有机硫化物用于自由基活性/可控聚合

综述了有机硫化物用于自由基活性聚合的研究进展，对其机理和活性特征进行了简要的讨论。有机硫化物用于自由基活性聚合的研究工作可以追溯到上个世纪80年代，N，N－二乙基二硫代氨基甲酸酯用作光引发一转移－终止剂（Iniferter)，其聚合具有一定的活性特征，但分子量分布较宽，以二硫代羰酸酯和三硫代碳酸酯为链转移剂的可逆加成裂解链转移（RAFT）自由基聚合的发现，在活性自由基聚合领域是一个重要突破，用二硫代羰酸和三硫代碳酸酯作转移剂，在60Co γ-射线辐照下实现了St,AA,MA和MMA等单体的活性自由基聚合，是硫化物用于自由基活性聚合的又一新的进展。     

原子转移自由基聚合在分子结构设计中的应用进展

原子转移自由基聚合(ATRP)是一种新型"活性"/可控聚合技术,可有效地实现对聚合物分子结构的设计,精准地控制聚合物分子结构。本文在介绍了官能团反应法、偶联反应法以及自由基聚合法制备ATRP大分子引发剂的基础上,进一步介绍了通过控制大分子引发剂"活性"点位置进行聚合物结构设计。同时还着重综述了大分子引发剂在嵌段聚合物、梳状聚合物、分子刷聚合物、树状及超支化聚合物和星形聚合物分子设计中的应用。     

用大分子引发剂法制备嵌段共聚物

主要介绍了用大分子引发剂法制备嵌段共聚物的方法。大分子引发剂是从已商品化的功能聚合物制得或用其它活性聚合方法合成。从单封端的端羟基聚合物、其它单官能团或双官能团聚合物以及双功能基团缩聚物制得大分子引发剂．然后用于原子转移自由基聚合(ATRP)、氮氧稳定自由基聚合以及可逆加成裂解链转移(RAFT)聚合等．可制得结构可控、分子量分布窄的嵌段共聚物。     

非线形嵌段共聚物的合成

主要介绍了非线形嵌段共聚物,如星型嵌段共聚物、杂臂星型共聚物、梳型聚合物等的合成方法,包括多官能团引发剂法、大分子引发剂法等。各种活性聚合方法,如阳离子开环聚合、原子转移自由基聚合(ATRP)和氮氧稳定自由基聚合等都可以用于合成非线形嵌段共聚物。     

机理转移法合成聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)两亲性嵌段共聚物

将活性负离子聚合与原子转移自由基聚合(ATRP)技术相结合,运用机理转移法制备了一种两亲性材料聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)(PB-b-PDMAEMA)嵌段共聚物.首先通过负离子聚合方法设计合成聚丁二烯,用环氧丙烷封端,2-溴异丁酰溴作酯化剂,合成具有活性端基溴的聚丁二烯大分子引发剂(PB-B r),再用其引发亲水性单体DMAEMA进行原子转移自由基聚合,聚合动力学证实了该聚合反应具有典型的活性/可控自由基聚合的特征.通过差示扫描量热法(DSC)研究嵌段共聚物的微相分离行为.制备的大分子引发剂及两亲性嵌段共聚物经凝胶色谱、红外和核磁表征证实了预定的结构.     

γ-射线辐射活性自由基聚合研究

本文对γ- 射线辐射条件下的活性自由基聚合反应研究及进展进行了综述。虽然γ- 射线辐射引发聚合反应通常是不可控的,但在有机硫化物,如二硫代羧酸酯或三硫代碳酸酯存在下,则成功地实现了可控/活性自由基聚合。聚合过程中聚合物分子量随单体转化率线性增长,不但可控,且分布窄,也可以用于合成嵌段共聚物。有机硫化物对聚合反应控制起着关键性作用,硫化物的结构对于γ- 射线辐射活性自由基聚合行为的影响显著。γ- 射线辐射聚合的突出优点是可在室温或更低的温度下实施,且不需要加入引发剂。在环硫化合物存在下,获得了环形聚合物;而且使热和光敏感的叠氮类单体实现了活性聚合。     

ATRP大分子引发剂的合成及应用

原子转移自由基聚合(ATRP)是一种新型的可控/活性聚合技术,现已广泛应用于聚合物分子结构设计、无机材料表面修饰、蛋白质检测以及生物大分子的分离和杀菌防污等.在此类反应过程中涉及的三大要素:单体、引发体系(引发剂、催化剂、配位剂)及反应介质,其中核心要素为ATRP引发剂,其结构与性质是ATRP反应成败的决定因素之一.本文在综述了小分子引发剂的种类与性质及ATRP的反应机理的基础上,着重综述了近年来官能团反应法、偶联反应法及自由基聚合法制备ATRP大分子引发剂的最新进展.同时还综述了大分子引发剂通过ATRP反应在聚合物结构设计中的应用,以及对无机材料和生物材料的表面修饰的最新进展,最后对ATRP引发体系的未来发展与应用进行了展望.     

以双硫酯为链转移剂的活性自由基聚合

合成并研究了两种双硫酯链转移剂的纯化方法 ,进行了多种单体以双硫酯为链转移剂的活性自由基聚合及嵌段共聚 .发现以PhC(S)SC(CH3) 2 Ph为链转移剂的效果比PhC(S)SCH(CH3)Ph好 ,聚合产物的多分散性系数较小 .引发剂与链转移剂的摩尔数比为 1∶3 5～ 1∶4 2时 ,得到多分散性系数小 ,实测分子量与理论分子量相近的聚合产物 .聚合物的分子量随时间和转化率的增加而增加 ,加入第二单体形成嵌段共聚物 ,具有活性聚合特征 .聚甲基丙烯酸酯大分子引发剂引发丙烯酸酯单体聚合时 ,聚合速度最快 .     

原子转移自由基聚合合成（甲基）丙烯酸酯类模型聚合物及其动力学…

本文采用一种新颖的活性自由基聚合－原子转移自由基聚合的方法，以１－溴代苯乙烯作为引发剂，过渡金属卤代物与配位剂络合物为催化体系，环己酮为溶剂，进行了甲基丙烯酸正丁酯和丙烯酸正丁酯的活性聚合。得到具有指定分子量和窄分子量分布的模型聚合物。计算并讨论了两聚合体系的ＡＴＲＰ的动力学数据。     

一种新型单体引发转移终止剂合成精细结构功能化的聚苯乙烯

自从1982年Ｏｔｓｕ[1]等提出引发转移终止剂(Ｉｎｉｆｅｒｔｅｒ)以来,这类化合物得到了广泛的研究和发展.使用引发转移终止剂的聚合反应是实现“活性”聚合的一个重要方法.引发转移终止剂又分为热引发转移终止剂和光引发转移终止剂两种.热引发转移终止剂除了三苯甲基偶氮苯外[2],均是六取代乙烷类化合物[3～7];而光引发转移终止剂则一般是一些含二硫代氨基甲酰氧基基团的化合物,如Ｎ,Ｎ二乙基二硫代氨基甲酸苄酯(ＢＤＣ)、双(Ｎ,Ｎ二乙基二硫代氨基甲酸)对苯二甲酯(ＸＤＣ)、Ｎ乙基二硫代氨基甲酸苄酯(ＢＥＤＣ)、双(Ｎ乙基二硫代氨基甲酸…     

新型引发转移终止剂引发烯类单体活性自由基聚合及共聚合

引发转移终止剂 (Iniferter)是最早实现活性自由基聚合的方法 ,尽管它对聚合过程控制得不是很好 ,但是可聚合单体多 ,能方便地制备接枝和嵌段共聚物 .因此 ,近 2 0年来 ,它一直是高分子合成化学领域的一个研究热点 ,许多新颖结构的引发转移终止剂被合成并用于制备端基功能化聚合物、遥爪聚合物、大分子单体以及接枝和嵌段聚合物等 .本文扼要综述了引发转移终止剂的发展 ,着重综述了我们研究组在C—C键型高活性热引发转移终止剂、新的光引发转移终止剂、可聚合光引发转移终止剂、新型多功能引发转移终止剂和大分子光引发转移终止剂 5个方面的研究进展     

引发转移终止剂技术合成含有聚异戊二烯链段的三嵌段共聚物

含聚异戊二烯 (ＰＩＰ)链段的嵌段共聚物有着广泛的应用[1～ 3 ] ,有关它的合成、性能表征及应用方面的研究一直是学术及工业界的研究热点 .传统上 ,含有ＰＩＰ链段的嵌段共聚物用活性负离子聚合的方法来合成 ,例如 :聚苯乙烯 聚异戊二烯嵌段共聚物[3 ,4 ] .这是由聚合物增长链端的特殊活性所决定的 ,采用活性负离子聚合方法 ,不但能很好地控制共聚物的分子量和分子量分布 ,而且能控制共聚物中各组分的比例 .但是 ,负离子聚合通常需在较苛刻的条件下进行 ,如低温高真空、高纯度的单体和溶剂 ,而且能用于负离子聚合的单体也有限 .相对而言 ,…     

Catenated PS–PMMA Block Copolymers via Supramolecularly Templated ATRP Initiator Approach

A novel route to synthesize catenated macrocyclic PS–PMMA block copolymers is demonstrated via combination of supramolecular chemistry and controlled radical polymerization (CRP). Polymerization of styrene with bromopropionate ester initiator coupled with phenanthroline Cu(I) complex affords a four arm PS macroinitiator, which upon further chain extension by polymerization of MMA generates a four arm PS–PMMA block copolymer. Intramolecular coupling of PS–PMMA–Br arms via low temperature styrene‐assisted atom transfer radical coupling (ATRC) leads to the formation of PS–PMMA catenand, which generates the metal‐free catenated macrocyclic PS–PMMA block copolymer after removal of Cu metal. The interlocked structures of catenated block copolymers are confirmed by GPC, NMR, and AFM image analysis.     

Synthesis of well‐defined multigraft copolymers by a two‐step living radical polymerization with nitroxyl‐functionalized poly(methyl methacrylate)

Novel multigraft copolymers of poly(methyl methacrylate‐graft‐polystyrene) (PMMA‐g‐PS) in which the number of graft PS side chains was varied were prepared by a subsequent two‐step living radical copolymerization approach. A polymerizable 4‐vinylbezenyl 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) monomer (STEMPO), which functioned as both a monomer and a radical trapper, was placed in a low‐temperature atom transfer radical polymerization (60°C) process of methyl methacrylate with ethyl 2‐bromopronionate (EPNBr) as an initiator to gain ethyl pronionate‐capped prepolymers with TEMPO moieties, PMMA‐STEMPOs. The number of TEMPO moieties grafted on the PMMA backbone could be designed by varying STEMPO/EPNBr, for example, the ratios of 1/2, 2/3, or 3/4 gained one, two, or three graft TEMPO moieties, respectively. The resulting prepolymers either as a macromolecular initiator or a trapper copolymerized with styrene in the control of stable free‐radical polymerization at an elevated temperature (120 °C), producing the corresponding multigraft copolymers, PMMA‐g‐PSs. The nitroxyl‐functionalized PMMA prepolymers produced a relatively high initiation efficiency (>0.8) as a result of the stereohindrance and slow diffusion of TEMPO moieties connected on the long PMMA backbone. The polymerization kinetics in two processes showed a living radical polymerization characteristic. The molecular structures of these prepolymers and graft copolymers were well characterized by combining Fourier transform infrared spectroscopy, gel permeation chromatography, chemical element analysis, and ¹H NMR. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1876–1884, 2002     

可聚合的光引发转移终止剂合成接枝共聚物

采用一种可聚合的光引发转移终止剂 ,2 N ,N 二乙基二硫代氨基甲酰氧基乙酸 β 甲基丙烯酰氧基乙酯 (MAEDCA) ,通过两种途径制备了含有聚甲基丙烯酸甲酯 (PMMA)和聚苯乙烯 (PSt)链段的接枝共聚物 .其一是将MAEDCA作为引发剂 ,在紫外光照射下引发MMA聚合 ,得到大分子单体 ,通过大分子单体与St的共聚合得到 .考察了所用大分子单体的分子量和浓度对共聚合的影响 .其二是将MAEDCA作为单体与MMA共聚得到侧链上含有N ,N 二乙基二硫代氨基甲酰氧基 (DC)基团的无规共聚物 ,P(MMA co MAEDCA) .在紫外光照射下 ,P(MMA co MAEDCA)作为大分子引发剂引发St聚合 ,得到P(MMA co MAEDCA) g PSt的共聚物 ,研究了接枝共聚合过程的活性自由基聚合特征     

Iniferter concept and living radical polymerization

Iniferters are initiators that induce radical polymerization that proceeds via initiation, propagation, primary radical termination, and transfer to initiator. Because bimolecular termination and other transfer reactions are negligible, these polymerizations are performed by the insertion of the monomer molecules into the iniferter bond, leading to polymers with two iniferter fragments at the chain ends. The use of well‐designed iniferters would give polymers or oligomers bearing controlled end groups. If the end groups of the polymers obtained by a suitable iniferter serve further as a polymeric iniferter, these polymerizations proceed by a living radical polymerization mechanism in a homogeneous system. In these cases, the iniferters (C S bond) are considered a dormant species of the initiating and propagating radicals. In this article, I describe the history, ideas, and some characteristics of iniferters and living radical polymerization with some iniferters that contain dithiocarbamate groups as photoiniferters and several compounds as thermal iniferters. From the viewpoint of controlled polymer synthesis, iniferters can be classified into several types: thermal or photoiniferters; monomeric, polymeric, or gel iniferters; monofunctional, difunctional, trifunctional, or polyfunctional iniferters; monomer or macromonomer iniferters; and so forth. These lead to the synthesis of various monofunctional, telechelic, block, graft, star, and crosslinked polymers. The relations between this work and other recent studies are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2121–2136, 2000     

Radical polymerization of methyl methacrylate with ethane-1,1,2-triyltribenzene as an initiator and ethane-1,1,2-triyltribenzene-end polymers as macroinitiators

An unsymmetrical triphenylethane, ethane-1,1,2-triyltribenzene (ETB), was successfully prepared from phenyl lithium, trans-1,2-diphenylethylene, and methanol. Characterization of the compound was performed by ¹H and ¹³C nuclear magnetic resonance spectroscopy (NMR). The polymerization of methyl methacrylate (MMA) was performed in the presence of ETB at 85 °C or higher. The free radicals obtained were characterized by ultra-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UPLC/Q-TOF MS). Gel permeation chromatography (GPC) traces of the average molecular weight of poly(MMA) (PMMA) showed a series of translations with increasing time. The average molecular weight of PMMA indicated narrow polydispersity, and a linear relationship was found between ln([M]₀/[M]) and polymerization time. These results indicated the “living” nature of the polymerization of MMA in the presence of ETB. The structure of ETB was also introduced to the end of polystyrene (PS), polyisoprene (PI), and polyisoprene-b-polystyrene (PIS) chains which were obtained by living anionic polymerization. Hence, they initiated radical polymerization of MMA as ETB-end-macroinitiators to obtain block copolymers. Thus, living anionic polymerization and this radical polymerization method were combined together to prepare block copolymers without the intermediate transformation step.     

One‐step synthesis of hyperbranched polyethylene macroinitiator and its block copolymers with methyl methacrylate or styrene via ATRP

Block copolymers of hyperbranched polyethylene (PE) and linear polystyrene (PS) or poly(methyl methacrylate) (PMMA) were synthesized via atom transfer radical polymerization (ATRP) with hyperbranched PE macroinitiators. The PE macroinitiators were synthesized through a “living” polymerization of ethylene catalyzed with a Pd‐diimine catalyst and end‐capped with 4‐chloromethyl styrene as a chain quenching agent in one step. The macroinitiator and block copolymer samples were characterized by gel permeation chromatography, ¹H and ¹³C NMR, and differential scanning calorimetry. The hyperbranched PE chains had narrow molecular weight distribution and contained a single terminal benzyl chloride per chain. Both hyperbranched PE and linear PS or PMMA blocks had well‐controlled molecular weights. Slow initiation was observed in ATRP because of steric effect of hyperbranched structures, resulting in slightly broad polydispersity index in the block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3024–3032, 2010     

自由基嵌段共聚合新进展

本文引用５０多篇文章，按引发方式不同从顺序引发剂，ｉｍｉｆｅｒｔｅｒ法，高分子引发剂法和自由基性聚合等几方面综述了自由基嵌段共聚合近１０年来的新进展。     

Heteroarm H‐shaped terpolymers through click reaction

Heteroarm H‐shaped terpolymers, (polystyrene)(poly(methyl methacrylate))‐ poly(tert‐butyl acrylate)‐(polystyrene)(poly(methyl methacrylate)), (PS)(PMMA)‐PtBA‐(PMMA)(PS), and, (PS)(PMMA)‐poly(ethylene glycol)(PEG)‐(PMMA)(PS), through click reaction strategy between PS‐PMMA copolymer (as side chains) with an alkyne functional group at the junction point and diazide end‐functionalized PtBA or PEG (as a main chain). PS‐PMMA with alkyne functional group was prepared by sequential living radical polymerizations such as the nitroxide mediated (NMP) and the metal mediated‐living radical polymerization (ATRP) routes. The obtained H‐shaped polymers were characterized by using ¹H‐NMR, GPC, DSC, and AFM measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1055–1065, 2007