Intermolecular complexes of nido-C<Subscript>2</Subscript>B<Subscript>3</Subscript>H<Subscript>7</Subscript> with HF and LiH molecules: the theoretical studies,bonding properties and natural bond orbital (NBO) analysis

The changes in stabilization energy upon the formation of intermolecular hydrogen, dihydrogen and lithium bond complexes between C₂B₃H₇, LiH and HF have been investigated using MP2 method with aug-cc-pVDZ basis set. The interaction of HF with nido-C₂B₃H₇ could occur through the formation of B–H^?δ···^+δH–F, C–H^+δ···F^?δ–H and B–C···H–F classical and non-classical hydrogen bonds. The B–C bonds in backbone of the C₂B₃H₇ as electron donor interact with σ* orbital of HF as electron acceptor. Also interaction of LiH with nido-C₂B₃H₇ resulted in B–C···Li–H and B–H···LiH lithium bonds as well as C–H···H–Li dihydrogen bond complexes. In some of these complexes, LiH interacts with B–C bonds. Results are indicating that more stable complexes belong to interaction of HF and LiH with backbone of the nido-C₂B₃H₇. The AIM and NBO methods were used to analyze the intermolecular interactions; also the electron density at the bond critical point and the charge transfer of obtained complexes were studied.     

Electochemical characteristics of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>/Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> battery with conducting polymeric binder

Lithium-ion battery based on LiMn₂O₄/Li₄Ti₅O₁₂ materials was assembled for the first time. The cathode and anode of this battery are prepared with the aqueous combined binder poly-3,4-ethylenedioxythiophene: polystyrene sulfonate/carboxymethylcellulose (without polyvinylidene fluoride). The capacity of the LiMn₂O₄/Li₄Ti₅O₁₂ battery was found to be 75 mA h g^–1 at 0.1 C and 55 mA h g^–1 at 1 C. A 95% capacity was retained after 100 charge-discharge cycles. The batteries demonstrated a high Coulombic efficiency close to 100%. Scanning electron microscopy demonstrated that using the conducting binder poly-3,4-ethylenedioxythiophene: polystyrene sulfonate/carboxymethylcellulose provides formation of dense compact layers of electrode materials with good adhesion to the substrate. The electrode structure remains maintained after 100 charge-discharge cycles.     

High-temperature heat capacity and thermodynamic properties of Pb<Subscript>4</Subscript>V<Subscript>2</Subscript>O<Subscript>9</Subscript> and Pb<Subscript>8</Subscript>V<Subscript>2</Subscript>O<Subscript>13</Subscript>

The molar heat capacity of Pb₄V₂O₉ and Pb₈V₂O₁₃ in the temperature range 350–1000 K was measured by differential scanning calorimetry. It was determined that the plot C_p = f(T) for Pb₈V₂O₁₃ has an extremum within the range 416–516 K, which is due to a phase transition. A correlation was found between the heat capacity and composition of oxides in the PbO–V₂O₅ system. The data obtained allowed one to predict the specific heat capacity value for Pb(VO₃)₂.     

P/RS intergrowth type phases in the Ln<Subscript>2</Subscript>O<Subscript>3</Subscript>–MO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> systems

Regularities of formation of complex aluminates with structure of P/RS intergrowth type phases in the Ln₂O₃–MO–Al₂O₃ systems (Ln = rare-earth element, M = Mg, Ca, Sr, Ba) have been considered. Systematization of the data on formation of complex compounds coexisting with one-layer phases in the Ln₂O₃–MO–Al₂O₃ systems and analysis of geometry criteria of LnMAlO₄ stability is a promising approach to prediction of novel compounds with structure of Ruddlesden–Popper phase.     

Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> phase diagram

Phase relations in the Y₂O₃-Ga₂O₃ system were studied by the anneal-and-quench technique in air within 1000–2300°C, and a phase diagram was plotted. Three compounds were found to form: Y₃GaO₆, Y₄Ga₂O₉, and Y₃Ga₅O₁₂; the temperature and concentration bounds of stability were determined for these compounds. Indexing results for Y₃GaO₆ are given.     

Phase equilibria in the system Li<Subscript>2</Subscript>O-MgO-B<Subscript>2</Subscript>O<Subscript>3</Subscript>

The subsolidus region of the Li₂O-MgO-B₂O₃ system has been studied by X-ray powder diffraction and differential thermal analysis. Isothermal sections at 500–550 and 650–700°C have been designed. The following complex borates have been found to form: at 500–550°C, Li₂MgB₂O₅ and LiMgBO₃ are formed; at 650–700°C, a new phase Li₄MgB₂O₅ is formed along with LiMgBO₃; and at 5500–600°, Li₂MgB₂O₅ is formed.     

Comparison of the Solubility of ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript>, Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> in High Temperature Water

As the solubility is a direct measure of stability, this study compares the solubilities of ZnFe₂O₄, Fe₃O₄ and Fe₂O₃ in high temperature water. Through literature analysis and formula derivation, it is shown that it is reasonable to assume ZnFe₂O₄ and Fe(OH)₃ coexist when ZnFe₂O₄ is dissolved in water. Results indicated that the solubility of ZnFe₂O₄ is much lower than that of Fe₂O₃ or Fe₃O₄. The low solubility of ZnFe₂O₄ indicates that it is more protectively stable as an anticorrosion phase. Moreover, the gap between the solubility of ZnFe₂O₄ and that of Fe₃O₄ or Fe₂O₃ was enlarged with an increase of temperature. This means that ZnFe₂O₄ is more protective at higher temperatures. Further analysis indicated that with the increase of temperature, the solubility of ZnFe₂O₄ changed little while those of Fe₂O₃ or Fe₃O₄ changed a lot. Little change of the solubility of ZnFe₂O₄ with increase of temperature showed that ZnFe₂O₄ is stable. The very low and constant solubility of ZnFe₂O₄ suggests that it is more protective than Fe₂O₃ and Fe₃O₄, especially in water at higher temperature.     

Mechanism and kinetics of formation of La<Subscript>2</Subscript>SrFe<Subscript>2</Subscript>O<Subscript>7</Subscript> and Nb<Subscript>2</Subscript>SrFe<Subscript>2</Subscript>O<Subscript>7</Subscript>

Phase formation processes in the systems Ln₂O₃-SrO-Fe₂O₃ (Ln = La, Nd) in air in the temperature range 1200–1500°C were studied. The synthesis of the complex ferrites La₂SrFe₂O₇ and Nb₂SrFe₂O₇ involves the formation of the intermediate compounds LnFeO₃ and LnSrFeO₄ and occurs by the same mechanism as the synthesis of the corresponding aluminates, but much faster.     

Preparation and adsorption of magnetic Co<Subscript>0.5</Subscript>Ni<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript>-chitosan nanoparticles

In this paper, magnetic chitosan microspheres were prepared by the emulsification cross-linking technique, with glutaraldehyde as the cross-linking agent, liquid paraffin as the dispersant, and the Span-80 as emulsifier. The time of cross-linking and the ratio of Co_0.5Ni_0.5Fe₂O₄/chitosan were investigated. The morphology was studied by different instruments. The adsorption performance was investigated and the effects of initial concentration of methyl orange, the time of cross-linking, and the amount of adsorbent were discussed. It is found that the product has uniform morphology when the ratio of magnetic Co_0.5Ni_0.5Fe₂O₄/chitosan is 1 : 2 and the time of cross-linking is 5 h; At room temperature, magnetic Co_0.5Ni_0.5Fe₂O₄–chitosan has a good adsorption toward methyl orange when the magnetic Co_0.5Ni_0.5Fe₂O₄/chitosan dosage is 20 mg.     

Preparation of ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles by mechanical alloying and annealing for sensitizing C-modified TiO<Subscript>2</Subscript> and acquirement of efficient photocatalyst

ZnFe₂O₄ nanoparticles sensitized by C-modified TiO₂ hybrids (ZnFe₂O₄–TiO₂/C) were successfully prepared by a feasible method. The ZnFe₂O₄ nanoparticles were prepared by mechanical alloying and annealing. The residual organic compounds in the synthetic process of TiO₂ were selected as the carbon source. The as-prepared composites were characterized by X-ray diffraction, Raman spectroscopy, X-ray fluorescence, transmission electron microscopy, X-ray photoelectron spectroscopy, ultraviolet–visible light diffuse reflectance spectroscopy (UV–Vis) and N₂ adsorption–desorption analysis. The photocatalytic activity of the photocatalysts was measured by degradation of methyl orange under ultraviolet (UV) light and simulated solar irradiation, respectively. The results show that the carbon did not enter the TiO₂ lattice but adhered to the surface of TiO₂. The photocatalytic activity of the as-prepared C-modified TiO₂ (TiO₂/C) improved both under UV and simulated solar light irradiation, but the improvement was not dramatic. Introduction of ZnFe₂O₄ into the TiO₂/C could enhance the absorption spectrum range. The ZnFe₂O₄–TiO₂/C hybrids exhibited a higher photocatalytic activity both than that of the pure TiO₂ and TiO₂/C under either UV or simulated solar light irradiation. The complex synergistic effect plays an important role in improving the photocatalytic performance of ZnFe₂O₄–TiO₂/C composites. The optimum photocatalytic performance was obtained from the ZnFe₂O₄(0.8 wt%)–TiO₂/C sample.     

The Role of Y<Subscript>2</Subscript>O<Subscript>3</Subscript> and MgO Additives on the Photoluminescence Properties of Si<Subscript>3</Subscript>N<Subscript>4</Subscript> Nanoparticles

The current research addressed synthesizing and studying photoluminescence studies of β-Si₃N₄ nanoparticles. The effect of MgO and Y₂O₃ as the typical additives on photoluminescence behaviour was evaluated. The β-Si₃N₄ with MgO and Y₂O₃ additive specimens were fabricated by a solid state technique (ball-milled method). The as-prepared products were characterized by X-ray diffraction technique, transmission electron microscopy, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy and Raman analysis. The results showed that after ball-milled process, hexagonal β-Si₃N₄ with MgO or Y₂O₃ as the additives with the size distribution of 45–50 nm was obtained. The optical properties of the as-synthesized product were also investigated by photoluminescence and diffuse reflection spectroscopy. The obtained results confirmed that employing MgO as an additive, in comparison to the Y₂O₃, could enhance emission properties in the synthesized silicon nitride nanoparticles. The obtained results also showed that MgO–Si₃N₄ pair acted as FRET system to enhance the emission intensity of β-Si₃N₄ nanoparticles.     

Facile ultrasonic-assisted preparation of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Ag<Subscript>3</Subscript>VO<Subscript>4</Subscript> nanocomposites as magnetically recoverable visible-light-driven photocatalysts with considerable activity

In this work, a facile ultrasonic-assisted method was applied for preparation of Fe₃O₄/Ag₃VO₄ nanocomposites with different compositions. The as-prepared products were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive analysis of X-rays, UV–Vis diffuse reflectance spectroscopy, Fourier transform infrared spectroscopy, and vibrating sample magnetometery. Photocatalytic degradation of rhodamine B under visible-light irradiation was investigated, and it was found that weight ratio of Fe₃O₄–Ag₃VO₄ has significant influence on the photocatalytic activity and the nanocomposite with 1:4 weight ratio of Fe₃O₄–Ag₃VO₄ has superior activity. In addition, the nanocomposite showed great activities in degradations of methylene blue and fuchsine, which are comparable with activity of the pure Ag₃VO₄. More importantly, this nanocomposite displayed remarkable saturation magnetization, leading to easily and quickly separation of its suspension from treated system by applying a magnetic field.     

Effect of phosphate doping on electric properties and chemical stability of Ba<Subscript>4</Subscript>Ca<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>11</Subscript> protonic conductor

Conductivity of perovskite phosphate–substituted solid solutions of Ba₄Ca₂Nb_{2 –x} P _x O₁₁ (0.0 ≤ x ≤ 0.5) was studied as a function of temperature, partial pressure of oxygen and water vapors. It is proved that the studied systems are protonic conductors at the temperatures below 600°C in the atmosphere with elevated content of water vapors (pH₂O = 1.92 × 10^–2 atm). Introduction of the tetrahedral [PO₄] group in the complex oxide matrix of Ba₄Ca₂Nb₂O₁₁ results in an increase in the oxygen–ionic (dry air, pH₂O = 1.91 × 10^–4 atm) and protonic conductivities (wet air, pH₂O = 1.92 × 10^–2 atm). Is it found that the doping causes a considerable increase in chemical stability of phases with respect to carbon dioxide.     

Hydrogen generation from H<Subscript>2</Subscript>O/H<Subscript>2</Subscript>O<Subscript>2</Subscript>/MnWO<Subscript>4</Subscript> system

Hydrogen gas as a clear energy resource was found to be largely bubbled from a H₂O/H₂O₂/MnWO₄ system. MnWO₄ powder was fabricated by an aqueous reaction method. The powder was characterized with X-ray diffraction (XRD), transmission electron microscope (TEM), and X-ray photoelectron spectrometry (XPS). The efficiency of the hydrogen generation increases with an increase in initial pH in the appropriate range, H₂O₂ proportion, MnWO₄ proportion, and intensity of light resource. Calcining at 400 °C for 1 h can make the MnWO₄ powder synthesized by an aqueous reaction more effective for H₂ generation and more stable in higher initial pH. The MnWO₄ catalyst shows a long-term stability for photocatalytic H₂ generation. A mechanism was suggested for the hydrogen generation from the H₂O/H₂O₂/MnWO₄ system together with XPS analysis.     

Chemistry of the CARBEX process: Identification of absorption bands of the ligands in the electronic spectra of aqueous solutions of Na<Subscript>4</Subscript>[UO<Subscript>2</Subscript>(O<Subscript>2</Subscript>)CO<Subscript>3</Subscript>)<Subscript>2</Subscript>]

On the basis of consideration of dissociation, hydration, association, and ligand exchange, the assignment of absorption bands in the electronic spectra of aqueous solutions of the Na₄[UO₂(O₂)CO₃)₂] complex has been performed. It has been demonstrated that the absorption in the range 190–400 nm is caused by the oxygen atoms of the O₂^2- and CO₃^2- groups and hydration water molecules of dissociated and neutral complex species Na₃[UO₂(O₂)(CO₃)₂]^–, Na₂[UO₂(O₂)(CO₃)₂]^2–, and Na₄[UO₂(O₂)(CO₃)₂].     

Monolithic FeO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts for ammonia oxidation and nitrous oxide decomposition

(1.2–8.3)%FeO_х/Al₂O₃ monolith catalysts have been prepared by impregnating alumina with aqueous solutions of iron(III) nitrate and oxalate and have been tested in NH₃ oxidation and in the selective decomposition of N₂O in mixtures resulting from ammonia oxidation over a Pt–Rh gauze pack under conditions of nitric acid synthesis (800–900°C). In the case of the support calcined at 1200°C, the catalyst is dominated by bulk Fe₂O₃ particles localized on the Al₂O₃ surface. The activity of these samples in both reactions decreases with a decreasing active component content, thus limiting the potential of Fe₂(C₂O₄)₃ · 5H₂O, an environmentally friendlier but poorly soluble compound, as a substitute for Fe(NO₃)₃ · 9H₂O. Decreasing the support calcination temperature to 1000°C or below leads to the formation of a highly defective Fe–Al–O solid solution in the (1.2–2.7)%FeO_х/Al₂O₃ catalysts. The surface layers of the solid solution are enriched with iron ions or stabilize ultrafine FeO_х particles. The catalytic activity of these samples in both reactions is close to the activities measured for ~8%FeO_х/Al₂O₃ samples prepared using iron nitrate.     

Mechanism of the initiation of combustion in CH<Subscript>4</Subscript>(C<Subscript>2</Subscript>H<Subscript>2</Subscript>)/Air/O<Subscript>3</Subscript> mixtures by laser excitation of the O<Subscript>3</Subscript> molecules

The possibility of enhancing the ignition and combustion of the CH₄/air/O₃ and C₂H₂/air/O₃ mixtures by exciting the asymmetric vibrations of the O₃ molecule with CO₂ laser radiation is considered. Even the admixture of small amounts of O₃ (2.5–5.0 vol %) into the hydrocarbon/air mixtures intensifies ignition and shortens the induction period. The excitation of the O₃ molecules with 9.7-μm radiation speeds up the chain process and further reduces the induction period and the ignition temperature. The induction period can be shortened by a factor of 10–100 even at low radiation energies absorbed by the gas (E _S = 10^?3-10^?2 J/cm³).     

Kinetics of Li-ion transfer reaction at LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>, LiCoO<Subscript>2</Subscript>, and LiFePO<Subscript>4</Subscript> cathodes

Kinetics of LiFePO₄, LiMn₂O₄, and LiCoO₂ cathodes operating in 1 M LIPF₆ solution in a mixture of ethylene carbonate and dimethyl carbonate was deduced from impedance spectra taken at different temperatures. The most striking difference of electrochemical impedance spectroscopy (EIS) curves is the impedance magnitude: tens of ohms in the case of LiFePO₄, hundreds of ohms for LiMn₂O₄, and thousands of ohms for LiCoO₂. Charge transfer resistances (R _ct) for lithiation/delitiation processes estimated from the deconvolution procedure were 6.0 Ω (LiFePO₄), 55.4 Ω (LiCoO₂), and 88.5 Ω (LiMn₂O₄), respectively. Exchange current density for all the three tested cathodes was found to be comparable (0.55–1·10^?2 mAcm^?2, T = 298 K). Corresponding activation energies for the charge transfer process, \( {E}_{ct}^{\#} \), differed considerably: 66.3, 48.9, and 17.0 kJmol^?1 for LiMn₂O₄, LiCoO₂, and LiFePO₄, respectively. Consequently, temperature variation may have a substantial influence on exchange current densities (j _o) in the case of LiMn₂O₄ and LiCoO₂ cathodes.     

NH<Subscript>4</Subscript>V<Subscript>3</Subscript>O<Subscript>7</Subscript>: Synthesis,morphology, and optical properties

The effect of the method used for the synthesis of NH₄V₃O₇ on its morphology, textural parameters, and optical properties was studied. Ammonium vanadate NH₄V₃O₇ was prepared by treating NH₄VO₃ in the presence of citric acid under hydrothermal (4.0 ≤ pH ≤ 5.5, T = 180–200°C, 48 h) and microwave–hydrothermal (3.5 ≤ pH ≤ 5.0, T = 180–220°C, 20 min) conditions. Self-assembled NH₄V₃O₇ microcrystals crystallizing in monoclinic system with unit cell parameters a = 12.247(5) Å, b = 3.4233(1) Å, c = 13.899(4) Å, β = 89.72(3)°, and V = 582.3(4) ų (space group P2₁) were shown to be formed independently of the method used to treat the reaction mixture. The morphology of NH₄V₃O₇ particles was shown to depend on рН of the reaction mass and the method of synthesis. The structural features of NH₄V₃O₇ were studied by IR, UV, and Vis spectroscopy, and the optical bandgap was determined.     

Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>/BiFeO<Subscript>3</Subscript> heterostructure: preparation,characterization, and photocatalytic activity

Bi₂O₃/BiFeO₃ composite was successfully fabricated by a conventional sol–gel method and structural properties were characterized based on X-ray diffractometer, scanning electron microscope, transmission electron microscope, energy-dispersive X-ray analyzer, nitrogen adsorption–desorption measurement, and UV–visible diffuse reflectance spectroscopy. Bi₂O₃/BiFeO₃ had a good absorption for visible light, which was benefit to photocatalytic activity. The highest degradation efficiency was obtained when the content of Bi₂O₃ in Bi₂O₃/BiFeO₃ was 63.9%. Effect of experimental conditions was investigated, and the highest photocatalytic activity of Bi₂O₃/BiFeO₃ was observed at photocatalyst dosage of 0.5 g/L, initial BPA concentration of 10 mg/L, and solution pH of 6.3. Bi₂O₃/BiFeO₃ photocatalyst exhibited enhanced photocatalytic activity for BPA, and the reaction rate constant over Bi₂O₃/BiFeO₃ composite was 2.23, 3.65, and 8.71 times higher than that of BiFeO₃, Bi₂O₃ and commercial TiO₂ (P25), respectively. Bi₂O₃/BiFeO₃ showed high photocatalytic activity after three cycles, suggesting that it was a stable photocatalyst. The possible photocatalytic mechanism has been discussed on the basis of the theoretical calculation and the experimental results. The hydroxyl and superoxide radicals together with photogenerated holes played significant roles in the photocatalytic reaction.