Specifics of hydrothermal synthesis of oriented zinc oxide nanorods on metallic zinc substrates

Zinc oxide nanostructures are prepared hydrothermally in the presence of ethylenediamine (EDA). The morphology and photoluminescent properties of final products are studied as functions of synthesis temperature, synthesis time, and EDA concentration. A decrease in EDA concentration to 30% favors the formation of more perfect and more ordered structures. Blank experiments show that hydrothermal synthesis without organic reagents does not produce nanostructures. When samples are sheltered from convective flows in the cell, the rod growth direction is dictated by the grain orientation in the foil. When nanorods are formed under low supersaturations (in the absence of convective flows), oxygen nonstoichiometry arises in the nanorods and appears in photoluminescence spectra as increased peak intensities in the green spectral range.     

Microwave assisted synthesis of bridgehead alkenes

A new, concise method to synthesize triene precursors for the type 2 intramolecular Diels-Alder reaction has been developed. Microwave irradiation of the trienes provides a convenient method for the synthesis of bridgehead alkenes. Higher yields, shorter reaction times, and lower reaction temperatures provide a general and efficient route to this interesting class of molecules.     

Microwave assisted synthesis of Py-Im polyamides

Microwave synthesis was utilized to rapidly build Py-Im polyamides in high yields and purity using Boc-protection chemistry on Kaiser oxime resin. A representative polyamide targeting the 5'-WGWWCW-3' (W = A or T) subset of the consensus Androgen and Glucocorticoid Response Elements was synthesized in 56% yield after 20 linear steps and HPLC purification. It was confirmed by Mosher amide derivatization of the polyamide that a chiral α-amino acid does not racemize after several additional coupling steps.     

Microwave assisted stereospecific synthesis of d-erythro-l-gluco-nonulose

A convenient, highly efficient synthesis of d-erythro-l-gluco-nonulose from a new 2-C-(hydroxymethyl) branched-chain aldose is presented. The nucleophilic addition of the appropriately protected aldose to formaldehyde afforded 2-C-(hydroxymethyl)-d-erythro-l-manno-octose. The branched sugar bearing a CH₂OH group at C-2 provides access to a nine-carbon sugar in a single step through a stereospecific isomerization. The isomerization exploited the catalytic effect of molybdate ions and microwave irradiation. The structure of the product was analyzed by NMR spectra and quantum-chemical DFT calculations. DFT-computed proton–proton coupling constants were found to be comparable with the experimentally obtained coupling constants and agreed with the pyranose form of this branched-chain aldose.     

Microwave assisted hydrothermal synthesis of tin niobates nanosheets with high cycle stability as lithium-ion battery anodes

SnNb₂O₆ and Sn₂Nb₂O₇ nanosheets were synthetized via microwave assisted hydrothermal method, and innovatively employed as anode materials for lithium-ion battery. Compared with Sn₂Nb₂O₇ and the previously reported pure Sn-based anode materials, the SnNb₂O₆ electrode exhibited outstanding cycling performance.     

Microwave assisted synthesis of enantiomerically pure allylboronates

Stable allylboronates with a stereogenic centre α to the boronic ester moiety represent versatile reagents for stereoselective synthesis of homoallylic alcohols. Use of microwave irradiation in desilylation and sigmatropic rearrangement reactions allows rapid synthesis of α-chiral allylboronates utilized in the highly diastereo- and enantioselective synthesis of (Z)-configured homoallylic α-hydroxy esters by allyl additions to ethyl glyoxylate.     

Microwave assisted synthesis of novel annealed porphyrins

New pyrrole derivatives (isoindoles) have been readily prepared by the reaction of an α,β-unsaturated sulfone with ethyl isocyanoacetate in the presence of tert-BuOK in good yields. The isoindoles are converted into new porphyrins which undergo retro Diels-Alder reactions under microwave irradiation at 250 °C for 4 min to give novel annealed porphyrins in quantitative yields.     

Microwave assisted synthesis of spiro-2,5-diketopiperazines

A general and efficient method for the synthesis of spiro-2,5-diketopiperazines (spiro-DKPs) is described. Cyclization of Boc-protected dipeptides containing spiro-amino acids by microwave assisted heating in water furnished the corresponding spiro-DKPs. The spiro-amino acids were prepared by combining stereoselective alkylation reactions using the Schöllkopf methodology for amino acid construction with Grubbs ring-closing metathesis (RCM) methodology using ruthenium complexes. The RCM reactions and all subsequent transformations to the spiro-DKPs were run with microwave assisted heating, resulting in high yields and short reaction times for all steps.     

Jute stick extract assisted hydrothermal synthesis of zinc oxide nanoflakes and their enhanced photocatalytic and antibacterial efficacy

In this paper, we used green and hydrothermal methodology to prepare zinc oxide (ZnO) nanoflakes (NFs) with jute stick extract (J–ZnO NFs) as growth substrate. The prepared materials were characterized using different analytical techniques including ultraviolet–visible spectroscopy (UV–vis), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The characteristic absorption peak for ZnO NFs and J–ZnO NFs were observed from the UV–vis spectrum at 373 and 368 nm respectively. The hexagonal wurtzite crystal structure of ZnO NFs and J–ZnO NFs was confirmed by XRD analysis. FESEM and TEM analyses of synthesized J–ZnO NFs confirmed their NFs shape and collectively flower-like structure formation by the assembly of NFs of J–ZnO on cellulose of jute stick extract substrate. The FTIR analysis revealed the functional groups of jute stick extract biomolecules, mainly cellulose, are responsible for the formation of collectivel flower like J–ZnO NFs structure. The XPS analysis revealed the surface and chemical compositions (Zn, C, and O) of J–ZnO NFs. The photocatalytic performance of ZnO NFs and J–ZnO NFs samples was carried out by the degradation of methylene blue (MB) dye solution under UV light irradiation. The degradation efficiency of ZnO NFs and J–ZnO NFs was obtained 79 % and 89 %, respectively, for 5 h. Notably, the degradation efficiency of the J–ZnO NFs was 98 % after 8 h of irradiation, which is very inspiring. The both NFs exhibited first-order kinetics with MB photodegradation. We also examined the possible antibacterial activity of both samples against Escherichia coli (E. coli) pathogens, which demonstrated a significant result with a 17 mm and 19 mm zone of inhibition by ZnO NFs and J–ZnO NFs respectively.     

Microwave synthesis of zinc sulfite and porous zinc oxide microrods

ZnSO(3) microrods with uniform size and shape can be prepared under microwave irradiation at much higher speed than a conventional heating bath, usually in minutes. The annealing of ZnSO(3) microrods produced porous ZnO microrods with pore size between 50-200 nm.     

Microwave assisted synthesis of an unusual dinitro phytochemical

A novel dinitro secondary metabolite, 2-nitro-4-(2^′-nitroethenyl)phenol from a marine source, has been prepared via highly accelerated, microwave assisted, nitration reactions using mild reagents. ipso-Substitution of a carboxy group by a nitro group is discussed.     

Microwave assisted synthesis of triazolobenzoxazepine and triazolobenzoxazocine heterocycles

Intramolecular click chemistry was utilized to effect synthesis of the benzofused, triazole ring systems. The trimethylsilyl group was found to impede the reaction progress, and therefore, conditions employing in situ removal of the TMS group coupled with microwave irradiation give the penultimate targets with good conversion.     

Microwave assisted solvent free synthesis of 1,3-diphenylpropenones

Background  

1,3-Diphenylpropenones (chalcones) are well known for their diverse array of bioactivities. Hydroxyl group substituted chalcones are the main precursor in the synthesis of flavonoids. Till date various methods have been developed for the synthesis of these very interesting molecules. Continuing our efforts for the development of simple, eco-friendly and cost-effective methodologies, we report here a solvent free condensation of aryl ketones and aldehydes using iodine impregnated alumina under microwave activation. This new protocol has been applied to a variety of substituted aryl carbonyls with excellent yield of substituted 1,3-diphenylpropenones.     

Microwave assisted synthesis of 10b-aza-10c-borapyrene

The synthesis of 10b-aza-10c-borapyrene, an analog of the polycyclic aromatic hydrocarbon pyrene with an internal boron–nitrogen bond, has been improved. We have dramatically reduced the reaction times and ease of workup for the synthesis of this molecule by using a microwave reactor and carefully controlling reaction conditions.     

Microwave assisted synthesis of ring junction heterocyclic antioxidants

A series of 6,7-dihydro-[1,2,4]triazolo[5,1-b]quinazolin-8(5H)-ones, 4a–o were synthesized via a one-pot, multicomponent reaction in the presence of water as a solvent under microwave irradiation using ceric ammonium nitrate as an oxidizing agent. This techno-chemical method provides a rapid construction of higher molecules in short duration with high yield. The adopted method was carried out in the presence of water without catalyst and yielded the compounds without any side products, and thus further purification of compounds by column chromatography was not required. All the synthesized compounds, 4a–o were screened for their 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity. All the compounds, 4a–o possessed moderate antioxidant activity when compared to their standard antioxidant (ascorbic acid).     

Indium doped zinc oxide nanopowders for transparent conducting coatings on glass substrates

Crystalline indium doped zinc oxide (IZO) nanopowders were synthesized using hydrothermal treatment processing. Increasing the doping ratio of indium in the zinc oxide significantly influences the phase structure and shape of the nanopowders resulting in nanorod to nanoparticulate morphologies. As the doping profile increases, the crystallite size decreases, the band gap energy blue shifts and the specific surface area increases (measured by BET method). Additionally Raman spectroscopy exhibited shifts of several peaks, as well as revealed new peaks, confirming the substitution of indium ions within the zinc oxide lattice sites. An IZO suspension made of IZO nanoparticles (In/Zn = 3 atm.%) with a zeta potential greater than 30 mV at pH = 6 was successfully spin-coated on glass substrates for to make transparent conductive coatings evincing sheet resistances as low as 35 kΩ_□ (ρ = 4.9 × 10^?3 Ω m,) with transmission in the visible range as high as 90 %.     

Deposition of thin mesoporous silica films on glass substrates from basic solution

Transparent thin (ca. 100 nm) films of silica-surfactant mesostructured materials were deposited on borosilicate glass plates and soda-lime glass tubes from aqueous solutions containing tetraethoxysilane, alkyltrimethylammonium chloride, ammonia, and methanol. By calcination in air, the films became mesoporous (BET surface area of 700-900 m2 g-1) with pore diameter 2.0-2.8 nm.     

Electrodeposition and characterization of PbSe films on indium tin oxide glass substrates

Electrodeposition of lead selenide (PbSe) thin films on indium tin oxide (ITO) covered glass is described. While disodium salt of ethylenediaminetetraaceticacid was used to complex the lead ions, well crystallized, nearly stoichiometric and mirror-like PbSe films were deposited on ITO glass in potentiostatic mode using aqueous acidic electrolyte containing Pb and Se precursors at different bath temperature. The improvement of crystallinity of the PbSe films deposited at different temperature was studied using X-ray diffraction and Raman scattering. The morphology and composition of the films were characterized by scanning electron microscopy and energy disperse analysis by X-ray, respectively. The optical property of the film was studied by optical measurement techniques.     

Hydrangea-like ZnO nanospheres on Al substrates via hydrothermal synthesis for photocatalytic activity

Hydrangea-like ZnO nanospheres were fabricated on Al substrates via a facile hydrothermal method with only one step. Scanning electron microscopy, energy-dispersive spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and photoluminescence were used to investigate their morphology, component, structure, and optical properties. The hierarchical nanospheres are fabricated by 2D nanosheets with the shape of 3D sphere. By adjusting the reaction time, the formation process was monitored. The photocatalytic activity of ZnO nanospheres was also investigated for their dye degradation, and they exhibit good photocatalytic ability to congo red, with the degradation rate of 98.4%. Besides, they have universal catalysis effect on methyl orange.