Conformational Analysis of 1,2‐Di‐O‐Octanoyl‐Ethylene‐Glycerol During Aggregation

Conformational analysis of 1,2‐di‐O‐octanoyl‐ethylene‐glycerol during aggregation by 600 MHz ¹H NMR is described. In monomeric states, 1,2‐di‐O‐octanoyl‐ethylene‐glycerol exists in 75% anti‐conformer and 25% gauche‐conformer. The first critical micelle concentration of 1,2‐di‐O‐octanoyl‐ethylene‐glycerol is calculated to be 4.5 mM. In micellar states, 1,2‐di‐O‐octanoyl‐ethylene‐glycerol exists in 25% anti‐conformer and 75%) gauche‐conformer. When the concentration is greater than 10 mM, 1,2‐di‐O‐octanoyl‐ethylene‐glycerol probably aggregates to become the larger micelle, micelle II. In the second micellar state, 1,2‐di‐O‐octanoylethylene‐glycerol only exists in gauche‐conformer.     

Kinetics and Protein‐Inhibitor Docking Studies of Enantiomers of exo‐2‐Norbornyl‐N‐n‐butylcarbamates as Pseudomonas Lipase Inhibitors to Probe the Enantioselectivity of the Enzyme

The Pseudomonas species lipase inhibition shows enantioselectivity for R‐enantiomer over S‐enantiomer of exo‐2‐norbornyl‐N‐n‐butylcarbamates. R‐, S‐, and racemic‐exo‐2‐norbornyl‐N‐n‐butylcarbamates are all characterized as pseudo substrate inhibitors of the enzyme. Thus, the mechanism for Pseudomonas species lipase‐catalyzed hydrolysis of the inhibitor is formation of the first enzyme‐inhibitor Michaelis complex via nucleophilic attack of the active site serine to the inhibitor (K_i step) then formation of the butylcarbamyl enzyme intermediate from this complex (k₂ step). Comparison of bimolecular rate constants (k_i = k₂ / K_i) of the inhibitors indicates that R‐enantiomer is 1.8 times more potent than S‐enantiomer. Thus, Pseudomonas species lipase shows enantioselectivity of 1.8 for R‐exo‐2‐norbornyl‐N‐n‐butyl‐carbamate over S‐exo‐2‐norbornyl‐N‐n‐butylcarbamate. Protein‐ligand interaction studies on both enantiomers of exo‐2‐norbornyl‐N‐n‐butylcarbamate as inhibitors of Pseudomonas species lipase using AutoDock suggest that R‐enantiomer binds more tightly into the active site of the enzyme than S‐enantiomer. The norbornyl ring of S‐exo‐2‐norbornyl‐N‐n‐butylcarbamate is repulsive to Ser 82 and His 251 of the catalytic triad as well as to Met 16 of the oxyanion hole. These repulsions may create few unfavorable interactions between S‐exo‐2‐norbornyl‐N‐n‐butylcarbamate and the enzyme and make this inhibitor a less potent one.     

Novel block–comb/graft copolymers with the macromonomer strategy and anionic polymerization

The following block–comb/graft copolymers of styrene (S), isoprene (I), and butadiene (B)—PS‐b‐(PB‐g‐PB), PS‐b‐(PB‐g‐PB)‐b‐PS, (PB‐g‐PB)‐b‐P2VP, (PS‐g‐PB)‐b‐(PI‐g‐PS), (PS‐g‐PB)‐b‐(PI‐g‐PS)‐b‐(PB‐g‐PI), (PS‐g‐PB)‐b‐(PI‐g‐PS)‐b‐(PB‐g‐PI)‐b‐(PI‐g‐PS)‐b‐(PS‐g‐PB), and (PS)₂(PB‐g‐PB) [where PS is polystyrene, PB is polybutadiene, P2VP is poly(2‐vinylpyridine) (2VP), and PI is polyisoprene]—were synthesized with the macromonomer strategy and anionic polymerization high‐vacuum techniques. The synthetic approach involves the synthesis and block copolymerization of styrenic macromonomers in situ without isolation. The prepared samples were characterized by size exclusion chromatography with a differential refractometer detector, size exclusion chromatography with a two‐angle laser light scattering detector, and NMR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4040–4049, 2005     

A Concise and Highly Enantioselective Total Synthesis of (+)‐anti‐ and (−)‐syn‐Mefloquine Hydrochloride: Definitive Absolute Stereochemical Assignment of the Mefloquines

A concise asymmetric (>99:1 e.r.) total synthesis of (+)‐anti‐ and (?)‐syn‐mefloquine hydrochloride from a common intermediate is described. The key asymmetric transformation is a Sharpless dihydroxylation of an olefin that is accessed in three steps from commercially available materials. The Sharpless‐derived diol is converted into either a trans or cis epoxide, and these are subsequently converted into (+)‐anti‐ and (?)‐syn‐mefloquine, respectively. The synthetic (+)‐anti‐ and (?)‐syn‐mefloquine samples were derivatized with (S)‐(+)‐mandelic acid tert‐butyldimethylsilyl ether, and a crystal structure of each derivative was obtained. These are the first X‐ray structures for mefloquine derivatives that were obtained by coupling to a known chiral, nonracemic compound, and provide definitive confirmation of the absolute stereochemistry of (+)‐anti‐ as well as (?)‐syn‐mefloquine.     

S‐endo‐2‐Norbornyl‐N‐n‐butylcarbamate as a Potential Pseudomonas Lipase Inhibitor to Probe the Enantioselectivity of the Enzyme by Kinetic and Molecular Docking Evaluation

Obesity is a complex health issue and it can cause many health and social problems. Previous studies reported that lipase is a main target for obesity treatment. We synthesized R‐exo‐2‐norbornyl‐N‐n‐butylcarbamate and S‐exo‐2‐norbornyl‐N‐n‐butylcarbamate as potential pseudomonas lipase inhibitors to probe the enantioselectivity of the enzyme and demonstrated that R‐exo‐2‐norbornyl‐N‐n‐butylcarbamate had better enzyme enantioselectivity, ki and the docking model with Pseudomonas species lipase in our previous studies. In this article, we reported the property of the Pseudomonas species lipase inhibitors, R‐and S‐endo‐2‐norbornyl‐N‐n‐butylcarbamate and compared the docking models of these two compounds with R‐ and S‐exo‐2‐norbornyl‐N‐n‐butylcarbamates by AutoDock. We found that S‐endo‐2‐norbornyl‐N‐n‐butylcarbamate has the best enantioselectivity, ki and docking model and this study could provide useful information about enzyme enantioselectivity for the development of Pseudomonas species lipase inhibitors for obesity treatment.     

Ruthenium Lewis Acid‐Catalyzed Asymmetric Diels–Alder Reactions: Reverse‐Face Selectivity for α,β‐Unsaturated Aldehydes and Ketones

Acrolein, methacrolein, methyl vinyl ketone, ethyl vinyl ketone, 3‐methyl‐3‐en‐2‐one, and divinyl ketone were coordinated to a cationic cyclopentadienyl ruthenium(II) Lewis acid incorporating the electron‐poor bidentate BIPHOP–F ligand. Analysis by NOESY and ROESY NMR techniques allowed the determination of conformations of enals and enones present in solution in CD₂Cl₂. The results were compared to solid‐state structures and to the facial selectivities of catalytic asymmetric Diels–Alder reactions with cyclopentadiene. X‐Ray structures of four Ru‐enal and Ru‐enone complexes show the α,β‐unsaturated C=O compounds to adopt an anti‐s‐trans conformation. In solution, enals assume both anti‐s‐trans and anti‐s‐cis conformations. An additional conformation, syn‐s‐trans, is present in enone complexes. Enantioface selectivity in the cycloaddition reactions differs for enals and enones. Reaction products indicate enals to react exclusively in the anti‐s‐trans conformation, whereas with enones, the major product results from the syn‐s‐trans conformation. The alkene in s‐cis conformations, while present in solution, is shielded and cannot undergo cycloaddition. A syn‐s‐trans conformation is found in the solid state of the bulky 6,6‐dimethyl cyclohexanone‐Ru(II) complex. The X‐ray structure of divinyl ketone is unique in that the Ru(II) center binds the enone via a η² bond to one of the alkene moieties. In solution, coordination to Ru–C=O oxygen is adopted. A comparison of facial preference is also made to the corresponding indenyl Lewis acids.     

Sulfur Ylide Promoted Synthesis of N‐Protected Aziridines: A Combined Experimental and Computational Approach

A range of N‐protected aziridines [N‐Tosyl (N‐Ts), N‐2‐trimethylsilylethanesulfonamide (N‐SES), N‐tert‐butoxycarbonylamido (N‐Boc), and N‐o‐nitrobenzenesulfonamide (oNs)] were prepared in moderate to good yield and with high enantiomeric excess of both isomers starting from N‐protected imines, using a sulfonium salt derived from Eliel’s oxathiane. The diastereoselectivities of the reactions are influenced by the imine N‐protecting group, the imine substituent, and the sulfide structure. An unusual cis selectivity was observed in the formation of N‐tosyl‐2‐phenyl‐3‐tert‐butylaziridine and N‐o‐trimethylsilylethanesulfonamide‐2‐phenyl‐3‐tert‐butylaziridine, which was explained by using computational models. The analysis suggests that betaine formation in the case of N‐tosyl‐tert‐butylaldimine aziridination using oxathiane benzyl sulfonium ylide 1 ′ is reversible and that the selectivity is determined at the rotation step, which is unusual for semistabilized ylide aziridination. We have shown herein that the steric bulk of an imine substituent, in combination with a sterically demanding sulfonium ylide, can also affect the reversibility of the reaction. This is the first example of this sort involving aziridinations using semistabilized ylides.     

In situ synthesis of ABA triblock copolymer nanoparticles by seeded RAFT polymerization: Effect of the chain length of the third a block on the triblock copolymer morphology

Synthesis of the ABA triblock copolymer nanoparticles of poly(N,N‐dimethylacrylamide)‐block‐polystyrene‐block‐poly(N,N‐dimethylacrylamide) (PDMA‐b‐PS‐b‐PDMA) by seeded RAFT polymerization is performed, and the effect of the introduced third poly(N,N‐dimethylacrylamide) (PDMA) block on the size and morphology of the PDMA‐b‐PS‐b‐PDMA triblock copolymer nanoparticles is investigated. This seeded RAFT polymerization affords the in situ synthesis of the PDMA‐b‐PS‐b‐PDMA core‐corona nanoparticles, in which the middle solvophobic PS block forms the compacted core, and the first solvophilic PDMA block and the introduced third PDMA block form the solvated complex corona. During the seeded RAFT polymerization, the introduced third PDMA block extends, and the molecular weight of the PDMA‐b‐PS‐b‐PDMA triblock copolymer linearly increases with the monomer conversion. It is found that, the size of the PS core in the PDMA‐b‐PS‐b‐PDMA triblock copolymer core‐corona nanoparticles is almost equal to that in the precursor of the poly(N,N‐dimethylacrylamide)‐block‐polystyrene diblock copolymer core‐corona nanoparticles and it keeps constant during the seeded RAFT polymerization, and whereas the introduction of the third PDMA block leads to a crowded complex corona on the PS core. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1777–1784     

Poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) Modification via Organocatalyzed Atom Transfer Radical Polymerization

To address the challenge of metal contamination, a “graft from” approach via organocatalyzed atom transfer radical polymerization (O‐ATRP) is developed to synthesize poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) (P(VDF‐co‐CTFE)) graft copolymers. N‐phenylphenothiazine is utilized as a model organic photoredox catalyst for catalyzing the (co)polymerization of methyl methacrylate (MMA), methacrylate (MA), and n‐butyl acrylate (BA). By employing this technique, high temporal control of polymerization and graft content are achieved. A series of P(VDF‐co‐CTFE)‐g‐PMMA, P(VDF‐co‐CTFE)‐g‐PMA, and P(VDF‐co‐CTFE)‐g‐PBA is prepared under mild conditions. The resultant graft copolymer can be used as macroinitiator to re‐initiate O‐ATRP to synthesize P(VDF‐co‐CTFE)‐g‐(PMMA‐b‐PMA), which might exhibit the potential application as novel dielectric material.     

Catalytic Asymmetric Mannich‐Type Reaction Enabled by Efficient Dienolization of α,β‐Unsaturated Pyrazoleamides†

(E)‐α,β‐Unsaturated pyrazoleamides undergo facile dienolization to furnish copper(I)‐(1Z,3Z)‐dienolates as the major in the presence of a copper(I)‐(R)‐DTBM‐SEGPHOS catalyst and Et₃N, which react with aldimines to afford syn‐vinylogous products as the major diastereoisomers in high regio‐ and enantioselectivities. In some cases, the diastereoselectivity is low, possibly due to the low ratio of copper(I)‐(1Z,3Z)‐dienolates to copper(I)‐(1Z,3E)‐dienolates. (Z)‐Allylcopper(I) species is proposed as effective intermediates, which may form an equilibrium with copper(I)‐(1Z,3Z)‐dienolates. Interestingly, the present methodology is a nice complement to our previous report, in which (E)‐β,γ‐unsaturated pyrazoleamides were employed as the prenucleophiles in the copper(I)‐catalyzed asymmetric vinylogous Mannich‐Type reaction and anti‐vinylogous products were obtained. In the previous reaction, copper(I)‐ (1Z,3E)‐dienolates were generated through α‐deprotonation, which might form an equilibrium with (E)‐allylcopper(I) species. Therefore, it is realized in the presence of a copper(I) catalyst that (E)‐α,β‐unsaturated pyrazoleamides lead to syn‐products and (E)‐β,γ‐unsaturated pyrazoleamides lead to anti‐products. Finally, by use of (E)‐β,γ‐unsaturated pyrazoleamide, (E)‐α,β‐unsaturated pyrazoleamide, (R)‐DTBM‐SEGPHOS, and (S)‐DTBM‐SEGPHOS, the stereodivergent synthesis of all four stereoisomers is successfully carried out. Then by following a three‐step reaction sequence, all four stereoisomers of N‐Boc‐2‐Ph‐3‐Me‐piperidine are synthesized in good yields, which potentially serve as common structure units in pharmaceutically active compounds.     

RAFT‐mediated batch emulsion polymerization of styrene using poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] trithiocarbonate as both surfactant and macro‐RAFT agent

Poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] trithiocarbonate, which contains the reactive trithiocarbonate group and the appending surface‐active groups, is used as both surfactant and macromolecular reversible addition‐fragmentation chain transfer (macro‐RAFT) agent in batch emulsion polymerization of styrene. Under the conditions at high monomer content of ～20 wt % and with the molecular weight of the macro‐RAFT agent ranging from 4.0 to 15.0 kg/mol, well‐controlled batch emulsion RAFT polymerization initiated by the hydrophilic 2‐2′‐azobis(2‐methylpropionamidine) dihydrochloride is achieved. The polymerization leads to formation of nano‐sized colloids of the poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride]‐b‐ polystyrene‐b‐poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] triblock copolymer. The colloids generally have core‐shell structure, in which the hydrophilic block forms the shell and the hydrophobic block forms the core. The molecular weight of the triblock copolymer linearly increases with increase in the monomer conversion, and the values are well‐consistent with the theoretical ones. The molecular weight polydispersity index of the triblock copolymer is below 1.2 at most cases of polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of the Branched Trisaccharide L‐Glycero‐α‐D‐manno‐heptopyranosyl‐(1 → 3)‐ [β‐D‐glucopyranosyl‐(1 → 4)]‐L‐glycero‐α‐D‐manno‐heptopyranose,Protected to Allow Flexible Access to Neisseria and Haemophilus LPS Inner Core Structures

Abstract

An efficient synthesis of the protected branched trisaccharide (2′S,3′S)‐(7‐O‐benzyl‐6‐O‐chloroacetyl‐3,4‐O‐(2′,3′‐dimethoxybutane‐2′,3′‐diyl)‐2‐O‐p‐methoxybenzyl‐L‐glycero‐α‐D‐manno‐heptopyranosyl)‐(1 → 3)‐[(2,3,4,6‐tetra‐O‐benzoyl‐β‐D‐glucopyranosyl)‐(1 → 4)]‐7‐O‐acetyl‐1,6‐anhydro‐2‐O‐benzyl‐L‐glycero‐β‐D‐manno‐heptopyranose, which is a key intermediate in the synthesis of inner core structures of Haemophilus and Neisseria LPSs, is described. The heptoses were formed by Grignard reactions using a benzyloxymethyl chloride or a commercial vinyl reagent. The anhydro bridge was formed by treatment of a 6‐OH methyl α‐heptoside precursor with FeCl₃. The protecting group pattern allows modifications at the 2‐, 3‐, 4‐, and 6‐positions of the second heptose moiety and also, after acetolysis of the anhydro bridge, elongation at the reducing end, all known alterations found in the bacterial LPSs.     

Anionic copolymerization of styrenic‐tipped macromonomers: A route to novel triblock–comb copolymers of styrene and isoprene

The following triblock–comb copolymers of isoprene (I) and styrene (S)—PS‐b‐(PI‐g‐PI)‐b‐PS, PS‐b‐[PI‐g‐(PI‐b‐PS)]‐b‐PS, and (PS‐g‐PS)‐b‐(PI‐g‐PI)‐b‐(PS‐g‐PS) (where PS is polystyrene and PI is polyisoprene)—with PS contents of 20–30% were synthesized with high‐vacuum techniques and the anionic copolymerization of styrenic‐tipped macromonomers with I and S. The macromonomers, prepared by the reaction of living PI or PS with 4‐(chlorodimethylsilyl) styrene, were used without isolation. Molecular characterization by size exclusion chromatography, size exclusion chromatography/two‐angle laser light scattering, and NMR spectroscopy indicated that the triblock–comb copolymers had high molecular and compositional homogeneity. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4030–4039, 2005     

A High－efficiency Preparation, Properties and Structure of （R, S ）－and （ S, S）－Pyrrolidine－2－carboxylic Acid 3,5－Dioxa－4－boracvclo.hepta [ 2,1－α; 3,4－α′] dinaphthalen－4－yl Esters

A highly-efficient preparative procedure for ( R, S )- and ( S, S)-pyrroHdine-2-carboxyHc acid 3,5-dioxa-4-boracyclohepta[2, 1-α ; 3,4-α′] dlnaphthalen-4-yl esters [ namely ( R, S )-BNBAP and (S, S )-BNBAP] is described and the crystal structure of (R, S )-BNBAP was obtained. The data indicate that ( R, S )-BNBAP is a spirocyclic inner borate salt with almost normal te-trahedral configuration. This structural form may be the basic reason for their high chemical, optical and thermodynamic sta-bility.     

NMR‐Structural Investigations of a β3‐Dodecapeptide with Proteinogenic Side Chains in Methanol and in Aqueous Solutions

The structural properties of an all‐β³‐dodecapeptide with the sequence H‐β‐HLys(N^ε‐CO(CH₂)₃‐S Acm)‐β‐HPhe‐β‐HTyr‐β‐HLeu‐β‐HLys‐β‐HSer‐β‐HLys‐β‐HPhe‐β‐HSer‐β‐HVal‐β‐HLys‐β‐HAla‐OH ( 1 ) have been studied by two‐dimensional homonuclear ¹H‐NMR and by CD spectroscopy. In MeOH solution, high‐resolution NMR spectroscopy showed that the β‐dodecapeptide forms an (M)‐3₁₄‐helix, and the CD spectrum corresponds to the pattern expected for an (M)‐3₁₄‐helical secondary structure. In aqueous solution, however, the peptide adopts a predominantly extended conformation without regular secondary‐structure elements, which is in agreement with the absence of the characteristic trough near 215 nm in the CD spectrum. The NMR and CD measurements with solutions of 1 in MeOH containing 3M urea further indicated that the peptide retains the regular secondary structural elements under these conditions, whereas, after addition of 40% (v/v) H₂O to the MeOH solution, the large ¹H‐chemical‐shift dispersion indicative of a defined spatial peptide fold was lost. The β³‐dodecapeptide is – so far – the longest β‐peptide shown to adopt a regular (M)‐3₁₄‐helix conformation in an organic solvent. The observation that the structure of this long β³‐peptide is not maintained in aqueous solution indicates that the (M)‐3₁₄‐fold is primarily stabilized by short‐range interactions.     

Preparation of β2‐Homotryptophan Derivatives for β‐Peptide Synthesis

In view of the prominent role of the 1H‐indol‐3‐yl side chain of tryptophan in peptides and proteins, it is important to have the appropriately protected homologs H‐β² HTrp OH and H‐β³ HTrp OH (Fig.) available for incorporation in β‐peptides. The β²‐HTrp building block is especially important, because β²‐amino acid residues cause β‐peptide chains to fold to the unusual 12/10 helix or to a hairpin turn. The preparation of Fmoc and Z β²‐HTrp(Boc) OH by Curtius degradation (Scheme 1) of a succinic acid derivative is described (Schemes 2–4). To this end, the (S)‐4‐isopropyl‐3‐[(N‐Boc‐indol‐3‐yl)propionyl]‐1,3‐oxazolidin‐2‐one enolate is alkylated with Br CH₂CO₂Bn (Scheme 3). Subsequent hydrogenolysis, Curtius degradation, and removal of the Evans auxiliary group gives the desired derivatives of (R)‐H β²‐HTrp OH (Scheme 4). Since the (R)‐form of the auxiliary is also available, access to (S)‐β²‐HTrp‐containing β‐peptides is provided as well.     

Relative Stability of closo‐closo,closo‐nido,and nido‐nido Macropolyhedral Boranes: The Role of Orbital Compatibility

The concept of orbital compatibility is used to explain the relative energies of different macropolyhedral structural patterns such as closo‐closo, closo‐nido, and nido‐nido. A large polyhedral borane condenses preferentially with a smaller polyhedron owing to orbital compatibility. Calculations carried out at the B3LYP/6‐31G* level show that the macropolyhedron closo(12)‐closo(6) is the most preferred structural pattern among the face‐sharing closo‐closo systems. The relative stabilities of four‐shared‐atom closo‐closo, three‐shared‐atom closo‐closo, three‐shared‐atom closo‐nido, edge‐sharing closo‐nido, and edge‐sharing nido‐nido structures are in accordance with the difference in the number of vertices of the individual polyhedra of the macropolyhedra. When the difference in the number of vertices of the individual polyhedra is large, the stability of the macropolyhedra is also large. Calculations further show that the orbital compatibility plays an important role in deciding the stability of the macropolyhedral boranes with more than two polyhedral units. The dependence of the orbital compatibility on the relative stability of the macropolyhedron varies with other factors such as inherent stability of the individual polyhedron and steric factors.     

Stereoselective Synthesis of 8‐Oxabicyclo[3.2.1]octane‐2,3,4,6,7‐pentols and Total Asymmetric Synthesis of 2,6‐Anhydrohepturonic Acid Derivatives and of β‐C‐manno‐Pyranosides Suitable for the Construction of (1→3)‐C,C‐Linked Trisaccharides

Enantiomerically pure (+)‐(1S,4S,5S,6S)‐6‐endo‐(benzyloxy)‐5‐exo‐{[(tert‐butyl)dimethylsilyl]oxy}‐7‐oxabicyclo[2.2.1]heptan‐2‐one ((+)‐ 5 ) and its enantiomer (−)‐ 5 , obtained readily from the Diels‐Alder addition of furan to 1‐cyanovinyl acetate, can be converted with high stereoselectivity into 8‐oxabicyclo[3.2.1]octane‐2,3,4,6,7‐pentol derivatives (see 23 – 28 in Scheme 2). A precursor of them, (1R,2S,4R,5S,6S,7R,8R)‐7‐endo‐(benzyloxy)‐8‐exo‐hydroxy‐3,9‐dioxatricyclo[4.2.1.0^2,4]non‐5‐endo‐yl benzoate ((−)‐ 19 ), is transformed into (1R,2R,5S, 6S,7R,8S)‐6‐exo,8‐endo‐bis(acetyloxy)‐2‐endo‐(benzyloxy)‐4‐oxo‐3,9‐dioxabicyclo[3.3.1]non‐7‐endo‐yl benzoate ((−)‐ 43 ) (see Scheme 5). The latter is the precursor of several protected 2,6‐anhydrohepturonic acid derivatives such as the diethyl dithioacetal (−)‐ 57 of methyl 3,5‐di‐O‐acetyl‐2,6‐anhydro‐4‐O‐benzoyl‐D ‐glycero‐D ‐galacto‐hepturonate (see Schemes 7 and 8). Hydrolysis of (−)‐ 57 provides methyl 3,5‐di‐O‐acetyl‐2,6‐anhydro‐4‐O‐benzoyl‐D ‐glycero‐D ‐galacto‐hepturonate 48 that undergoes highly diastereoselective Nozaki‐Oshima condensation with the aluminium enolate resulting from the conjugate addition of Me₂AlSPh to (1S,5S,6S,7S)‐7‐endo‐(benzyloxy)‐6‐exo‐{[(tert‐butyl)dimethylsilyl]oxy}‐8‐oxabicyclo[3.2.1]oct‐3‐en‐2‐one ((−)‐ 13 ) derived from (+)‐ 5 (Scheme 12). This generates a β‐C‐mannopyranoside, i.e., methyl (7S)‐3,5‐di‐O‐acetyl‐2,6‐anhydro‐4‐O‐benzoyl‐7‐C‐[(1R,2S,3R,4S,5R,6S,7R)‐6‐endo‐(benzyloxy)‐7‐exo‐{[(tert‐butyl)dimethylsilyl]oxy}‐4‐endo‐hydroxy‐2‐exo‐(phenylthio)‐8‐oxabicyclo[3.2.1]oct‐3‐endo‐yl]‐L ‐glycero‐D ‐manno‐heptonate ((−)‐ 70 ; see Scheme 12), that is converted into the diethyl dithioacetal (−)‐ 75 of methyl 3‐O‐acetyl‐2,6‐anhydro‐4,5‐dideoxy‐4‐C‐{[methyl (7S)‐3,5,7‐tri‐O‐acetyl‐2,6‐anhydro‐4‐O‐benzoyl‐L ‐glycero‐D ‐manno‐heptonate]‐7‐C‐yl}‐5‐C‐(phenylsulfonyl)‐L ‐glycero‐D ‐galacto‐hepturonate ( 76 ; see Scheme 13). Repeating the Nozaki‐Oshima condensation to enone (−)‐ 13 and the aldehyde resulting from hydrolysis of (−)‐ 75 , a (1→3)‐C,C‐linked trisaccharide precursor (−)‐ 77 is obtained.     

Controlled Self‐Assembly by Mono‐p‐sulfonatocalix[n]arenes and Bis‐p‐sulfonatocalix[n]arenes

The complexation‐induced critical aggregation concentrations of 1‐pyrenemethylaminium by mono‐p‐sulfonatocalix[n]arenes and bis‐p‐sulfonatocalix[n]arenes (n=4, 5) were systemically measured by fluorescence spectroscopy. In all cases, the complexation‐induced critical aggregation concentration decreases by about 3 times upon addition of p‐sulfonatocalix[n]arenes. However, the optimal molar ratios for the aggregation of 1‐pyrenemethylaminium by mono‐p‐sulfonatocalix[n]arenes and bis‐p‐sulfonatocalix[n]arenes are distinctly different: For mono‐p‐sulfonatocalix[n]arenes, the optimum mixing ratio for the aggregation of 1‐pyrenemethylaminium is 1:4 mono‐p‐sulfonatocalix[n]arenes/1‐pyrenemethylaminium, whereas only 2.5 molecules of 1‐pyrenemethylaminium can be bound by one cavity of bis‐p‐sulfonatocalix[n]arenes. The intermolecular complexation of mono‐p‐sulfonatocalix[n]arenes and bis‐p‐sulfonatocalix[n]arenes with 1‐pyrenemethylaminium led to the formation of two distinctly different nanoarchitectures, which were shown to be nanoscale vesicle and rod aggregates, respectively, by using dynamic laser scattering, TEM, and SEM. This behavior is also different from the fiber‐like aggregates with lengths of several micrometers that were formed by 1‐pyrenemethylaminium itself above its critical aggregation concentration. Furthermore, the obtained nanoaggregates exhibit benign water solubility, self‐labeled fluorescence, and, more importantly, temperature responsiveness.     

Formation of Core‐Shell‐Corona Micellar Complexes through Adsorption of Double Hydrophilic Diblock Copolymers into Core‐Shell Micelles

Summary: The complexation between polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles and poly(ethylene glycol)‐block‐poly(4‐vinyl pyridine) (PEG‐b‐P4VP) is studied, and a facile strategy is proposed to prepare core‐shell‐corona micellar complexes. Micellization of PS‐b‐PAA in ethanol forms spherical core‐shell micelles with PS block as core and PAA block as shell. When PEG‐b‐P4VP is added into the core‐shell micellar solution, the P4VP block is absorbed into the core‐shell micelles to form spherical core‐shell‐corona micellar complexes with the PS block as core, the combined PAA/P4VP blocks as shell and the PEG block as corona. A model is suggested to characterize the core‐shell‐corona micellar complexes.

Schematic formation of core‐shell‐corona (CSC) micellar complexes by adsorption of PEG‐b‐P4VP into core‐shell PS‐b‐PAA micelles.