The elimination kinetics and mechanisms of ethyl piperidine‐3‐carboxylate,ethyl 1‐methylpiperidine‐3‐carboxylate,and ethyl 3‐(piperidin‐1‐yl)propionate in the gas phase

The gas‐phase elimination kinetics of the above‐mentioned compounds were determined in a static reaction system over the temperature range of 369–450.3°C and pressure range of 29–103.5 Torr. The reactions are homogeneous, unimolecular, and obey a first‐order rate law. The rate coefficients are given by the following Arrhenius expressions: ethyl 3‐(piperidin‐1‐yl) propionate, log k₁(s^?1) = (12.79 ± 0.16) ? (199.7 ± 2.0) kJ mol^?1 (2.303 RT)^?1; ethyl 1‐methylpiperidine‐3‐carboxylate, log k₁(s^?1) = (13.07 ± 0.12)–(212.8 ± 1.6) kJ mol^?1 (2.303 RT)^?1; ethyl piperidine‐3‐carboxylate, log k₁(s^?1) = (13.12 ± 0.13) ? (210.4 ± 1.7) kJ mol^?1 (2.303 RT)^?1; and 3‐piperidine carboxylic acid, log k₁(s^?1) = (14.24 ± 0.17) ? (234.4 ± 2.2) kJ mol^?1 (2.303 RT)^?1. The first step of decomposition of these esters is the formation of the corresponding carboxylic acids and ethylene through a concerted six‐membered cyclic transition state type of mechanism. The intermediate β‐amino acids decarboxylate as the α‐amino acids but in terms of a semipolar six‐membered cyclic transition state mechanism. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 106–114, 2006     

Gas‐phase ozonolysis: Rate coefficients for a series of terpenes and rate coefficients and OH yields for 2‐methyl‐2‐butene and 2,3‐dimethyl‐2‐butene

The kinetics of the gas‐phase reactions of O₃ with a series of selected terpenes has been investigated under flow‐tube conditions at a pressure of 100 mbar synthetic air at 295 ± 0.5 K. In the presence of a large excess of m‐xylene as an OH radical scavenger, rate coefficients k(O₃+terpene) were obtained with a relative rate technique, (unit: cm³ molecule^?1 s^?1, errors represent 2σ): α‐pinene: (1.1 ± 0.2) × 10^?16, ³Δ‐carene: (5.9 ± 1.0) × 10^?17, limonene: (2.5 ± 0.3) × 10^?16, myrcene: (4.8 ± 0.6) × 10^?16, trans‐ocimene: (5.5 ± 0.8) × 10^?16, terpinolene: (1.6 ± 0.4) × 10^?15 and α‐terpinene: (1.5 ± 0.4) × 10^?14. Absolute rate coefficients for the reaction of O₃ with the used reference substances (2‐methyl‐2‐butene and 2,3‐dimethyl‐2‐butene) were measured in a stopped‐flow system at a pressure of 500 mbar synthetic air at 295 ± 2 K using FT‐IR spectroscopy, (unit: cm³ molecule^?1 s^?1, errors represent 2σ ): 2‐methyl‐2‐butene: (4.1 ± 0.5) × 10^?16 and 2,3‐dimethyl‐2‐butene: (1.0 ± 0.2) × 10^?15. In addition, OH radical yields were found to be 0.47 ± 0.04 for 2‐methyl‐2‐butene and 0.77 ± 0.04 for 2,3‐dimethyl‐2‐butene. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 394–403, 2002     

Design,Synthesis and Biological Evaluation of Novel N‐(4‐([2,2′:5′,2′′‐Terthiophen]‐5‐yl)‐2‐methylbut‐3‐yn‐2‐yl) Benzamide Derivatives

On the basis of the principle of combination of active groups, a series of novel N‐(4‐([2,2′:5′,2′′‐terthiophen]‐5‐yl)‐2‐methylbut‐3‐yn‐2‐yl) benzamide derivatives were designed, synthesized and systematically evaluated for their antiviral activity against tobacco mosaic virus (TMV). The bioassay results showed that most of these compounds displayed good anti‐TMV activity, and some of them exhibited higher antiviral activity than commercial Ningnanmycin. Especially, compound 8e with excellent anti‐TMV activity (inactivation activity, 92.3%/500 µg·mL^?1; curative activity, 85.7%/500 µg·mL^?1 and protection activity, 64.7%/500 µg·mL^?1) emerged as a potential inhibitor of plant virus TMV. Quantitative structure‐activity relationship studies proved that the van der Waals volume (V) and electronic parameter (∑(∑σ_o+σ_p) and ∑σ_m) for the substituent R¹ were very important for antiviral activities in this class of compounds.     

Synthesis of 1‐Methyl‐3‐aryl‐substituted Titanocene and Zirconocene Dichlorides and Crystal Structure of Bis[η5‐1‐methyl‐3‐(α, α‐dimethylbenzyl) cyclopentadienyl] titanium Dichloride

The syntheses of a series of l‐methyl‐3‐aryl‐substituted titanocene and zirconocene dichlorides are reported. These complexes are synthesized by the reaction of 2‐ and 3‐methyl‐6, 6‐dimethylfulvenes (1:4) with aryllithium, followed by the reaction with TiCl₄·2THF, ZrCl₄ and (CpTiCl₂)₂O respectively, to give complexes 1–5. The complex [η⁵‐1‐methyl‐3‐(α, α‐dimethylbenzyl) cyclopentadienyl] titanium dichloride has been studied by X‐ray diffraction. The red crystal of this complex is monoclinic, space group P2_t/C with unit cell parameters: a =6.973(6) × 10^?1 nm, b =36.91(2) × 10^?1 nm, c = 10.063(4) × 10^?1 nm, α=β= γ = 93.35(5)°, V = 2584(5) × 10^?3 nm³ and Z = 4. Refinement for 1004 observed reflections gives the final R of 0.088. There are four independent molecules per unit cell.     

Distribution of the methyl radical adduct of N‐benzylidene‐1‐diethoxyphosphoryl‐1‐methylethylamine N‐oxide‐type nitrones in water–sodium dodecyl sulfate micelles: an electron paramagnetic resonance spin trapping study

The behavior of the methyl radical adduct of six β‐phosphorylated nitrones in the N‐benzylidene‐1‐diethoxyphosphoryl‐1‐methylethylamine N‐oxide series in the presence of sodium dodecyl sulfate (SDS) micelles was followed by electron paramagnetic resonance spectroscopy. Except when the highly hydrophilic trap 4‐PyOPN (2) was used, all the adducts were found to partition significantly between micelles and the bulk aqueous phase. The average correlation time τ of the exchange of spin adducts between SDS micelles and water was found to be in the range 5 × 10^?8—4 × 10^?7 s, which is in the region of the life time of an SDS monomer in the micelle structure. In each case, the adduct affinity for the micelles has been quantified by evaluating its micelle–water distribution coefficient K_d. Copyright © 2002 John Wiley & Sons, Ltd.     

2,4‐Diamino‐5‐(1‐naphthyl)‐3,5‐diaza‐1‐azoniaspiro[5.5]undeca‐1,3‐diene chloride

The title salt, C₁₈H₂₂N₅⁺·Cl^?, is a member of a new series of lipophilic 4,6‐di­amino spiro‐s‐triazines which are potent in­hib­itors of di­hydro­folate reductase. The protonated triazine ring deviates from planarity, whereas the cyclo­hexane ring adopts a chair conformation. A rather unusual hydrogen‐bonding scheme exists in the crystal. There is a centrosymmetric arrangement involving two amino groups and two triazine ring N atoms, with graph‐set R(8) and an N?N distance of 3.098 (3) Å, flanked by two additional R(8) systems, involving two amino groups, a triazine ring N atom and a Cl^? anion, with N?Cl distances in the range 3.179 (2)–3.278 (2) Å. Furthermore, the Cl^? anion, the protonated triazine ring N atom and an amino group form a hydrogen‐bonding system with graph‐set R(6).     

Benzodifuran‐containing well‐defined π‐conjugated polymers for photovoltaic cells

Two well‐defined alternating π‐conjugated polymers containing a soluble electroactive benzo[1,2‐b:4,5‐b′]difuran (BDF) chromophore, poly(BDF‐(9‐phenylcarbazole)) (PBDFC), and poly(BDF‐benzothiadiazole) (PBDFBTD) were synthesized via Sonogashira copolymerizations. Their optical, electrochemical, and field‐effect charge transport properties were characterized and compared with those of the corresponding homopolymer PBDF and random copolymers of the same overall composition. All these polymers cover broad optical absorption ranges from 250 to 750 nm with narrow optical band gaps of 1.78–2.35 eV. Both PBDF and PBDFBTD show ambipolar redox properties with HOMO levels of ?5.38 and ?5.09 eV, respectively. The field‐effect mobility of holes varies from 2.9 × 10^?8 cm² V^?1 s^?1 in PBDF to 1.0 × 10^?5 cm² V^?1 s^?1 in PBDFBTD. Bulk heterojunction solar cell devices were fabricated using the polymers as the electron donor and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester as the electron acceptor, leading to power conversion efficiencies of 0.24–0.57% under air mass 1.5 illumination (100 mW cm^?2). These results indicate that their band gaps, molecular electronic energy levels, charge mobilities, and molecular weights are readily tuned by copolymerizing the BDF core with different π‐conjugated units. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Kinetics and Mechanism of Oxidation of Chromium(III)‐guanosine 5‐Monophosphate Complex by Periodate

The kinetics of oxidation of the chromium(III)‐guanosine 5‐monophosphate complex, [Cr^III(L)(H₂O)₄]³⁺(L = guanosine 5‐monophosphate) by periodate in aqueous solution to Cr^VI have been studied spectrophotometrically over the 25–45 °C range. The reaction is first order with respect to both [IO₄^?] and [Cr^III], and increases with pH over the 2.38–3.68 range. Thermodynamic activation parameters have been calculated. It is proposed that electron transfer proceeds through an inner‐sphere mechanism via coordination of IO₄^? to chromium(III).     

Synthesis,characterization, and optimum reaction conditions of oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol

The reaction conditions of the oxidative polycondensation of 2‐[(pyridine‐2‐yl‐methylene) amino] phenol (2‐PMAP) with air O₂, H₂O₂, and NaOCl were studied in an aqueous alkaline medium between 60 and 90 °C. Oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol (O‐2‐PMAP) was characterized with ¹H NMR, Fourier transform infrared, ultraviolet–visible, size exclusion chromatography (SEC), and elemental analysis techniques. Moreover, solubility testing of the oligomer was performed in polar and nonpolar organic solvents. With the NaOCl, H₂O₂, and air O₂ oxidants, the conversions of 2‐PMAP into O‐2‐PMAP were 98, 87, and 62%, respectively, in an aqueous alkaline medium. According to SEC, the number‐average molecular weight, weight‐average molecular weight, and polydispersity index of O‐2‐PMAP were 2262 g mol^?1, 2809 g mol^?1, and 1.24 with NaOCl, 3045 g mol^?1, 3861 g mol^?1, and 1.27 with air O₂, and 1427 g mol^?1, 1648 g mol^?1, and 1.16 with air H₂O₂, respectively. Also, thermogravimetric analysis showed that O‐2‐PMAP was stable against thermooxidative decomposition. The weight loss of O‐2‐PMAP was 96.68% at 900 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2717–2724, 2004     

DFT study of nitroxide radicals: explicit modeling of solvent effects on the structural and electronic characteristics of 4‐amino‐2,2,6,6‐tetramethyl‐piperidine‐N‐oxyl

An explicit DFT modeling of water surroundings on the electron paramagnetic resonance properties of 4‐amino‐2,2,6,6‐tetramethyl‐piperidine‐N‐oxyl (TA) has been performed. A stepwise hydration of TA is accompanied with certain changes in geometrical parameters (bond lengths and angles) and redistribution of partial electric charges in TA. An aqueous cluster of 45 water molecules can be considered as an appropriate model for a complete aqueous shell around TA, although most of the structural and electronic characteristics of TA already converge at about 10 water molecules. Water surroundings induce an increase in electron spin density on the nitrogen atom of the nitroxide fragment due to stabilization of the polar resonance structure > N^+?? O^? at the expense of less polar structure > N? O^?. The water‐induced rise of the isotropic splitting constant a_iso, calculated from the contact term of the hyperfine interaction, comprises Δa_iso(ρ_N2) = 2.2–2.5 G, which is typical of experimental value for TA. There are two contributions to the solvent effect on the a_iso(ρ_N2) value: the redistribution of spin density in the nitroxide fragment (polarity effect) and water‐induced distortions of TA geometry. Microscopic variations in a hydrogen‐bonded water network cause noticeable fluctuations of the splitting constant a_iso(ρ_N2). Calculations of the atomic spin density (σ_N2) allowed us to compute the splitting constant from the relationship a_iso(σ_N2) = Qσ_N2, where Q = 36.2 G. A practical advantage of using this relationship is that it gives ‘smoothed’ values of the splitting constant, which are sensitive to the environment polarity but remain tolerant to microscopic fluctuations of the hydrogen‐bonded water network around a spin‐label molecule. Copyright © 2010 John Wiley & Sons, Ltd.     

An inhibitor of Janus kinase 3: 4‐(4‐hydroxy­phenyl­amino)‐6,7‐di­methoxy­quinazolin‐1‐ium chloride methanol solvate

The crystal structure of the title compound, C₁₆H₁₆N₃O₃⁺·Cl^?·CH₄O (WHI‐P131, an inhibitor of Janus kinase 3), contains four hydrogen bonds. There are two hydrogen bonds within the asymmetric unit, i.e. interactions between WHI‐P131 OH and Cl^?, and between methanol and Cl^?. There is a third interaction between WHI‐P131 NH and Cl^? (related by a 2₁ screw) and a fourth between WHI‐P131 NH and methanol (related by an n‐glide). The hydrogen‐bond pattern for these interactions can be described by the first‐level hydrogen‐bond graph‐set notation D¹₁(2)D¹₁(2)D¹₁(2)D¹₁(2). The second‐level graph‐set notation (for combinations of two hydrogen bonds) was determined to be D¹₂(3)­D¹₂(3)­D²₂(4)­D²₂(9)­D²₂(14)­C¹₂(9).     

Experimental and Theoretical Studies on DNA‐Binding and Spectral Properties of ‘Light Switch’ Complexes [Ru(L)2(ppn)]2+ (L=2,2′‐Bipyridine and 1,10‐Phenanthroline; ppn=Pteridino[6,7‐f] [1,10]phenanthroline‐11,13‐diamine)

The ligand pteridino[6,7‐f] [1,10]phenanthroline‐11,13‐diamine (ppn) and its Ru^II complexes [Ru(bpy)₂(ppn)]²⁺ ( 1 ; bpy=2,2′‐bipyridine) and [Ru(phen)₂(ppn)]²⁺ ( 2 ; phen=1,10‐phenanthroline) were synthesized and characterized by elemental analysis, electrospray MS, ¹H‐NMR, and cyclic voltammetry. The DNA‐binding behaviors of 1 and 2 were studied by spectroscopic and viscosity measurements. The results indicate that both complexes strongly bind to calf‐thymus DNA in an intercalative mode, with DNA‐binding constants K_b of (1.7±0.4)?10⁶ M ^?1 and (2.6±0.2)?10⁶ M ^?1, respectively. The complexes 1 and 2 exhibit excellent DNA‐‘light switch’ performances, i.e., they do not (or extremely weakly) show luminescence in aqueous solution at room temperature but are strongly luminescent in the presence of DNA. In particular, the experimental results suggest that the ancillary ligands bpy and phen not only have a significant effect on the DNA‐binding affinities of 1 and 2 but also have a certain effect on their spectral properties. [Ru(phen)₂(ppn)]²⁺( 2 ) might be developed into a very prospective DNA‐‘light switch’ complex. To explain the DNA‐binding and spectral properties of 1 and 2 , theoretical calculations were also carried out applying the DFT/TDDFT method.     

Electrochemical Behaviors of Adenosine‐5′‐triphosphate on Molecular Wire Modified Carbon Paste Electrode and Its Sensitive Detection

A new electrochemical method was proposed for the determination of adenosine‐5′‐triphosphate (ATP) based on the electrooxidation at a molecular wire (MW) modified carbon paste electrode (CPE), which was fabricated with diphenylacetylene (DPA) as the binder. A single well‐defined irreversible oxidation peak of ATP appeared on MW‐CPE with adsorption‐controlled process and enhanced electrochemical response in a pH 3.0 Britton‐Robinson buffer solution, which was due to the presence of high conductive DPA in the electrode. The electrochemical parameters of ATP were calculated with the electron transfer coefficient (α) as 0.54, the electron transfer number (n) as 1.9, the apparent heterogeneous electron transfer rate constant (k_s) as 2.67 × 10^?5 s^?1 and the surface coverage (Γ_T) as 4.15 × 10^?10 mol cm^?2. Under the selected conditions the oxidation peak current was proportional to ATP concentration in the range from 1.0 × 10^?7 mol L^?1 to 2.0 × 10^?3 mol L^?1 with the detection limit as 1.28 × 10^?8 mol L^?1 (3σ) by sensitive differential pulse voltammetry. The proposed method showed good selectivity without the interferences of coexisting substances and was successful applied to the ATP injection samples detection.     

Electrochemical Characterization of Myoglobin‐Polylysine Films at a Temperature Range of 6–80 °C

This work demonstrated for the first time that myoglobin cross‐linked in polylysine films is electrochemically active at 6 °C. At 6 °C, these protein films exhibited reversible reduction/oxidation peaks which are characteristic of Fe^III/Fe^II redox couple. The estimated current function densities (J=1.6×10^?4 C/V cm²), surface concentrations (Γ_T=0.10 nmol/cm²) and standard electron transfer constant (k_s=13.86 s^?1) at 6 °C for the data taken at a scan rate of 0.1 V/s were similar to those which were obtained at 10, 15 and 23 °C. Basically, this study shows a possible electrocatalytic application of these myoglobin/polylysine films, for example in low temperature sensing applications.     

(Z)‐2‐Methylbuten‐1‐yl(aryl)iodonium trifluoromethanesulfonates containing electron‐withdrawing groups on the aryl moiety

The crystal structures of [(Z)‐2‐methyl­but‐1‐en‐1‐yl]­[4‐(tri­fluoro­methyl)­phenyl]­iodo­nium tri­fluoro­methane­sulfonate, C₁₂H₁₃F₃I⁺·CF₃O₃S^?, (I), (3,5‐di­chloro­phenyl)­[(Z)‐2‐methyl­but‐1‐en‐1‐yl]­iodo­nium tri­fluoro­methane­sulfonate, C₁₁H₁₂­Cl₂I⁺·CF₃O₃S^?, (II), and bis{[3,5‐bis­(tri­fluoro­methyl)­phenyl][(Z)‐2‐methyl­but‐1‐en‐1‐yl]­iodo­nium} bis­(tri­fluoro­methane­sulfonate) di­chloro­methane solvate, 2C₁₃H₁₂F₆I⁺·­2CF₃­O₃S^?·CH₂Cl₂, (III), are described. Neither simple acyclic β,β‐di­alkyl‐substituted alkenyl­(aryl)­idonium salts nor a series containing electron‐deficient aryl rings have been described prior to this work. Compounds (I)–(III) were found to have distorted square‐planar geometries, with each I atom interacting with two tri­fluoro­methane­sulfonate counter‐ions.     

Crystal structure,thermal properties and detonation characterization of bis(5‐amino‐1,2,4‐triazol‐4‐ium‐3‐yl)methane dichloride

Bis(5‐amino‐1,2,4‐triazol‐4‐ium‐3‐yl)methane dichloride (BATZM·Cl₂ or C₅H₁₀N₈²⁺·2Cl^?) was synthesized and crystallized, and the crystal structure was characterized by single‐crystal X‐ray diffraction; it belongs to the space group C2/c (monoclinic) with Z = 4. The structure of BATZM·Cl₂ can be described as a V‐shaped molecule with reasonable chemical geometry and no disorder, and its one‐dimensional structure can be described as a rhombic helix. The specific molar heat capacity (C_p,m) of BATZM·Cl₂ was determined using the continuous C_p mode of a microcalorimeter and theoretical calculations, and the C_p,m value is 276.18 J K^?1 mol^?1 at 298.15 K. The relative deviations between the theoretical and experimental values of C_p,m, H_T – H_298.15K and S_T – S_298.15K of BATZM·Cl₂ are almost equivalent at each temperature. The detonation velocity (D) and detonation pressure (P) of BATZM·Cl₂ were estimated using the nitrogen equivalent equation according to the experimental density; BATZM·Cl₂ has a higher detonation velocity (7143.60 ± 3.66 m s^?1) and detonation pressure (21.49 ± 0.03 GPa) than TNT. The above results for BATZM·Cl₂ are compared with those of bis(5‐amino‐1,2,4‐triazol‐3‐yl)methane (BATZM) and the effect of salt formation on them is discussed.     

Concurrent two one‐electron transfer in the oxidation of chromium(III) complexes with trans‐1,2‐diaminocyclohexane‐N,N,N′,N′‐tetraacetate and diethylenetriaminepentaacetate ligands by periodate ion

The kinetics of oxidation of [Cr^IIIcdta(H₂O)]^? and [Cr^IIIdtpa(H₂O)]^2? (where cdta = trans‐1,2‐diaminocyclohexane‐N,N,N′,N′‐tetraacetate and dtpa = diethylenetriaminepentaacetate) by periodate ion has been studied in aqueous solutions. The oxidation of these complexes was carried out in the pH range 5.52–7.44 for the [Cr^IIIcdta(H₂O)]^? complex and the pH range 5.56–8.56 for the [Cr^IIIdtpa(H₂O)]^2? complex. The reaction exhibited an uncommon second‐order dependence on [Cr^IIIL(H₂O)]ⁿ (L = cdta or dtpa and n=?1 or ?2, respectively) and a first‐order dependence on [IO^?₄]. At fixed reaction conditions, the reaction rate is described by Eq. (i). The third‐order rate constant, k₃, varied with [H⁺] according to Eq. (ii). (i) (ii) A mechanism in which simultaneous one‐electron transfer from two [Cr^IIIL(OH)]^n?1 ions to I(VII) is proposed. The two [Cr^IIIL(OH)]^n?1 ions are bridged to I(VII) via the hydroxo group. Periodate ion is known to undergo rapid substitution or expansion of its coordination number from four to six. The activation parameters ΔH* and ΔS* were calculated using the Eyring equation. The relatively high negative values of ΔS* are consistent with an associative process preceding electron transfer. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 729–735, 2012     

A Fluorescent Chemosensor for Dihydrogen Phosphate Ion Based on 2‐[2‐Hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine‐Fe3+ Ensemble

A long wavelength emission fluorescent (612 nm) chemosensor with high selectivity for H₂PO₄^? ions was designed and synthesized according to the excited state intramolecular proton transfer (ESIPT). The sensor can exist in two tautomeric forms ('keto' and 'enol') in the presence of Fe³⁺ ion, Fe³⁺ may bind with the 'keto' form of the sensor. Furthermore, the in situ generated GY‐Fe³⁺ ensemble could recover the quenched fluorescence upon the addition of H₂PO₄^? anion resulting in an off‐on‐type sensing with a detection limit of micromolar range in the same medium, and other anions, including F^?, Cl^?, Br^?, I^?, AcO^?, HSO₄^?, ClO₄^? and CN^? had nearly no influence on the probing behavior. The test strips based on 2‐[2‐hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine and Fe³⁺ metal complex ( GY‐Fe³⁺ ) were fabricated, which could act as convenient and efficient H₂PO₄^? test kits.     

(M)‐ and (P)‐8‐[(1S,2R)‐2‐hydroxy‐1‐methyl‐2‐phenylethyl]‐8‐methyl‐8,9‐dihydro‐7H‐dinaphth[2,1‐c:1′,2′‐e]azepinium bromide solvates

The title compounds are diastereoisomers with antipodean axial chirality. The M isomer crystallizes as a (1/3) acetone solvate, C₃₂H₃₀NO⁺·Br^?·3C₃H₆O, while the P isomer crystallizes as a (1/1) di­chloro­methane solvate, C₃₂H₃₀NO⁺·Br^?·CH₂Cl₂. In each structure, O—H?Br hydrogen bonds link the cations and anions to give ion pairs. The seven‐membered azepinium ring adopts the usual twisted‐boat conformation and its ring strain causes a slight curvature of the plane of each naphthyl ring.     

A novel azocompound, 2‐(4‐phenylazoaniline)‐4‐phenylphenol: Spectroscopic and quantum‐chemical approach

A novel azocompound with two nonequivalents azo groups, 2‐(4‐phenylazoaniline)‐4‐phenylphenol, was synthesized and characterized by spectroscopic and computational analysis. An intramolecular hydrogen bonding (HB), ? O₁? H₁ ··· N₁? , involving the ? N₁?N₂? group and the proton in a neighbor hydroxyl moiety, was identified. It was found responsible for a characteristic π‐conjugated H₁? O₁? C₁₈?C₁₃? N₂?N₁? six‐membered cyclic fragment. It is worth noting that this azo group is involved in an azo‐hydrazo equilibrium, being the azo form the most stable one. This resonance‐assisted HB was characterized using the OH‐related infrared bands and the corresponding signals in ¹H NMR. In addition, conformational studies and geometrical and electronic parameter calculations were performed using the density functional theory, at B3LYP/6‐311++G** level. Bond and ring critical points were identified using the atoms in molecules theory, which allowed confirming the intramolecular HB. The second azo‐group cannot be involved in HB, but it also presents two stereoisomerics forms corresponding to cis (Z) and trans (E) configurations, with the later being the one with the lowest energy. © 2013 Wiley Periodicals, Inc.