Diffusion of Noble Metals,Zn and Ge in GaSb Single Crystals

Diffusion of Cu, Ag, Au, Ge and Zn in single crystal gallium antimonide has been carried out by measuring Hall effect according to van der Pauw, conductivity, energy dispersive X-ray (EDX) and surface electron microscopy. The best results have been obtained in excess of antimony. The resulting diffusion data in GaSb are diffusivity D_o, activation enthalpy Q, carrier density p and mobility μ at 300 K: Ag: D_o=1.8·10⁻⁴ cm² s⁻¹, Q=1.2 eV, p=6·10¹⁸ cm⁻³, μ=550 cm² (Vs)⁻¹ Au: D_o=6.6·10⁺³ cm² s⁻¹, Q=2.7 eV, p=5·10¹⁸ cm⁻³, μ=500 cm² (Vs)⁻¹ Cu: D_o=3.2·10⁺⁸ cm² s⁻¹, Q=2.7 eV, p=2·10¹⁸ cm⁻³, μ=150 cm² (Vs)⁻¹ Zn: D_o=9.2·10⁻² cm² s⁻¹, Q=1.8 eV, p=2·10²⁰ cm⁻³, μ=80 cm² (Vs)⁻¹ Ge: D_o=1.0·10⁻¹ cm² s⁻¹, Q=1.7 eV, p=1·10¹⁹ cm⁻³, μ=320 cm² (Vs)⁻¹. This revised version was published online in August 2006 with corrections to the Cover Date.     

Stainless steel capillary columns for high temperature gas chromatography

A layer of elemental silicon has been deposited on the surface of stainless steel tubing by means of chemical vapor deposition (CVD). Two kinds of capillary column were prepared from the deactivated tubing: cross-linked, silanol-terminated polydime-thylsiloxane wall coated open tubular (WCOT) columns and molecular sieve 13X porous layer open tubular (PLOT) columns. Unlike fused silica capillary columns, stainless steel WCOT and PLOT columns can be operated at temperatures in excess of 400°C. High temperature simulated distillation has been performed successfully with a macro bore WCOT column and rapid PNA (paraffin, naphthene, and aromatic) analysis with a multidimensional gas solid chromatographic (GSC) system using PLOT columns.     

Direct thermal desorption of semivolatile organic compounds from diffusion denuders and gas chromatographic analysis for trace concentration measurement

A novel method for collection and analysis of vapor-phase semivolatile organic compounds (SOCs) in ambient air is presented. The method utilizes thermal desorption of SOCs trapped in diffusion denuders coupled with cryogenic preconcentration on Tenax-TA and analysis by high resolution gas chromatography (GC)-electron-capture detection (ECD). The sampling and analysis methods employ custom-fabricated multicapillary diffusion denuders, a hot gas spike (HGS) apparatus to load known quantities of thermally stable standards into diffusion denuders prior to sample collection, a custom-fabricated oven to thermally desorb SOCs from the diffusion denuder, and a programmable temperature vaporization (PTV) inlet containing a liner packed with Tenax-TA for effective preconcentration of the analytes and water management. High flow rates into the PTV inlet of 750mLmin(-1)during thermal desorption are ca. a factor of ten greater than typically used. To improve resolution and retention time stability, the thermal desorption and PTV inlet programming procedure includes three steps to prevent water from entering the analytic column while effectively transferring the analytes into the GC system. The instrumentation and procedures provide virtually complete and consistent transfer of analytes collected from ambient air into the GC evidenced by recovery of seven replicates of four internal standards of 90.7+/-4.0-120+/-23% (mean+/-95% confidence interval, CI). Retention time based compound identification is facilitated by low retention time variability with an average 95% CI of 0.024min for sixteen replicates of eight standards. Procedure details and performance metrics as well as ambient sampling results are presented.     

Thermal degradation observed with different injection techniques: Quantitative estimation by the use of thermolabile carbamate pesticides

An experiment has been designed to study the thermal degradation of thermolabile compounds caused by various injection techniques. The four carbamate pesticides aminocarb, bendiocarb, carbaryl, and dioxacarb decompose thermally into methylisocyanate and the corresponding phenol. The carbamets and the phenols arising from them were separated on a 25 m SE-54 fused silica column; all compounds exhibited sharp peak shape indicating that the degradation observed took place completely within the injector. When cold on-column injection was employed no thermal degradation was observed whereas with hot splitless injection at 220°C decomposition of the carbamates was almost complete. PTV injection was found to produce intermediate results. When packed with glass wool and operated with glass wool and operated with starting temperatures lower than the boiling point of the solvent, decomposition was found to be almost complete. Applying isothermal conditions at 140°C (30°C above the boiling point of toluene) aminocarb and bendiocarb underwent only slight decomposition while carbaryl and dioxacarb were about half degraded. Results from PTV injection with an empty insert resembled those obtained using cold on-column injection and in this mode the application of temperatures up to 200°C resulted in no visible degradation. This can be explained by the short residence time of the sample in the injector.     

New liquid nitrogen cryogenic modulator for comprehensive two-dimensional gas chromatography

A new liquid nitrogen (LN2) jet-based thermal modulator for performing comprehensive two-dimensional (2D) gas chromatographic (GC x GC) separations has been designed and constructed. Temperature measurements of the trapping zone, a segment of uncoated fused silica capillary, show that it can be cooled to -196 degrees C in about 300 ms. A film of liquid nitrogen develops on the outside of the trapping capillary even when the oven temperature is in excess of 200 degrees C. Compounds as volatile as propane can be trapped by the modulator and held for periods of at least 1 min without breakthrough. The peak widths for n-alkanes are on the order of 80 ms at half height after passing through an 80cm second dimension column. Repeated analysis of gasoline demonstrated excellent run-to-run reproducibility of the system.     

Peak shape improvement of basic analytes in capillary liquid chromatography

The analysis of bases is of special interest in pharmaceutical research because numerous active substances contain basic functional groups. Capillary and conventional size LC separations of drug substances spiked with potential impurities were compared. In the case of the nonpolar drug levonorgestrel equal separation efficiency was readily attained by both techniques. The peaks of basic substances, however, showed extensive tailing when separated by capillary LC. The peak deformation was attributable to interactions of the basic substances with the polar inner surface of the fused silica capillaries employed in capillary LC and does not appear with the steel tubing generally used in conventional size LC. This drawback of capillary LC was overcome by use of deactivated fused silica capillaries for column hardware and transfer lines.     

Possibilities and limitations of fast GC with narrow-bore columns

In this work, two narrow-bore capillary columns with different internal diameters (I.D.) 0.15 mm (15 m length, 0.15 microm film thickness) and 0.10 mm (10 m length, 0.10 microm film thickness) with the same stationary phase (5% diphenyl 95% dimethylsiloxane), phase ratio and separation power were compared with regard to their advantages, practical limitations and applicability in fast GC on commercially available instrumentation. The column comparison concerns fast GC method development, speed and separation efficiency, the sample transfer into the column utilizing split and splitless inlet, sample capacity, detection (analysing compounds of a wide range of polarities and volatilities--even n-alkanes C16-C28 and selected pesticides) and ruggedness (in the field of ultratrace analysis of pesticide residues in real matrix). Under conditions corresponding to speed/separation efficiency trade-off 0.10 mm I.D. versus 0.15 mm I.D. column provides a speed gain of 1.74, but all other parameters investigated were better for the 0.15 mm I.D. column concerning more efficient sample transfer from inlet to the column using splitless injection, no discrimination with split injection. Better sample capacity (three times higher for the 0.15 mm than for the 0.10 mm I.D. column) resulted in improved ruggedness and simpler fast GC-MS method development.     

Preparation of thermally stable phenylpolysiloxane fused silica capillary columns. Optimization and evaluation of the deactivation by capillary GC and solid state 29Si NMR

The deactivation of fused silica capillary columns with a laboratory-made poly-diphenylvinylmethylhydrosiloxane copolymer has been investigated. The deactivation obtained at different temperatures and reaction times is characterized with a dual column capillary GC system [1]. In parallel, the effect of the silylation temperatures and reaction times on the nature, the structure, and the chemical properties of the deactivation layer has also been studied by solid-state ²⁹Si NMR spoctroscopy. A fumed silica, Cab-O-Sil M5, was used as a model substrate for these spectroscopic studies. The deactivated fused silica capillaries show an excellent thermal stability (up to 400°C), a high resistance to solvolysis, and a minimal interaction to various critical test components. A good wettability of the fused silica capillary columns deactivated with this reagent was confirmed by successful subsequent coating with polysiloxanes with different phenyl contents.     

A Simple Method to Prepare On‐Capillary Frits for Micro‐Column Separation

Sintering stainless steel powders was initially used to prepare the inlet frit in fused silica capillaries. The use of such inlet frits and outlet frits sintered by the stationary phase itself in the capillary to retain C₁₈ particles was demonstrated to withstand the long exposure, up to a high pressure of 60 MPa, for packing and the prepare column was stable and robust enough to do the continuous chromatographic operations. Characterization of the inlet and outlet frits by scanning electron micrography showed the fused metal particles formed a porous network in the capillary inlet and the homogenous separation beddings were obtained by slurry packing.     

Parts per quadrillion level ultra-trace determination of polar and nonpolar compounds via solvent-free capillary microextraction on surface-bonded sol-gel polytetrahydrofuran coating and gas chromatography-flame ionization detection

Sol-gel polytetrahydrofuran (poly-THF) coating was developed for high-sensitivity sample preconcentration by capillary microextraction (CME). Parts per quadrillion (ppq) level detection limits were achieved for both polar and nonpolar analytes through sample preconcentration on sol-gel poly-THF coated microextraction capillaries followed by gas chromatography (GC) analysis of the extracted compounds using a flame ionization detector (FID). The sol-gel coating was in situ created on the inner walls of a fused silica capillary using a sol solution containing poly-THF as an organic component, methyltrimethoxysilane (MTMOS) as a sol-gel precursor, trifluoroacetic acid (TFA, 5% water) as a sol-gel catalyst, and hexamethyldisilazane (HMDS) as a deactivating reagent. The sol solution was introduced into a hydrothermally-treated fused silica capillary and the sol-gel reactions were allowed to take place inside the capillary for 60 min. A wall-bonded coating was formed due to the condensation of silanol groups residing on the capillary inner surface with those on the sol-gel network fragments evolving in close vicinity of the capillary walls. Poly-THF is a medium polarity polymer, and was found to be effective in carrying out simultaneous extraction of both polar and nonpolar analytes. Efficient extraction of a wide range of trace analytes from aqueous samples was accomplished using sol-gel poly-THF coated fused silica capillaries for further analysis by GC. The test analytes included polycyclic aromatic hydrocarbons (PAHs), aldehydes, ketones, chlorophenols, and alcohols. To our knowledge, this is the first report on the use of a poly-THF based sol-gel material in analytical microextraction. Sol-gel poly-THF coated CME capillaries showed excellent solvent and thermal stability (>320 degrees C).     

Injector-internal thermal desorption from edible oils performed by programmed temperature vaporizing (PTV) injection

Injector-internal thermal desorption is a promising technique for the analysis of a wide range of food components (e.g., flavors) or food contaminants (e.g., solvent residues, pesticides, or migrants from packaging materials) in edible oils and fats or fatty food extracts. Separation from the fatty matrix occurs during injection. Using programmed temperature vaporizing (PTV) injection, the oily sample or sample extract was deposited on a small pack of glass wool from which the components of interest were evaporated and transferred into the column in splitless mode, leaving behind the bulk of the matrix. Towards the end of the analysis, the oil was removed by heating out the injector and backflushing the precolumn. The optimization dealt with the gas supply configuration enabling backflush, the injector temperature program (sample deposition, desorption, and heating out), separation of the sample liquid from the syringe needle and positioning it on a support, deactivation of the support surface, holding the plug of fused silica wool by a steel wire, and the analytical sequence maintaining adsorptivity at the desorption site low. It was performed for a mixture of poly(vinyl chloride) (PVC) plasticizers in oil or fatty food. Using MS in SIM, the detection limit was below 0.1 mg/kg for plasticizers forming single peaks and 1 mg/kg for mixtures like diisodecyl phthalate. For plasticizers, RSDs of the concentrations were below 10%; for the slip agents, oleamide and erucamide, it was 12%. The method of incorporating PTV injection was used for about one year for determining the migration from the gaskets of lids for glass jars into oily foods.     

Gas chromatographic retention in uncoated fused silica capillaries

Understanding of retention in uncoated fused‐silica capillaries is of interest due to increased attention on precolumn backflushing in capillary GC. Uncoated capillaries offer several advantages as precolumns compared to coated precolumns. In order to examine the possibility of predicting elution temperatures of alkanes from uncoated capillaries a priori, several sizes of deactivated but uncoated fused‐silica capillaries were evaluated under various operating conditions. Retention was found to depend on dimensionless ramp rate (°C/t_M), sample loading (capacity), flow mode, and column dimensions (probably related to surface area).     

Capillary Electrochromatography of Pyrimidine Derivatives Using UV and Mass Spectrometric Detection

 The separation of pyrimidine derivatives by capillary electrochromatography (CEC) using either UV or mass spectrometric detection is described. For UV detection an aqueous phosphate carrier electrolyte containing acetonitrile is employed. The results are compared to the analysis of the same compounds by micellar electrokinetic chromatography in terms of selectivity, migration times, linearity, and detection limits. For the combination of CEC and mass spectrometry (MS) an inexpensive way to couple commercially available instruments is presented; the interface consists of an electrically grounded stainless steel connector (containing a stainless steel frit) serving as the electrode and coupling the CEC capillary with a fused silica transfer capillary to the MS instrument. Alternatively, a PEEK adapter combining the CEC capillary and a grounded stainless steel transfer capillary serving as the electrode is employed. To avoid the formation of hydrogen gas at the coupling piece or the transfer capillary, p-benzoquinone is added to the carrier electrolyte consisting of aqueous ammonium acetate and acetonitrile.     

Capillary Electrochromatography of Pyrimidine Derivatives Using UV and Mass Spectrometric Detection

Summary.  The separation of pyrimidine derivatives by capillary electrochromatography (CEC) using either UV or mass spectrometric detection is described. For UV detection an aqueous phosphate carrier electrolyte containing acetonitrile is employed. The results are compared to the analysis of the same compounds by micellar electrokinetic chromatography in terms of selectivity, migration times, linearity, and detection limits. For the combination of CEC and mass spectrometry (MS) an inexpensive way to couple commercially available instruments is presented; the interface consists of an electrically grounded stainless steel connector (containing a stainless steel frit) serving as the electrode and coupling the CEC capillary with a fused silica transfer capillary to the MS instrument. Alternatively, a PEEK adapter combining the CEC capillary and a grounded stainless steel transfer capillary serving as the electrode is employed. To avoid the formation of hydrogen gas at the coupling piece or the transfer capillary, p-benzoquinone is added to the carrier electrolyte consisting of aqueous ammonium acetate and acetonitrile. Received July 21, 1999. Accepted July 29, 1999     

Surface tensions of linear and branched alkanes from Monte Carlo simulations using the anisotropic united atom model

The anisotropic united atoms (AUA4) model has been used for linear and branched alkanes to predict the surface tension as a function of temperature by Monte Carlo simulations. Simulations are carried out for n-alkanes ( n-C5, n-C6, n-C7, and n-C10) and for two branched C7 isomers (2,3-dimethylpentane and 2,4-dimethylpentane). Different operational expressions of the surface tension using both the thermodynamic and the mechanical definitions have been applied. The simulated surface tensions with the AUA4 model are found to be consistent within both definitions and in good agreement with experiments.     

Thermoanalytical characterization of polymers: A comparative study between thermogravimetry and evolved gas analysis using a temperature-programmable pyrolyzer

Evolved gas analysis (EGA) was carried out on 15 synthetic polymer samples using a temperature programmable pyrolyzer as a heating unit which was on-line coupled with a MS detector. A deactivated stainless steel tube and a vent free adapter were used to couple the pyrolyzer with the MS detector, and they were placed in a GC oven at 300°C to avoid condensation of evolved gases with high boiling point. Thermograms of polystyrene measured by this system (Py-EGA-MS) showed shifts of the peak temperature to the higher temperature region as the sample mass increased. It was found that the S/N ratios of EGA thermograms were 420-fold superior to those of differential thermogravimetry (DTG) thermograms for the same sample mass of 0.20 mg. Since a good linear relationship was obtained between peak temperatures obtained by Py-EGA-MS and DTG, it can be concluded that Py-EGA-MS can be used to obtain reliable data on thermal properties of samples with high sensitivity and using less sample.     

Molecular simulation and macroscopic modeling of the diffusion of hydrogen, carbon monoxide and water in heavy n-alkane mixtures

The self-diffusion coefficient of hydrogen (H(2)), carbon monoxide (CO) and water (H(2)O) in n-alkanes was studied by molecular dynamics simulation. Diffusion in a few pure n-alkanes (namely n-C(8), n-C(20), n-C(64) and n-C(96)) was examined. In addition, binary n-C(12)-n-C(96) mixtures with various compositions as well as more realistic five- and six-n-alkane component mixtures were simulated. In all cases, the TraPPE united atom force field was used for the n-alkane molecules. The force field for the mixture of n-alkanes was initially validated against experimental density values and was shown to be accurate. Moreover, macroscopic correlations for predicting diffusion coefficient of H(2), CO and H(2)O in n-alkanes and mixtures of n-alkanes were developed. The functional form of the correlation was based on the rough hard sphere theory (RHS). The correlation was applied to simulation data and an absolute average deviation (AAD) of 5.8% for pure n-alkanes and 3.4% for n-alkane mixtures was obtained. Correlation parameters vary in a systematic way with carbon number and so they can be used to provide predictions in the absence of any experimental or molecular simulation data. Finally, in order to reduce the number of adjustable parameters, for the n-alkane mixtures the "pseudo-carbon number" approach was used. This approach resulted in relatively higher deviation from MD simulation data (AAD of 18.2%); however, it provides a convenient and fast method to predict diffusion coefficients. The correlations developed here are expected to be useful for engineering calculations related to the design of the Gas-to-Liquid process.     

Wetting behavior of mixtures of water and nonionic polyoxyethylene alcohol

Five binary water + C4Ej mixtures, water + n-C4E0, water + 2-C4E0, water + iso-C4E0, water + n-C4E1, and water + iso-C4E1, were chosen to perform the surface/interfacial tension measurements over the experimental temperature range from 10 to 85 degrees C at the normal pressure by using a homemade pendent drop/bubble tensiometer. The symbol CiEj is the abbreviation of a nonionic polyoxyethylene alcohol CiH(2i+1)(OCH2CH2)jOH. The wetting behavior of the CiEj-rich phase at the interface separating gas and the aqueous phase is systematically examined according to the wetting coefficient resulting from the experimental data of surface/interfacial tensions measurements. For those systems with a lower critical solution temperature, for example, water + n-C6E2, water + n-C4E1, and water + iso-C4E1, a wetting transition from partial wetting to nonwetting is always observed when the system is brought to close to its lower critical solution temperature. On the other hand, to start with a partial wetting CiEj-rich phase, a wetting transition from partial wetting to complete wetting is always observed when the system is driven to approach its upper critical solution temperature. The effect of hydrophobicity of CiEj on the wetting behavior of the CiEj-rich phase at the interface separating gas and the aqueous phase was carefully investigated by using five sets of mixtures: (1) water + n-C4E0, water + n-C5E0, and water + n-C6E0; (2) water + 2-C4E0 and water + 2-C5E0; (3) water + 2-C4E0 and water + n-C4E0; (4) water + n-C4E1, water + n-C5E1, and water + n-C6E1; (5) water + n-C4E0 and water + n-C4E1. The CiEj-rich phase would tend to drive away from complete wetting (or nonwetting) to partial wetting with an increase in the hydrophobicity of CiEj in the binary water + CiEj system. All the wetting behavior observed in the water + CiEj mixtures is consistent with the prediction of the critical point wetting theory of Cahn.     

Characterization of a lipid-rich fraction synthesized by Streptomyces avermitilis

Isolation of the macrocyclic lactone parasiticide avermectin and other closely related natural products produced by Streptomyces avermitilis also yields a lipid-rich fraction. The latter has been characterized by techniques based on gas-liquid chromatography (GLC) and mass spectrometry (MS). Initial examination of the lipid-rich fraction by direct probe electron-impact (EI) MS and packed-column GLC showed that it consists primarily of a mixture of triglycerides possessing C14-C17 acyl groups. Further examination of this fraction by capillary column GLC-MS demonstrated that it contains low levels of C15-C17 free fatty acids, squalene and diglycerides and, as the major components, at least ten mixed acyl triglycerides (total number of acyl carbon atoms ranging from 43 to 50). Prominent among the triglycerides were a C15-C15-C16 species, a C15-C16-C16 species and a C15-C16-C17 species. Capillary-column GLC and GLC-MS of the fatty acid methyl esters resulting from transesterification demonstrated that the major triglyceride acyl groups are anteiso-C15 (12-methyltetradecanoyl), iso-C16 (14-methylpentadecanoyl), n-C16 (hexa-decanoyl) and anteiso-C17 (14-methylhexadecanoyl). Lower levels of the methyl esters of the following fatty acids were observed: iso-C14 (12-methyltridecanoic), n-C14 (tetradecanoic), iso-C15 (13-methyltetradecanoic), n-C15 (pentadecanoic), iso-C17 (15-methylhexadecanoic) and n-C17 (heptadecanoic). Little evidence was seen for either unsaturated acyl groups or acyl groups of less than 13 or more than 18 carbon atoms. Desorption chemical ionization MS (ammonia reagent gas) analysis confirmed the nature of the lipid-rich fraction, and is an attractive one-step approach for determining the molecular weights and distribution of triglycerides in a mixture.     

Enantioselective self-assembly of bimetallic [Mn(II) (delta)-Cr(III)(C2O4)3]- and [Mn(II) (lambda)-Cr(III)(C2O4)3]- layered anionic networks templated by the optically active (Rp)- and (Sp)-[1-CH2N(n-C3H7)3-2-CH3-C5H3Fe-C5H5]+ ions

The ferrocenic ammonium (Rp)- and (Sp)-[1-CH2NR(3-)-2-CH3-C5H3Fe-C5H5] iodide salts with R=CH3, C2H5, n-C3H7, n-C4H9, were synthesized starting from the (Rp)- and (Sp)-[1-CH2N(CH3)2-2-CH3-C5H3Fe-C5H5] amines obtained in their optically active forms through asymmetric cyclopalladation of [C5H5Fe-C5H4CH2N(CH3)2]. 1H NMR studies of these planar chiral 1,2-disubstituted ferrocenic ammonium iodide salts in the presence of the (Delta)-(tris(tetrachlorobenzenediolato)phosphate(V) anion), [(Delta)-Trisphat] support the formation of specific diastereomeric ion pairs. Such intermolecular interactions can be related to the self-assembly of the two-dimensional optically active compounds [[(Sp)-1-CH2N(n-C3H7)3-2-CH3-C5H3Fe-C5H5][Mn (Delta)-Cr(C2O4)3]] and [[(Rp)-1-CH2N(n-C3H7)3-2-CH3-C5H3Fe-C5H5][Mn (Lambda)-Cr(C2O4)3]] starting from the resolved (Rp)- and (Sp)-[1-CH2N(n-C3H7)3-2-CH3-C5H3Fe-C5H5]+ ion associated to the racemic anionic building block rac-[Cr(C2O4)3]3- and Mn2+. Both enantiomeric forms of the networks behave as ferromagnets with a Curie temperature of 5.7 K.