Isobaric (vapour + liquid) equilibrium for (2-propanol + water + ammonium thiocyanate): Fitting the data by an empirical equation

Isobaric (vapour + liquid) equilibrium (VLE) data for {2-propanol (1) + water (2) + ammonium thiocyanate (3)} were obtained at 101.3 kPa experimentally. An all-glass Fischer-Labodest type still capable of handling pressures from (0.25 to 400) kPa and temperatures up to 523.15 K was used. (Vapour + liquid) equilibrium data of (2-propanol + water) were also obtained at 101.3 kPa experimentally. An equation is proposed to fit the data of salt-containing systems using dimensionless groups called relative ratio. The proposed model was also tested for the salt-containing systems given from the literature.     

Measurement and correlation of (liquid + liquid) equilibrium of the azeotrope (cyclohexane + 2-butanone) with different ionic liquids at T = 298.15 K

Experimental densities, speeds of sound, and refractive indices of the binary mixtures of 2-butanone with cyclohexane and OMIM PF₆ (1-methyl-3-octylimidazolium hexafluorophosphate) were determined from T = (293.15 to 303.15) K, since they are necessary to determine the (liquid + liquid) equilibrium. Excess molar volumes, changes of refractive index on mixing, and deviations in isentropic compressibility for the above systems were calculated. Experimental (liquid + liquid) equilibrium of the ternary mixtures {cyclohexane + 2-butanone + 1-hexyl-3-methylimidazolium hexafluorophosphate (HMIM PF₆)} and (cyclohexane + 2-butanone + OMIM PF₆) were carried out to assess the suitability of HMIM PF₆ and OMIM PF₆ as azeotrope breaker of the mixture cyclohexane and 2-butanone. Selectivity and distribution ratio values, derived from the tie lines data, were presented in order to analyze the best separation solvent in a liquid extraction process. Experimental (liquid + liquid) equilibrium data were compared with the correlated values obtained by means of the NRTL and UNIQUAC models.     

(Liquid + liquid) equilibria of the (water + acetic acid + dibasic esters mixture) system

(Liquid + liquid) equilibrium (LLE) data for the {water + acetic acid + dibasic esters mixture (dimethyl adipate + dimethyl glutarate + dimethyl succinate)} system have been determined experimentally at T = (298.2, 308.2, and 318.2) K. Complete phase diagrams were obtained by determining solubility curve and tie-line data. The reliability of the experimental tie-line data was confirmed by using the Othmer-Tobias correlation. The UNIFAC model was used to predict the phase equilibrium in the system using the interaction parameters determined from experimental data between CH₂, CH₃COO, CH₃, COOH, and H₂O functional groups. Distribution coefficients and separation factors were compared with previous studies.     

Viscosity of ionic liquid mixtures of 1-alkyl-3-methylimidazolium hexafluorophosphate + CO2

The viscosities of the mixtures 1-hexyl-3-methylimidazolium hexafluorophosphate ([HMIM][PF₆]) + CO₂ and 1-octyl-3-methylimidazolium hexafluorophosphate ([OMIM][PF₆]) + CO₂ were measured with a rolling ball viscometer. The CO₂ mole fraction for one mixture ranged up to 0.434 and the other up to 0.447. The viscosities were measured at 293.15-353.15 K and 10-20.0 MPa. The experimental uncertainty in viscosity was estimated to be within ±3.0%. The experimental data were compared with McAllister's three-body model, which correlated with the experimental data within average absolute deviations of 5.9%.     

A study on the liquid–liquid equilibria of 1-alkyl-3-methylimidazolium hexafluorophosphate with ethanol and alkanes

This work demonstrates the ability of the 1-alkyl-3-methylimidazolium hexafluorophosphate to act as an extraction solvent in petrochemical processes for the removal of alkanes from their azeotropic mixture with ethanol. LLE (liquid–liquid equilibrium) of the ternary systems hexane + ethanol + 1-hexyl-3-methylimidazolium hexafluorophosphate (HMIM PF₆) or 1-octyl-3-methylimidazolium hexafluorophosphate (OMIM PF₆) and heptane + ethanol + OMIM PF₆ are carried out at 298.15 K and atmospheric pressure. Experimental liquid–liquid data are correlated by using different equations. The solute distribution ratio and the selectivity, determined from tie-line data, suggest the efficiency of the ILs used as solvents. A comparison with other IL, in terms of solvent capacity, is included. The liquid–liquid extraction process is simulated by using conventional software and the obtained results are shown.     

(Liquid + liquid) equilibria of (water + propionic acid + alcohol) ternary systems

(Liquid + liquid) equilibrium (LLE) data of the solubility (binodal) curves and tie-line end composition were examined for mixtures of {water (1) + propionic acid (2) + octanol or nonanol or decanol or dodecanol (3)} at T = 298.15 K and 101.3 ± 0.7 kPa. The reliability of the experimental tie-line data was confirmed by using the Othmer-Tobias correlation. The LLE data of the ternary systems were predicted by UNIFAC method. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

(Liquid + liquid) equilibria of {heptane + xylene + N-formylmorpholine} ternary system

(Liquid + liquid) equilibrium (LLE) data for ternary system {heptane (1) + m-xylene (2) + N-formylmorpholine (3)} have been determined experimentally at temperatures ranging from 298.15 K to 353.15 K. Complete phase diagrams were obtained by determining solubility and tie-line data. Tie-line compositions were correlated by Othmer-Tobias and Bachman methods. The universal quasichemical activity coefficient (UNIQUAC) and The non-random two liquids equation (NRTL) were used to correlate the phase equilibrium in the system using the interaction parameters determined from experimental data. It is found that UNIQUAC and NRTL used for LLE could provide a good correlation. Distribution coefficients, separation factors, and selectivity were evaluated for the immiscibility region.     

(Vapour + liquid) equilibria of the {pentafluoroethane (HFC-125) + dimethyl ether (DME)} system

Binary (vapour + liquid) equilibrium data were measured for the {pentafluoroethane (HFC-125) + dimethyl ether (DME)} system at temperatures from (313.15 to 363.15) K. These experiments were carried out with a circulating-type apparatus with on-line gas chromatography. The experimental data were correlated well by the Peng-Robinson Stryjek-Vera equation of state using the Wong-Sandler mixing rules.     

Vapor-liquid equilibria of ternary systems with 1-ethyl-3-methylimidazolium ethyl sulfate using headspace gas chromatography

Vapor-liquid equilibria (VLE) for two binary systems 1-propanol + water and methyl acetate + methanol, and the ternary mixtures with the ionic liquid 1-ethyl-3-methylimidazolium ethyl sulfate [EMIM]⁺[EtSO₄]⁻ as entrainer were measured by headspace gas chromatography. From the experimental VLE data, the influence of the ionic liquid on the separation factors was investigated. The experimental results for the ternary systems show that [EMIM]⁺[EtSO₄]⁻ has a great influence on the separation factors of the systems investigated. Furthermore, the experimental separation factors were compared with the predicted ones of other ionic liquids and conventional selective solvents using modified UNIFAC (Dortmund).     

Influence of temperature on the (liquid + liquid) equilibria of {methanol + benzene + hexane} ternary system

In order to show the influence of temperature on the liquid-liquid equilibria (LLE) of {methanol (1) + benzene (2) + hexane (3)} ternary system, equilibrium data at T = (278.15, 283.15, and 293.15) K are reported. The effect of the temperature on liquid-liquid equilibrium is determined and discussed. Ternary system is available from the literature at T = 298 K. All chemicals were quantified by gas chromatography using a thermal conductivity detector. The solubility data for methanol + hexane and the upper critical temperature (UCST) at 308.3 K was reported. The tie line data for the ternary system were satisfactorily correlated by the Othmer and Tobias method, and the plait point coordinates for the three temperatures were estimated. Experimental data for the ternary system are compared with values calculated by the NRTL and UNIQUAC equations, and predicted by means of the UNIFAC group contribution method. It is found that the UNIQUAC and NRTL models provide similar good correlations of the equilibrium data at these three temperatures. Finally, the UNIFAC model predicts an immiscibility region larger than the experimental observed. Distribution coefficients were also analysed through distribution curves.     

Liquid phase equilibria of (water + phosphoric acid + 1-butanol or butyl acetate) ternary systems at T = 308.2 K

(Liquid + liquid) equilibria and tie lines for the ternary systems of (water + phosphoric acid + 1-butanol) and (water + phosphoric acid + butyl acetate) were measured at T = 308.2 K. The experimental ternary (liquid + liquid) equilibrium data were correlated with the UNIQUAC model. The reliability of the experimental tie lines was confirmed using Othmer-Tobias correlation. The average root-mean-square deviation (RMSD) values of (water + phosphoric acid + 1-butanol) and (water + phosphoric acid + butyl acetate) systems were 2.17% and 2.16%, respectively. Distribution coefficients and separation factors were measured to evaluate the extracting capability of the solvents. The results show that butyl acetate may be considered as a reliable organic solvent for the extraction of phosphoric acid from aqueous solutions.     

Phase behavior of the system hyperbranched polyglycerol + methanol + carbon dioxide

Phase equilibrium data have been measured for the ternary system hyperbranched polyglycerol + methanol + carbon dioxide at temperatures of 313–450 K and pressures up to 13.5 MPa. Phase changes were determined according to a synthetic method using the Cailletet setup. At elevated temperatures the system shows a liquid–liquid–vapor region with lower solution temperatures. Besides the vapor–liquid and liquid–liquid equilibria, the vapor–liquid to vapor–liquid–liquid and vapor–liquid–liquid to liquid–liquid phase boundaries are reported at different polymer molar masses and can serve as test sets for thermodynamic models. A distinct influence of the polymer molar mass on the vapor–liquid equilibrium can be noticed and indicates the existence of structural effects due to the polymer branching. Modeling the systems with the PCP-SAFT equation of state confirms these findings.     

Quinary liquid–liquid equilibria for mixtures of nonane + undecane + two pairs of aromatics (benzene/toluene/m-xylene) + sulfolane at 298.15 and 313.15 K

In this work, liquid–liquid equilibrium data were measured for three quinary mixtures (nonane + undecane + benzene + toluene + sulfolane), (nonane + undecane + benzene + m-xylene + sulfolane) and (nonane + undecane + toluene + m-xylene + sulfolane) at 298.15 and 313.15 K and ambient pressure. The experimental LLE data were determined by using a jacketed glass cell with temperature controlled. The quantitative analysis was performed by using a Varian gas chromatograph equipped with a flame ionization detector and a SPB™-1 column. The experimental quinary liquid–liquid equilibrium data have been satisfactorily correlated by using NRTL and UNIFAC-LLE models. The calculated values based on the NRTL model were found to be in a better agreement with the experiment than those based on the UNIFAC-LLE model.     

Experimental (solid + liquid) phase equilibria of (alkan-1-ol + benzonitrile), (amine + benzonitrile) binary mixtures,and (decan-1-ol + decylamine + benzonitrile) ternary mixtures

(Solid + liquid) phase diagrams, SLE have been determined for (octan-1-ol, or nonan-1-ol, or decan-1-ol, or undecan-1-ol + benzonitrile) and for (hexylamine, or octylamine, or decylamine, or 1,3-diaminopropane + benzonitrile) using a cryometric dynamic method at atmospheric pressure. Simple eutectic systems with complete immiscibility in the solid phase and complete miscibility on the liquid phase have been observed. The solubility decreases with an increase of the number of carbon atoms in the alkan-1-ol, or amine chain. The temperature of the eutectic points increases and shifts to lower alkan-1-ol, or amine mole fractions as the alkyl chain length of the alkan-1-ol, or amine increases. The higher intermolecular interaction was observed for the (alkan-1-ol + benzonitrile) systems.     

Phase equilibria of liquid (water + butyric acid + oleyl alcohol) ternary system

(Liquid + liquid) equilibrium (LLE) data for the ternary system of (water + butyric acid + oleyl alcohol) at T = (298.15, 308.15, and 318.15) K are reported. Complete phase diagrams were obtained by determining solubility and the tie-line data. The reliability of the experimental tie lines was confirmed by using Othmer-Tobias correlation. The UNIFAC method was used to predict the phase equilibrium data. The phase diagrams for the ternary mixtures including both the experimental and correlated tie lines are presented. Distribution coefficients and separation factors were evaluated for the immiscibility region. A comparison of the solvent extracting capability was made with respect to distribution coefficients, separation factors, and solvent-free selectivity bases for T = (298.15, 308.15, and 318.15) K. It is concluded that oleyl alcohol may serve as an adequate solvent to extract butyric acid from its dilute aqueous solutions.     

Isothermal vapor–liquid equilibrium at 303.15 K and excess molar volumes at 298.15 K for the ternary system of propyl vinyl ether + 1-propanol + 2,2,4-trimethyl-pentane and its binary sub-systems

Isothermal vapor–liquid equilibrium data determined by the static method at 303.15 K are reported for the binary systems propyl vinyl ether + 1-propanol, 1-propanol + 2,2,4-trimethylpentane and propyl vinyl ether + 2,2,4-trimethylpentane and also for the ternary system propyl vinyl ether + 1-propanol + 2,2,4-trimethyl-pentane. Additionally, new excess volume data are reported for the same systems at 298.15 K. The experimental binary and ternary vapor–liquid equilibrium data were correlated with different G^E models and excess molar volume data were correlated with the Redlich–Kister equation for the binary systems and the Cibulka equation for the ternary system, respectively.     

Vapour pressure and excess Gibbs energy of binary 1,2-dichloroethane + cyclohexanone,chloroform + cyclopentanone and chloroform + cyclohexanone mixtures at temperatures from 298.15 to 318.15 K

The vapour pressures of the binary systems 1,2-dichloroethane + cyclohexanone, chloroform + cyclopentanone and chloroform + cyclohexanone mixtures were measured at temperatures between 298.15 and 318.15 K. The vapour pressures vs. liquid phase composition data for three isotherms have been used to calculate the activity coefficients of the two components and the excess molar Gibbs energies, G^E, for these mixtures, using Barker's method. Redlich–Kister, Wilson, NRTL and UNIQUAC equations, taking into account the vapour phase imperfection in terms of the 2-nd virial coefficient, have represented the G^E values. No significant difference between G^E values obtained with these equations has been observed. Our data on vapour–liquid equilibria (VLE) and excess properties of the studied systems are examined in terms of the DISQUAC and modified UNIFAC (Dortmund) predictive group contributions models.     

(Liquid + liquid) equilibria of the quaternary system methanol + isooctane + cyclohexane + benzene at T = 303.15 K

Tie line data of the ternary system {methanol + isooctane + cyclohexane} were obtained at T = 303.15 K. A quaternary system containing these three compounds and benzene was also studied at the same temperature, while data for {methanol + benzene + cyclohexane} and {methanol + benzene + isooctane} were taken from literature. In order to obtain the binodal surface of the quaternary system, four quaternary sectional planes with several cyclohexane/isooctane ratios were studied. The distribution of benzene between both phases was also analysed. Ternary experimental results were correlated with the UNIQUAC and NRTL equations and compared with predictions using the UNIFAC group contribution method.     

Phase diagram of Na2S2O3 + ethanol + water at ambient pressure and temperature

In the present communication, we report the studies concerning liquid–liquid–solid equilibria for the ternary system sodium thiosulphate (Na₂S₂O₃) + ethanol + water at ambient pressure and at room temperature (303 ± 2 K). The solubility data of Na₂S₂O₃ are reported for solutions in water, ethanol and solutions of varying concentrations of ethanol in water. The phase diagram for the said system is developed, described and compared with similar system K₂CO₃ + methanol + water. These results have been explained in terms of structural properties of aqueous ethanol solutions and further discussed in terms of the effect of ions to cause phase separation.     

Liquid–liquid equilibria for quaternary mixtures of nonane + undecane + (benzene or toluene or m-xylene) + sulfolane at 298.15 and 313.15 K

Liquid–liquid equilibrium (LLE) data were measured for three quaternary systems containing sulfolane, nonane + undecane + benzene + sulfolane, nonane + undecane + toluene + sulfolane and nonane + undecane + m-xylene + sulfolane, at T = 298.15 and 313.15 K and ambient pressure. The experimental quaternary liquid–liquid equilibrium data have been satisfactorily represented by using NRTL and UNIFAC-LLE models for the activity coefficient. The calculated compositions based on the NRTL model were found to in a better agreement with the experiment than those based on the UNIFAC-LLE model.