Factors affecting temperature measurement using phase measurement interferometry in small scale devices

This paper presents full-field temperature measurements of buoyancy opposing mixed convection flow within a miniscale fluidic geometry. The technique used is phase measurement interferometry and a Mach–Zehnder layout is employed. The popular two-dimensional microfluidic geometry of three streams merging at a junction is chosen for this analysis. The apparatus set-up is described and measures taken to limit experimental errors discussed. Also presented, are corresponding flow visualization images for comparison with the interferometric results. The results are compared for similar boundary conditions over the range of Richardson numbers of 0.5–1.7. The results of the interferometric study are presented in the form of full-field temperature maps depicting the type of thermal plume structure present through isotherms and are seen to compare well with the results of the flow visualization study. Some factors affecting the measurement technique at this scale are then discussed. These include the effect of using different transparent materials for sealing the fluidic device and temporal vibrations caused by either varying boundary conditions or by slight pulsations in the flow supplied. Also, due to discrepancies that exist in the literature for the temperature coefficient of the refractive index of the working fluid, thermocouples are embedded in the flow field and used to convert the measured phase change to a corresponding temperature change. The corresponding values of refractive index change with temperature are discussed and compared to published values. Overall, PMI is demonstrated to provide excellent full-field temperature plots that can be used to measure local heat transfer rates from this non-intrusive measurement technique.     

Image reconstruction of three dimensional temperature field from projections in optical tomography

It is well known that determination of temperature fields by holographic interferometry is a successful method in the measurement of thermophysics. In this paper, some practical algorithms for image reconstruction from projections are presented to produce the temperature field. Algorithms being developed include that the Radon transform integral equation is directly solved by a grid method, and that the Radon inversion formula is numerically evaluated by two-dimensional Fourier transform technique. Some examples are given to verify the validity of the above methods in practice. A heat air flow above conbustor with a rectangular hole is investigated by holographic interferometric system, and temperature distributions of two sections in the air flow field have been reconstructed by this methods.     

Three-dimensional shock wave reflection over a corner of two intersecting wedges

This paper presents an experimental and numerical investigation of three-dimensional shock wave reflections over a corner of two wedges intersecting perpendicularly in a shock tube. Experiments were conducted in a diaphragmless shock tube equipped with double-exposure diffuse holographic interferometry in which the time interval between the first and second exposure was set to be . This arrangement clearly visualized complex configurations of three-dimensional shock wave reflections. A numerical study was also carried out for interpreting these holographic interferometric observations by using the Weighted Average Flux (WAF) method to solve the three-dimensional unsteady compressible Euler equations. It was found that along the line of the intersection of these two wedges, two Mach stems intersected each other resulting in the formation of a Mach stem which leaned forward. Received 30 June 1996 / Accepted 6 October 1996     

Walker Bleakney and the development of the shock tube at Princeton

Recollections of activities in the Physics Department of Princeton University leading to the construction and use of the SHOCK TUBE are recorded. Walker Bleakney was the leader of these activities from 1940 to 1979, and his methods and attitude are described. Original interferograms made at Princeton show some results obtained.     

Direct interferometric measurement of streaming birefringence

The two refractive indices in the flow of a colloidal birefringent liquid are measured separately by means of a Mach-Zehnder interferometer. For a quantitative evaluation of the resulting interferograms it is not necessary to linearize the respective equations relating the refractive index distribution to the deformation velocity in the flow. Therefore it becomes possible to perform velocity measurements in the non-Newtonian flow range. An additional measurement of the mean flow rate enables one to determine the velocity field without the need of a calibration of the observed interference fringes.     

Flow behavior around a square cylinder subject to modulation of a planar jet issued from upstream surface

The flow behavior in the up- and downstream regions of a square cylinder subject to the modulation of a planar jet issued from the cylinder׳s front surface was studied using the laser-assisted smoke flow visualization method and hot-wire anemometer measurement. Reynolds numbers were from 1628 to 13 000. The drag force experienced by the square cylinder was obtained by measuring the surface pressures on the up- and downstream faces. The temporally evolving smoke flow patterns in the up- and downstream regions were synchronously revealed through the smoke flow visualization. The frequency characteristics of the instability waves in the up- and downstream regions were synchronously detected by the two hot-wire anemometers. Four characteristic flow modes were observed within the different ranges of the injection ratios. At the low injection ratios (IR<1), the ‘swinging jet’ appeared. The jet swung periodically leftward and rightward and formed a fluid bubble on the front surface. The fluid bubble contained a pair of counter-rotating vortices and presented a periodic variation in its height. At moderately low injection ratios (1<IR<4.3), the ‘deflected oscillating jet’ appeared. The jet was deflected in either the left or the right direction and wrapped around one of the edges of the square cylinder. Both the swinging and oscillating motions of the jet in the swinging jet and deflected oscillating jet modes were induced by the periodic feedback pressure signals generated by the vortex shedding in the wake. At the moderately high (4.3<IR<8.3) and high (IR>8.3) injection ratios, the ‘deflection jet’ and ‘penetrating jet’ appeared. The jet detached from the cylinder׳s front surface and penetrated a long distance into the upstream region due to large jet momentum. Neither periodic jet oscillation in the upstream region nor vortex shedding in the wake was observed. The drag coefficient was found to be decreasing quickly with increasing the injection ratio.     

A technique utilizing chemical reagents for direct measurement of temperature at a local area and its engineering applications

Temperature is one of the physical quantifies through which quantitative evaluation of the safety and reliability of industrial products can be achieved, and this has been used widely in practice. Under any environmental condifion, regardless of the size of the object to be inspected, accurate and reliable measurement of temperature is of great practical importance. This review article presents a simple and direct method of temperature measurement, that can be applied to the local areas with difficulty in measuring the temperature by using normal thermometers. In the present article, two different application examples are demonstrated. One addresses the study of the electromigration of solders which are used as bonding metals in electronic devices （micro-structures）. The application of the method to the shaft of a motor used in heavy industrial fields is explained as the second.     

基于遗传算法的混凝土三维非稳态温度场反分析

大体积混凝土结构施工期间的合理温度控制问题非常重要,而精确进行温度计算所需的一些材料参数往往不易直接测得,需要根据一些易测得的量进行反求。本文基于三维瞬态温度场有限元求解理论与反问题理论,建立了混凝土三维瞬态温度场反问题求解数值模型。运用遗传算法寻求非线性反演问题全局最优解,只需要若干点温度实测值便可实现混凝土多个热学参数如绝热温升、导温、导热系数及热交换系鼓等的同时反演,算例对本文反演方法的反演精度及数值稳定性给出了满意的证明。     

Aerodynamic characteristics of a square cylinder with a rod in a staggered arrangement

The aerodynamic characteristics of a square cylinder with an upstream rod in a staggered arrangement were examined. The pressure measurement was conducted in a wind tunnel at a Reynolds number of Re_D=82,000 (based on the width of the square cylinder) and the flow visualization was carried out in a water tunnel with the hydrogen bubble technique at Re_D=5,200. When the rod and the square cylinder were in tandem, the reduction of drag was mainly caused by the increase of the rear suction pressure. When the staggered angle was introduced, the shield and disturbance effect of the rod on the square cylinder diminished, which results in the increase of the cylinder drag. The side force induced by the staggered angle is small (the maximum value is 20% of the drag of the isolate square cylinder). There were six different flow modes with various staggered angles and spacing ratios, and the corresponding flow patterns are presented in present paper.     

Turbulent flow of quadrangle mode in interdisk midplane between two shrouded co-rotating disks

Particle image velocimetry (PIV) was employed to study the flow patterns, time-averaged velocity field, and turbulence properties of the flow in the interdisk midplane between two shrouded co-rotating disks at the interdisk spacing to disk radius ratio S = 0.1 and rotating Reynolds number Re = 2.25 × 10⁵. A quadrangle core flow structure rotating at a frequency 75% of the disks’ rotating frequency was observed. The flow in the region outside the quadrangle core flow structure consisted of four cellular flow structures. Five characteristic flow regions—the hub-influenced region, solid-body rotation region, buffer region, vortex region, and shroud-influenced region—were identified in the flow field. Circumferential and radial turbulence intensities, Reynolds stresses, turbulence kinetic energy, correlation coefficients, as well as the Lagrangian integral time and length scales of turbulent fluctuations were analyzed and presented. Features of the turbulence properties were found to be closely related to the rotation motion of the inner and outer characteristic flow structures. The circumferential components of the turbulence properties exhibited local minima in the buffer region and maxima in the solid-body rotation and vortex regions, while the radial components of the turbulence intensity, turbulent normal stress, and Lagrangian integral turbulence time scale exhibited maximum values in the buffer region and relatively low values in the regions near the hub and the shroud.     

Experimental study on the direct contact condensation of the steam jet in subcooled water flow in a rectangular channel: Flow patterns and flow field

Direct contact condensation (DCC) of steam jet in subcooled water flow in a channel was experimentally studied. The main inlet parameters, including steam mass flux, water mass flux and water temperature were tested in the ranges of 200–600 kg/(m² s), 7–18 × 10³ kg/(m² s), 288–333 K, respectively. Two unstable flow patterns and two stable flow patterns were observed via visualization window by a high speed camera. The flow patterns were determined by steam mass flux, water mass flux and water temperature, and the relationship between flow patterns and flow field parameters was discussed. The results indicated that whether pressure or temperature distributions on the bottom wall of channel could represent different flow patterns. And the position of pressure peak on the bottom wall could almost represent the condensation length. The upper wall pressure distributions were mainly dependent on steam and water mass flux; and the upper wall temperature distributions were affected by the three main inlet parameters. Moreover, the bottom wall pressure and temperature distributions of different unstable flow patterns had similar characteristics while those of stable flow patterns were affected by shock and expansion waves. The underlying cause of transition between different flow patterns under different inlet parameters was reflected and discussed based on pressure distributions.     

Noncontact measurement of internal temperature distribution in a solid material using ultrasonic computed tomography

Numerical simulations and experiments have been carried out for a noncontact measurement of the internal temperature distribution in a solid material using ultrasonic computed tomography (CT). The method is based on the fact that the sound propagation velocity in a material depends on its temperature as well as its density and structure. From the numerical simulations, the convolution method is found to be an effective algorithm for the reconstruction of the sound velocity distribution. To obtain an accurate temperature distribution, it is found to be necessary to measure the sound propagation time with a resolution of 1 ns. In the experiments, the temperature distributions are measured in an agar-gel cylinder of 40 mm in diameter, along the center axis of which a platinum wire with 0.1 mm in diameter is located. By comparing the experimental results with the theoretical ones, the temperature distribution inside the agar-gel can be reconstructed with an error of 0.1 K, except for the region close to the platinum heater wire where temperature gradient is high. Further, the effects of an obstacle to the sound propagation, such as an acrylic resin cylinder inside the agar-gel, are investigated. Although the obstacles causes a part of projection to be missed, by using a linear-interpolation method to compensate for the incomplete projection, the temperature distribution can be reconstructed well but with a little larger error of 0.2 K, except for the regions close to the platinum heater wire and obstacle.     

层合圆柱三维温度场分析的半解析-精细积分法

针对圆柱体的三维温度场分析,提出了一种高效的半解析-精细积分法。将温度场展开为环向坐标的Fourier级数,并对径向坐标进行差分离散,从而把三维热传导方程简化为一系列二阶常微分方程;将这些二阶常微分方程转化为哈密顿体系下的一阶状态方程,并利用两点边值问题的精细积分法求解。由于该方法仅对径向坐标进行差分离散,故相对于传统的数值方法离散规模大幅度减少,不仅提高了计算效率、降低了存贮量,而且缓解了代数方程的病态问题。此外,针对Fourier半解析解,根据热平衡原理推导出了两种材料衔接面的半解析差分方程,从而为求解复合材料层合柱问题打下了基础。算例结果表明,即使对于细长比高达400的圆柱杆件,此方法仍然可以给出精度较高的解答。     

Estimation of radiative properties and temperature distributions in coal-fired boiler furnaces by a portable image processing system

This paper presented an experimental investigation on the estimation of radiative properties and temperature distributions in a 670 t/h coal-fired boiler furnace by a portable imaging processing system. The portable system has been calibrated by a blackbody furnace. Flame temperatures and emissivities were measured by the portable system and equivalent blackbody temperatures were deduced. Comparing the equivalent blackbody temperatures measured by the portable system and the infrared pyrometer, the relative difference is less than 4%. The reconstructed pseudo-instantaneous 2-D temperature distributions in two cross-sections can disclose the combustion status inside the furnace. The measured radiative properties of particles in the furnace proved there is significant scattering in coal-fired boiler furnaces and it can provide useful information for the calculation of radiative heat transfer and numerical simulation of combustion in coal-fired boiler furnaces. The preliminary experimental results show this technology will be helpful for the combustion diagnosis in coal-fired boiler furnaces.     

Experimental study of the temperature field generated during orthogonal machining of an aluminum alloy

During the machining of metals, plastic deformation and friction lead to the generation of heat in the workpiece, which results in thermomechanically coupled deformation. Recently, several numerical models of this highly coupled process have been produced in response to increased interest in high speed machining. It is important to characterize the thermal field in the cutting zone in order to completely verify these models of high speed machining and to direct further advancement in this area. In this work, HgCdTe infrared detectors are used to experimentally measure the temperature distribution at the surface of a workpiece during orthogonal cutting. From these temperature measurements, the heat generated in the primary shear zone and the friction zone can be examined and characterized. A modified Hopkinson bar technique has been developed to perform orthogonal machining at speeds ranging from 10 to 100 m/s. In the present work, a cutting velocity of 15 m/s is employed in all the tests in order to demonstrate the capability of the apparatus and characterize thermal fields during low speed machining. Temperature fields are obtained during the orthogonal cutting of aluminum as a function of depth of cut. It is seen that depth of cut can vary both the maximum temperature as well as the distribution of the temperature field in the aluminum workpiece. the maximum temperature increased with depth of cut (238°C for 1.5 mm cut, 207°C for 1.0 mm cut and 138°C for 0.5 mm cut) and the temperature field extended further beneath the cut surface with decreasing depth of cut.     

The calculation of the density field from axisymmetric schlieren interferograms by the image processing techniques

The schlieren interferograms used to be analyzed in a qualitative way. In this paper, by means of the powerful computational ability and the large memory of computer; the image processing method is investigated for the digitalization of an axisymmetric schlieren interferogram and the determination of the density field. This method includes the 2-D low-pass filtering, the thinning of interferometric fringes, the extraction of physical information and the numerical integration of the density field. The image processing results show that the accuracy of the quantitative analysis of the schlieren interferogram can be improved and a lot of time can be saved in dealing with optical experimental results. Therefore, the algorithm used here is useful and efficient.     

Development of a new temperature measuring system for gas–liquid flow in spraying field

Based on previous work, a new temperature measuring system for gas–liquid flow, composed of shielded and unshielded thermocouples, on-line laser detection device for liquid droplets, vacuum pump and wavelet analysis data processor, is developed in this work. The necessity of vacuum pump and the criterion of mesh size selection are also described. Through an application of measuring temperature in saturator, it shows that the system can evaluate the separation of gas–liquid two-phase flow and measure the liquid droplet temperature and the gas temperature effectively in counter-current spraying field.     

Limited-view optical tomography technique and its application to temperature field measurement in flow of hot air

In this paper, a limited-view optical tomography technique is presented, which contains an orthographic holography system, an image processing system and the simultaneous algebraic reconstruction technique (SART). Using this technique, the temperature field of a cross section in the flow of hot air from a nozzle is measured. The measured results are satisfactory. The project supported by the National Natural Science Foundation and the State Science and Technology Commission of China     

Rollup region of a turbulent trailing vortex issued from a blade with flow separation

This paper presents the results of an experimental investigation on the near field of a tip vortex generated by a blade at moderate incidence. The experiments were conducted at Re=15 000 and the boundary layer over the blade separated around midchord on the upper surface. Laser-Doppler measurements of the turbulent flow (Tu=1.5%) were performed at various stations downstream of the blade. The three components of the mean velocity field and turbulent attributes were quantified at cross-planes, characterizing both the blade wake and the tip vortex structure. This allowed the analysis of the rollup and initial stages of decay of the tip vortex in the light of known theories and models. The axial velocity defect at the center of the vortex core evolved as x⁻¹ log x, without displaying any significant outgrowth imposed by the separated flow upstream. Momentum balances were also carried out at a station downstream to the conclusion of vortex rollup. The approximate axisymmetry of the flow field in the trailing vortex was used to formulate the balances in a cylindrical coordinate system. Among other observations, it was seen that an adverse axial pressure gradient developed in the vortex core, which reinforced the tenacity of the axial velocity defect. In contrast, an area influenced by a favorable pressure gradient was found outside the core.     

The experimental investigation of heat transport and water infiltration in granular packed bed due to supplied hot water from the top: Influence of supplied water flux, particle sizes and supplied water temperature

In the present study an experimental investigation of heat transport and water infiltration in granular packed bed (unsaturated porous media) due to supplied water flux is carried out. The study is focus on the one-dimensional flow in a vertical granular packed bed column assuming local thermal equilibrium between water and particles at any specific space. This experimental study described the dynamics of heat transport and water infiltration in various testing condition. Experimentally, the influences of particle sizes, supplied water flux and supplied water temperature on heat transport and water infiltration during unsaturated flow are clarified in details. The results showed that the granular packed bed with larger particle size results in faster infiltration rate and form a wider infiltration depth. Furthermore, the increase of the supplied water flux and supplied water temperature corresponds to faster infiltration rate, but the results not linearly related to the interference between the heat transport and hydrodynamics characteristics in granular packed bed.