A theory of cosmic rays

We present a theory of non-solar cosmic rays (CRs) in which the bulk of their observed flux is due to a single type of CR source at all energies. The total luminosity of the Galaxy, the broken power-law spectra with their observed slopes, the position of the ‘knee(s)’ and ‘ankle’, and the CR composition and its variation with energy are all predicted in terms of very simple and completely ‘standard’ physics. The source of CRs is extremely ‘economical’: it has only one parameter to be fitted to the ensemble of all of the mentioned data. All other inputs are ‘priors’, that is, theoretical or observational items of information independent of the properties of the source of CRs, and chosen to lie in their pre-established ranges. The theory is part of a ‘unified view of high-energy astrophysics’ — based on the ‘Cannonball’ model of the relativistic ejecta of accreting black holes and neutron stars. The model has been extremely successful in predicting all the novel properties of Gamma Ray Bursts recently observed with the help of the Swift satellite. If correct, this model is only lacking a satisfactory theoretical understanding of the ‘cannon’ that emits the cannonballs in catastrophic processes of accretion.     

Multidimensional magnesium oxide nanostructures with cone-shaped branching

Branching structures in nanometer level are of great importance in developing nanoscale science and functional electrical devices. In this letter, multidimensional magnesium oxide structures with cone-shaped branching have been mass-produced using a simple chemical vapor deposition method. The dominant structures in the product include two-dimensional ‘+’, ‘T’, or ‘Γ’ assemblies, and three-dimensional complex configurations. The results presented here enrich the nanoscale community with new basic materials for the fabrication of functional electrical and chemical sensing devices.     

Switching an electrical current with atoms: the reproducible operation of a multi-atom relay

The demonstration of a multi-atom quantum point contact relay is reported, which can be reversibly switched between a quantized conducting ‘on-state’ and an insulating ‘off-state’ by applying an electrochemical control potential to a separate, third electrode, the control or gate electrode. The transition occurs directly from the conducting ‘on-state’ at 5 G₀ (G₀=2e²/h being the conductance quantum) to the insulating ‘off-state’. No stable intermediate levels are observed during the switching process, indicating a reproducible bistable reconfiguration of one single multi-atom contact rather than a deposition and dissolution of different parallel contacts. The results at the same time demonstrate the feasibility and reproducible operation of a configurable electronic device based on a multi-atom contact, which exhibits the functionality of an atomic relay or a transistor, opening intriguing perspectives for electronics and logics on the atomic scale.     

A nanoindentation analysis of the influence of lattice mismatch on some wide band gap semiconductor films

Nanoindentation studies are carried out on epitaxial ZnO and GaN thin films on (0 0 0 1) sapphire and silicon substrates, respectively. A single discontinuity (‘pop-in’) in the load-indentation depth curve is observed for ZnO and GaN films at a specific depths of 13-16 and 23-26 nm, respectively. The physical mechanism responsible for the ‘pop-in’ event in these epitaxial films may be due to the interaction behavior of the indenter tip with the pre-existing threading dislocations present in the films during mechanical deformation. It is observed that the ‘pop-in’ depth is dependent on lattice mismatch of the epitaxial thin film with the substrate, the higher the lattice mismatch the shallower the critical ‘pop-in’ depth.     

Estimation of the absorption coefficients of the surfaces of classrooms

Measurements of early-decay time and multivariable linear-regression techniques were used to estimate the 125-8000-Hz octave-band absorption coefficients of eight types of surfaces in university classrooms. The eight types were ‘hard surfaces’, ‘paneled surfaces’ (including hard seats and windows), ‘glued-on acoustical tiles’, ‘suspended acoustical ceilings’, ‘carpeted surfaces’, ‘upholstered seats’, ‘porous absorbers’ and ‘Helmholtz-resonator absorbers’. In general, resulting estimates were statistically significant, physically realistic and in good agreement with previous results. Values for suspended acoustical ceilings were significantly lower than published data.     

Rapid exothermic synthesis of chalcopyrite-type CuInSe2

Chalcopyrite-type CuInSe₂ (CIS) was synthesized from Cu, In and Se powders by a mechanochemical process (MCP) without any additional heating. When the transparent reactor bottle was strongly shaken, the elemental powders underwent an explosive reaction. The reaction generated a large amount of heat accompanied by simultaneous strong light emission. The product was confirmed to be chalcopyrite-type CIS by X-ray powder diffraction analysis. From the results, we categorized that preparation of CIS by MCP is a form of ‘self-propagating high-temperature synthesis’ (SHS) or ‘gasless combustion synthesis’. In ordinary SHS, a reaction is initiated from a sample surface by a heat flux such as a heated wire, electric spark, or laser beam. On the other hand, in the present reaction system (Cu+In+2Se), was naturally ignited only by mechanical stimulation. Following initiation by an external stimulus, the reaction was self continuing via the exothermic heat generated. The reaction mechanism of the preparation of CIS by the MCP is discussed on the basis of present reaction observations and thermochemical data.     

Charge dynamics effects in conductance through a large semi-open quantum dot

Fano lineshapes in resonant transmission in a quantum dot imply interference between localized and extended states. The influence of the charge accumulated at the localized levels, which screens the external gate voltage acting on the conduction channel is investigated. The modified Fano q parameter and the resonant conduction is derived starting from a microscopic Hamiltonian. The latest experiments on ‘charge sensing’ and ‘Coulomb modified Fano sensing’ compare well with the results of the present model.     

Two-dimensional ‘hat-scratch’ periodic structures induced by a single femtosecond laser pulse on silica glass

Two-dimensional ‘hat-scratch’ structures are fabricated on silica glass by the interference of three non-coplanar beams originating from a single femtosecond laser pulse. The scanning electron microscope (SEM) characterizations show that the as-formed structures are composed of hat holes and scratch marks. The experimental results indicate that the structures are dependent on the intensity of laser beam. The formation of the two-dimensional ‘hat-scratch’ structures is mainly due to the combined laser ablation effects including ionization, shock wave, plasma expansion, and phase explosion.     

A way for enhancing second harmonic generation in one-dimensional nonlinear photonic crystals

We investigate one-dimensional nonlinear photonic crystals consisting of ferroelectric domains with the modulated polarization directions. Significant enhancement of second harmonic generation (SHG) is observed from numerical simulations when the frequency of fundamental wave is aimed at the photonic band edge. We devise the model structure with optimal configuration of the polarization directions of the ferroelectric domains in terms of simulated annealing algorithm. The conversion efficiencies of the ‘forward’ and ‘backward’ SHGs can be engineered.     

The Rayleigh-Plesset equation in terms of volume with explicit shear losses

The most common nonlinear equation of motion for the damped pulsation of a spherical gas bubble in an infinite body of liquid is the Rayleigh-Plesset equation, expressed in terms of the dependency of the bubble radius on the conditions pertaining in the gas and liquid (the so-called ‘radius frame’). However over the past few decades several important analyses have been based on a heuristically derived small-amplitude expansion of the Rayleigh-Plesset equation which considers the bubble volume, instead of the radius, as the parameter of interest, and for which the dissipation term is not derived from first principles. So common is the use of this equation in some fields that the inherent differences between it and the ‘radius frame’ Rayleigh-Plesset equation are not emphasised, and it is important in comparing the results of the two equations to understand that they differ both in terms of damping, and in the extent to which they neglect higher order terms. This paper highlights these differences. Furthermore, it derives a ‘volume frame’ version of the Rayleigh-Plesset equation which contains exactly the same basic physics for dissipation, and retains terms to the same high order, as does the ‘radius frame’ Rayleigh-Plesset equation. Use of this equation will allow like-with-like comparisons between predictions in the two frames.     

Large-scale data analysis using the Wigner function

Large-scale data are analysed using the Wigner function. It is shown that the ‘frequency variable’ provides important information, which is lost with other techniques. The method is applied to ‘sentiment analysis’ in data from social networks and also to financial data.     

Observation of coexistence of 1D and 2D nanostructures in cobalt dipyrromethene trimer complexes adsorbed on a graphite surface

We report the direct observation of 1D and 2D nanostructures of cobalt dipyrromethene trimer complexes adsorbed on a highly oriented pyrolytic graphite surface using scanning tunneling microscopy (STM). STM images showed two types of ordered structures coexisting on the surface: long 1D molecular chains isolated on the terraces, and 2D hexagonal patterns confined by a 1D chain and/or a graphite step edge. These 1D and 2D structures are attributed to ‘edge-on’ and ‘face-on’ complex alignments on the surface, respectively. In both configurations, substrate-mediated molecule-molecule interactions may play a significant role in stabilizing the nanostructures.     

The a.c. susceptibility third harmonic component of NdO1−0.14F0.14FeAs: A flux dynamic magnetic analysis

In this contribution we present the analysis of the third harmonic susceptibility data of the new superconductor NdFeAs_1−0.14F_0.14. ‘Cole-Cole’ polar plots respect to the magnetic frequency of the exciting field are presented and discussed. Data show that NdFeAs_1−0.14F_0.14 exhibit a ‘bulk pinning’ with a 3D flux dynamic character. A comparison of the responses of high T_c materials and an evaluation of theoretical critical states is also presented.     

Electron spectroscopy and density-functional study of ‘ferric wheel’ molecules

The Li-centered ‘ferric wheel’ molecules with six oxo-bridged iron atoms form molecular crystals. We probed their electronic structure by X-ray photoelectron and soft X-ray emission spectroscopy, having calculated in parallel the electronic structure of a single ‘ferric wheel’ molecule from first-principles by tools of the density-functional theory, using, specifically, the Siesta method. The Fe local moments were found to be 4μ_B, irrespective of their mutual orientation. Neighbouring atoms, primarily oxygen, exhibit a noticeable magnetic polarization, yielding effective spin S=5/2 per iron atom, that can get inverted as a ‘rigid’ one in magnetic transitions. Corresponding energy preferences can be mapped onto the Heisenberg model with effective exchange parameter J of about −80 K.     

Quantum dots as scatterers in electronic transport: interference and correlations

Conductance through a system consisting of a wire with side-attached quantum dots is calculated. Such geometry of the device allows to study the coexistence of quantum interference, electron correlations and their influence on conductance. We underline the differences between ‘classical’ Fano resonance in which the resonant channel is of single-particle nature and ‘many-body’ Fano resonance with the resonant channel formed by Kondo effect. The influence of electron-electron interactions on the Fano resonance shape is also analyzed.     

Topological and morphological transformations of developing singular paraxial vector light fields

The paper is devoted to establishment of the real-time topological and morphological dynamics of generic developing paraxial elliptic speckle fields generated and driven by the system ‘laser beam + photorefractive crystal LiNbO₃:Fe’. Generic space-time development of full gamut of polarization ellipse parameters (ellipticity, azimuth, morphology of C points, optical diabolos and handedness) and their combination in fixed beam cross-section was measured in details by the elaborated quick-action real-time Stokes-polarimetry. Whole field irreversible evolution is fulfilled through totality of random space/time C point pair nucleation/annihilation. The ‘life-story’ of C point and optical diabolo pairs is realized through ‘local topological/morphological transition’ with fully reversible scenario. It starts from smooth fragment of speckle field by formation of pre-nucleation local structure and finishes by after-annihilation local structure which decays to another smooth structure. Scenarios of star-monstar pair nucleation/annihilation and monstar  ↔  lemon transformation were established. Measured statistics of C point and diabolo morphological forms was in excellent agreement with theory predictions. All allowed scenarios of diabolo pair ‘life-story’ started/finished as star-hyperbolic monstar-hyperbolic pair were measured. Evolution of polarization ellipses handedness is implemented through L contours movement and reconnection with a saddle as the catalyst. Reconnection of L contour peninsula leads to birth of closed L contour delimiting island of fixed handedness ellipses with/without C points. Elaborated approach and presented results start the dynamic singular optics of time-dependent vector light fields.     

High resolution quantitative SIMS analysis of shallow boron implants in silicon using a bevel and image approach

Secondary ion mass spectrometry (SIMS) is frequently used as the preferred tool for dopant profiling due to its sensitivity and depth resolution. However, as dopant profiles become shallower most, if not all of the implant profile lies in the pre-equilibrium or transient region of an SIMS depth profile. In this region sputter yield and ionisation rate vary making accurate quantification of the implant profile very difficult. These problems can be reduced through the use of much lower beam energies or oxygen flooding of the sample. However, most SIMS instruments do not have these capabilities. In this paper an alternative technique for producing an accurate depth profile of a shallow implant, using existing SIMS technology is presented.Through the fabrication of bevels with very small slope angles on a shallow boron implanted silicon via a chemical etch, SIMS ion imaging is performed on the exposed surface. Ion image data is then summed, and in conjunction with accurate measurement of the bevel morphology, a shallow boron implant profile produced. The ‘bevel-image’ profile compares very well with a profile obtained using a 1 keV oxygen beam. To ensure a good dynamic range on the ‘bevel-image’ profile it is important to clean the bevel with a HF etch, prior to imaging.     

Ion-acoustic shock waves with negative ions in presence of dust particulates

Dust acoustics shock waves have been investigated experimentally in a homogeneous unmagnetized dusty plasma device containing negative ions. When the negative ion density larger than a critical concentration ‘rc’ negative shock waves were observed instead of positive shock waves. Again when it is nearly equal to ‘rc’ both positive and negative shock waves propagate. The experimental findings are compared with modified KdV-Burgers equation. The velocity of the shock waves are also measured and compared with the numerical integration of modified KdV-Burgers equation.     

Towards a novel simulation approach for the transport of atomic states through polarized photons

A novel approach for transferring logic states from one quantum node to other is proposed. Logic states ‘0’ and ‘1’ are represented by two subspaces of the hyperfine states space of rubidium atom (⁸⁷Rb). The atom, placed at the center of a two-mode cavity, is excited by simultaneous application of two laser beams, one for each subspace. Based on the logic state of the atom, it makes a transition to a higher energy level within the corresponding subspace. When the atom relaxes back to a lower state within the subspace, a left- or right-circularly polarized photon is emitted depending on whether the initial state was logic ‘0’ or logic ‘1’. The polarized photon leaks out of the cavity, reaches the receive node and gets detected therein. Simulation results show the efficacy of the approach.