Protein-assisted solubilization of single-walled carbon nanotubes

We report a simple method that uses proteins to solubilize single-walled carbon nanotubes (SWNTs) in water. Characterization by a variety of complementary techniques including UV-Vis spectroscopy, Raman spectroscopy, and atomic force microscopy confirmed the dispersion at the individual nanotube level. A variety of proteins differing in size and structure were used to generate individual nanotube solutions by this noncovalent functionalization procedure. Protein-mediated solubilization of nanotubes in water may be important for biomedical applications. This method of solubilization may also find use in approaches for controlling the assembly of nanostructures, and the wide variety of functional groups present on the adsorbed proteins may be used as orthogonal reactive handles for the functionalization of carbon nanotubes.     

Highly selective directed assembly of functional actomyosin on Au surfaces

The capability of assembling biomotors onto specific locations of solid substrates is a key for development of biomotor-based nanomechanical systems. We developed a method to direct the assembly of the heavy meromyosin fragment from rabbit skeletal muscle myosin onto specific locations of Au substrates utilizing surface molecular patterns. In this strategy, chemically directed patterns of streptavidin were achieved to direct highly specific assembly of biotinylated heavy meromyosin on the substrates--a strategy applicable for patterning a variety of biotinylated molecules--while BSA was utilized to avoid nonspecific adsorption. In vitro motility assays of filament sliding were used to confirm functionality of assembled actomyosin.     

Construction of various nanostructures on carbon nanotube films

Construction of nanostructures on surfaces has appealed intensive attention due to its significant applications in diverse fields. Especially, engineering surface properties via surficial nanostructures is actually the creation of functional interface-based materials and slated to be the key aspect for the future of materials science. Although many efforts have been made, there are only a few reports about the construction of nanostructures on carbon nanotube film surfaces. The big challenge for constructing on carbon films is that these carbon assemblies are easy to be dispersed by immersion in a chemical solution. Here, in this paper, we have shown for the first time the fabrication of different kinds of nanostructures, i.e. nanoneedles, nanoparticles, nanospirals, on carbon nanotube films by using facile and cheap electrodeposition method and precise physical deposition method. We pretreat the films by an electrical method to strengthen the films to avoid dispersion during the electrodeposition process. These composite films are still very flexible after coating with nanostructures. Compared with those precise physical deposition methods, the facile electrodeposition method is more suitable for constructing nanostructures on carbon nanotube films, due to the low requirement for planeness of films. It is interesting to find that these nanostructures can endow superhydrophobicity or higher conductivity for these flexible composite films, which greatly broaden the potential applications for carbon nanotube films in the fields of battery, moisture self-cleaning, electrostatic energy harvesting, and enhancing condensation heat transfer for more efficiency of energy utilization, environmental, and thermal management.     

Carbon nanotube transistors for biosensing applications

Electronic detection of biomolecules, although still in its early stages, is gradually emerging as an effective alternative to optical detection methods. We describe field effect transistor devices with carbon nanotube conducting channels that have been developed and used for biosensing and biodetection. Both transistors with single carbon nanotube conducting channels and devices with nanotube network conducting channels have been fabricated and their electronic characteristics examined. The devices readily respond to changes in the environment, and such effects have been examined using gas molecules and coatings with specific properties. Device operation in (conducting) buffer and in a dry environment--after buffer removal--is also discussed. Applications in the biosensing area are illustrated with three examples: the investigation of the interaction between devices and biomolecules, the electronic monitoring of biomolecular processes, and attempts to integrate cell membranes with active electronic devices.     

模板法合成纳米结构材料

模板法（包括硬模板和软模板法）是制备纳米结构材料的常用方法,可用来制备多种物质的各种形状（如：球形粒子、一维纳米棒、纳米线、纳米管以及二维有序阵列等）的纳米结构,近年来关于这一领域的研究较为活跃。本文介绍了近年来利用氧化铝、二氧化硅、碳纳米管、表面活性剂、聚合物、生物分子等作模板制备多种物质的纳米结构材料的一些进展。     

Monte Carlo Simulation and Experimental Studies of CO2, CH4 and Their Mixture Capture in Porous Carbons

Adsorption of carbon dioxide and methane in porous activated carbon and carbon nanotube was studied experimentally and by Grand Canonical Monte Carlo (GCMC) simulation. A gravimetric analyzer was used to obtain the experimental data, while in the simulation we used graphitic slit pores of various pore size to model activated carbon and a bundle of graphitic cylinders arranged hexagonally to model carbon nanotube. Carbon dioxide was modeled as a 3-center-Lennard-Jones (LJ) molecule with three fixed partial charges, while methane was modeled as a single LJ molecule. We have shown that the behavior of adsorption for both activated carbon and carbon nanotube is sensitive to pore width and the crossing of isotherms is observed because of the molecular packing, which favors commensurate packing for some pore sizes. Using the adsorption data of pure methane or carbon dioxide on activated carbon, we derived its pore size distribution (PSD), which was found to be in good agreement with the PSD obtained from the analysis of nitrogen adsorption data at 77 K. This derived PSD was used to describe isotherms at other temperatures as well as isotherms of mixture of carbon dioxide and methane in activated carbon and carbon nanotube at 273 and 300 K. Good agreement between the computed and experimental isotherm data was observed, thus justifying the use of a simple adsorption model.     

Room-temperature assembly of directional carbon nanotube strings

Micromold with microchannels was employed in assembly of directional free-standing single-walled carbon nanotube (SWNT) strings at room temperature. The new postgrowth assembly approach could, in principle, apply not only to a wide range of SWNTs in their soluble or dispersible forms, including small diameter (0.7-0.8 nm) SWNTs, covalent- and noncovalent-functionalized SWNTs, monodispersed SWNTs with identical diameter and chirality, and fullerenes@SWNTs, which either cannot survive the high-temperature treatment or cannot be synthesized by current CVD method, but also to other soluble or dispersible one-dimensional nanostructures.     

Molecular dynamics simulation of polyethylene on single wall carbon nanotube

Molecular dynamics simulations are carried out on the isothermal crystallization process of single polyethylene chains with different chain lengths on the single wall carbon nanotube. This process is summarized as two steps, i.e., adsorption and orientation, and the bond-orientational order parameter is used to show the details of this process. The results show that the attractive van der Waals interactions control the adsorption and orientation of polyethylene on single wall carbon nanotube, and as the chain length increases, more microstructures appear in the last ordered structure. The stems of the ordered structure align parallel to the single wall carbon nanotube axis.     

Graphene as a spacer to layer-by-layer assemble electrochemically functionalized nanostructures for molecular bioelectronic devices

This study demonstrates the capability of graphene as a spacer to form electrochemically functionalized multilayered nanostructures onto electrodes in a controllable manner through layer-by-layer (LBL) chemistry. Methylene green (MG) and positively charged methylimidazolium-functionalized multiwalled carbon nanotubes (MWNTs) were used as examples of electroactive species and electrochemically useful components for the assembly, respectively. By using graphene as the spacer, the multilayered nanostructures of graphene/MG and graphene/MWNT could be readily formed onto electrodes with the LBL method on the basis of the electrostatic and/or π-π interaction(s) between graphene and the electrochemically useful components. Scanning electron microscopy (SEM), ultraviolet-visible spectroscopy (UV-vis), and cyclic voltammetry (CV) were used to characterize the assembly processes, and the results revealed that nanostructure assembly was uniform and effective with graphene as the spacer. Electrochemical studies demonstrate that the assembled nanostructures possess excellent electrochemical properties and electrocatalytic activity toward the oxidation of NADH and could thus be used as electronic transducers for bioelectronic devices. This potential was further demonstrated by using an alcohol dehydrogenase-based electrochemical biosensor and glucose dehydrogenase-based glucose/O(2) biofuel cell as typical examples. This study offers a simple route to the controllable formation of graphene-based electrochemically functionalized nanostructures that can be used for the development of molecular bioelectronic devices such as biosensors and biofuel cells.     

Amine basicity (pKb) controls the analyte binding energy on single walled carbon nanotube electronic sensor arrays

A wide range of analytes adsorb irreversibly to the surfaces of single walled carbon nanotube electronic networks typically used as sensors or thin-film transistors, although to date, the mechanism is not understood. Using thionyl chloride as a model electron-withdrawing adsorbate, we show that reversible adsorption sites can be created on the nanotube array via noncovalent functionalization with amine-terminated molecules of pKa < 8.8. A nanotube network comprising single, largely unbundled nanotubes, near the electronic percolation threshold is required for the effective conversion to a reversibly binding array. By examining 11 types of amine-containing molecules, we show that analyte adsorption is largely affected by the basicity (pKb) of surface groups. The binding energy of the analyte is apparently reduced by its adsorption on the surface chemical groups instead of directly on the SWNT array itself. This mediated adsorption mechanism is supported by X-ray photoelectron spectroscopy (XPS) and molecular potential calculations. Reversible detection with no active regeneration at the parts-per-trillion level is demonstrated for the first time by creating a higher adsorption site density with a polymer amine, such as polyethyleneimine (PEI). Last, we demonstrate that this transition to reversibility upon surface functionalization is a general phenomenon.     

Hydrothermal synthesis of carbon nanotube/cobalt oxide core-shell one-dimensional nanocomposite and application as an anode material for lithium-ion batteries

Carbon nanotube/cobalt oxide core-shell one-dimensional nanostructures were prepared via a hydrothermal synthesis method, in which nanosize cobalt oxide crystals were homogeneously coated on the surface of carbon nanotubes. The morphologies and crystal structures of the as-prepared core-shell nanocomposites were analysed by X-ray diffraction, field emission gun scanning electron microscopy, and transmission electron microscopy. When applied as anodes in lithium-ion cells, carbon nanotube/cobalt oxide core-shell nanostructures exhibited an initial lithium storage capacity of 1250 mAh/g and a stable capacity of 530 mAh/g over 100 cycles. The good electrochemical performance could be attributed to the nanocrystalline cobalt oxide and the unique core-shell one-dimensional nanostructures.     

Electrochemical Biosensing Platform Using Carbon Nanotube Activated Glassy Carbon Electrode

Carbon nanotube enhanced electrochemically activated glassy carbon electrode (GCE) has been prepared and applied for sensitive electrochemical determination of DNA and DNA bases. The results indicate that the relative activation could efficiently enhance electron transfer at the pretreated GCE so that this carbon nanotube activated glassy carbon electrode could provide relatively low detection limit with good reproducibility for the respective biomolecular determination. Besides, greatly enhanced sensitivity could be obtained for the relevant electrochemical detection of the bio‐recognition process including DNA biosensing by using the carbon nanotube activated GCE. This approach provided a detection limit of 7.5 nM for guanine and 150 ng/mL for acid denatured DNA. These observations suggest that the carbon nanotube activated glassy carbon electrode could be utilized as a very sensitive and stable biosensor for some specific biological process.     

Analysis of stability of nanotube dispersions using surface tension isotherms

In this paper, we present the analyses of surface tension of surfactant-stabilized dispersions of carbon nanotubes. This method allows one to study interactions of carbon nanotubes with surfactants at different levels of nanotube loading when optical methods fall short in quantifying the level of nanotube separation. Sodium dodecyl sulfate was used as a stabilizing agent to uniformly disperse single-walled carbon nanotubes in an aqueous media. We show that surface tension is very sensitive to small changes of nanotube and surfactant concentrations. The experimental data suggest that, at moderate concentrations, surfactant displaces carbon nanotubes from the air-water interface and the nanotubes are mostly moved into the bulk of the liquid. By analyzing the surface tension as a function of surfactant concentration, we obtained the dependence of critical micelle concentration on nanotube loading. We then constructed the adsorption isotherm for dodecyl sulfate on carbon nanotubes and bundles of carbon nanotubes. The results of these experiments enabled us to extend the phase diagram of the produced dispersions to a broader range of surfactant and nanotube concentrations.     

Distribution of carbon nanotube sizes from adsorption measurements and computer simulation

The method for the evaluation of the distribution of carbon nanotube sizes from the static adsorption measurements and computer simulation of nitrogen at 77 K is developed. We obtain the condensation/evaporation pressure as a function of pore size of a cylindrical carbon tube using Gauge Cell Monte Carlo Simulation (Gauge Cell MC). To obtain the analytical form of the relationships mentioned above we use Derjaguin-Broekhoff-deBoer theory. Finally, the pore size distribution (PSD) of the single-walled carbon nanohorns (SWNHs) is determined from a single nitrogen adsorption isotherm measured at 77 K. We neglect the conical part of an isolated SWNH tube and assume a structureless wall of a carbon nanotube. We find that the distribution of SWNH sizes is broad (internal pore radii varied in the range 1.0-3.6 nm with the maximum at 1.3 nm). Our method can be used for the determination of the pore size distribution of the other tubular carbon materials, like, for example, multiwalled or double-walled carbon nanotubes. Besides the applicable aspect of the current work the deep insight into the problem of capillary condensation/evaporation in confined carbon cylindrical geometry is presented. As a result, the critical pore radius in structureless single-walled carbon tubes is determined as being equal to three nitrogen collision diameters. Below that size the adsorption-desorption isotherm is reversible (i.e., supercritical in nature). We show that the classical static adsorption measurements combined with the proper modeling of the capillary condensation/evaporation phenomena is a powerful method that can be applied for the determination of the distribution of nanotube sizes.     

Layer-by-layer electrostatic self-assembly of single-wall carbon nanotube polyelectrolytes

We have used anionic and cationic single-wall carbon nanotube polyelectrolytes (SWNT-PEs), prepared by the noncovalent adsorption of ionic naphthalene or pyrene derivatives on nanotube sidewalls, for the layer-by-layer self-assembly to prepare multilayers from carbon nanotubes with polycations, such as poly(diallyldimethylammonium) or poly(allylamine hydrochloride) (PDADMA or PAH, respectively), and polyanions (poly(styrenesulfonate), PSS). This is a general and powerful technique for the fabrication of thin carbon nanotube films of arbitrary composition and architecture and allows also an easy preparation of all-SWNT (SWNT/SWNT) multilayers. The multilayers were characterized with vis-near-IR spectroscopy, X-ray photoelectron spectroscopy (XPS), surface plasmon resonance (SPR) measurements, atomic force microscopy (AFM), and imaging ellipsometry. The charge compensation in multilayers is mainly intrinsic, which shows the electrostatic nature of the self-assembly process. The multilayer growth is linear after the initial layers, and in SWNT/polyelectrolyte films it can be greatly accelerated by increasing the ionic strength in the SWNT solution. However, SWNT/SWNT multilayers are much more inert to the effect of added electrolyte. In SWNT/SWNT multilayers, the adsorption results in the deposition of 1-3 theoretical nanotube monolayers per adsorbed layer, whereas the nominal SWNT layer thickness is 2-3 times higher in SWNT/polyelectrolyte films prepared with added electrolyte. AFM images show that the multilayers contain a random network of nanotube bundles lying on the surface. Flexible polyelectrolytes (e.g., PDADMA, PSS) probably surround the nanotubes and bind them together. On macroscopic scale, the surface roughness of the multilayers depends on the components and increases with the film thickness.     

Distribution patterns and controllable transport of water inside and outside charged single-walled carbon nanotubes

The density distribution patterns of water inside and outside neutral and charged single-walled carbon nanotubes (SWNTs) soaked in water have been studied using molecular dynamics simulations based on TIP3P potential and Lennard-Jones parameters of CHARMM force field, in conjunction with ab initio calculations to provide the electron density distributions of the systems. Water molecules show different electropism near positively and negatively charged SWNTs. Different density distribution patterns of water, depending on the diameter and chirality of the SWNTs, are observed inside and outside the tube wall. These special distribution patterns formed can be explained in terms of the van der Waals and electrostatic interactions between the water molecules and the carbon atoms on the hexagonal network of carbon nanotubes. The electric field produced by the highly charged SWNTs leads to high filling speed of water molecules, while it prevents them from flowing out of the nanotube. Water molecules enter the neutral SWNTs slowly and can flow out of the nanotube in a fluctuating manner. It indicates that by adjusting the electric charge on the SWNTs, one can control the adsorption and transport behavior of polar molecules in SWNTs to be used as stable storage medium with template effect or transport channels. The transport rate can be tailored by changing the charge on the SWNTs.     

Direct attachment of well-aligned single-walled carbon nanotube architectures to silicon (100) surfaces: a simple approach for device assembly

A new approach for the attachment of vertically-aligned shortened carbon nanotube architectures to a silicon (100) substrate by chemical anchoring directly to the surface has been demonstrated for the first time. The ordered assembly of single-walled carbon nanotubes (SWCNTs) was accomplished by hydroxylating the silicon surface followed by a condensation reaction with carboxylic acid functionalised SWCNTs. This new nanostructure has been characterised by X-ray photoelectron, Raman and Fourier transform infrared (FTIR) spectroscopy as well as scanning electron and atomic force microscopy. The assembly behaviour of SWCNTs onto the silicon surface shows a fast initial step producing isolated functionalised carbon nanotubes or nanotube bundles anchored to the silicon surface followed by a slower step where the adsorbed nanotubes grow into larger aggregates via van der Waals interactions between adsorbed and solvated nanotubes. The electrochemical and optical properties of the SWCNTs directly attached to silicon have also been investigated. These new nanostructures are excellent electrochemical electrodes. They also fluoresce in the wavelength range 650-800 nm. The successful attachment of the SWCNTs directly to silicon provides a simple, new avenue for fabrication and development of silicon-based nanoelectronic, nano-optoelectronic and sensing devices. Compared to existing techniques, this new approach has several advantages including low operating temperature, low cost and the possibility of further modification.     

Enhanced Li Adsorption and Diffusion in Single‐Walled Silicon Nanotubes: An ab Initio Study

We report a first‐principles investigation of Li adsorption and diffusion in single‐walled Si nanotubes (SWSiNTs) of interest to Li‐ion battery anodes. We calculate Li insertion characteristics in SWSiNTs and compare them with the respective ones in carbon nanotubes (CNTs) and other silicon nanostructures. From our calculations, SWSiNTs show higher reactivity toward the adsorption of Li adatoms than CNTs and Si nanoclusters. Considering the importance of Li kinetics, we demonstrate that the interior of SWSiNTs may serve as a fast Li diffusion channel. The important advantage of SWSiNTs over their carbon analogues is a sevenfold reduction in the energy barrier for the penetration of the Li atoms into the nanotube interior through the sidewalls. This prepossesses easier Li diffusion inside the tube and subsequent utilization of the interior sites, which enhances Li storage capacity of the system. The improvements in both Li uptake and Li mobility over their analogues support the great potential of SWSiNTs as Li‐ion battery anodes.     

碳纳米管内N2吸附行为及等量吸附热的GCMC分子模拟研究

碳纳米管及石墨烯具有高比表面积、高化学稳定性以及高耐蚀性等优点,被认为是一种理想的吸附材料。分子模拟技术的发展和应用丰富了人们对吸附机理研究的方式,而简单气体吸附体系的吸附机理研究对吸附理论的发展有着重要的推动作用。本文以单壁碳纳米管（SWCNT）-N₂吸附体系为研究对象,首先通过透射扫描电镜和氮气吸/脱附测试对所选用碳纳米管的微观孔形貌及吸/脱附等温线进行了表征,然后根据对应孔径参数采用巨正则蒙特卡罗方法对该体系的吸附过程进行了分子模拟,并详细研究了碳纳米管孔径和温度对该体系吸附行为的影响。结果显示,SWCNT孔径越小,吸附能力则越强;孔半径为0.746nm的SWCNT的吸附体系发生凝聚相变的临界温度为66K。通过对等量吸附热进行计算发现,孔半径0.746、1.15、1.56和1.83 nm的SWCNT-N₂吸附体系对应的初始固-液等量吸附热分别为10.9、9.2、8.6和8.4 kJ/mol。67.5K时,孔半径1.56和1.83 nm的吸附体系的等量吸附热有热峰出现。     

Monte Carlo simulations of hydrogen adsorption in alkali-doped single-walled carbon nanotubes

Monte Carlo simulations and Widom's test particle insertion method have been used to calculate the solubility coefficients (S) and the adsorption equilibrium constants (K) in single-walled (10,10) armchair carbon nanotubes including single nanotubes, and nanotube bundles with various configurations with and without alkali dopants. The hydrogen adsorption isotherms at room temperature were predicted by following the Langmuir adsorption model using the calculated constants S and K. The simulation results were in good agreement with experimental data as well as the grand canonical Monte Carlo simulation results reported in the literature. The simulations of nanotube bundle configurations suggest that the gravimetric hydrogen adsorption increases with internanotube gap size. It may be attributed to favorable hydrogen-nanotube interactions outside the nanotubes. The effect of alkali doping on hydrogen adsorption was studied by incorporating K+ or Li+ ions into nanotube arrays using a Monte Carlo simulation. The results on hydrogen adsorption isotherms indicate hydrogen adsorption of 3.95 wt% for K-doping, and 4.21 wt% for Li-doping, in reasonable agreement with the experimental results obtained at 100 atm and room temperature.