两亲性嵌段共聚物的合成及其在离子液体中的自组装行为

采用阴离子开环聚合法合成了两亲性嵌段共聚物PLA-PEG-PLA.用FT-IR,1H NMR和GPC等手段对嵌段共聚物的结构组成进行了表征.两亲性嵌段共聚物在离子液体1-丁基-3-甲基咪唑六氟磷酸盐中能自组装成胶束,用透射电子显微镜观察了聚合物在离子液体中形成胶束的纳米结构.当疏水链长固定时,胶束的自组装形状主要依赖于亲水链的长度.两亲性共聚物在离子液体中可自组装成可控制结构的纳米胶束,这种纳米结构胶束在很多领域具有广泛的应用前景.     

Amphiphilic linear-dendritic triblock copolymers composed of poly(amidoamine) and poly(propylene oxide) and their micellar-phase and encapsulation properties

A novel amphiphilic ABA dendritic-linear-dendritic block copolymer consisting of poly(amidoamine) and poly(propylene oxide) has been synthesized. The solution-phase behavior of the block copolymer was studied as a function of the generation of the dendritic block, ionic strength, and solution pH. The triblock self-assembles in aqueous media to form stable micelles with CMC values ranging from 10(-6) to 10(-5) M. Dynamic light scattering results indicate the formation of particles ranging from 9 to 18 nm in diameter, with smaller diameters exhibited at higher generations. Additional experiments were performed to assess the feasibility of the nanoparticles for drug delivery applications. Drug loading studies were performed with a model hydrophobic drug, triclosan, resulting in high loading efficiencies ranging from 79 to 86%w/w. The dendritic-linear-dendritic block copolymer synthesized was found to be a promising candidate for drug delivery due to its relative stability in aqueous solution and its drug encapsulation and release properties.     

Poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)-g-poly(vinylpyrrolidone): association behavior in aqueous solution and interaction with anionic surfactants

In this work, we aimed to study the association and interaction behavior of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) block copolymers grafted with poly(vinylpyrrolidone). Critical micellization concentrations were determined using fluorescent probes (pyrene) and critical micellization temperatures characterizing temperature-dependent transitions from monomers to multimolecular micelles were measured. The thermal responsiveness of the copolymer is not affected by the grafting. The hydrodynamic radius of the graft copolymer micelles is found to be greater than that of the original copolymer micelles. The graft copolymer is found to form anisotropic aggregates. The structure of the graft copolymer micelles is less disrupted by the anionic surfactant sodium dodecyl sulfate, compared to the ungraft copolymer.     

Polymer micelles as building blocks for the incorporation of azobenzene: enhancing the photochromic properties in layer-by-layer films

We described the use of block copolymer micelles as building blocks for the incorporation of water-insoluble photochromic species of azobenzene and the fabrication of multilayer films by alternating the deposition of the block copolymer micelles of poly(styrene-b-acrylic acid), incorporating azobenzene and poly(diallyl-dimethylammonium chloride). The azobenzene incorporated into the block copolymer micelles can undergo a reversible photoisomerization under the irradiation of UV and visible light sources. An interesting finding is that the photoisomerization of the azobenzene in the multilayer film is faster than it is in its normal solid film, but very similar to that in its diluted solution. Furthermore, the amount of azobenzene incorporated into the micelles can influence the photoisomerization rates in the films. Therefore, we expect that the block copolymer micelles may provide a proper microenvironment for the photoisomerization of azobenzene and the as-prepared polyelectrolyte/block copolymer micelle thin films will be useful for photoswitching materials.     

基于“分子胶”的新型两亲性嵌段共聚物β-CD-PLA的合成及其胶束化

以二重氢键为引导,二硫键连接疏水性聚乳酸(PLA)和亲水性β-环糊精(β-CD)合成了嵌段共聚物β-CD-PLA。采用1 H-NMR和GPC对嵌段共聚物β-CD-PLA的结构进行了表征,以芘作为荧光分子探针对嵌段共聚物β-CD-PLA自组装胶束的性质进行了表征,采用动态光散射纳米粒度仪(DLS)对自组装胶束的粒径进行了测试。结果表明:在二重氢键的引导作用力和碘的氧化作用下,中间体脱去保护基形成双二硫键,形成目标嵌段共聚物β-CD-PLA,该嵌段共聚物能够在水中自组装形成纳米胶束,临界胶束浓度(CMC)为0.089mg/mL,在稀溶液中具有良好的稳定性,自组装形成空白胶束的粒径为31nm,阿霉素盐酸盐(DOX)载药胶束的粒径为42nm。     

Effect of ionic surfactants on the hydration behavior of triblock copolymer micelles: a solvation dynamics study of coumarin 153

Dynamic fluorescence Stokes shift measurements of coumarin 153 (C153) have been carried out to study the influence of ionic surfactants (sodium dodecyl sulfate, SDS and hexadecyltrimethylammonium chloride, CTAC) on the hydration behavior of aqueous poly(ethylene oxide)(20)-poly(propylene oxide)(70)-poly(ethylene oxide)20 (P123) block copolymer micelles. Increase in SDS or CTAC concentration at a fixed P123 concentration induces the steady-state emission spectra of C153 to shift gradually toward lower energy. This is attributed to an increase in polarity (due to enhanced hydration) experienced by the probe as a consequence of incorporation of ionic head groups in the Corona region. The observed dynamic fluorescence Stokes shift value decreases more in mixed micellar systems than in pure copolymer micelles and the trends are quite similar in the presence of SDS and CTAC. The spectral shift correlation functions were observed to be nonexponential in nature. Critical analysis of the spectral shift correlation function indicates a fast solvation component (<0.2 ns) in P123 micelles, which was absent in the presence of ionic surfactants. Due to increased hydration in the presence of ionic surfactants, the initial fast solvation event was elusive in mixed copolymer-surfactant systems, reflecting the absence of faster solvation component and reduced observed Stokes shift in mixed systems. It has been argued that in the low surfactant concentration region, increase in hydration with the incorporation of ionic head groups in the Corona region is mainly due to increase in mechanically trapped water content. However, at higher surfactant concentrations, bound water content dominates and leads to slower solvation dynamics. The present results also indicate that though CTAC alters the Corona hydration more efficiently than SDS, the overall influence of ionic surfactants on the Corona hydration is grossly similar irrespective of the cationic or anionic nature of the surfactants. Interaction of SDS and CTAC with poly(ethylene oxide)(100)-poly(propylene oxide)(70)-poly(ethylene oxide)(100) (F127) block copolymer micelles has also been studied to comprehend the effect of copolymer composition. The overall trends in dynamic fluorescence Stokes shift and solvation times are similar in both the copolymer micelles.     

Block copolymer micelles as matrixes for incorporating diselenide compounds: a model system for a water-soluble glutathione peroxidase mimic fine-tuned by ionic strength

We report on the use of block copolymer micelles of polystyrene-b-poly(acrylic acid) (PS-b-PAA) as matrixes for incorporating dibenzyl diselenide. We found that the water-insoluble diselenide, after being incorporated into the micelles, demonstrates glutathione peroxidase (GPx) activity in water. Surprisingly, the mimicking system can be adjusted to show higher GPx activity by increasing the ionic strength of the solution simply upon addition of NaCl. Moreover, dibenzyl diselenide incorporated into the micelles is quite stable and maintains its GPx activity even after exposure to the atmosphere.     

Conventional synthesis of amphiphilic block copolymer utilized for polymeric micelle by mechanochemical solid-state polymerization

The first example is presented here of an amiphiphilic block copolymer synthesized by mechanochemical solid-state polymerization and used to form polymeric micelles. A model amphiphilic block copolymer was synthesized first, possessing galactose as a hydrophilic side chain and theophylline as a hydrophobic side chain, by mechanochemical solid-state polymerization. The resulting copolymer had a narrow molecular weight distribution. Polymeric micelle formation was subsequently carried out with the copolymer by a dialysis method. To gain insight into the physicochemical properties of the polymeric micelle, dynamic light scattering (DLS) measurements were performed. A narrow distribution of diameters was observed in the polymeric micelle solution, and these micelles were disrupted by the addition of sodium dodecyl sulfate (SDS). It was also confirmed by DLS measurements that the polymeric micelles were spherical. These results suggested that the block copolymer synthesized by mechanochemical solid-state polymerization was as suitable for the preparation of polymeric micelles as materials obtained by living polymerization.     

Structure and interactions of charged triblock copolymers studied by small-angle X-ray scattering: dependence on temperature and charge screening

A series of thermo-responsive cationic triblock copolymers composed of methoxy-poly(ethylene glycol) (MPEG, hydrophilic), poly(N-isopropylacrylamide) (PNIPAAM, temperature sensitive), and poly((3-acrylamidopropyl) trimethyl ammonium chloride) (PN(+), cationic) has been investigated as a function of temperature and ionic strength. In the MPEG-b-PNIPAAM-b-PN(+) copolymers, the MPEG block length is constant, and the lengths of the PNIPAAM and PN(+) blocks are varied. The solubility of the PNIPAAM block decreases with increasing temperature, and the triblock copolymer thus provides the possibilities of studying micelles with both neutral and charged blocks in the micelle corona as well as the interplay between these two blocks as the electrostatic interactions are varied by addition of salt. Investigation of the systems by densitometry and small-angle X-ray scattering (SAXS) in a temperature range from 20 to 70 °C gave detailed information on the behavior both below and above the critical micelle temperature (CMT). A clear effect of the addition of salt is observed in both the apparent partial specific volume, obtained from the densitometry measurements, and the SAXS data. Below the CMT, the single polymers can be described as Gaussian chains, for which the repulsive interchain interactions, originating from the charged PN(+) block, have to be taken into account in salt-free aqueous solution. Increasing the salt concentration of the solution to 30 mM NaCl leads to an increase in the apparent partial specific volume, and the electrostatic repulsive interchain interactions between the single polymers vanish. Raising the temperature results in micelle formation, except for the copolymer with only 20 NIPAAM units. The SAXS data show that the polymer with the medium PNIPAAM block length forms spherical micelles, whereas the polymer with the longest PNIPAAM block forms cylindrical micelles. Increasing the temperature further above the CMT results in an increase in the micellar aggregation number for both of the polymers forming spherical and cylindrical micelles. The addition of salt to the solution also influences the aggregates formed above the CMT. Overall, the micelles formed in the salt solution have a smaller cross-section radius than those in aqueous solution without added salt.     

Noncovalent triblock copolymers based on a coiled-coil peptide motif

The formation of a noncovalent triblock copolymer based on a coiled-coil peptide motif is demonstrated in solution. A specific peptide pair (E and K) able to assemble into heterocoiled coils was chosen as the middle block of the polymer and conjugated to poly(ethylene glycol) (PEG) and polystyrene (PS) as the outer blocks. Mixing equimolar amounts of the polymer-peptide block copolymers PS-E and K-PEG resulted in the formation of coiled-coil complexes between the peptides and subsequently in the formation of the amphiphilic triblock copolymer PS-E/K-PEG. Aqueous self-assembly of the separate peptides (E and K), the block copolymers (PS-E and K-PEG), and equimolar mixtures thereof was studied by circular dichroism, dynamic light scattering, and cryogenic transmission electron microscopy. It was found that the noncovalent PS-E/K-PEG copolymer assembled into rodlike micelles, while in all other cases, spherical micelles were observed. Temperature-dependent studies revealed the reversible nature of the coiled-coil complex and the influence of this on the morphology of the aggregate. A possible mechanism for these transitions based on the interfacial free energy and the free energy of the hydrophobic blocks is discussed. The self-assembly of the polymer-peptide conjugates is compared to that of polystyrene-b-poly(ethylene glycol), emphasizing the importance of the coiled-coil peptide block in determining micellar structure and dynamic behavior.     

Supramolecular self-assembly of multiblock copolymers in aqueous solution

A unique pH-dependent phase behavior from a copolymer micellar solution to a collapsed hydrogel with micelles ordered in a hexagonal phase was observed. Small-angle neutron scattering (SANS) was used to follow the pH-dependent structural evolution of micelles formed in a solution of a pentablock copolymer consisting of poly((diethylaminoethyl methacrylate)-b-(ethylene oxide)-b-(propylene oxide)-b-(ethylene oxide)-b-(diethylaminoethyl methacrylate)) (PDEAEM25-b-PEO100-b-PPO65-b-PEO100-b-PDEAEM25). Between pH 3.0 and pH 7.4, we observed the presence of charged spherical micelles. Increasing the pH of the micelle solution above pH 7.4 resulted in increasing the size of the micelles due to the increasing hydrophobicity of the PDEAEM blocks above their pKa of 7.6. The increase in size of the spherical micelles resulted in a transition to a cylindrical micelle morphology in the pH range 8.1-10.5, and at pH >11, the copolymer solution undergoes macroscopic phase separation. Indeed, the phase separated copolymer sediments and coalesces into a hydrogel structure that consists of 25-35 wt % water. Small-angle X-ray scattering (SAXS) clearly indicated that the hydrogel has a hexagonal ordered phase. Interestingly, the process is reversible, as lowering of the pH below 7.0 leads to rapid dissolution of the solid into homogeneous solution. We believe that the hexagonal structure in the hydrogel is a result of the organization of the cylindrical micelles due to the increased hydrophobic interactions between the micelles at 70 degrees C and pH 11. Thus we have developed a pH-/temperature-dependent, reversible hierarchically self-assembling block copolymer system with structures spanning nano- to microscale dimensions.     

Synthesis and characterization of shell cross-linked micelles with hydroxy-functional coronas: a pragmatic alternative to dendrimers?

Shell cross-linked (SCL) micelles with hydroxy-functional coronas have been constructed in aqueous solution by exploiting the micellar self-assembly behavior of a new thermoresponsive ABC triblock copolymer. This copolymer was prepared via atom transfer radical polymerization in a convenient one-pot synthesis and comprised a thermoresponsive core-forming poly(propylene oxide) (PPO) block, a cross-linkable central poly(2-(dimethylamino)ethyl methacrylate) (DMA) block, and a hydroxy-functional outer block based on poly(glycerol monomethacrylate) (GMA). DMF GPC analysis confirmed a unimodal molecular weight distribution for the PPO-PDMA-PGMA triblock copolymer precursor, with an M(n) of 12 100 and a polydispersity of approximately 1.26. This copolymer dissolved molecularly in aqueous solution at 5 degrees C but formed micelles with hydroxy-functional coronas above a critical micelle temperature of around 12 degrees C, which corresponded closely to the cloud point of the PPO macroinitiator. Cross-linking of the DMA residues using 1,2-bis(2-iodoethoxy)ethane produced SCL micelles that remained intact at 5 degrees C, i.e., below the cloud point of the core-forming PPO block. Dynamic light scattering studies confirmed that the SCL micelle diameter could be varied depending on the temperature employed for cross-linking: smaller, more compact SCL micelles were formed at higher temperatures, as expected. Since cross-linking involved quaternization of the DMA residues, the SCL micelles acquired cationic surface charge as judged by aqueous electrophoresis studies. These cationic SCL micelles were adsorbed onto near-monodisperse anionic silica sols, which were used as a model colloidal substrate. Thermogravimetric analyses indicated a SCL micelle mass loading of 2.5-4.4%, depending on the silica sol diameter and the initial micelle concentration. Aqueous electrophoresis measurements confirmed that surface charge reversal occurred after adsorption of the SCL micelles, and scanning electron microscopy studies revealed a uniform coating of SCL micelles on the silica particles.     

A concise review of dynamical processes in polymorphic environments of a block copolymer: Rotational diffusion and photoisomerization

This article describes our ongoing efforts to understand dynamical processes such as rotational diffusion and photoisomerization in polymorphic environments of a block copolymer. The objective is to explore how the typical properties of a block copolymer solution such as critical micelle temperature (CMT) and temperature-induced sol-gel transition influence the rotational diffusion of hydrophobic solute molecules. Rotational diffusion of solute molecules differs significantly below and above the CMT of a block copolymer solution, while there is no influence of sol-gel transition on solute rotation. This is rationalized on the basis of the site of solubilization of the solute molecules which is the palisade layer of the micelles in both phases and unaffected by gelation. A similar result has been obtained in case of photoisomerization studies carried out with a carbocyanine derivative in the sol and gel phases of the block copolymer. The isomerization studies have been extended to the reverse phases (sol and gel phases) of the block copolymer to explore the nature of the water present in the cores of the reverse micelles. Our results provide evidence for the existence of water droplets with properties resembling bulk water. In essence, we show that despite having vastly differing bulk properties, both the solution and gel phases (normal as well as reverse) offer identical microscopic environment.     

聚氧乙烯-聚氧丙烯嵌段共聚物加溶作用的研究

本文对聚氧乙烯-聚氧丙烯嵌段共聚物Pluronic的加溶性质和机制进行了研究. 结果表明仅有合适的HLB值的样品才具有加溶作用. L64的水溶液对芳烃有加溶作用, 对烷烃几乎没有. 随温度升高,发生加溶作用的L64最小浓度下降. 此外, 水也能被加溶在L64的二甲苯溶液中. 加溶有水的反胶团的大小比加溶有二甲苯的正胶团要大得多. 紫外光谱与核磁共振谱的研究表明, 对于PPO-PEO嵌段共聚物, 被加溶的二甲苯插在胶团内部的PPO链段之间。     

Adsorption characteristics of zwitterionic diblock copolymers at the silica/aqueous solution interface

The adsorption of a zwitterionic diblock copolymer, poly(2-(diethylamino)ethyl methacrylate)-block-poly(methacrylic acid) (PDEA59-PMAA50), at the silica/aqueous solution interface has been characterised as a function of pH. In acidic solution, this copolymer forms core-shell micelles with the neutral PMAA chains being located in the hydrophobic cores and the protonated PDEA chains forming the cationic micelle coronas. In alkaline solution, the copolymer forms the analogous inverted micelles with anionic PMAA coronas and hydrophobic PDEA cores. The morphology of the adsorbed layer was observed in situ using soft-contact atomic force microscopy (AFM): this technique suggests the formation of a thin adsorbed layer at pH 4 due to the adsorption of individual copolymer chains (unimers) rather than micelle aggregates. This is supported by the remarkably low dissipation values and the relatively low degrees of hydration for the adsorbed layers, as estimated using a combination of quartz crystal microbalance with dissipation monitoring (QCM-D) and optical reflectometry (OR). In alkaline solution, analysis of the adsorption data suggests a conformation for the adsorbed copolymers where one block projects normal to the solid/liquid interface; this layer consists of a hydrophobic PDEA anchor block adsorbed on the silica surface and an anionic PMAA buoy block extending into the solution phase. Tapping mode AFM studies were also carried out on the silica surfaces after removal from the copolymer solutions and subsequent drying. Interestingly, in these cases micelle-like surface aggregates were observed from both acidic and alkaline solutions. The lateral dimension of the aggregates seen is consistent with the corresponding hydrodynamic diameter of the copolymer micelles in bulk solution. The combination of the in situ and ex situ AFM data provides evidence that, for this copolymer, micelle aggregates are only seen in the ex situ dry state as a result of the substrate withdrawal and drying process. It remains unclear whether these aggregates are caused by micelle deposition at the surface during the substrate withdrawal from the solution or as a result of unimer rearrangements at the drying front as the liquid recedes from the surface.     

Non-surface activity and micellization of ionic amphiphilic diblock copolymers in water. Hydrophobic chain length dependence and salt effect on surface activity and the critical micelle concentration

We reported previously (Macromolecules 2003, 36, 5321; Langmuir, 2004, 20, 7412) that amphiphilic diblock copolymers having polyelectrolytes as a hydrophilic segment show almost no surface activity but form micelles in water. In this study, to further investigate this curious and novel phenomenon in surface and interface science, we synthesized another water-soluble ionic amphiphilic diblock copolymer poly(hydrogenated isoprene)-b-sodium poly(styrenesulfonate) PIp-h2-b-PSSNa by living anionic polymerization. Several diblock copolymers with different hydrophobic chain lengths were synthesized and the adsorption behavior at the air/water interface was investigated using surface tension measurement and X-ray reflectivity. A dye-solubilization experiment was carried out to detect the micelle formation. We found that the polymers used in this study also formed micelles above a certain polymer concentration (cmc) without adsorption at the air-water interface under a no-salt condition. Hence, we further confirmed that this phenomenon is universal for amphiphilic ionic block copolymer although it is hard to believe from current surface and interface science. For polymers with long hydrophobic chains (more than three times in length to hydrophilic chain), and at a high salt concentration, a slight adsorption of polymer was observed at the air-water interface. Long hydrophobic chain polymers showed behavior "normal" for low molecular weight ionic surfactants with increasing salt concentration. Hence, the origin of this curious phenomenon might be the macroionic nature of the hydrophilic part. Dynamic light scattering analysis revealed that the hydrodynamic radius of the block copolymer micelle was not largely affected by the addition of salt. The hydrophobic chain length-cmc relationship was found to be unusual; some kind of transition point was found. Furthermore, very interestingly, the cmc of the block copolymer did not decrease with the increase in salt concentration, which is in clear contrast to the fact that cmc of usual ionic small surfactants decreases with increasing salt concentration (Corrin-Harkins law). These behaviors are thought to be the special, but universal, characteristics of ionic amphiphilic diblock copolymers, and the key factor is thought to be a balance between the repulsive force from the water surface by the image charge effect and the hydrophobic adsorption.     

两亲嵌段共聚物胶束用作医用材料

两亲嵌段共聚物可以在水溶液中自组装形成亲水性链段为外壳、疏水性链段为内核的胶束,这种胶束能够用作药物载体而引起人们极大的关注。本文综述了两亲嵌段共聚物胶束用作医用材料的研究进展,主要内容包括医用两亲嵌段共聚物的种类,胶束化,以及用作诊断试剂载体、药物缓释载体、靶向载体等。两亲嵌段共聚物胶束用作磁共振造影剂载体有利于肿瘤的诊断,用作药物缓释载体可以有效增溶难溶性抗肿瘤药物,延长药物在体内的血液循环时间。此外,通过对胶束表面进行修饰或者施加外场,还可以实现靶向功能。因此,两亲嵌段共聚物胶束在医用材料领域有着广阔的发展前景。     

Evolution of multicompartment micelles to mixed corona micelles using solvent mixtures

Miktoarm star triblock copolymers mu-[poly(ethylethylene)][poly(ethylene oxide)][poly(perfluoropropylene oxide)] self-assemble in dilute aqueous solution to give multicompartment micelles with the cores consisting of discrete poly(ethylethylene) and poly(perfluoropropylene oxide) domains. Tetrahydrofuran is a selective solvent for both the poly(ethylethylene) and poly(ethylene oxide) blocks, and thus in tetrahydrofuran mixed corona micelles are favored with poly(perfluoropropylene oxide) cores. The introduction of tetrahydrofuran into water induces an evolution from multicompartment micelles to mixed corona [poly(ethylethylene) + poly(ethylene oxide)] micelles, as verified by dynamic light scattering and nuclear magnetic resonance spectroscopy. A mixed solvent containing 60 wt % tetrahydrofuran corresponds to the transition point, as verified by analysis of a poly(ethylethylene)-poly(ethylene oxide) diblock copolymer in the same solvent mixtures. Furthermore, cryogenic transmission electron microscopy suggests that, as the poly(ethylethylene) block transitions from the core to the corona, the micelle morphologies evolve from disks to oblate ellipsoid micelles (with some vesicles), with worms and spheres evident at intermediate compositions.     

Shape transformation of poly(butadiene)‐b‐poly(ethyleneoxide) plus DTAB compound micelles in aqueous solutions

The micellar shape of Poly(butadiene)‐b‐poly(ethyleneoxide) (PB‐PEO) plus Dodecyltrimethylammoniumbromide (DTAB) compound micelles was investigated by light scattering, small‐angle X‐ray scattering and small‐angle neutron scattering in dependence of the molar ratio between block copolymer and surfactant. The given block copolymer forms cylindrical micelles in binary aqueous solution, which transform to spherical aggregates upon the addition of a sufficiently high amount of DTAB. It is interesting to note that the micellar shape seems to be a bistable feature, in the sense that it depends not only on the molar ratio of BCP and DTAB but also in a predictable manner on the preparation procedure of the solution.