The reconstruction of diffractive object digital hologram at a short distance

By using a spherical wave as the reference wave, we recorded the in-line phase-shifting digital hologram of the 25th element of Chinese standard No. 3 resolution test pattern, and gave the corresponding numerical reconstructed results. Some problems concerning with the digital hologram recording and reconstruction of the diffractive object at a short distance are discussed. The experimental result shows that the resolution of the reconstructed image is better than 10μm, which is the limit by using this experimental arrangement.     

球面参考光波数字全息的一些特点分析及实验

对以球面波作为参考光记录数字全息图的采样和再现分离条件进行了详细的分析。推导出了同时满足采样和再现分离条件时,CCD及物体的横向尺寸、物体及参考光源至CCD的距离之间需要满足的关系式,证明了完全散射物体上复振幅在记录面上的叠加可以等效为一个点光源在记录面上产生的效果,进行了相应的实验研究。结果表明：数字全息术中采用球面参考光波可以比采用平面参考光波更容易满足采样和分离条件,并可以记录到更多的物体信息;在物体至CCD的距离固定的情况下,无透镜傅里叶变换全息术是优化的记录光路结构;散射物体比衍射物体的数字全息图更容易满足采样和分离条件。     

预放大数字全息显微系统的特点

为了提高预放大数字全息显微系统的成像质量,采用理论分析与实验验证相结合的方法,分别对采用平面及球面参考光记录的预放大数字全息显微系统进行了研究和比较。结果表明:在通常的实验条件下,系统的横向分辨力主要取决于显微物镜的成像分辨力;记录距离较小时,两种系统的横向分辨力均随着记录距离的增大略有降低;但当记录距离较大时,球面参考光预放大数字全息系统的横向分辨力降低得更为明显,即平面参考光预放大数字全息显微系统较为优越;在记录距离为0的情况下,即像面数字全息成像情况下,两种系统的再现像均具有最高的分辨力,在利用普通工业用传感器条件下,横向分辨力远超过了2.19 m,且像质较好。因此,尽可能减小全息图的记录距离,或者采用像面数字全息系统,可以有效提高数字全息系统的成像分辨力。     

点源参考光数字全息的频谱和记录能力分析

基于最高空间频率分析法,对点源参考光数字全息的空间频谱进行了分析,得出了使空间频谱分离的条件。结合全息成像系统的分辨率,推导出了同时满足采样和再现像分离的记录条件以及CCD对被记录物体的数据记录能力。结果表明,对给定的物体和CCD来说,采用点源参考光比采用平面参考光更容易满足采样和分离的条件,并可以记录到更多的物体信息,从而可使再现像获得更高的分辨率。     

合成孔径数字全息的分析模拟及多参考光合成孔径数字全息

分析了合成孔径数字全息的理论和实现方法,提出了多参考光合成孔径数字全息方法及其应用前景,以双狭缝为例,模拟了单幅及单参考光、多参考光两种合成孔径数字全息术的记录和再现方法,对三种方法再现像的分辨率进行了比较.     

Design of the spatial filter window for digital holographic convolution reconstruction of object beam field

In the convolution reconstruction process of digital holographic object beam field, the object beam fields with different magnifications can be obtained when the reconstructing beams are spherical waves with different wave curvature radii. This paper presents a theoretical and experimental discussion on the useful spatial frequency spectrum of the hologram numerically illuminated by the spherical wave. The result shows that there would be an image in the spatial frequency spectrum of digital hologram, which is completely the same as the object, if the wave surface radius of the spherical wave is equal to the distance from the object to the CCD sensor. Taking this image as a reference and designing a filter, the position of the reconstructed images with different magnifications can be predicted correctly in the reconstructed plane. Additionally, since the spectrum distribution of zero-order diffraction can be forecasted accurately in theory, its contribution can be effectively eliminated through changing the spatial filter shape; then a reconstructed object field containing more high-frequency information can be obtained.     

High-resolution digital transmission microscopy—a Fourier holography approach

A spherical reference field is used to construct a digital holographic system with a demonstrated resolution up to 228 line pairs per mm. The reference field originates from a GRIN lens placed 1 mm from the illuminated object. This allows the use of a standard sensor to record the hologram with the required numerical aperture. The image is determined by evaluation of the Rayleigh–Sommerfeld diffraction integral that relates the object field in the image plane to the object field in the sensor plane. Experimental results are given for two charge coupled device sensors and one complementary metal-oxide-semiconductor active pixel sensor.     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级干扰,提高重建像质量,一种方法利用空间光调制器相移技术在参考光中加入一次任意相移,记录两幅数字全息图,消除重建零级像|另一种方法使用“无干扰全息图”消除重建零级像及共轭像.本文讨论结果可为大物体彩色数字全息及多波长数字全息检测应用提供有益的参考.     

波前重建中的高通滤波消零级衍射干扰研究

根据可变放大率物光波前重建过程中球面波照射下数字全息图频谱的分析,提出在重建波照射前对全息图进行高通滤波消零级衍射干扰的方法.对物体表面为散射及非散射面情况的波前重建进行理论模拟及实验研究.结果表明,当物体表面是散射面时,可以获得有效消除干扰的重建图像,但是,当物体表面是光学平滑表面时,为得到完整的重建图像,要求将更为...     

利用相位模板实现数字全息超分辨成像

为了简化数字全息超分辨记录系统,分别在其物光和参考光部分引入一块相位模板,以获得垂直和倾斜方向照明物体的光束和具有不同载波频率的参考光束.当这些具有不同照射方向的光透过物体后,可以使CCD在位置固定的情况下记录到携带低频和高频信息的物体衍射场,不同载波频率的参考光则保证了高频和低频信息在复合全息图的频谱面上能够相互分离.实验结果证明,通过将记录到的物体高频和低频信息合成,可以获得超出系统衍射极限分辨率的再现像.     

重建彩色数字全息图时不同色光物光场的准确重叠研究

将数字全息检测物体表面视为散射面,球面波为参考波,使用角谱重建算法对不同波长照明情况下物平面光波场重建位置进行研究.结果表明,不考虑图像的物理意义时,衍射的一次傅里叶变换重建像中心与物光场频谱的中心相对应,以一次傅里叶变换重建像为参考,可以较好地确定物光场频谱位置,按照可变放大率的角谱重建算法实现不同色光重建场的准确重叠.     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级...     

数字无透镜傅里叶变换全息术中非傍轴及离焦像差的校正

对数字无透镜傅里叶变换全息图直接采用逆傅里叶变换进行物场的数值重建时.需要满足两个条件:第一,全息图的记录过程必须满足傍轴近似条件,否则再现过程中会产生非傍轴像差;第二,记录全息图时物平面与参考点光源到全息图记录平面的距离必须相等,否则再现过程中会产生离焦像差.理论分析了非傍轴及离焦记录条件下数字无透镜傅里叶变换全息图的灰度分布特点,并提出了相应的非傍轴及离焦像差的数值校正方法.根据实际的非傍轴或离焦记录情况.分别给所记录的数字全息图灰度分布矩阵乘以适当的非傍轴或离焦校正因子,以消除灰度矩阵中非傍轴或离焦因素的影响.然后再对校正后的伞息图灰度矩阵做逆傅里叶变换处理.即可得到准确的数字再现像.实验结果表明.该数值重建方法能够有效地消除无透镜傅里叶变换全息术中数字再现像的非傍轴像差及离焦像差,提高再现像的质量.     

电子全息法三维物场逐层分析

本文叙述了一种三维物场的定量再现、分析方法,其中采用了电子全息法,它包括:1)三维物场全息图的数字记录,2)全息图面上复振幅分布的数字再现,3)三维物场的逐层再现。由此可以获得整个三维物场的信息,这一方法以CCD摄象机作为记录介质,然后把由CCD采集的数字全息图输入计算机,利用频谱滤波法经过傅里叶变换、频谱分离、反傅里叶变换再现出全息图面上的复振幅。在此基础上借助频域衍射公式可再现出任何一层(平行于全息图面)上的图象。这样,我们用这一数字再现和逐层分析的方法便可研究三维物场的一些特性,如物体在其中的位置等。整个再现过程是由计算机软件实现,其中采用了二维快速傅里叶变换算法,再现过程可在几分钟内完成。本文同时还给出了这一数字再现方法的空间分辨率,并且通过计算机模拟展示了一个理想三维物场的再现过程及再现结果。最后指出了这一方法存在的问题及未来的应用前景。     

Eliminate the influence of zero-order diffraction for wavefront reconstruction with selectable magnification in digital holographic

The objective surface is considered as the scattering plane; frequency spectrum of a digital hologram transmission light is studied when the reference light and reconstruction wave are spherical waves. The relation between relevant parameters and the object light, conjugate object light and zero-order diffraction wave frequency spectrum distribution. The research results show that: each frequency spectrum of the diffracted wave broadens to various degrees as the radius of the reconstruction wavefront decreases, and frequency aliasing is generated under certain conditions. Based on the research results, a new method that carries out high-pass filtering processing without zero-order diffraction interference upon digital hologram is proposed and the reconstruction experimental proof for eliminating the interferential changeable magnification wave is given.     

Spatial filtering of the diffractional field of a double-exposure hologram of a focused scatterer image. Part I

Interferometer sensitivity to a transverse or longitudinal displacement is analyzed for the case of diffusively scattering plane surface. It is shown that the sensitivity does not change when an off-axis spherical reference wave is used instead of a flat one at the stage of hologram recording. However, localization of interference fringes in the Fourier plane, where a pupil image of a positive lens is filtered (the lens was used for recording a hologram of a focused scatterer image), is not accompanied by a parallax phenomenon. In addition, in the case of controlling the longitudinal displacement of the scatterer, the interferometer sensitivity threshold is decreased. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 8, pp. 21–30, August, 2007.     

Effect of intensity quantization level in parallel phase-shifting digital holography

Parallel phase-shifting digital holography (PPSDH) enables the instantaneous recording of three-dimensional fields. The three-dimensional field can be reconstructed using a computer by numerical scalar wave propagation. In PPSDH, we record a space-division multiplexed hologram that includes the required phase retardation in the spatial distribution of the reference wave and then interpolate the data at blanked pixels for each phase retardation to obtain the complex amplitude distribution of an object wave. The recorded quality of the multiplexed hologram influences the reconstruction quality. In this study, we investigate the effect of the intensity quantization of a multiplexed hologram on the reconstruction quality. We compare the influence of intensity quantization in PPSDH with that in the conventional phase-shifting method. Random noise is also added to the multiplexed hologram. The required intensity quantization level is helpful for selecting a digital image sensor.     

近距离数字全息术记录和再现问题

讨论了记录距离小于菲涅耳衍射要求的近距离数字全息记录和再现问题。对全息记录与再现中高次相位的补偿问题进行了分析,证明了在CCD的参量和记录距离给定后,只要记录时使物体的大小、球面参考光波的位置和距离满足一定的条件,即使在记录距离小于菲涅耳衍射要求的最小距离情况下,也可将高次相位的影响补偿到足够小,使得近距离数字全息的数字再现仍可用快速傅里叶变换算法计算。推导出了满足高次相位补偿的条件和满足补偿条件时的数值再现计算公式。实验结果与理论分析的结论相吻合,并给出了一种修正实际记录的参考光和计算机模拟的理想参考光之间偏差的方法。     

全息再现的分析

本文讨论了无像差再现像存在的条件及不失真的条件,并具体指出球面参考光形成的菲涅耳全息图可有四个既无像差又不失真的再现像。总结出成像的规律便于人们真实地再现原物。     

Waveguide holograms: A new approach to hologram integration

A new class of holography is proposed, in which (1) the evanescent part of a guided wave, or (2) the guided wave in a thin-film hologram is utilized as the reference wave and/or the illuminating one. The hologram was designated as “wave-guide hologram” and has advantages in the possibility of integration, wide field of view, and compactness and high reliability of the reconstructing system. The possibility of the waveguide hologram has been proved through reconstruction experiments with a guided wave of a waveguide hologram recorded with a plane reference wave.