Characterisation of core-shell latexes by flow field-flow fractionation with multi-angle light scattering detection

Flat channel asymmetrical flow field-flow fractionation with multi-angle light scattering (MALS) detection was used to study the swelling behaviour of core-shell particles with either carboxylated or hydroxylated shells as a function of pH and ionic strength. The equilibration time of the most heavily carboxylated core-shells appeared to be of the order of several hours. At low ionic strength (5 mM), the carboxylated core-shells showed a definite swelling response to a change in pH in the range from 5 to 10, ranging from a hydrodynamic radius increase of 24 to 118%, depending on the degree of carboxylation. A much milder response was found for the change of the root mean square (r.m.s.) radius as measured with MALS, indicating that the scattering plane is moving inwards during the swelling process due to a decreasing density of the shell. The hydroxylated core-shells appeared to be inert to a change in pH. Also the response of two expanded (pH 10) carboxylated core-shells on increasing ionic strength was studied. Comparison of the results of these ionic strength experiments with theoretical predictions based on Donnan equilibrium led us to the conclusion that a significant amount of counter-ion condensation may take place in the shells.     

Relationship between swelling and the electrohydrodynamic properties of functionalized carboxymethyldextran macromolecules

The electrostatic, hydrodynamic, and swelling properties of a well-defined, functionalized carboxymethyldextran (CMD) polysaccharide are investigated in aqueous NaNO3 solution over a broad ionic strength range. The impact of the polycarboxylate charge and molar mass of the CMD macromolecules on their electrohydrodynamic features is thoroughly examined by combined protolytic titration, dynamic light scattering, and electrokinetic analyses. Electrophoretic mobility data obtained for sufficiently high electrolyte concentrations reveal a typical soft particle behavior. Upon decrease of the ionic strength, mobilities strongly increase in magnitude while significant electrostatic swelling takes place, as reflected in a decrease in the diffusion coefficients. CMD entities undergo conformational transitions from compact random coil at large ionic strengths to swollen coil and possibly a wormlike structure at lower NaNO3 concentrations. The magnitude of the variations in size and mobility with electrolyte concentration strongly depends on the overall charge of the CMD entity as well as on its molar mass. These factors control the stiffness of the constituent polymer chains and thus the degree of macromolecular permeability ("softness"). Using the soft-diffuse interface formalism previously developed for the electrohydrodynamics of charged permeable macromolecules, a quantitative analysis of the electrophoretic mobility data is presented. The measured values of the diffusion coefficient and space charge density Gamma degrees, as evaluated independently from the modeling of potentiometric titration curves, are taken into account in a self-consistent manner. It is found that large CMD entities of low charge densities are the most permeable to flow penetration with a limited heterogeneous electrostatic stiffening of the chains, whereas small CMD entities of larger Gamma degrees significantly expand upon lowering the ionic strength, giving rise to a strong anisotropy for the spatial distribution of polymer chain density.     

Equilibrium and kinetic aspects of the pH-dependent swelling of poly(2-vinylpyridine-co-styrene) microgels

 Monodisperse, cationic microgels were synthesized by surfactant-free emulsion copolymerization of 2-vinylpyridine and styrene, using the cationic initiator 2,2′-azobis(2-amidinopropane) dihydrochloride. Low levels of divinylbenzene were employed as a cross-linking agent. The particle morphologies and diameters were characterized by a combination of TEM and photon correlation spectroscopy. At styrene contents less than 40% by weight, the particles were spherical with diameters of approximately 200 nm. The diameter decreased with increasing styrene content and the morphology changed from spherical to irregular. The pH-dependent swelling of the microgel particles was studied in constant ionic strength acetate buffers, as a function of styrene content and cross-link density. Particle diameters increased sharply below pH 4.6 due to ionization of the 2-vinylpyridine residues. At higher styrene levels, the transition pH is shifted to lower values and the extent of swelling is reduced. The pH at which swelling occurred was identical for the three cross-linker levels (0.25, 0.50 and 1.5 wt%), but the extent of swelling decreased in this order as expected. The rate of swelling of the particles was investigated by stopped-flow spectrophotometry; as microgels swell the turbidity of the dispersions decreases and this was followed as a function of time. Higher styrene contents not only reduce the extent of swelling, but also the rate at which maximum swelling is reached, whereas the level of cross-linker employed in this study has no effect on the rate of swelling. Received: 26 May 1997 Accepted: 16 July 1997     

Visualizing the interaction between poly-L-lysine and poly(acrylic acid) microgels using microscopy techniques: effect of electrostatics and peptide size

The interaction between lightly cross-linked poly(acrylic acid) (pAA) microgels (50-150 microm in diameter) and poly-L-lysine (pLys) was studied as a function of pH, ionic strength, peptide size, and concentration. The swelling response and distribution of polypeptides within microgel particles was monitored by micromanipulator-assisted light microscopy and confocal laser scanning microscopy, while binding isotherms of pLys in the microgels were determined spectrophotometrically. Conformational changes of pLys were investigated by circular dichroism. The molecular weight of pLys was found to influence the degree of peptide-induced microgel deswelling, largely due to limitation of peptides larger than the effective network mesh size to penetrate the entire gel. Large peptides were concentrated within a surface layer of the gel particles, and at low ionic strength this dense surface layer was shown to act as a largely steric barrier for further penetration of compounds into the gel core. Small peptides, however, distributed evenly throughout the microgel particles and were able to create large microgel volume reductions. The deswelling of microgels increased with decreasing pH, while the uptake of pLys was significantly reduced at low pH. The effect of ionic strength on the interactions of pLys and oppositely charged pAA microgels was moderate and only pronounced for deswelling of gels at high pH. A significant increase in the alpha-helix content of pLys interacting with the oppositely charged microgels was observed for high molecular weight peptides, and the extent of alpha-helix formation was as expected more pronounced at high pH, i.e., at high charge density of the microgels but reduced charge density of the peptides.     

Preparation and characterization of hyaluronate-hydroxyethyl acrylate blend hydrogel for controlled release device

Hyaluronate-hydroxyethyl acrylate blend hydrogels were investigated as matrices for controlled release devices. Glycidyl methacrylate (GMA) derivatized HA (GMA-HA) was synthesized by coupling of GMA to HA in the presence of a suitable catalyst. These hydrogels were prepared by a free radical copolymerization of GMA-HA and hydroxyethyl acrylate. The water content of these hydrogels at equilibrium swelling in water (Ww) was 0.978+/-0.0073 (n=18); however, these hydrogel was mechanically tough and could be used as disk shape. The hydrogels swelling were found to depend on ionic strength and pH. The dried hydrogels quickly regained their original condition in water, and they swelled to more than 90% of its initial water contents after 30 min. This swelling-deswelling behavior was reproducible. The release of chlorpromazine HCl as a model cationic drug from the gels was suppressed significantly in water. The release increased with increasing the ionic strength and decreasing pH of bulk solutions.     

Interrelations between charging, structure and electrokinetics of nanometric polyelectrolyte films

Streaming current, surface conductivity and swelling data of poly(acrylic acid) (PAA) and poly(ethylene imine) (PEI) thin films are analyzed on the basis of the theory for diffuse soft interfaces (J.F.L. Duval, R. Zimmermann, A. L. Cordeiro, N. Rein, C. Werner, Langmuir 25 (2009) 10691). Focus is put on ways to unravel the electroosmotic and migration contributions of the measured surface conductivity, which is crucial for appropriate electrokinetic analysis of films carrying high densities of dissociable groups. Results demonstrate that the osmotically-driven swelling of the PAA films with increasing pH is accompanied by an increase in diffuseness for the interphasial polymer segment density distribution. This heterogeneity is particularly marked at low ionic strength with a non-monotonous dependence of the streaming current on pH and the presence of a maximum at pH～6.5. The analysis of the PEI films evidences heterogeneous swelling with lowering pH, i.e. upon protonation of the amine groups. The characteristic decay length in the interphasial PEI segment density distribution is found to be nearly independent of the pH, which is in line with the moderate swelling determined by ellipsometry. A critical discussion is given on the strengths and limitations of electrokinetics/surface conductivity for quantifying the coupled electrohydrodynamic and structural properties of moderately to highly swollen polyelectrolyte thin films.     

聚乙烯醇硫酸钾水凝胶电机械化学行为研究

通过将交联聚乙烯醇硫酸酯化的方法制备了一种新型电刺激响应性聚乙烯醇硫酸钾(PVSK)智能水凝胶,并探讨了溶液离子强度和pH对PVSK水凝胶的溶胀吸水率、机械性能以及电机械化学行为的影响.结果表明,制备的PVSK水凝胶的平衡溶胀比随NaCl溶液离子强度的增大而减小,在pH2.39～10.83范围内基本不受溶液pH的影响;经不同离子强度和pH的NaCl溶液充分溶胀的PVSK水凝胶具有良好的机械性能,在非接触的直流电场作用下,该水凝胶向电场负极弯曲,凝胶的弯曲速度和弯曲偏转量随外加电场强度的增加而增大,随NaCl溶液离子强度的增大出现临界最大值,但不随溶液pH(2.08～10.53)的改变而改变;在循环电场作用下,PVSK水凝胶的电机械化学行为具有良好的可逆性.     

先辐射后冻融法制备聚乙烯醇/水溶性壳聚糖/甘油水凝胶的云南白药药物释放性能研究

采用先辐射后冻融的方法制备了一系列聚乙烯醇(PVA)/水溶性壳聚糖/甘油水凝胶,通过浸泡法在水凝胶中载入云南白药,并且研究了溶液pH值、离子强度、冻融次数和PVA浓度对水凝胶溶胀性能和云南白药释放性能的影响.研究发现水凝胶的溶胀度随溶液离子强度的增大而下降,且酸性溶液大于中性溶液.水溶性壳聚糖的加入有利于云南白药载入凝胶,同时使云南白药的释放具有pH和离子强度敏感性.云南白药的释放量在模拟体液中最大,在中性溶液中次之,在水和酸性溶液中最小,与溶胀度变化关系相反.而水凝胶的溶胀度和云南白药释放量均随冻融次数和PVA浓度的增大而下降.分析表明,云南白药在不同介质中的释放量主要取决于药物和溶液中离子的交换能力;在相同介质中,不同凝胶的药物释放量受溶胀度影响明显.凝胶溶胀速率远大于药物释放速率说明后者主要由扩散过程控制.药物释放的pH敏感性表明该水凝胶具备用作云南白药的口服载体的潜力.     

Study on protein adsorption kinetics to a dye-ligand adsorbent by the pore diffusion model

Adsorption kinetics of bovine serum albumin (BSA) and bovine hemoglobin (bHb) to Cibacron Blue 3GA (CB) modified Sepharose CL-6B has been studied. The effects of liquid-phase ionic strength and CB coupling density on the uptake rates of these two proteins in Tris-HCl buffer (pH 7.5) were evaluated by effective pore diffusivity derived from a pore diffusion model. The results showed that despite their similar molecular masses and sizes, the effects of aqueous-phase ionic strength and CB density on the effective pore diffusivities of BSA and bHb were distinctly different. The effective pore diffusivity of BSA to CB-Sepharose increased significantly with decreasing CB density and increasing liquid-phase ionic strength. This was considered due to the decrease in electrostatic repulsion between the BSA and CB molecules of like charge. That is, the increase in ionic strength and the decrease in CB coupling density reduced the electrostatic hindrance effect on BSA diffusion to CB-Sepharose, facilitating the hindered pore diffusion. In contrast, because of the higher isoelectric point of bHb (7.0) compared to BSA (4.7), bHb suffered little electrostatic hindrance effect during its diffusion to CB-Sepharose. Therefore, the effective pore diffusivity of bHb was unchanged with the change in liquid-phase ionic strength and CB coupling density.     

Swelling Behavior of Semi‐Interpenetrating Polymer Network Hydrogels Based on Chitosan and Poly(acryl amide)

Semi‐interpenetrating polymer networks (semi‐IPNs) composed of chitosan and polyacrylamide (PAAm) hydrogels have been prepared, and the effect of changing pH, temperature, ionic concentration, and applied electric fields on the swelling of the hydrogels was investigated. The swelling kinetics increased rapidly, reaching equilibrium within 60 min. The semi‐IPN hydrogels exhibited a relatively high swelling ratios of 385%–569% at T=25°C. The swelling ratio increased with decreasing pH below pH=7 due to the dissociation of ionic bonds. The swelling ratio of the semi‐IPN hydrogels was pH, ionic concentration, temperature, and electric field dependent. Differential scanning calorimetry (DSC) was used to determine the volume of free water in the semi‐IPN hydrogels, which was found to increase with increasing PAAm content.     

pH and ionic sensitive chitosan/carboxymethyl chitosan IPN complex films for the controlled release of coenzyme A

pH and ionic sensitive interpenetrating polymer network (IPN) complex films based on chitosan (CS) and carboxymethyl chitosan (CM-CS) were prepared by using glutaraldehyde as crosslinking agent. Its structure was characterized by FT-IR, which indicated that the IPN was formed. The films were studied by swelling, weight loss with time, and release of coenzyme A (CoA). It was found that the IPN films were sensitive to pH and ionic strength of the medium. The cumulative release rate of CoA decreased with CoA loading content, ionic strength or crosslinking agent increasing. The composition of the IPN films and pH of release medium also had significant effect on the release of CoA. The differences in the rates and amounts of released CoA may be attributed to the swelling behavior, the degradation of films, and interaction between drug molecule and polymer matrix. These results suggested CS/CM-CS IPN films could be used as drug delivery carrier.     

Adsorption studies of cationic starch onto quartz surface through an electrode-separated piezoelectric sensor

In the construction of an electrode-separated piezoelectric sensor (ESPS), the quartz surface is in direct contact with the liquid phase. The negatively charged quartz crystal surface can adsorb cationic starch. This adsorption process was in situ monitored from the frequency shift of the ESPS. It was shown that the adsorption of cationic starch onto the quartz surface is reversible with respect the dilution of the bulk phase. The adsorption behavior can be described by Langmuir model. The adsorption density and kinetics parameters were estimated from the frequency responses of the ESPS. The influence of pH and ionic strength on adsorption parameters was investigated. It was shown that the influence of pH on the adsorption rate was slight. With increasing ionic strength, the rate constants for adsorption and desorption increase, but the adsorption equilibrium constant and saturation adsorption density decrease. The adsorption equilibrium constant and adsorption density reach a maximum in buffer of pH 10.     

壳聚糖·聚丙烯酸配合物半互穿聚合物网络膜及其对pH和离子的刺激响应

壳聚糖·聚丙烯酸配合物半互穿聚合物网络膜及其对ｐＨ和离子的刺激响应李文俊王汉夫卢玉华汪志亮钟伟（复旦大学高分子科学系聚合物分子工程开放实验室上海２００４３３）关键词高分子间配合物，互穿聚合物网络（ＩＰＮ），水凝胶，壳聚糖，刺激响应敏感性水凝胶是一种...     

表面等离子体子共振技术实时研究蛋白质在修饰表面的静电吸附行为

研究蛋白质在固相表面的静电吸附特性,进而控制蛋白质在修饰表面的静电吸附尤为重要,表面等离子体子共振可以检测金属表面吸附物质厚度和折射率的变化^[1]。这种技术已在研究生物分子相互作用^[2]和考察自组装单层的形成^[3]及蛋白质在固体表面吸附行为^[9-11]等方面得到广泛的应用。对蛋白质在固体表面吸附行为的研究多为考察不同的蛋白质在不同的修饰表面的吸附行为。然而,对蛋白质在修饰表面静电吸附的本质影响因素的研究却少有报道^[4]。本文使用表面等离子体子共振技术实时研究了蛋白质在甲羧基化葡聚糖修饰表面的静电吸附与溶液pH值及离子强度的依赖关系。     

Adsorption of CTAB onto perlite samples from aqueous solutions

In this study, the adsorption properties of unexpanded and expanded perlite samples in aqueous cetyltrimethylammonium bromide (CTAB) solutions were investigated as a function of ionic strength, pH, and temperature. It was found that the amount of cetyltrimethylammonium bromide adsorbed onto unexpanded perlite was greater than that onto expanded perlite. For both perlite samples, the sorption capacity increased with increasing ionic strength and pH and decreasing temperature. Experimental data were analyzed by Langmuir and Freundlich isotherms and it was found that the experimental data were correlated reasonably well by the Freundlich adsorption isotherm. Furthermore, the isotherm parameters (KF and n) were also calculated. The adsorption enthalpy was determined from experimental data at different temperatures. Results have shown that the interaction between the perlite surface and CTAB is a physical interaction, and the adsorption process is an exothermic one.     

苯乙烯/马来酸酐共聚物智能水凝胶的制备与性能

合成了苯乙烯/马来酸酐共聚物接枝聚乙二醇400(PEG400)水凝胶.研究了环境pH、温度、离子强度对该凝胶溶涨性能的影响,并对凝胶的动态溶涨行为进行了分析.结果显示该水凝胶对环境pH、温度、离子强度等变化均作出体积相转变响应,表现出了智能高分子凝胶的特性.     

External Stimuli Responsive Characteristics of Epoxy‐Polyamide/Starch Blend Films

Abstract

Polymeric films of varying crosslink densities and of different molar‐concentrations were prepared from the epoxidized oil/diglycedyl ether of bis‐phenol A (DGEBA) epoxy/polyamide/starch by blending at ambient temperature. The influences of external stimuli such as pH, temperature, ionic strength of the swelling media, and the type of buffer on the equilibrium swelling properties were investigated. Polymeric films showed a typical pH and temperature response such as low‐pH and low‐temperature have maximum swelling while a high‐pH and high‐temperature show almost complete deswelling. A change in the ionic strength of the swelling solution from 0.01 to 0.2 M caused a decrease in the equilibrium degree of swelling of polymeric films. Oscillatory swelling was also observed and investigated in response to changes in the pH of the solution. The morphology of selected polymeric films were explained by scanning electron microscopy (SEM) and correlated with mechanical strength.     

Preparation of Langmuir/Blodgett-cellulose Surfaces by Using Horizontal Dipping Procedure. Application for Polyelectrolyte Adsorption Studies Performed with QCM-D

A method of preparing model cellulose surfaces by the Langmuir–Blodgett (LB) technique with horizontal dipping procedure has been developed. The primary aim for the use of these surfaces was adsorption studies performed with the quartz crystal microbalance with dissipation (QCM-D) instrument. Hydrophobised cellulose (trimethylsilyl cellulose, TMSC) was deposited on the hydrophobic, polystyrene-coated QCM-D crystal. After 15 dipping cycles, the TMSC film fully covers the crystal surface. TMSC can easily be hydrolysed back to cellulose with acid hydrolysis. With this method a smooth, rigid, thin and reproducible cellulose film was obtained. Its morphology, coverage, chemical composition and wetting was further characterised using atomic force microscopy (AFM), X-Ray photoelectron spectroscopy (XPS), and contact angle measurements. The swelling behaviour and the stability of the cellulose film in aqueous solutions at different ionic strengths were studied using the QCM-D instrument. The swelling/deswelling properties of the cellulose film were those expected of polyelectrolytes with low charge density; some swelling occurred in pure water and the swelling decreased when the ionic strength was increased. No significant layer softening was detected during the swelling. The effect of electrolyte concentration and polymer charge density on the adsorption of cationic polyelectrolytes on the cellulose surface was also investigated. At low electrolyte concentration less of the highly charged PDADMAC was adsorbed as compared to low charged C-PAM. The adsorbed amount of PDADMAC increased with increasing ionic strength and a more compact layer was formed while the effect of electrolyte concentration on the adsorption of C-PAM was not as pronounced.     

Influence of cross-link density on rheological properties of temperature-sensitive microgel suspensions

The influence of the cross-link density on rheological properties of thermosensitive microgels was investigated. The temperature-sensitive hydrogel particles consisted of poly (N-isopropylacrylamide) (PNiPAM) chemically cross-linked with several different molar ratios of N,N′-methylenebisacrylamide. The variation of cross-link density leads to soft spheres that possess a different particle interaction potential and a different swelling ratio. With increasing temperature the microgel particles decrease in size and with it the effective volume fraction, which leads to strong changes in rheological properties. The relative zero-shear viscosity and the plateau modulus at different temperatures superpose to mastercurves when plotted versus the effective volume fraction. Up to an effective volume fraction of 0.5 the microgels behaved like hard spheres and the maximum volume fraction, as determined from the divergence of the zero-shear viscosity, was mainly dominated by the polydispersity of the spheres and not by the cross-link density. The plateau modulus, on the other hand, revealed soft-sphere behavior and the interaction potential became softer with decreasing cross-linker content. Received: 15 December 1999 Accepted: 15 February 2000     

Effect of ionic strength and type of ions on the structure of water swollen polyelectrolyte multilayers

This study addresses the effect of ionic strength and type of ions on the structure and water content of polyelectrolyte multilayers. Polyelectrolyte multilayers of poly(sodium-4-styrene sulfonate) (PSS) and poly(diallyl dimethyl ammonium chloride) (PDADMAC) prepared at different NaF, NaCl and NaBr concentrations have been investigated by neutron reflectometry against vacuum, H(2)O and D(2)O. Both thickness and water content of the multilayers increase with increasing ionic strength and increasing ion size. Two types of water were identified, "void water" which fills the voids of the multilayers and does not contribute to swelling but to a change in scattering length density and "swelling water" which directly contributes to swelling of the multilayers. The amount of void water decreases with increasing salt concentration and anion radius while the amount of swelling water increases with salt concentration and anion radius. This is interpreted as a denser structure in the dry state and larger ability to swell in water (sponge) for multilayers prepared from high ionic strengths and/or salt solution of large anions. No exchange of hydration water or replacement of H by D was detected even after eight hours incubation time in water of opposing isotopic composition.