‐induced alignment,and surface orientation of poly(9,9‐dioctylfluorene‐alt‐azobenzene)s

Three types of bi‐functionalized copolymers ( P1FAz , P2FAz , and P3FAz ) with different numbers of fluorene units and an azobenzene unit were synthesized and characterized using UV–vis and polarized absorption spectroanalysis. The trans‐cis photoisomerization was conformed under 400 nm light irradiation for all copolymers in chloroform. However, in the film state, only the trans‐cis photoisomerization occurred by mono‐fluorene attached copolymer poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐4,4′‐azobenzene)] ( P1FAz ). Photo‐induced alignment was achieved using the P1FAz film after irradiation with linear polarized 400 nm light and subsequent annealing at 60 °C. Surface orientation of a spin‐coating film of poly(9,9‐didodecylfluorene) ( F12 ) was achieved using the photo‐induced alignment layer of the P1FAz film after annealing at 90 °C. The photo‐induced alignment layer of P1FAz has potential application to the surface orientation technique for appropriate polymers, which will be useful for the fabrication of optoelectronics devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

The Dewar Isomer of 1,2‐Dihydro‐1,2‐azaborinines: Isolation,Fragmentation, and Energy Storage

The photochemistry of 1,2‐dihydro‐1,2‐azaborinine derivatives was studied under matrix isolation conditions and in solution. Photoisomerization occurs exclusively to the Dewar valence isomers upon irradiation with UV light (>280 nm) with high quantum yield (46 %). Further photolysis with UV light (254 nm) results in the formation of cyclobutadiene and an iminoborane derivative. The thermal electrocyclic ring‐opening reaction of the Dewar valence isomer back to the 1,2‐dihydro‐1‐tert‐butyldimethylsilyl‐2‐mesityl‐1,2‐azaborinine has an activation barrier of (27.0±1.2) kcal mol⁻¹. In the presence of the Wilkinson catalyst, the ring opening occurs rapidly and exothermically (ΔH=(−48±1) kcal mol⁻¹) at room temperature.