Enantioselective Oxidative Aerobic Dealkylation of N‐Ethyl Benzylisoquinolines by Employing the Berberine Bridge Enzyme

N‐Dealkylation methods are well described for organic chemistry and the reaction is known in nature and drug metabolism; however, to our knowledge, enantioselective N‐dealkylation has not been yet reported. In this study, exclusively the (S)‐enantiomers of racemic N‐ethyl tertiary amines (1‐benzyl‐N‐ethyl‐1,2,3,4‐tetrahydroisoquinolines) were dealkylated to give the corresponding secondary (S)‐amines in an enantioselective fashion at the expense of molecular oxygen. The reaction is catalyzed by the berberine bridge enzyme, which is known for C? C bond formation. The dealkylation was demonstrated on a 100 mg scale and gave optically pure dealkylated products (ee>99 %).     

Chemoselective anti-Markovnikov hydroamination of α,β-ethylenic compounds with amines using montmorillonite clay

The catalytic activity of montmorillonite clays as a catalyst for the hydroamination of α,β-ethylenic compounds with amines was tested. Aniline and substituted anilines reacted with α,β-ethylenic compounds in the presence of catalytic amount of commercially available clay to afford exclusively anti-Markovnikov adduct in excellent yields. Aniline reacted with ethyl acrylate to yield only anti-Markovnikov adduct N-[2-(ethoxycarbonyl)ethyl]aniline (mono-addition product). No Markovnikov adduct (N-[1-(ethoxycarbonyl)ethyl]aniline and double addition product N,N-bis[2-(ethoxycarbonyl)ethyl]aniline were formed under selected reaction conditions. For a better exploitation of the catalytic activity in terms of increased activity and improved selectivity for the mono-addition product, the reaction parameters were optimized in terms of temperature, solvent, reactant mole ratio. Under optimized reaction conditions, montmorillonite clay K-10 showed a superior catalytic performance in the hydroamination of ethyl acrylate with aniline with a conversion of aniline to mono-addition product (almost 100% chemoselectivity) with a high rate constant 0.3414 min⁻¹ compared to the reported protocols. The dependence of conversion of aniline over different types of montmorillonite clays (K-10, K-20, K-30, Al-Pillared clay and untreated clay) has also been discussed. The activities of clay for the hydroamination of different aromatic and aliphatic amines have also been investigated. Under harsh reaction conditions (increased temperature and long reaction time) small amounts of di-addition products were observed. The kinetics data has been interpreted using the initial rate approach model.     

Ruthenium(III)‐catalyzed oxidation of cyclopentanol and cyclohexanol by N‐bromoacetamide

Kinetic investigations on Ru(III)‐catalyzed oxidation of cyclopentanol and cyclohexanol by acidic solution of N‐bromoacetamide (NBA) in the presence of mercury(II) acetate as a scavenger have been carried out in the temperature range of 30–45°C. Similar kinetics was followed by both the cyclic alcohols. First‐order kinetics in the lower concentration range of NBA was observed to tend to zero order at its higher concentrations. The reaction exhibits a zero‐order rate dependence with respect to each cyclic alcohol, while it is first order in Ru^III. Increase in [H⁺] and [Cl^?] showed positive effect, while successive addition of acetamide exhibited negative effect on the reaction rate. Insignificant effect of sodium perchlorate, D₂O, and mercury(II) acetate on the reaction velocity was observed. Cationic bromine has been proposed as the real oxidizing species. Various thermodynamic parameters have been computed. A suitable mechanism in agreement with the kinetic observations has been proposed. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 275–281, 2005     

Ethyl 1,4‐Dihydro‐4‐oxo‐1,8‐naphthyridine‐3‐carboxylates by a Tandem SNAr‐Addition‐Elimination Reaction

A series of N‐substituted 1,4‐dihydro‐4‐oxo‐1,8‐naphthyridine‐3‐carboxylate esters has been prepared in two steps from ethyl 2‐(2‐chloronicotinoyl)acetate. Treatment of the β‐ketoester with N,N‐dimethylformamide dimethyl acetal in N,N‐dimethylformamide (DMF) gave a 95% yield of the 2‐dimethylaminomethylene derivative. Subsequent reaction of this β‐enaminone with primary amines in DMF at 120^oC for 24 h then afforded the target compounds in 47–82% yields by a tandem S_NAr‐addition‐elimination reaction. Synthetic and procedural details as well as a mechanistic rationale are presented.     

Direct carboxylation reaction of methane with CO by a Yb(OAc)3/Mn(OAc)2/NaClO/H2O catalytic system under very mild conditions

A new method of synthesis of acetic acid in water has been developed from the carboxylation of methane with carbon monoxide using lanthanide catalysts. Ytterbium(III) acetate has been found to be the most active catalyst among the compounds of the lanthanide series in the carboxylation reaction of methane with carbon monoxide. Sodium hypochlorite or hydrogen peroxide was used as the oxidant in this reaction. Sodium hypochlorite exhibited more favorable activity than hydrogen peroxide in the reaction. The catalytic activity was improved by the addition of transition-metal salts such as manganese(II) acetate. The best result has been found at a ratio of manganese(II) acetate to ytterbium(III) acetate of 1:10. The optimum reaction conditions (reaction temperature, 40 °C; time, 20 h; methane, 20 atm; carbon monoxide, 5 atm) have been obtained. © 1998 John Wiley & Sons, Ltd.     

New Highlights in the Synthesis of 4‐Aryl‐1,4‐dihydropyrazines

The 4‐aryl‐1,4‐dihydropyrazines were prepared via the cyclization of N,N‐bisalkylated anilines with ammonium acetate. These reactions were aided by improvements in the synthesis of N,N‐bisalkylated anilines which were alkylated with anilines using ethyl 2‐diazo acetoacetate in a reaction catalyzed by rhodium acetate in the absence of oxygen. A possible mechanistic route is postulated on the basis of the isolation of the N‐alkylation intermediates, which were determined to be N‐aryloxamates by ¹H NMR data and X‐ray diffraction.     

A Precautionary Note Regarding Derivatization Of Secondary Amines With Dialkyeacetals Of Formamide Other Than The Diethyl Derivative A Correction

Abstract

In an earlier communication we reported GC-MS studios on the reaction products of secondary amino tricyclics and dimethylformamide. ¹ The diethyl acctal reaction products were identified as N-ethyl derivatives on the basis of mass spectroscopic analysis. In a follow-up study, we reported the same reaction products were formed from other DMF-dialkyl acetals, such as dimethyl and dipropyl acetals. ² In view of this unusual reaction we reinvestigated the structure of the reaction products utilizing alternative spectroscopic methods, viz. NMR and IR, and present a correction to our earlier work ()Desipramine (1 mg) was heated with DMF-diethyl acetal (100 μ 1) at 80°C. for 15 min. The product: was dissolved in ethyl acetate (5 ml), extracted into 1 ml of 0.5 N HCl and back extracted into ethyl acetate at pH 11.0. The organic extract was dried over anhydrous sodium sulfate and evaporated to dryness under nitrogen. The resulting residue was used directly in the NMR and IR studies.     

The use of 2,2′-thiodiethanol in the fluorimetric determination of secondary amines with o-phthalaldehyde and 2-mercaptoethanol

The fluorimetric determination of secondary amines based on conversion with sodium hypochlorite to primary amines and the o-phthalaldehydemercaptoethanol (OPA) reagent is discussed. Interference by excess hypochlorite (e.g., oxidation of OPA or conversion of primary amines to chloramines) were suppressed by 2,2′-thiodiethanol. Two spectrophotofluorimetric method are reported, one for aromatic and the other for aliphatic secondary amines. These methods permitted determinations at nanomolar levels; relative standard deviations were 4% for 5 nmol of N-methylaniline and 13% for 5 nmol of sarcosine.     

Oxidation of L-aspartic acid and L-glutamic acid by manganese(III) ions in aqueous sulphuric acid,acetic acid,and pyrophosphate media: A kinetic study

Kinetics of oxidation of L-aspartic acid and L-glutamic acid by manganese(III) ions have been studied in aqueous sulphuric acid, acetic acid, and pyrophosphate media. Manganese(III) solutions were prepared by known electrolytic/chemical methods in the three media. The nature of the oxidizing species present in manganese(III) solutions was determined by spectrophotometric and redox potential measurements. The reaction shows a variable order in [manganese(III)]_o: the order changes from two to one as the reactive oxidizing species changes from an aquo ionic form to a complex form. There is a first-order dependence of the rate on [amino acid]_o in all the three media while the other common features include an inverse dependence each on [H⁺] and on [manganese(II)]. Effects of varying ionic strength and solvent composition were studied. Added anions such as pyrophosphate, fluoride, or chloride alter the reaction rate and mechanism by changing the formal redox potential of Mn(III)-Mn(II) couple. Activation parameters have been evaluated using the Arrhenius and Eyring plots. Mechanisms consistent with the kinetic data have been proposed and discussed. © 1995 John Wiley & Sons, Inc.     

Synthesis of α-(aminomethylene)-9H-purine-6-acetic acid derivatives

α-(Aminornethylene)-9H-purine-6-acetamide ( 3a ) and the corresponding ethyl acetate 9 have been synthesized by catalytic hydrogenation of 6-cyanomethylenepurine derivatives 2 and 7 which were obtained by the substitution of 6-chloropurine derivatives with α-cyanoacetamide and ethyl cyanoacetate, respectively. Substitution of α-(aminomethylene)-9-(tetrahydrofuran)-9H-purine-6-acetamide ( 3b ) with amines gave the corresponding N-alkyl- and N-arylamines 5 , which were treated with acid to give N-substituted α-(aminomethylene)-9H-purine-6-acetamides 6 . Substitution of 9 with amines gave the corresponding N-alkyl- and N-aryl substituted amines 10 .     

Low-Temperature Reactions of α-Bromopropanoyl Chloride with Lithium Derivative of Ethyl Acetate

The reaction of 2-bromopropanoyl chloride with lithium ethyl acetate generated in situ by the reaction of equimolar amounts of lithium diisopropylamide with ethyl acetate forms, depending on the conditions (temperature, time, reagent ratio), diethyl 2,2′-(3-methyloxirane-2,2-diyl)diacetate, 2,2-dibromo-N,N-diisopropylpropanamide, and ethyl (5-methyl-4-oxo-4,5-dihydrofuran-2-yl)acetate as minor by-products along with the expected acylation product ethyl 4-bromo-3-oxopentanoate. The reaction with 2 or 5 equiv of lithium ethyl acetate (–78°C → –20°C) gave, together with the mentioned α-bromo ester, ethyl (5-methyl-4-oxo-4,5-dihydrofuran-2-yl)acetate formed as a result of transformations of the adduct of the second LiCH₂CO₂Et molecule and ethyl-4-bromo-3-oxopentanoate. The reaction 2-bromopropanoyl chloride with sodium malonic ester involves acylation of enol form of the primary expected acylation product to afford dimethyl |2-bromo-1-[(2-bromopropanoyl)oxy]propylidene-malonate.

     

Synthesis and characterization of some <Emphasis Type="Italic">vic</Emphasis>-dioxime and its mononuclear complexes

In this study, acetophenone is used as a basis substance. ω-Isonitrosoacetophenone has been synthesized from nitrosyl with amyl nitrite of acetophenone in the presence of sodium ethoxide. Subsequently, anti-phenylglyoxime has been prepared by reacting ω-isonitrosoacetophenone with hydroxylamine and sodium acetate in a ethanolic media. Chlorophenylglyoxime has been obtained from reaction with chlorine gases. Then, three aminophenylglyoxime (ligands) have been prepared by the reaction of chlorophenylglyoxime and the corresponding amines. The Ni(II), Co(II), and Cu(II) complexes with BF²⁺-bridge of anilinophenylglyoxime and 2,4-dimethylanilinophenylglyoxime were prepared. Then polymeric metal complexes with BF²⁺-bridge of dopamiophenylglyoxime were prepared. Their structures were identified by FT-IR, ¹H NMR, and ICP-AES spectral data, elemental analysis and magnetic measurements. The article was submitted by the authors in English. An erratum to this article is available at .     

Influence of Cu(II) Ions on the Mechanism of the Ring Transformation of S‐(2‐Oxotetrahydrofuran‐3‐yl)‐N‐(4‐methoxyphenyl)isothiouronium Bromide

The effect of additional Cu(II) ions on the rate of transformation of S‐(2‐oxotetrahydrofuran‐3‐yl)‐N‐(4‐methoxyphenyl)isothiouronium bromide ( 1 ) into 5‐(2‐hydroxyethyl)‐2‐[(4‐methoxyphenyl)imino]‐1,3‐thiazolidin‐4‐one ( 2 ) has been studied in aqueous buffer solutions. The reaction acceleration in acetate buffers is caused by the formation of a relatively weakly bonded complex (K_c = 600 L·mol^?1) of substrate with copper(II) acetate in which the Cu(II) ion acts as a Lewis acid coordinating the carbonyl oxygen and facilitating the intramolecular attack, leading to the formation of intermediate T^±. The formation of the complex of copper(II) acetate with free isothiourea in the fast preequilibrium (K_c) is followed by the rate‐limiting transformation (k_Cu) of this complex. At the high concentrations of the acetate anions, the reaction is retarded by the competitive reaction of these ions with copper(II) acetate to give an unreactive complex [Cu(OAc)₄]^2?_. The influence of Cu(II) ions on the stability of reaction intermediates and the leaving group ability of the alkoxide‐leaving group compared to the Cu(II)‐uncatalyzed reaction is also discussed.     

Ethyl 1,4‐dihydro‐4‐oxo‐3‐quinolinecarboxylates by a tandem addition‐elimination‐SNAr reaction

The ethyl 1,4‐dihydro‐4‐oxo‐3‐quinolinecarboxylate ring structure, important in several drug compounds, has been prepared in two steps from ethyl 2‐(2‐fluorobenzoyl)acetate. Treatment of this β‐ketoester with N,N‐dimethylformamide dimethyl acetal gives a 97% yield of the 2‐dimethylaminomethylene derivative. Reaction of this β‐enaminone with primary amines in N,N‐dimethylformamide at 140°C for 48 h then affords the 1,4‐dihydro‐4‐oxo‐3‐quinolinecarboxylate esters in 60–74% yields by a tandem addition‐elimination‐S_NAr reaction. The synthesis of the starting material as well as procedural details and a mechanistic scenario are presented. J. Heterocyclic Chem., (2011).     

Aminophosphine ligands: synthesis,coordination chemistry,and activity of their palladium(II) complexes in Heck and Suzuki cross-coupling reactions

The reaction of 4-aminodiphenylamine or 2-aminofluorene with two equivalents of PPh₂Cl in the presence of Et₃N gives new bis(diphenylphosphino)amines N,N-bis(diphenylphosphino)-4-aminodiphenylamine 1 and N,N-bis(diphenylphosphino)-2-aminofluorene 2 in good yields. Oxidation of 1 or 2 with hydrogen peroxide, elemental sulfur or gray selenium affords the corresponding chalcogen derivatives. The palladium and platinum complexes of these P–N–P donor ligands were prepared by the reaction of the bis(phosphino)amines with MCl₂(cod) (M = Pd or Pt, cod = cycloocta-1,5-diene). All the new compounds have been characterized by analytical and spectroscopic methods, including ¹H-³¹P NMR, ¹H-¹³C HETCOR, or ¹H-¹H COSY correlation experiments. The Pd(II) complexes were investigated as catalysts in the Suzuki and Heck reactions; both showed good catalytic activity affording high yields of the desired products.     

Syntheses of N-alkyl, N,N-dialkyl, and N-(4-substituted phenyl) O-ethyl thioncarbamates: a kinetic study

Abstract  

The kinetics of the syntheses of N-alkyl, N,N-dialkyl, and N-(4-substituted phenyl) O-ethyl thioncarbamates from sodium ethyl xanthogenacetate, ten alkylamines, and eight substituted anilines were studied at 25, 30, 35, and 40 °C. The reactions were found to follow second-order kinetics. The kinetic (Arrhenius) parameters, such as the activation energy and the frequency factor, as well as the Eyring parameters, such as the standard entropy, the standard Gibbs energy, and the standard enthalpy of activation, were calculated from the second-order rate constants. The mechanism of the reaction was postulated based on the kinetic studies presented and the optimization of the reaction mechanism using the MOPAC PM6 semi-empirical method.     

Chlorination of N-Methylacetamide: A kinetic study

In the pH range 4.3–13, the reaction between N-methylacetamide (NMA) and sodium hypochlorite in dilute aqueous solution to give N-chloro-N-methylacetamide (CINMA) was found to be far slower than analogous reactions affording N-chloramines or N-chloroamino acids. The rate expression for chlorination was first-order each in [NMA] and [Cl_tot] (the total concentration of chlorinating species). A rate constant calculated for chlorination by each chlorinating species indicated that the order of increasing reactivity was HClO < ClO^? < Cl₂ < CH₃COOCl (formed in the presence of acetic/acetate buffer). At pH > 7 the reaction rate was unaffected by variations in [Cl^?] or pH, but under acidic conditions the rate increased with [Cl^?] and decreasing pH. Regardless of pH, the reaction rate was not affected by changes in ionic strength. The influence of temperature on the reaction rate was also studied which allowed calculation of thermodynamic activation parameters for the N-chlorination reaction. © 1995 John Wiley & Sons, Inc.     

Kinetics of the N-chlorination of 2-aminobutyric, 3-aminobutyric, 3-aminoisobutyric and 4-aminobutyric acids in aqueous solution

We studied the kinetics of the N-chlorination of 2-aminobutyric, 3-aminoisobutyric, and 4-aminobutyric acids by sodium hypoclorite in strongly alkaline aqueous solution. As in the case of other amines, the rate of formation of the four N-chloroamino acids was proportional to the concentrations of hypochlorite and amino acid, and inversely proportional to the concentration of hydroxyl ions. A reaction mechanism compatible with these results is proposed and discussed. © John Wiley & Sons, Inc.     

Polymers Bearing an S‐Sulfate Side Chain. Oxidative Crosslinking of the Copolymer of Vinyl Mercaptoacetate S‐Sulfate and 2‐Hydroxyethyl Acrylate

Vinyl mercaptoacetate S‐sulfate sodium salt (VMAS) was prepared with a yield of 74% from a reaction of vinyl chloroacetate and sodium thiosulfate. Polymerization of VMAS with 2‐hydroxyethyl acrylate (HEA) in the presence of ammonium persulfate and N,N,N ′,N ′‐tetramethylethylenediamine afforded a colorless copolymer bearing the S—SO₃^– Na⁺ group in 3.2–4.3 mol‐% and having a MW of 2.4–13×10⁴. The polymer was water‐soluble but, upon treatment with an oxidizing agent, was transformed quickly into a water‐tolerant material. It again became water‐soluble on the addition of a reducing agent. The unique solubility alternation was explained by the formation and fission of S—S bond crosslinking in the polymer.     

Sulfonated salicylidene thiadiazole complexes with Co (II) and Ni (II) ions as sustainable corrosion inhibitors and catalysts for cross coupling reaction

Condensation of 2,5‐dihydrazinyl thiadiazole with 5‐sodium sulfonate salicylaldehyde afforded dibasic tetradentate pincer N,O,O,N‐salicyldiene thiadiazole ligand (H₂Sanp). The novel dipolar ligand formed para‐magnetic pincer complexes within Co (II) and Ni (II) ions (Co‐Sanp and Ni‐Sanp) under sustainable conditions. The water‐soluble ligand and its metal‐complexes were estimated by mass, IR and UV–Visible spectroscopy, EA (elemental analyses), TGA (Thermogravimetric analyses), magnetic susceptibility, and conductivity measurements. The catalytic reactivity of Co‐Sanp and Ni‐Sanp were evaluated in the Suzuki and Buchwald‐Hartwig cross coupling reaction in aqueous‐methanol binary mixtures. Both reactions of boronic acid or aryl amines with aryl halides gave high chemoselective yield of C―C or C―N product. The inhibition characteristics of H₂Sanp and its Ni‐ and Co‐complexes were performed for the C‐steel corrosion in 1.0 M HCl using electrochemical measurements and surface analysis methods. These methods indicated that the synthesized compounds have served as efficient mixed‐type corrosion inhibitors and their adsorption on the steel surface obeyed isotherm model of Langmuir. Co‐Sanp inhibitor displays the best corrosion inhibition efficiency, and the capacity is up to 97.11% at of 250 mg L^?1. Surface analysis confirms formation of protective layer on the C‐steel surface.