氟双相催化合成N-异丙基邻苯二甲酰亚胺

用苯-二-[4-(十三氟正辛基)苯基]膦和二-(十三氟正辛基)重氮二羧酸酯作氟双相催化剂,在THF中由邻苯二甲酰亚胺和异丙醇合成N-异丙基邻苯二甲酰亚胺。反应条件为:邻苯二甲酰亚胺0.14 mmol,n(胺)∶n(醇)=1.0∶1.5,n(胺)∶n(催化剂)=1.0∶1.5,室温反应3.0 h,产率83.4%,纯度99.5%(GC分析)。     

聚丁二酸乙二醇酯的合成

以十氢萘为溶剂,丁二酸和乙二醇直接聚合,合成了高相对分子质量的聚丁二酸乙二醇酯(PES),其结构经1H NMR和IR表征。考察了单体比例对聚合反应的影响,结果表明,当n(乙二醇)∶n(丁二酸)=1.01∶1.00时,合成的PES数均相对分子质量最高(48 640),产率93%。同时测定了PES的力学性能和热性能。     

聚合物假冠醚研究（Ⅰ）单体乙二醇二苯醚的合成与表征

本文以乙二醇为底物,通过中间体乙二醇二苯磺酸酯,合成出了乙二醇二苯醚。对两合成产物进行了红外光谱、薄层色谱。溶解性能及结晶分析,实验结果表明,在乙二醇二苯磺酸酯的合成中,因为使用苯磺酰氯代替了传统的对甲苯磺酰氯磺酰化试剂,并用氯仿做稀释剂以控制催化剂吡啶的恰当使用量,使合成不但经济而且获得82．5％,的较高收率,在乙二醇二苯醚的合成中,采用回流,蒸馏交替使用的实验方法,同时用馏出物沸点数值监控和及时排除体系的水份,使产率达到78．0％。     

室温合成二硫化二正丁基黄原酸酯及其表征

以正丁醇、氢氧化钠和二硫化碳为原料,水作溶剂合成正丁基黄原酸钠,再与一氯化硫反应,室温条件下合成对称的二硫化二正丁基黄原酸酯,并探讨了反应条件对合成正丁基黄原酸钠和二硫化二正丁基黄原酸酯产率的影响。通过红外(FT-IR)、核磁(1H NMR)、质谱(MS)及元素分析等技术手段确定了产物的结构。优化的合成条件为:n(正丁基黄原酸钠)∶n(S2Cl2)=2∶1.1,温度为室温,溶剂为THF,反应时间为2 min,产率可达83.2%,反应条件温和,反应迅速、收率高。     

硫酸氢钠催化合成羧酸环己酯

硫酸氢钠能够代替硫酸作为酯化作用的催化剂。研究了一水硫酸氢钠催化合成丙酸环己酯的反应条件。当 mol羧酸 ∶mol环己醇 ∶ mol硫酸氢钠 =2 .3∶ 1∶ 0 .0 7,以环己烷为溶剂 ,合成了甲酸环己酯、乙酸环己酯、丙酸环己酯和丁酸环己酯 ,收率为 77.9%～ 89.0 %     

腈类化合物的新法合成

本文报道腈类化合物的一种新合成方法。以各种醛(2a～2q)为原料,分别与盐酸羟胺反应得到一系列醛肟中间体(3a～3q),然后在叠氮磷酸二苯酯(DPPA)和1,8-二氮杂二环十一碳-7-烯(DBU)作用下,得到一系列腈类化合物(1a～1q)。中间体及产物结构均经过¹H NMR和ESI-MS表征。其中,中间体3i、3l及产物1q结构进一步通过X-单晶衍射确证。并以2-硝基苯甲醛肟(3a)和2-硝基苯腈(1a)的合成为模型,考察反应的主要影响因素。确定产物腈的合成条件为：DPPA用量为n(DPPA)∶n(化合物3a)=1.1∶1,DBU用量为n(DBU)∶n(3a)=1.2∶1,在25℃反应30 min,产物2-硝基苯腈(1a)收率为68.5%。该合成方法工艺简单、反应时间短、产物收率高、底物适用性广、原料廉价易得,为腈类化合物的合成提供了一种高效的新方法。     

二氧化硅负载硫酸氢钠催化合成壬酸乙二醇单酯

研究了以二氧化硅负载硫酸氢钠为催化剂,壬酸和乙二醇为原料合成壬酸乙二醇单酯的工艺.考察了酸醇物质的量、催化剂用量、反应时间、反应温度等对壬酸酯化率的影响,结果表明,合成壬酸乙二醇单酯的优化条件为:壬酸与乙二醇的物质的量为1∶3,催化剂的用量为反应物料总质量的5%,反应时间为4h,反应温度为90℃,在此条件下,酯化率可达92%以上,通过红外光谱验证了目标产物.催化剂具有一定的重复使用活性.     

新型苯并噻唑离子液体的合成及其催化蓖麻油酸酯化研究

以价格低廉的苯并噻唑为原料,合成了4种新型功能化布朗斯特酸性离子液体:苯并噻唑硫酸氢盐([HBth]-HSO_4)、苯并噻唑磷酸二氢盐([HBth]H_2PO_4)、苯并噻唑高氯酸盐([HBth]ClO_4)、苯并噻唑硝酸盐([HBth]NO_3),其结构经FT-IR、HRMS、NMR表征得到确认.考察了4种酸性离子液体在蓖麻油酸和乙二醇丁醚(EGBE)酯化反应中的催化活性,并与以浓硫酸为催化剂的催化体系相对照.结果表明:当n(蓖麻油酸)∶n(乙二醇丁醚)=1∶1.15,离子液体催化剂用量为蓖麻油酸重量的2%,反应温度90℃,反应时间5 h,酯化率可达98.8%,离子液体催化剂经真空干燥重复使用10次后,仍具有较高的催化活性.还考察了以苯并噻唑硫酸氢盐为催化剂催化合成系列蓖麻油酸二元醇醚酯和短链脂肪酸酯,也获得了较高的酯化率,且离子液体均能与酯产物自动分相.与传统硫酸催化酯化相比,此类离子液体催化酯化具有生产成本低、过程清洁、使用周期长等优点,完全可以替代传统浓硫酸催化蓖麻油酸酯化反应.     

直接酯化法合成聚2,5-呋喃二甲酸乙二酯

以2,5-呋喃二甲酸(FDCA)和乙二醇(EG)为原料,草酸亚锡为催化剂,采用直接酯化法制备了聚2,5-呋喃二甲酸乙二酯(PEF)。考察了酯化反应、酯化产物、缩聚反应及缩聚产物的影响因素,结果表明,草酸亚锡在该体系中既可催化酯化反应又可催化缩聚反应,当n(FDCA)∶n(EG)=1∶1.6、草酸亚锡摩尔分数为0.1%、酯化温度为210℃、缩聚温度为240℃、缩聚反应时间为480 min、磷酸三甲酯摩尔分数为0.03%时,酯化程度最高(酯化产物的酸值在94%以上),缩聚产物相对分子量最高(比浓粘度达到1.29 dL/g),端羧基含量最低(34.3 mol/t);采用FTIR和1H NMR对目标产物的结构进行了表征。     

金属醋酸盐催化合成聚丁二酸乙二醇酯预聚体和碳酸二甲酯

研究了醋酸盐催化碳酸乙烯酯（EC）和丁二酸二甲酯（DS）同时合成聚丁二酸乙二醇酯 (PES) 预聚体和碳酸二甲酯(DMC)的耦合反应新工艺。 采用气相色谱-质谱联用定性分析馏分组成;红外光谱、核磁共振表征了预聚物的结构;采用乌式粘度计测试了预聚物的特性粘数;气相色谱定量测定馏分碳酸二甲酯的收率以考察耦合反应的进度。 以对该反应催化效果最佳的无水醋酸锂为催化剂考察了物料配比、反应温度、反应时间、催化剂用量对耦合反应的影响,结果表明,最佳的工艺条件为：反应温度195～200 ℃,n(EC)∶n(DS)=2∶1,n(cat)∶n(EC+DS)=0.02∶1,反应时间为2 h,耦合反应所得的DMC收率为48.0%,聚丁二酸乙二醇酯预聚物的特性粘数为0.3787。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.