Time‐Resolved Assembly of Cluster‐in‐Cluster {Ag12}‐in‐{W76} Polyoxometalates under Supramolecular Control

We report the time‐resolved supramolecular assembly of a series of nanoscale polyoxometalate clusters (from the same one‐pot reaction) of the form: [H_(10+m)Ag₁₈Cl(Te₃W₃₈O₁₃₄)₂]_n, where n=1 and m=0 for compound 1 (after 4 days), n=2 and m=3 for compound 2 (after 10 days), and n=∞ and m=5 for compound 3 (after 14 days). The reaction is based upon the self‐organization of two {Te₃W₃₈} units around a single chloride template and the formation of a {Ag₁₂} cluster, giving a {Ag₁₂}‐in‐{W₇₆} cluster‐in‐cluster in compound 1 , which further aggregates to cluster compounds 2 and 3 by supramolecular Ag‐POM interactions. The proposed mechanism for the formation of the clusters has been studied by ESI‐MS. Further, control experiments demonstrate the crucial role that TeO₃^2?, Cl^?, and Ag⁺ play in the self‐assembly of compounds 1 – 3 .     

Hydrogel Formation Using New L‐Lysine‐Based Low‐Molecular‐Weight Compounds with Positively Charged Pendant Chains

Low‐molecular‐weight compounds based on L ‐lysine with alkylpyridinium or ‐imidazolium groups have been synthesized and studied for their gelation behavior in H₂O. Most compounds formed gels below a concentration of 2.5 weight‐%, the pyridinium bromide 2a and the 1‐methyl‐1H‐imidazolium bromide 3 even at 0.1 weight‐%. The minimum gel concentration (MGC) necessary for hydrogelation increased with increasing length of the Lys N^α‐alkanoyl chain, but the gelation ability concomitantly decreased. Electron‐microscopic images demonstrated that these hydrogelators create a three‐dimensional network in H₂O by entanglement of self‐assembled nanofibers. A fluorescence study with 8‐anilinonaphthalene‐1‐sulfonic acid (ANS) proved that some hydrophobic aggregates are formed at hydrogelator concentrations below an MGC of less than 50 μM (0.004%). FT‐IR, ¹H‐NMR, and Fluorescence studies indicated that the driving forces for the self‐assembly into nanofibers are mainly hydrophobic interactions and H‐bonding between amide groups.     

Chiral Hexa‐ and Nonamethylene‐Bridged Bis(L‐Leu‐oxalamide) Gelators: The First Oxalamide Gels Containing Aggregates with a Chiral Morphology

Chiral amino acid‐ and amino alcohol‐oxalamides are well‐known as versatile and efficient gelators of various lipophilic and polar organic solvents and water. To further explore the capacity of the amino acid/oxalamide structural fragment as a gelation‐generating motif, the dioxalamide dimethyl esters 1₆Me and 1₉Me , and dicarboxylic acid 2₆OH / 2₉OH derivatives containing flexible methylene bridges with odd ( 9 ; n=7) and even ( 6 ; n=4) numbers of methylene groups were prepared. Their self‐assembly motifs and gelation properties were studied by using a number of methods (FTIR, ¹H NMR spectroscopy, CD, TEM, DSC, XRPD, molecular modeling, MMFF94, and DFT). In contrast to the previously studied chiral bis(amino acid or amino alcohol) oxalamide gelators, in which no chiral morphology was ever observed in the gels, the conformationally more flexible 1₆Me , 1₉Me , 2₆OH , and 2₉OH provide gelators that are capable of forming diverse aggregates of achiral and chiral morphologies, such as helical fibers, twisted tapes, nanotubules, straight fibers, and tapes, in some cases coexisting in the same gel sample. It is shown that the differential scanning calorimetry (DSC)‐determined gelation enthalpies could not be correlated with gelator and solvent clogP values. Spectroscopic results show that intermolecular hydrogen‐bonding between the oxalamide units provides the major and self‐assembly directing intermolecular interaction in the aggregates. Molecular modeling studies reveal that molecular flexibility of gelators due to the presence of the polymethylene bridges gives three conformations ( zz , p1 , and p2 ) close in energy, which could form oxalamide hydrogen‐bonded layers. The aggregates of the p1 and p2 conformations tend to twist due to steric repulsion between neighboring iBu groups at chiral centers. The X‐ray powder diffraction (XRPD) results of 1₆Me and 1₉Me xerogels prove the formation of p1 and p2 gel aggregates, respectively. The latter results explain the formation of gel aggregates with chiral morphology and also the simultaneous presence of aggregates of diverse morphology in the same gel system.     

Synthesis and self‐assembly morphologies of amphiphilic multiblock copolymers [poly(ethylene oxide)‐b‐polystyrene]n via trithiocarbonate‐embedded PEO macro‐RAFT agent

An amphiphilic multiblock copolymer [poly(ethylene oxide)‐b‐polystyrene]_n [(PEO‐b‐PS)_n] is synthesized by using trithiocarbonate‐embedded PEO as macro‐RAFT agent. PEO with four inserted trithiocarbonate (M_n = 9200 and M_w/M_n = 1.62) groups is prepared first by condensation of α, ω‐dihydroxyl poly(ethylene oxide) with S, S′‐Bis(α, α′‐dimethyl‐α″‐acetic acid)‐trithiocarbonate (BDATC) in the presence of pyridine, then a series of goal copolymers with different St units (varied from 25 to 218 per segment) are obtained by reversible addition‐fragmentation chain transfer (RAFT) polymerization. The synthesis process is monitored by size exclusion chromatography (SEC), ¹H NMR and FT‐IR. The self‐assembled morphologies of the copolymers are strongly dependent of the length of PS block chains when the chain length of PEO is fixed, some new morphologies as large leaf‐like aggregates (LLAs), large octopus‐like aggregates (LOAs), and coarse‐grain like micelles (CGMs) are observed besides some familiar aggregates as large compound vesicles (LCVs), lamellae and rods, and the effect of water content on the morphologies is also discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6071–6082, 2006     

Polymersome‐forming amphiphilic glycosylated polymers: Synthesis and characterization

Copper‐catalyzed azide‐alkyne cycloaddition (CuAAC) was used to prepare glycosylated polyethylene (PE)–poly(ethylene glycol) (PEG) amphiphilic block copolymers. The synthetic approach involves preparation of alkyne‐terminated PE‐b‐PEG followed by CuAAC reaction with different azide functionalized sugars. The alkyne‐terminated PE‐b‐PEG was prepared by etherification reaction between hydroxyl‐terminated PE‐b‐PEG (M_n ～ 875 g mol^?1) and propargyl bromide and azidoethyl glycosides were prepared by glycosylation of 2‐azidoethanol. Atmospheric pressure solids analysis probe‐mass spectrometry was used as a novel solid state characterization tool to determine the outcome of the CuAAC click reaction and end‐capping of PE‐b‐PEG by the azidoethyl glycoside group. The aqueous solution self‐assembly behavior of these amphiphilic glycosylated polymers was explored by TEM and dye solubilization studies. Carbohydrate‐bearing spherical aggregates with the ability to solubilize a hydrophobic dye were observed. The potential of these amphiphilic glycosylated polymers to self‐assemble via electro‐formation into giant carbohydrate‐bearing polymersomes was also investigated using confocal fluorescence microscopy. An initial bioactivity study of the carbohydrate‐bearing aggregates is furthermore presented. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5184–5193     

Capillary electrophoretic studies on quantum dots and histidine appended peptides self‐assembly

Herein, we designed four peptides appended with different numbers of histidine (His_n‐peptide). We launched a systematic investigation on quantum dots (QDs) and His_n‐peptide self‐assembly in solution using fluorescence coupled CE (CE‐FL). The results indicated that CE‐FL was a powerful method to probe how ligands interaction on the surface of nanoparticles. The self‐assembly of QDs and peptide was determined by the numbers of histidine. We also observed that longer polyhistidine tags (n ≤ 6) could improve the self‐assembly efficiency. Furthermore, the formation and separation of QD‐peptide assembly were also studied by CE‐FL inside a capillary. The total time for the mixing, self‐assembly, separation, and detection was less than 10 min. Our method greatly expands the application of CE‐FL in QDs‐based biolabeling and bioanalysis.     

Self‐Assembly of Imidazolium‐Based Surfactants in Magnetic Room‐Temperature Ionic Liquids: Binary Mixtures

The phase behaviour of binary mixtures of ionic surfactants (1‐alkyl‐3‐imidazolium chloride, C_nmimCl with n=14, 16 and 18) and imidazolium‐based ionic liquids (1‐alkyl‐3‐methylimidazolium tetrachloroferrate, C_nmimFeCl₄, with n=2 and 4) over a broad temperature range and the complete range of compositions is described. By using many complementary methods including differential scanning calorimetry (DSC), polarised microscopy, small‐angle neutron and X‐ray scattering (SANS/SAXS), and surface tension, the ability of this model system to support self‐assembly is described quantitatively and this behaviour is compared with common water systems. The existence of micelles swollen by the solvent can be deduced from SANS experiments and represent a possible model for aggregates, which has barely been considered for ionic‐liquid systems until now, and can be ascribed to the rather low solvophobicity of the surfactants. Our investigation shows that, in general, C_nmimCl is a rather weak amphiphile in these ionic liquids. The amphiphilic strength increases systematically with the length of the alkyl chain, as seen from the phase behaviour, the critical micelle concentration, and also the level of definition of the aggregates formed.     

Novel thermoresponsive fluorinated double‐hydrophilic poly{[N‐(2,2‐difluoroethyl)acrylamide]‐b‐[N‐(2‐fluoroethyl)acrylamide]} block copolymers

Novel thermoresponsive double‐hydrophilic fluorinated block copolymers were successfully synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization. Poly[N‐(2,2‐difluoroethyl)acrylamide] (P2F) was synthesized via RAFT polymerization of N‐(2,2‐difluoroethyl)acrylamide (M2F) using 2‐dodecylsulfanylthiocarbonylsulfanyl‐2‐methylpropionic acid (DMP) as the chain transfer agent (CTA) and 2,2′‐azobisisobutyronitrile (AIBN) as the initiator. The resulting P2F macroCTA was further chain extended with N‐(2‐fluoroethyl)acrylamide (M1F) to yield poly{[N‐(2,2‐difluoroethyl)acrylamide]‐b‐[N‐(2‐fluoroethyl)acrylamide]} (P2F‐b‐P1F) block copolymers with different lengths of the P1F block. Molecular weight and molecular weight distribution were determined by gel permeation chromatography. The average molecular weight (M_n) of the resulting polymers ranged from 2.9 × 10⁴ to 5.8 × 10⁴ depending on the length of the P1F block. The molecular weight distribution was low (M_w/M_n = 1.11–1.19). Turbidimetry by UV‐Visble (UV‐Vis) spectroscopy, dynamic light scattering, and in situ temperature‐dependent ¹H NMR measurements demonstrated that the P2F block underwent a thermal transition from hydrophilic to hydrophobic, which in turn induced self‐assembly from unimers to aggregates. Transmission electron microscopy studies demonstrated that polymeric aggregates formed from an aqueous solution of P2F‐b‐P1F at 60 °C were disrupted by cooling down to 20 °C and regenerated by heating to 60 °C. Temperature‐triggered release of a model hydrophobic drug, coumarin 102, was also demonstrated. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Understanding the catalytic activity of single‐chain polymeric nanoparticles in water

The structuring role of benzene‐1,3,5‐tricarboxamide (BTA) groups for the catalytic activity of single chain polymeric nanoparticles in water was investigated in the transfer hydrogenation of ketones. To this end, a set of segmented, amphiphilic copolymers was prepared, which comprised oligo(ethylene glycol) side chains to impart water solubility, BTA and/or lauryl side chains to induce hydrophobicity and diphenylphosphinostyrene (SDP) units in the middle part as a ligand to bind a ruthenium catalyst. All copolymers were obtained by reversible addition‐fragmentation chain transfer (RAFT) polymerization and showed low dispersities (M_w/M_n = 1.23–1.38) and controlled molecular weights (M_n = 44–28 kDa). A combination of circular dichroism (CD) spectroscopy and dynamic light scattering (DLS) showed that all copolymers fold into a single chain polymeric nanoparticles (SCPNs) as a result of the helical self‐assembly of the pendant BTA units and/or hydrophilic–hydrophobic phase separation. To create catalytic sites, RuCl₂(PPh₃)₃ was incorporated into the copolymers. The Cotton effects of the copolymers before and after Ru(II) loading were identical, indicating that the helical self‐assembly of the BTA units and the complexation of SDP ligands and Ru(II) occurs in an orthogonal manner. DLS revealed that after Ru(II) loading, SDP‐bearing copolymers retained their single chain character in water, while copolymers lacking SDP units clustered into larger aggregates. The Ru(II) loaded SCPNs were tested in the transfer hydrogenation of cyclohexanone. This study reveals that BTA induced stack formation is not crucial for SCPN formation and catalytic activity; SDP‐bearing copolymers folded by Ru(II) complexation and hydrophobic pendants suffice to provide hydrophobic, isolated reaction pockets around Ru(II) complexes. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 12–20     

Self‐Assembly of Fullerene‐Based Janus Particles in Solution: Effects of Molecular Architecture and Solvent

Two molecular Janus particles based on amphiphilic [60]fullerene (C₆₀) derivatives were designed and synthesized by using the regioselective Bingel–Hirsh reaction and the click reaction. These particles contain carboxylic acid functional groups, a hydrophilic fullerene (AC₆₀), and a hydrophobic C₆₀ in different ratios and have distinct molecular architectures: 1:1 (AC₆₀–C₆₀) and 1:2 (AC₆₀–2C₆₀). These molecular Janus particles can self‐assemble in solution to form aggregates with various types of micellar morphology. Whereas vesicular morphology was observed for both AC₆₀–C₆₀ and AC₆₀–2C₆₀ in tetrahydrofuran, in a mixture of N,N‐dimethylformamide (DMF)/water, spherical micelles and cylindrical micelles were observed for AC₆₀–C₆₀ and AC₆₀–2C₆₀, respectively. A mechanism of formation was tentatively proposed based on the effects of molecular architecture and solvent polarity on self‐assembly.     

Scrambled Self‐Assembly of Bacteriochlorophylls c and e in Aqueous Triton X‐100 Micelles

Bacteriochlorophyll (BChl) e was coassembled with BChl c in Triton X‐100 micelles in aqueous solutions. The Q_y absorption bands of the coaggregates were positioned between those of aggregates consisting solely of BChl c or e. The electronic absorption spectra of the coaggregates could not be reproduced by linear combinations of the spectra of the aggregates consisting solely of each pigment, but they were in line with the simulated spectra for the self‐aggregates in which both BChls were randomly distributed. These suggest that BChls c and e are not spatially separated; they are homogenously distributed over the self‐aggregates to give electronic spectra that are different from those of the aggregate consisting solely of each pigment. Deaggregation of the scrambled self‐aggregates by excess Triton X‐100 did not produce any spectral components assigned to an aggregate consisting solely of either BChl c or e. Acid‐induced decomposition of the scrambled aggregates showed different kinetics from those of the aggregates consisting solely of each pigment. These also support the homogeneous distribution of BChls c and e in the scrambled self‐aggregates. These results will be useful to investigate the major light‐harvesting antenna systems of green photosynthetic bacteria that contain two kinds of chlorosomal BChls.     

Surfactant effects on the reaction of 2‐(4‐cyanophenoxy)‐quinoxaline with hydroxide ion

A reaction of 2‐(4‐cyanophenoxy)quinoxaline 1 with hydroxide ion is accelerated by supramolecular aggregates of cetyltrialkylammonium chlorides (alkyl = Me, n‐Pr, and n‐Bu). In diluted surfactant solutions, with relatively high substrate concentration (7.0 × 10^?5 M), rate constants go through double rate maxima with increase in the surfactant concentration. The first rate maximum is ascribed to a reaction occurring in premicellar aggregates and the second to reaction in micelles. At low substrate concentration (7 × 10^?6 M), second‐order rate constants in the micellar pseudophase are dependent on the surfactant headgroup size, which is related to charge dispersion in the transition state. Nonmicellizing tri‐n‐octylmethylammonium ions (TOAMs) increase the reaction of 1 with hydroxide ion. The observed rate enhancements may be due to the formation of small, hydrophobic aggregates which bind the substrate and promote the nucleophilic substitution reaction. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 38: 510–515, 2006     

Tuning amphiphilicity/temperature‐induced self‐assembly and in‐situ disulfide crosslinking of reduction‐responsive block copolymers

New poly(ethylene oxide)‐based block copolymers (ssBCs) with a random copolymer block consisting of a reduction‐responsive disulfide‐labeled methacrylate (HMssEt) and a thermoresponsive di(ethylene glycol)‐containing methacrylate (MEO₂MA) units were synthesized. The ratio of HMssEt/MEO₂MA units in the random P(MEO₂MA‐co‐HMssEt) copolymer block enables the characteristics of well‐defined ssBCs to be amphiphilic or thermoresponsive and double hydrophilic. Their amphiphilicity or temperature‐induced self‐assembly results in nanoaggregates with hydrophobic cores having different densities of pendant disulfide linkages. The effect of disulfide crosslinking density on morphological variation of disulfide‐crosslinked nanogels is investigated. In response to reductive reactions, the partial cleavage of pendant disulfide linkages in the hydrophobic cores converts the physically associated aggregates to disulfide‐crosslinked nanogels. The occurrence of in‐situ disulfide crosslinks provides colloidal stability upon dilution. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2057–2067     

Ultra‐small sugar‐substituted N‐heterocyclic carbene‐protected palladium nanoparticles and catalytic activity

Ultra‐small Pd nanoparticles (UNPs) represent a distinctive type of nanomaterial making them very attractive for a range of applications. Herein, chiral sugar‐substituted N‐heterocyclic carbenes (NHCs) with various lengths of alkyl chain (sugar‐NHCs‐ⁿC_nH_2n+1) were first used to prepare water‐soluble Pd@NHCs‐sugar UNPs via an efficient ligand‐exchange strategy, which can be handled under air and are stable over 10 months. The Pd@NHCs‐sugar UNPs were highly monodisperse, with tunable core diameters from 1.7 to 2.1 nm, and an effect of the particle size on the N‐substituted aliphatic chains was observed. To investigate the accessibility of the surface, the Pd@NHCs‐sugar UNPs were studied as catalysts for C–C coupling reaction in eco‐friendly ethanol aqueous solution without any precipitation of metallic Pd. The presence of the longest aliphatic group in the Pd@NHCs‐sugar UNPs imparts to them the highest catalyst activity (turnover number and turnover frequency up to 196 000 and 3 920 000 h^?1).     

NIR light and enzyme dual stimuli‐responsive amphiphilic diblock copolymer assemblies

Using atom transfer radical polymerization (ATRP) and macromolecular azo coupling reaction, both o‐nitrobenzyl (ONB) group and azobenzene group were efficiently incorporated into the center of the amphiphilic diblock copolymer chain. The prepared diblock copolymer was well characterized by UV–vis, ¹H NMR, and GPC methods. Self‐assembly of the amphiphilic copolymer in selected solvents can result in uniform self‐assembly aggregates. In the presence of external stimuli [upconversion nanoparticles (UCNPs)/NIR light or enzyme], the amphiphilic diblock copolymer chain could be broken by the cleavage of ONB or azobenzene group, which would lead to the disruption of the self‐assembly aggregates. This photo‐ and enzyme‐triggered disruption process was proved by using transmission electron microscopy (TEM) and GPC method. Fluorescence emission spectra measurements indicated that the release of Nile red, a hydrophobic dye, encapsulated by the self‐assembly aggregates, could be successfully realized under the NIR light and enzyme stimuli. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2450–2457     

Metallopolymer–Peptide Hybrid Materials: Synthesis and Self‐Assembly of Functional,Polyferrocenylsilane–Tetrapeptide Conjugates

Conjugates of poly(ferrocenyldimethylsilane) (PFDMS) with Ac‐(GA)₂‐OH, Ac‐A₄‐OH, Ac‐G₄‐OH and Ac‐V₄‐OH have been prepared by reaction of the tetrapeptide units with the amino‐terminated metallopolymer. The number average degree of polymerisation (DP_n) of the PFDMS was approximately 20 and comparable materials with shorter (DP_n≈10) and/or amorphous chains have been prepared by the same procedure. Poly(ferrocenylethylmethylsilane) (PFEMS) was employed for the latter purpose. All conjugates were characterised by GPC, MALDI‐TOF MS, NMR and IR spectroscopy. With the exception of Ac‐V₄‐PFDMS₂₀, all materials exhibited some anti‐parallel β‐sheet structure in the solid state. The self‐assembly of the conjugates was studied in toluene by DLS. The vast majority of the materials, irrespective of peptide sequence or chain crystallinity, afforded fibres consisting of a peptidic core surrounded by a PFS corona. These fibres were found in the form of cross‐linked networks by TEM and AFM. The accessibility of the chemically reducing PFS corona has been demonstrated by the localised formation of silver nanoparticles on the surface of the fibres.     

Ultrasound‐Driven Secondary Self‐Assembly of Amphiphilic β‐Cyclodextrin Dimers

The controlled secondary self‐assembly of amphiphilic molecules in solution is theoretically and practically significant in amphiphilic molecular applications. An amphiphilic β‐cyclodextrin (β‐CD) dimer, namely LA‐(CD)₂, has been synthesized, wherein one lithocholic acid (LA) unit is hydrophobic and two β‐CD units are hydrophilic. In an aqueous solution at room temperature, LA‐(CD)₂ self‐assembles into spherical micelles without ultrasonication. The primary micelles dissociates and then secondarily form self‐assemblies with branched structures under ultrasonication. The branched aggregates revert to primary micelles at high temperature. The ultrasound‐driven secondary self‐assembly is confirmed by transmission electron microscopy, dynamic light scattering, ¹H NMR spectroscopy, and Cu²⁺‐responsive experiments. Furthermore, 2D NOESY NMR and UV/Vis spectroscopy results indicate that the formation of the primary micelles is driven by hydrophilic–hydrophobic interactions, whereas host–guest interactions promote the formation of the secondary assemblies. Additionally, ultrasonication is shown to be able to effectively destroy the primary hydrophilic–hydrophobic balances while enhancing the host–guest interaction between the LA and β‐CD moieties at room temperature.     

Chain center‐functionalized amphiphilic block polymers: Complementary hydrogen bond self‐assembly in aqueous solution

Hydrogen bonding self‐assemblies were formed in an aqueous medium from a pair of an amphiphilic ABA triblock copolymer and a hydrophobic homopolymer, both with a triple hydrogen bonding site that was complementary to each other and precisely placed at the main‐chain center: (PEGMA)_m–(MMA)_n– ADA –(MMA)_n–(PEGMA)_m and (MMA)_p– DAD –(MMA)_p ( A = hydrogen acceptor; D = hydrogen donor; PEGMA: PEG methacrylate; MMA: methyl methacrylate). The polymers were synthesized by the ruthenium‐catalyzed living radial polymerization with bifunctional initiators (Br– ADA –Br and Cl– DAD –Cl) aiming at pinpoint chain center functionalization to give a symmetric segmental sequence; ADA and DAD initiators were derived from 2,6‐diaminopyridine and thymine, respectively. On mixed equimolar in tetrahydrofuran (THF), both polymers spontaneously associated, and the apparently 1:1 assembly further grew into higher aggregate particles on subsequent addition of water. The aggregates in water/THF were relatively stable and uniform in size, which most likely stems from the intermolecular complementary hydrogen bond interaction at polymer chain centers. In sharp contrast, an equimolar mixture of ADA ‐block polymer and DAD ‐free poly(MMA) in water/THF resulted in larger and irregular particles, and thus short‐lived to eventually collapse. These results indicate that, however structurally marginal, precise pinpoint functionalization of macromolecular chains allows stable self‐assemblies via complementary hydrogen bond interaction even in aqueous media. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4498–4504     

Dramatic Specific‐Ion Effect in Supramolecular Hydrogels

We report on a pronounced specific‐ion effect on the intermolecular and chiral organization, supramolecular structure formation, and resulting materials properties for a series of low molecular weight peptide‐based hydrogelators, observed in the presence of simple inorganic salts. This effect was demonstrated using aromatic short peptide amphiphiles, based on fluorenylmethoxycarbonyl (Fmoc). Gel‐phase materials were formed due to molecular self‐assembly, driven by a combination of hydrogen bonding and π‐stacking interactions. Pronounced morphological changes were observed by atomic force microscopy (AFM) for Fmoc‐YL peptide, ranging from dense fibrous networks to spherical aggregates, depending on the type of anions present. The gels formed had variable mechanical properties, with G′ values between 0.8 kPa and 2.4 kPa as determined by rheometry. Spectroscopic analysis provided insights into the differential mode of self‐assembly, which was found to be dictated by the hydrophobic interactions of the fluorenyl component, with comparable H‐bonding patterns observed in each case. The efficiency of the anions in promoting the hydrophobic interactions and thereby self‐assembly was found to be consistent with the Hofmeister anion sequence. Similar effects were observed with other hydrophobic peptides, Fmoc‐VL and Fmoc‐LL. The effect was found to be less pronounced for a less hydrophobic peptide, Fmoc‐AA. To get more insights into the molecular mechanism, the effect of anions on sol–gel equilibrium was investigated, which indicates the observed changes result from the specific‐ion effects on gels structure, rather than on the sol–gel equilibrium. Thus, we demonstrate that, by simply changing the ionic environment, structurally diverse materials can be accessed providing an important design consideration in nanofabrication via molecular self‐assembly.     

Three‐arm star block copolymers of aromatic polyether and polystyrene from chain‐growth condensation polymerization,atom transfer radical polymerization,and click reaction

Well‐defined (AB)₃ type star block copolymer consisting of aromatic polyether arms as the A segment and polystyrene (PSt) arms as the B segment was prepared using atom transfer radical polymerization (ATRP), chain‐growth condensation polymerization (CGCP), and click reaction. ATRP of styrene was carried out in the presence of 2,4,6‐tris(bromomethyl)mesitylene as a trifunctional initiator, and then the terminal bromines of the polymer were transformed to azide groups with NaN₃. The azide groups were converted to 4‐fluorobenzophenone moieties as CGCP initiator units by click reaction. However, when CGCP was attempted, a small amount of unreacted initiator units remained. Therefore, the azide‐terminated PSt was then used for click reaction with alkyne‐terminated aromatic polyether, obtained by CGCP with an initiator bearing an acetylene unit. Excess alkyne‐terminated aromatic polyether was removed from the crude product by means of preparative high performance liquid chromatography (HPLC) to yield the (AB)₃ type star block copolymer (M_n = 9910, M_w/M_n = 1.10). This star block copolymer, which contains aromatic polyether segments with low solubility in the shell unit, exhibited lower solubility than A₂B or AB₂ type miktoarm star copolymers. In addition, the obtained star block copolymer self‐assembled to form spherical aggregates in solution and plate‐like structures in film. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012