MnO2 Nanosheets Grown on Nitrogen‐Doped Hollow Carbon Shells as a High‐Performance Electrode for Asymmetric Supercapacitors

A hierarchical hollow hybrid composite, namely, MnO₂ nanosheets grown on nitrogen‐doped hollow carbon shells (NHCSs@MnO₂), was synthesized by a facile in situ growth process followed by calcination. The composite has a high surface area (251 m²g^?1) and mesopores (4.5 nm in diameter), which can efficiently facilitate transport during electrochemical cycling. Owing to the synergistic effect of NHCSs and MnO₂, the composite shows a high specific capacitance of 306 F g^?1, good rate capability, and an excellent cycling stability of 95.2 % after 5000 cycles at a high current density of 8 A g^?1. More importantly, an asymmetric supercapacitor (ASC) assembled by using NHCSs@MnO₂ and activated carbon as the positive and negative electrodes exhibits high specific capacitance (105.5 F g^?1 at 0.5 A g^?1 and 78.5 F g^?1 at 10 A g^?1) with excellent rate capability, achieves a maximum energy density of 43.9 Wh kg^?1 at a power density of 408 W kg^?1, and has high stability, whereby the ASC retains 81.4 % of its initial capacitance at a current density of 5 A g^?1 after 4000 cycles. Therefore, the NHCSs@MnO₂ electrode material is a promising candidate for future energy‐storage systems.     

Porous Nitrogen‐Doped Carbon Nanotubes Derived from Tubular Polypyrrole for Energy‐Storage Applications

Porous nitrogen‐doped carbon nanotubes (PNCNTs) with a high specific surface area (1765 m² g^?1) and a large pore volume (1.28 cm³ g^?1) have been synthesized from a tubular polypyrrole (T‐PPY). The inner diameter and wall thickness of the PNCNTs are about 55 nm and 22 nm, respectively. This material shows extremely promising properties for both supercapacitors and for encapsulating sulfur as a superior cathode material for high‐performance lithium–sulfur (Li‐S) batteries. At a current density of 0.5 A g^?1, PNCNT presents a high specific capacitance of 210 F g^?1, as well as excellent cycling stability at a current density of 2 A g^?1. When the S/PNCNT composite was tested as the cathode material for Li‐S batteries, the initial discharge capacity was 1341 mAh g^?1 at a current rate of 1 C and, even after 50 cycles at the same rate, the high reversible capacity was retained at 933 mAh g^?1. The promising electrochemical energy‐storage performance of the PNCNTs can be attributed to their excellent conductivity, large surface area, nitrogen doping, and unique pore‐size distribution.     

Mesoporous MnCo2O4 with a Flake‐Like Structure as Advanced Electrode Materials for Lithium‐Ion Batteries and Supercapacitors

A mesoporous flake‐like manganese‐cobalt composite oxide (MnCo₂O₄) is synthesized successfully through the hydrothermal method. The crystalline phase and morphology of the materials are characterized by X‐ray diffraction, field‐emission scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller methods. The flake‐like MnCo₂O₄ is evaluated as the anode material for lithium‐ion batteries. Owing to its mesoporous nature, it exhibits a high reversible capacity of 1066 mA h g^?1, good rate capability, and superior cycling stability. As an electrode material for supercapacitors, the flake‐like MnCo₂O₄ also demonstrates a high supercapacitance of 1487 F g^?1 at a current density of 1 A g^?1, and an exceptional cycling performance over 2000 charge/discharge cycles.     

Three‐Dimensional MoS2 Hierarchical Nanoarchitectures Anchored into a Carbon Layer as Graphene Analogues with Improved Lithium Ion Storage Performance

Much attention has recently been focused on the synthesis and application of graphene analogues of layered nanomaterials owing to their better electrochemical performance than the bulk counterparts. We synthesized graphene analogue of 3D MoS₂ hierarchical nanoarchitectures through a facile hydrothermal route. The graphene‐like MoS₂ nanosheets are uniformly dispersed in an amorphous carbon matrix produced in situ by hydrothermal carbonization. The interlaminar distance between the MoS₂ nanosheets is about 1.38 nm, which is far larger than that of bulk MoS₂ (0.62 nm). Such a layered architecture is especially beneficial for the intercalation and deintercalation of Li⁺. When tested as a lithium‐storage anode material, the graphene‐like MoS₂ hierarchical nanoarchitectures exhibit high specific capacity, superior rate capability, and enhanced cycling performance. This material shows a high reversible capacity of 813.5 mAh g^?1 at a current density of 1000 mA g^?1 after 100 cycles and a specific capacity as high as 600 mAh g^?1 could be retained even at a current density of 4000 mA g^?1. The results further demonstrate that constructing 3D graphene‐like hierarchical nanoarchitectures can effectively improve the electrochemical performance of electrode materials.     

Synthesis of Hierarchically Porous Sandwich‐Like Carbon Materials for High‐Performance Supercapacitors

For the first time, hierarchically porous carbon materials with a sandwich‐like structure are synthesized through a facile and efficient tri‐template approach. The hierarchically porous microstructures consist of abundant macropores and numerous micropores embedded into the crosslinked mesoporous walls. As a result, the obtained carbon material with a unique sandwich‐like structure has a relatively high specific surface (1235 m² g^?1), large pore volume (1.30 cm³ g^?1), and appropriate pore size distribution. These merits lead to a comparably high specific capacitance of 274.8 F g^?1 at 0.2 A g^?1 and satisfying rate performance (87.7 % retention from 1 to 20 A g^?1). More importantly, the symmetric supercapacitor with two identical as‐prepared carbon samples shows a superior energy density of 18.47 Wh kg^?1 at a power density of 179.9 W kg^?1. The asymmetric supercapacitor based on as‐obtained carbon sample and its composite with manganese dioxide (MnO₂) can reach up to an energy density of 25.93 Wh kg^?1 at a power density of 199.9 W kg^?1. Therefore, these unique carbon material open a promising prospect for future development and utilization in the field of energy storage.     

Nitrogen‐Doped Hollow Amorphous Carbon Spheres@Graphitic Shells Derived from Pitch: New Structure Leads to Robust Lithium Storage

Nitrogen‐doped mesoporous hollow carbon spheres (NHCS) consisting of hybridized amorphous and graphitic carbon were synthesized by chemical vapor deposition with pitch as raw material. Treatment with HNO₃ vapor was performed to incorporate oxygen‐containing groups on NHCS, and the resulting NHCS‐O showed excellent rate capacity, high reversible capacity, and excellent cycling stability when tested as the anode material in lithium‐ion batteries. The NHCS‐O electrode maintained a reversible specific capacity of 616 mAh g^?1 after 250 cycles at a current rate of 500 mA g^?1, which is an increase of 113 % compared to the pristine hollow carbon spheres. In addition, the NHCS‐O electrode exhibited a reversible capacity of 503 mAh g^?1 at a high current density of 1.5 A g^?1. The superior electrochemical performance of NHCS‐O can be attributed to the hybrid structure, high N and O contents, and rich surface defects.     

Perovskite SrCo0.9Nb0.1O3−δ as an Anion‐Intercalated Electrode Material for Supercapacitors with Ultrahigh Volumetric Energy Density

We have synthesized and characterized perovskite‐type SrCo_0.9Nb_0.1O_3−δ (SCN) as a novel anion‐intercalated electrode material for supercapacitors in an aqueous KOH electrolyte, demonstrating a very high volumetric capacitance of about 2034.6 F cm⁻³ (and gravimetric capacitance of ca. 773.6 F g⁻¹) at a current density of 0.5 A g⁻¹ while maintaining excellent cycling stability with a capacity retention of 95.7 % after 3000 cycles. When coupled with an activated carbon (AC) electrode, the SCN/AC asymmetric supercapacitor delivered a specific energy density as high as 37.6 Wh kg⁻¹ with robust long‐term stability.     

The loading of polyoxometalates compound on a biomass derived N-doped mesoporous carbon matrix,a composite material for electrical energy storage

Abstract

A polyoxometalate (POM)-based composite material (NiPW₁₂NP/NMC) was synthesized, in which the nanoparticle of a POM compound (NiPW₁₂NP) distributes on orange juice derived nitrogen doped mesoporous carbon matrix (NMC) homogenously. When employed as a cathode material, NiPW₁₂NP/NMC exhibits high specific capacitance, remarkable rate capability and long-term stability. When the current density is 4?A·g^?1, a specific capacitance as high as 547 F·g^?1 is achieved by NiPW₁₂NP/NMC. With NiPW₁₂NP/NMC serving as cathode and MnO₂ acting as anode, a high performance asymmetric supercapacitor is assembled, which possesses a high energy density of 10.88?Wh·kg^?1 at 0.64?kW·kg^?1. It also shows a good rate capability, when the current density increases from 4 to 12?A·g^?1, its specific capacitance decreases from 113 to 88 F·g^?1, with 77.9% capacitance retention. After 5000 cycles charge-discharge experiments, 92.8% of its capacitance can be maintained, which exhibits good stability.     

A Multi‐Wall Sn/SnO2@Carbon Hollow Nanofiber Anode Material for High‐Rate and Long‐Life Lithium‐Ion Batteries

Multi‐wall Sn/SnO₂@carbon hollow nanofibers evolved from SnO₂ nanofibers are designed and programable synthesized by electrospinning, polypyrrole coating, and annealing reduction. The synthesized hollow nanofibers have a special wire‐in‐double‐wall‐tube structure with larger specific surface area and abundant inner spaces, which can provide effective contacting area of electrolyte with electrode materials and more active sites for redox reaction. It shows excellent cycling stability by virtue of effectively alleviating pulverization of tin‐based electrode materials caused by volume expansion. Even after 2000 cycles, the wire‐in‐double‐wall‐tube Sn/SnO₂@carbon nanofibers exhibit a high specific capacity of 986.3 mAh g^?1 (1 A g^?1) and still maintains 508.2 mAh g^?1 at high current density of 5 A g^?1. This outstanding electrochemical performance suggests the multi‐wall Sn/SnO₂@ carbon hollow nanofibers are great promising for high performance energy storage systems.     

An Azine‐Linked Covalent Organic Framework: Synthesis,Characterization and Efficient Gas Storage

A azine‐linked covalent organic framework, COF‐JLU2, was designed and synthesized by condensation of hydrazine hydrate and 1,3,5‐triformylphloroglucinol under solvothermal conditions for the first time. The new covalent organic framework material combines permanent micropores, high crystallinity, good thermal and chemical stability, and abundant heteroatom activated sites in the skeleton. COF‐JLU2 possesses a moderate BET surface area of over 410 m² g^?1 with a pore volume of 0.56 cm³ g^?1. Specifically, COF‐JLU2 displays remarkable carbon dioxide uptake (up to 217 mg g^?1) and methane uptake (38 mg g^?1) at 273 K and 1 bar, as well as high CO₂/N₂ (77) selectivity. Furthermore, we further highlight that it exhibits a higher hydrogen storage capacity (16 mg g^?1) than those of reported COFs at 77 K and 1 bar.     

CNT@Fe3O4@C Coaxial Nanocables: One‐Pot,Additive‐Free Synthesis and Remarkable Lithium Storage Behavior

By using carbon nanotubes (CNTs) as a shape template and glucose as a carbon precursor and structure‐directing agent, CNT@Fe₃O₄@C porous core/sheath coaxial nanocables have been synthesized by a simple one‐pot hydrothermal process. Neither a surfactant/ligand nor a CNT pretreatment is needed in the synthetic process. A possible growth mechanism governing the formation of this nanostructure is discussed. When used as an anode material of lithium‐ion batteries, the CNT@Fe₃O₄@C nanocables show significantly enhanced cycling performance, high rate capability, and high Coulombic efficiency compared with pure Fe₂O₃ particles and Fe₃O₄/CNT composites. The CNT@Fe₃O₄@C nanocables deliver a reversible capacity of 1290 mA h g^?1 after 80 cycles at a current density of 200 mA g^?1, and maintain a reversible capacity of 690 mA h g^?1 after 200 cycles at a current density of 2000 mA g^?1. The improved lithium storage behavior can be attributed to the synergistic effect of the high electronic conductivity support and the inner CNT/outer carbon buffering matrix.     

Supercritical Carbon Dioxide Assisted Deposition of Fe3O4 Nanoparticles on Hierarchical Porous Carbon and Their Lithium‐Storage Performance

A composite of highly dispersed Fe₃O₄ nanoparticles (NPs) anchored in three‐dimensional hierarchical porous carbon networks (Fe₃O₄/3DHPC) as an anode material for lithium‐ion batteries (LIBs) was prepared by means of a deposition technique assisted by a supercritical carbon dioxide (scCO₂)‐expanded ethanol solution. The as‐synthesized Fe₃O₄/3DHPC composite exhibits a bimodal porous 3D architecture with mutually connected 3.7 nm mesopores defined in the macroporous wall on which a layer of small and uniform Fe₃O₄ NPs was closely coated. As an anode material for LIBs, the Fe₃O₄/3DHPC composite with 79 wt % Fe₃O₄ (Fe₃O₄/3DHPC‐79) delivered a high reversible capacity of 1462 mA h g^?1 after 100 cycles at a current density of 100 mA g^?1, and maintained good high‐rate performance (728, 507, and 239 mA h g^?1 at 1, 2, and 5 C, respectively). Moreover, it showed excellent long‐term cycling performance at high current densities, 1 and 2 A g^?1. The enhanced lithium‐storage behavior can be attributed to the synergistic effect of the porous support and the homogeneous Fe₃O₄ NPs. More importantly, this straightforward, highly efficient, and green synthetic route will definitely enrich the methodologies for the fabrication of carbon‐based transition‐metal oxide composites, and provide great potential materials for additional applications in supercapacitors, sensors, and catalyses.     

In Situ Growth of MnO2 Nanosheets on N‐Doped Carbon Nanotubes Derived from Polypyrrole Tubes for Supercapacitors

Nitrogen‐doped porous carbon nanotubes@MnO₂ (N‐CNTs@MnO₂) nanocomposites are prepared through the in situ growth of MnO₂ nanosheets on N‐CNTs derived from polypyrrole nanotubes (PNTs). Benefiting from the synergistic effects between N‐CNTs (high conductivity and N doping level) and MnO₂ nanosheets (high theoretical capacity), the as‐prepared N‐CNTs@MnO₂‐800 nanocomposites show a specific capacitance of 219 F g^?1 at a current density of 1.0 A g^?1, which is higher than that of pure MnO₂ nanosheets (128 F g^?1) and PNTs (42 F g^?1) in 0.5 m Na₂SO₄ solution. Meanwhile, the capacitance retention of 86.8 % (after 1000 cycles at 10 A g^?1) indicates an excellent electrochemical performance of N‐CNTs@MnO₂ prepared in this work.     

Preparation of Li2SnO3 and its application in lithium‐ion batteries

Tin‐based oxide Li₂SnO₃ has been synthesized by a hydrothermal route as negative material for lithium‐ion batteries. The microstructure and electrochemical properties of the as‐synthesized materials were investigated by some characterizations means and electrochemical measurements. The as‐synthesized Li₂SnO₃ is a porous rod, which is composed of many uniform and regular nano‐flakes with a size of 50–60 nm. Li₂SnO₃ also displays an electrochemical performance with high capacity and good cycling stability (510.2 mAh g^?1 after 50 cycles at a current density of 60 mA g^?1 between 0.0 V and 2.0 V verusus Li/Li⁺). Copyright © 2013 John Wiley & Sons, Ltd.     

Towards Highly Stable Storage of Sodium Ions: A Porous Na3V2(PO4)3/C Cathode Material for Sodium‐Ion Batteries

A porous Na₃V₂(PO₄)₃ cathode material coated uniformly with a layer of approximately 6 nm carbon has been synthesized by the sol–gel method combined with a freeze‐drying process. The special porous morphology and structure significantly increases the specific surface area of the material, which greatly enlarges the contact area between the electrode and electrolyte, and consequently supplies more active sites for sodium ions. When employed as a cathode material of sodium‐ion batteries, this porous Na₃V₂(PO₄)₃/C exhibits excellent rate performance and cycling stability; for instance, it shows quite a flat potential plateau at 3.4 V in the potential window of 2.7–4.0 V versus Na⁺/Na and delivers an initial capacity as high as 118.9 and 98.0 mA h g^?1 at current rates of 0.05 and 0.5 C, respectively, and after 50 cycles, a good capacity retention of 92.7 and 93.6 % are maintained. Moreover, even when the discharge current density is increased to 5 C (590 mA g^?1), an initial capacity of 97.6 mA h g^?1 can still be achieved, and an exciting capacity retention of 88.6 % is obtained after 100 cycles. The good cycle performance, excellent rate capability, and moreover, the low cost of Na₃V₂(PO₄)₃/C suggest that this material is a promising cathode for large‐scale sodium‐ion rechargeable batteries.     

Preparation and Electrochemical Performance of Li[Ni1/3Co1/3Mn1/3]O2 Synthesized Using Li2CO3 as Template

Porous structure Li[Ni_1/3Co_1/3Mn_1/3]O₂ has been synthesized via a facile carbonate co‐precipitation method using Li₂CO₃ as template and lithium‐source. The physical and electrochemical properties of the materials were examined by many characterizations including TGA, XRD, SEM, EDS, TEM, BET, CV, EIS and galvanostatic charge‐discharge cycling. The results indicate that the as‐synthesized materials by this novel method own a well‐ordered layered structure α‐NaFeO₂ [space group: R‐3m(166)], porous morphology, and an average primary particle size of about 150 nm. The porous material exhibits larger specific surface area and delivers a high initial capacity of 169.9 mAh·g^?1 at 0.1 C (1 C=180 mA·g^?1) between 2.7 and 4.3 V, and 126.4, 115.7 mAh·g^?1 are still respectively reached at high rate of 10 C and 20 C. After 100 charge‐discharge cycles at 1 C, the capacity retention is 93.3%, indicating the excellent cycling stability.     

BCN: A Graphene Analogue with Remarkable Adsorptive Properties

A new analogue of graphene containing boron, carbon and nitrogen (BCN) has been obtained by the reaction of high‐surface‐area activated charcoal with a mixture of boric acid and urea at 900 °C. X‐ray photoelectron spectroscopy and electron energy‐loss spectroscopy reveal the composition to be close to BCN. The X‐ray diffraction pattern, high‐resolution electron microscopy images and Raman spectrum indicate the presence of graphite‐type layers with low sheet‐to‐sheet registry. Atomic force microscopy reveals the sample to consist of two to three layers of BCN, as in a few‐layer graphene. BCN exhibits more electrical resistivity than graphene, but weaker magnetic features. BCN exhibits a surface area of 2911 m² g^?1, which is the highest value known for a B_xC_yN_z composition. It exhibits high propensity for adsorbing CO₂ (≈100 wt %) at 195 K and a hydrogen uptake of 2.6 wt % at 77 K. A first‐principles pseudopotential‐based DFT study shows the stable structure to consist of BN₃ and NB₃ motifs. The calculations also suggest the strongest CO₂ adsorption to occur with a binding energy of 3.7 kJ mol^?1 compared with 2.0 kJ mol^?1 on graphene.     

Microwave‐Induced In Situ Synthesis of Zn2GeO4/N‐Doped Graphene Nanocomposites and Their Lithium‐Storage Properties

Zn₂GeO₄/N‐doped graphene nanocomposites have been synthesized through a fast microwave‐assisted route on a large scale. The resulting nanohybrids are comprised of Zn₂GeO₄ nanorods that are well‐embedded in N‐doped graphene sheets by in situ reducing and doping. Importantly, the N‐doped graphene sheets serve as elastic networks to disperse and electrically wire together the Zn₂GeO₄ nanorods, thereby effectively relieving the volume‐expansion/contraction and aggregation of the nanoparticles during charge and discharge processes. We demonstrate that an electrode that is made of the as‐formed Zn₂GeO₄/N‐doped graphene nanocomposite exhibits high capacity (1463 mAh g^?1 at a current density of 100 mA g^?1), good cyclability, and excellent rate capability (531 mAh g^?1 at a current density of 3200 mA g^?1). Its superior lithium‐storage performance could be related to a synergistic effect of the unique nanostructured hybrid, in which the Zn₂GeO₄ nanorods are well‐stabilized by the high electronic conduction and flexibility of N‐doped graphene sheets. This work offers an effective strategy for the fabrication of functionalized ternary‐oxide‐based composites as high‐performance electrode materials that involve structural conversion and transformation.     

Fluorine‐Doped Fe2O3 as High Energy Density Electroactive Material for Hybrid Supercapacitor Applications

Nanostructured α‐Fe₂O₃ with and without fluorine substitution were successfully obtained by a green route, that is, microwave irradiation. The hematite phase materials were evaluated as a high‐performance electrode material in a hybrid supercapacitor configuration along with activated carbon (AC). The presence of fluorine was confirmed through X‐ray photoelectron spectroscopy and transmission electron microscopy. Fluorine‐doped Fe₂O₃ (F‐Fe₂O₃) exhibits an enhanced pseudocapacitive performance compared to that of the bare hematite phase. The F‐Fe₂O₃/AC cell delivered a specific capacitance of 71 F g^?1 at a current density of 2.25 A g^?1 and retained approximately 90 % of its initial capacitance after 15 000 cycles. Furthermore, the F‐Fe₂O₃/AC cell showed a very high energy density of about 28 W h kg^?1 compared to bare hematite phase (～9 W h kg^?1). These data clearly reveal that the electrochemical performance of Fe₂O₃ can be improved by fluorine doping, thereby dramatically improving the energy density of the system.     

Template‐Free Synthesis of Hierarchical Vanadium‐Glycolate Hollow Microspheres and Their Conversion to V2O5 with Improved Lithium Storage Capability

Nanosheet‐assembled hierarchical V₂O₅ hollow microspheres are successfully obtained from V‐glycolate precursor hollow microspheres, which in turn are synthesized by a simple template‐free solvothermal method. The structural evolution of the V‐glycolate hollow microspheres has been studied and explained by the inside‐out Ostwald‐ripening mechanism. The surface morphologies of the hollow microspheres can be controlled by varying the mixture solution and the solvothermal reaction time. After calcination in air, hierarchical V₂O₅ hollow microspheres with a high surface area of 70 m² g^?1 can be obtained and the structure is well preserved. When evaluated as cathode materials for lithium‐ion batteries, the as‐prepared hierarchical V₂O₅ hollow spheres deliver a specific discharge capacity of 144 mA h g^?1 at a current density of 100 mA g^?1, which is very close to the theoretical capacity (147 mA h g^?1) for one Li⁺ insertion per V₂O₅. In addition, excellent rate capability and cycling stability are observed, suggesting their promising use in lithium‐ion batteries.