Preparation of iron—polysiloxane vertically ordered microneedles from a suspension of iron microparticles in liquid silicone rubber

Russian Chemical Bulletin - A simple method for the preparation of the vertically located flexible iron—polysiloxane magnetic needles up to 12 mm long by the self-organization of iron...     

Effect of π–π interaction between carbon nanotubes and phenyl groups on the thermal stability of silicone rubber

Journal of Thermal Analysis and Calorimetry - To investigate the effect and mechanism of π–π interaction between carbon nanotubes (CNTs) and phenyl groups on the thermal stability...     

In situ silica reinforcement of natural rubber by sol–gel process via rubber solution

The in situ silica filling of natural rubber (NR) was carried out via the sol–gel reaction using tetraethoxysilane. The effect of the in situ silica content on the curing, mechanical, dynamic mechanical and thermal properties of the composite vulcanizate materials was investigated in comparison to that with a commercial silica preparation. The Mooney viscosity of the in situ silica filled NR vulcanizates showed a lower value compared with that of the commercial filled ones. The mechanical properties of the in situ silica composite materials, i.e., the moduli and compression set, were improved compared with the commercial silica filler NR vulcanizates. The reinforcement effect of in situ silica did not accord with the Smallwood equation but in contrast was in good agreement with the Guth and Gold equation using a shape factor (f) which itself was in close agreement with estimates derived from independent TEM analysis. The pseudo-network structure of the in situ silica was low, which resulted in a lower storage modulus at 25 °C. By filling NR with in situ silica, the thermal properties of the composite vulcanized material were also improved, and well dispersed in situ silica particles within the NR matrix were also observed.     

Dielectric properties of perbunan rubber: γ-irradiation effects

A systematic dielectric study over a frequency range extending from 200 Hz to 100 kHz and temperature ranging from 20° to 60°C has been carried out on perbunan rubber. The acrylonitrile content of the rubber samples was 28% and 38%. The effect of 15 MR γ-irradiation on the dielectric properties of both samples was studied and the results are interpreted. The study revealed that NBR-38 is better than NBR-28 for insulating purposes.     

Production of spiked vegetation samples containing γ-emitting radionuclides for proficiency testing

Journal of Radioanalytical and Nuclear Chemistry - The production of environmental reference materials such as soil, sediment, water and vegetation containing radionuclides for interlaboratory...     

Design and synthesis of novel triazole derivatives containing γ-lactam as potential antifungal agents

A series of novel triazole derivatives containing γ-lactam were designed and synthesized, and their structures were confirmed by ~1H NMR,~(13)CNMR and HRMS. The in vitro antifungal activities of the target compounds were evaluated. The results showed that all of the compounds exhibited stronger activity against the six clinically important fungi tested than fluconazole. 3D and 3E showed comparative activity against the fungi tested except for Candida glabrata and Aspergillus fumigatus as voriconazole. In addition,the docking model for 2A and CYP51 was investigated.     

Reactions of γ-sultones containing a polycyclic fragment

Hydrolytic cleavage of cage γ-sultones have been studied. Alkaline hydrolysis of homoadamantane γ-sultone leads to the formation of sulfonates with erythro configuration. The reduction of homoadamantane γ-sultone with LiAlH₄–AlCl₃ yields desulfurization and deoxygenation products.     

Synthesis of heterospirans containing a γ-lactone ring

Reactions of α-ketols with diethyl malonate at the molar ratio 2:1 in the presence of K₂CO₃ were investigated. The heterospiranes obtained contained a dihydrofuran and a γ-lactone rings. The optimum conditions for the synthesis of heterospiranes were found by varying the ratio of the initial compounds: α-ketoalcohol (or 2-ethoxycarbonyl-, 2-methoxycarbonyl-, 2-cyano-3,4,4-trimethyl-2-buten-4-olides), diethyl malonate, K₂CO₃, by varying the environment, and also the temperature and the time of the reaction.     

Room-temperature vulcanized silicone rubber/barium titanate–based high-performance nanocomposite for energy harvesting

Rubber composites were prepared for elastomer slab by mixing barium titanate (BaTiO₃), carbon nanotube (CNT), carbon black (CB), and room-temperature vulcanized (RTV) silicone rubber. An electrode was prepared from composite for energy harvesting with fillers such as CB and CNT, and RTV thinner was used to improve the processing of the specimen. At 50 phr of BaTiO₃, there is an increase in compressive modulus by 180%. There was a correlation between prestrain and biaxial strain in enhancing the energy generation. After poling of the rubber composite containing 50 phr of BaTiO₃ at 11 kV/mm, the energy harvesting was increased at all strains. In durability test at 70 phr of BaTiO₃ for 60% cyclic biaxial strain, the drop in voltage from the piezoelectric energy harvesting was almost zero for 3000 cycles.     

Application of γ-cyclodextrin for the stabilization and/or dispersion of vegetable oils containing triglycerides of

To improve the storage stability of instable vegetable oils with a high content of polyunsaturated fatty acid triglycerides, these essential compounds can be complexed with native cyclodextrins. Only with -CD a nearly complete complexation of the oils was achieved as shown by complexation kinetics measurements. Storage trials of the insoluble CD-complexes followed by the determination of the peroxide value of the oils indicated that the best stabilization against autoxidation is obtained with -CD. An additional benefit of the complexation of triglycerides of polyunsaturated fatty acids with -cyclodextrin is the formation of stable dispersions of these oils in aqueous media.     

Synthesis of a benzoxazine monomer containing maleimide and allyloxy groups

A novel benzoxazine monomer 3-（4-allyloxy）phenyl-3,4-dihydro-2H-6-（N-maleimido）-l,3-benzoxazine （AMB） was synthesized and structure was confirmed by FT-IR, 1H NMR. Thermal analysis （DSC） of AMB showed the introduction of allyloxy group melting point and exhibited a narrow and symmetric curing exothermic window.     

Organo-catalyzed enantioselective synthesis of some β-silyl γ-alkyl γ-butyrolactones as intermediates for natural products

The enantioselective synthesis of some β-silyl γ-alkyl γ-butyrolactones has been achieved by an organo-catalyzed Michael addition of enolizable aldehydes onto a silylmethylene malonate followed by a silicon-facilitated Bayer–Villiger oxidation of the β-silyl aldehyde adducts as the key step. γ-Alkyl γ-butenolides were obtained from the β-silyl γ-alkyl γ-butyrolactones by Fleming–Tamao oxidation of the silyl group to a hydroxy group and subsequent elimination. These butenolides are the advanced intermediates of some natural products such as (+)-γ-caprolactone, (+)-methylenolactocine, and (?)-quercus lactone.     

Hybrid organic–inorganic silica monolith with hydrophobic/strong cation-exchange functional groups as a sorbent for micro-solid phase extraction

A hybrid organic–inorganic silica monolith with hydrophobic and strong cation-exchange functional groups was prepared and used as a sorbent for micro-solid phase extraction (micro-SPE). The hybrid silica monolith functionalized with octyl and thiol groups was conveniently synthesized by hydrolysis and polycondensation of a mixture of tetraethoxysilane (TEOS), n-octyltriethoxysilane (C8-TEOS) and 3-mercaptopropyltrimethoxysilane (MPTMS) via a two-step catalytic sol–gel process. Due to the favorable chemical reactivity of mercapto pendant moieties, the obtained hybrid monolith was oxidized using hydrogen peroxide (30%, w/w) to yield sulfonic acid groups, which provided strong cation-exchange sites. The obtained hybrid monolith was characterized by diffused infrared spectroscopy, elemental analysis, scanning electron microscopy and mercury intrusion porosimetry. The results show that the resulting monolith contains much higher carbon (31.6%) and sulfur (4.8%) contents than traditionally bonded silica materials. The extraction performance of the hybrid monolith was evaluated using sulfonamides as testing analytes by micro-SPE on-line coupled to HPLC. The results show that the hybrid monolith with hydrophobic and strong cation-exchange functional groups exhibits high extraction efficiency towards the testing analytes. The column-to-column RSD values were 1.3–9.8% for the extraction of SAs investigated. The extraction performance of the hybrid silica monolith remained practically unchanged after treated with acid (pH 1.0) and basic solutions (pH 10.5). Finally, the application of the hybrid monolith was demonstrated by micro-SPE of sulfonamide residues from milk followed by HPLC–UV analysis. The limits of detection (S/N = 3) for eight SAs were found to be 1.0–3.0 ng/mL in milk. The recoveries of eight SAs spiked in milk sample ranged from 80.2% to 115.6%, with relative standard deviations less than 11.8%.     

Non-surfactant synthesis of mesoporous silica with dye as template

A novel non-suffactant method was described to synthesize mesoporous silica using dye basic fuchsin as template.Chemical reactions were introduced into the formation of mesopores rather than the weak electrostatic or hydrogen-bonding interactions in the traditional surfactant routes.The reactant composition was found to be crucial to the pore structure of objective product.The formation mechanism of mesopore was also proved.     

Mesoporous silica particles for selective detection of dopamine with β-cyclodextrin as the selective barricade

A mesoporous silica nanoparticle (MSN) based fluorescent sensor for dopamine was constructed with probes inside particle pores and β-cyclodextrin (β-CD) molecules on the particle surface as the selective barricade. The synergistic action of both the hydrophilic rim and hydrophobic cavity of β-CD ensures that the sensor can distinguish dopamine from other biological competitors.     

β-cyclodextrin-bonded silica particles as novel sorbent for stir bar sorptive extraction of phenolic compounds

A stir bar coated with β-cyclodextrin-bonded-silica (CDS) as novel sorbent has been developed and used to analyze seven phenolic compounds in aqueous samples, followed by thermal desorption and gas chromatography-mass spectrometric detection. Significant parameters affecting sorption process such as the time and temperature of sorption and desorption, ionic strength, pH and stirring rate have been optimized and discussed. The coating has a high thermal stability up to 300°C and long application lifetime (80 times). The porous structure of CDS coating provides high surface area and allows high extraction efficiency. Under the selected conditions, linearity range of 0.1-400 μg/L, limit of quantifications of 0.08-3.3 μg/L and method detection limits of 0.02-1.00 μg/L have been obtained. A satisfactory repeatability (RSD ≤ 6.5, n = 7) with good linearity (0.9975 ≤ r(2) ≤ 0.9996) of results illustrated a good performance of the present method. The recovery of different natural water samples was higher than 81.5%.     

Synthesis and characterization of novel sulfonated polyimide containing phthalazinone moieties as PEM for PEMFC

A novel sulfonated diamine monomer,1,2-dihydro-2-(3-sulfonic-4-aminophenyl)-4-[4-(4-aminophenoxy)-phenyl]phthalazin- 1-one(S-DHPZDA),was successfully synthesized by direct sulfonation of diamine 1,2-dihydro-2-(4-aminophenyl)-4-[4-(4- aminophenoxy)-phenyl]-phthalazin-1-one(DHPZDA).A series of sulfonated polyimides(SPIs),which can be used as the material of the proton exchange membrane(PEM)for the proton exchange membrane fuel cell(PEMFC),were prepared from 1,4,5,8- naphthalenetetracarboxylic dianhydride(NTDA),S-DHPZDA,and nonsulfonated diamines DHPZDA.The structure of the monomer and polymers were characterized by FT-IR and~1H NMR.The solubility of the S-DHPZDA-based SPIs has been improved due to the induction of the phthalazione moiety.The SPIs membranes have high thermo-stability,predominant swelling resistance with high ion exchange capacity.     

Effect of sol–gel derived in situ silica on the morphology and mechanical behavior of natural rubber and acrylonitrile butadiene rubber blends

Silica particles were generated and grown in situ by sol–gel method into rubber blends comprised of natural rubber (NR) and acrylonitrile butadiene rubber (NBR) at various blend ratios. Silica formed into rubber matrix was amorphous in nature. Amount of in situ silica increased with increase in natural rubber proportion in the blends during the sol–gel process. Morphology studies showed that the generated in situ silica were nanoparticles of different shapes and sizes mostly grown into the NR phase of the blends. In situ silica filled NR/NBR blend composites showed improvement in the mechanical and dynamic mechanical behaviors in comparison to those of the unfilled and externally filled NR/NBR blend composites. For the NR/NBR blend at 40/60 composition, in particular, the improvement was appreciable where size and dispersion of the silica particles into the rubber matrix were found to be more uniform. Dynamic mechanical analysis revealed a strong rubber–in situ silica interaction as indicated by a positive shift of the glass transition temperature of both the rubber phases in the blends.     

Quantum-dots containing Fe/SBA-15 silica as “green” catalysts for the selective photocatalytic oxidation of alcohol (methanol,under visible light)

Fe/SBA-15 catalysts containing iron oxide nanoparticles confined inside silica pores (replicated, internal, poorly crystalline) and grown outside silica grains (external, mainly crystalline hematite) in different proportions are prepared using a single silica support. Fe-species are deposited by the two-solvent technique with two iron salts precursors (Fe(NO₃)₃·9H₂O, FeCl₃·6H₂O) and two solvents (cyclohexane, hexane) for 11 wt% of iron. Calcination is performed in reproducible conditions (700 °C, 2 °C/min, thin bed, in air). SAXS measurements are used to show that the 2D hexagonal structure of the used silica is maintained after Fe-loading and calcination. Ar sorption measurements show that the pores are partially plugged. The oxidation of pure methanol is used as a test reaction to compare photocatalytic properties. H₂O₂ and visible light both activate the reaction. More active catalysts are formed with hexane associated with FeCl₃·6H₂O than with Fe(NO₃)₃·9H₂O. A reversed situation is observed with cyclohexane. Iron leaching (after 1 h 30 of test, up to 3 mg of Fe by mL) is important. These results are expected to be of interest in the exploration of size and shape “nanocatalysis” and to provide a further understanding for the reactions that take place when porous silicas are used as supports.     

Synthesis of γ-carbolines containing NO-donor fragment and assessment of their anticholinesterase activity

Russian Chemical Bulletin - Hybrid γ-carboline-based compounds containing a nitrooxy group as an NO-donor were prepared. It was shown that the introduction of this group did not affect the...