Corrosion prevention of mild steel in acidic medium by 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid: Theoretical and experimental approach

The inhibition efficiency of 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid (PTCA) against mild steel (MS) corrosion was investigated in acidic solution by using quantum chemical calculations based on Density Functional Theory (DFT) method and electrochemical measurements. The electrochemical impedance spectroscopy (EIS), potentiodynamic, potential zero charge (pzc) analysis and electrochemical noise (EN) measurements at various concentrations (from 0.1 to 10 mM) and immersion times were utilized in experimental part. The surface analysis was achieved scanning electron microscope (SEM) and contact angle measurements in the absence and presence of 10 mM PTCA. According to DFT results, PTCA exhibited 3.737 eV band gap and 8.130 Debye dipole moment which were a signal of potentially convenient corrosion inhibitor properties. PTCA has a remarkable corrosion inhibition capability to mild steel, which inhibited both anodic and cathodic corrosion rates, relying on it's physically adsorption on the metal solution interface and protection ability was increased with increasing PTCA concentration. The obtained adsorption equilibrium constant was 11.11 × 10³ M^-1 and calculated standard free energy of adsorption was ?33.03 kJ mol^?1. The determined activation energy values were 55.58 kJ mol^?1 and 96.86 kJ mol^?1 in 0.5 M HCl in the absence and presence of 10 mM PTCA, respectively. PTCA demonstrated a strong inhibition efficiency of 98.3%, after 168 h immersion, according to the EIS results. As a consequently, we recommend that PTCA is a convenient inhibitor in 0.1 M HCl for mild steel protection against corrosion.     

Surface interaction and corrosion inhibition of carbon steel in sulfuric acid using Petroselinum crispum extract

With the aid of the mass loss (ML) method, and a few electrochemical techniques [potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS)], the inhibitory impact of Petroselinum crispum (PC) extract on C-steel corrosion in solutions of 1 M sulfuric acid was assessed. By employing Fourier-transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) techniques, the C-steel surface morphology was investigated. The data showed that the solution of plant extract can be effectively utilized to inhibit C-steel corrosion in solutions of 1 M sulfuric acid. The effectiveness of the extract was enhanced by the higher extract dose and rising temperature. The apparent activation energy and the enthalpy of the dissolution process were determined and discussed. The presence of PC decreases the double-layer capacity from 493.1 to 107.3 μF cm⁻² and raises the charge transfer resistance in a solution of 1 M sulfuric acid from 43.39 to 287.7 Ω cm². PC is a mixed-type inhibitor, as demonstrated by PDP tests. The PC extract demonstrated the highest productivity for the C-steel protection up to 90.2% at 300 ppm from the extract, according with the PDP technique. The attained data indicated that PC extract was adsorbed chemically (ΔG^o_ads > 40 kJ mol⁻¹) onto the surface of the C-steel following the Temkin isotherm. The results of numerous tests appear to agree.     

Electrochemical and computational studies of an expired vilazodone Drug as environmentally safe corrosion inhibitor for aluminum in chloride medium

Through using chemical and electrochemical methods, the theoretical and experimental investigation of the expired vilazodone drug's ability to prevent corrosion on aluminium (Al) in a corrosive medium of HCl (1 M) has been examined. Weighing tests (WL), electrochemical (impedance spectroscopy (EIS), potentiodynamic polarization (PDP)), atomic force microscopy (AFM), scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR) tests at 25 °C have all been used to investigate Vilazodone's capability to prevent corrosion of Al in 1 M HCl in the concentration in the range of 25–150 ppm. The corrosion inhibition effect of the investigate Vilazodone's against Al in acid environment was investigated weight loss and electrochemical methods. The highest % inhibition efficiency (%IE) was 95% resulted from weight loss technique at the highest concentration for inhibitor. According to the PDP data, this examined vilazodone function as a mixed-type inhibitor, impacting both the anodic and cathodic reactions. The inhibitors covered the active points of the metal surface, according to electrochemical impedance spectroscopy (EIS), to prevent corrosion. It was discovered that the inhibitor adsorption on the Al surface obeyed the Langmuir adsorption isothermal model. AFM, SEM, and FTIR surface examinations proved the inhibitor had a significant protective effect against Al dissolution in 1 M HCl. The outcomes from chemical and electrochemical methods are relatively consistent. Vilazodone acted as an effective corrosion inhibitor, according to all of the experimental data.     

4-phenyl-decahydro-1H-1,5-benzodiazepin-2-one as novel and effective corrosion inhibitor for carbon steel in 1 M HCl solution: A combined experimental and empirical studies

The heterocyclic system, namely 4-phenyl-decahydro-1H-1,5-benzodiazepin-2-one (POBZ) was inspected as a corrosion inhibitor of carbon steel (CS) in a 1 M HCl medium through electrochemical impedance spectroscopy (EIS), potentiodynamic polarization measurements (PDP), and scanning electron microscopy (SEM). The experimental data indicate that the inhibiting action augments with augmenting POBZ amount and reduces with augmenting temperature. The inhibiting action efficiency of 90.98% is obtained with 0.001 M at 303 K. The potentiodynamic polarization (PDP) results mentioned that the POBZ is of mixed type. The adsorption of POBZ on the CS followed Langmuir isotherm. SEM exams affirmed that the steel surface is smooth in presence of POBZ. In light of the calculations of density functional theory (DFT) and molecular dynamics simulation, the mechanism of POBZ inhibitory activity was addressed.     

Ficus carica extract as environmentally friendly inhibitor for the corrosion of L-80 carbon steel in 0.5 ​M ​H2SO4 media

We reported here, the corrosion inhibition of carbon steel (CS) in H₂SO₄ media by Ficus carica leaves extract as green sustainable inhibitor. This study was investigated using mass loss method (ML), potentiodynamic polarization (PDP), electrochemical frequency modulation (EFM) and electrochemical impedance spectroscopy (EIS). As well as the metal surface morphology was analyzed by Atomic Force Microscopy (AFM). In addition, the chemical characterization of green inhibitor is carried out by Fourier Transform Infrared (FTIR). EIS revealed that the Ficus carica extract formed a thin protective film on the metal surface and by using of 300 ​ppm of extract of Ficus carica allow reaches (92.7%) of corrosion inhibition efficiency (CIE). The PDP curves revealed that the Ficus carica extract act as a mixed-type inhibitor. It was demonstrated that %IE enhanced with rising the Ficus carica extract doses also increased with arises in temperature (95.7%). Kinetic parameters and thermodynamic adsorption of the system have also been measured and studied. The data obtained revealed that the adsorption of Ficus carica on metal surface followed the Temkin isotherm and according to the activation energy (Ea1) the Ficus carica extract acts by chemisorption process. The results from unlike measurements were in a well accord.     

Cupressus arizonica fruit essential oil: A novel green inhibitor for acid corrosion of carbon steel

Natural-based corrosion inhibitors have gained great research interest thanks to their low cost and higher performance. The Cupressus arizonica fruit essential oil (CAFEO) has a higher extraction yield than leaves; however, it has less antibacterial and antifungal activities. The three main components in the CAFEO were α-pinene (51.07%), myrcene (17.92%), and limonene (9.66%). Essential oils with a higher percentage of α-pinene were found to have outstanding corrosion inhibition properties. Therefore, herein, the CAFEO was investigated as a green corrosion inhibitor for carbon steel (CS) in 1.0 mol/L HCl using electrochemical, i.e., potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS), and scanning electron microscope (SEM) techniques. The experimental results revealed that CAFEO successfully inhibited the carbon steel corrosion in 1.0 mol/L HCl solution. Results from PDP indicated that the inhibitor had a mixed-type effect with a predominance cathodic character. EIS data showed that the charge transfer resistance of the CS electrode increased from 20.9 Ω cm² in blank solution to 294.5 Ω cm² in HCl solution inhibited with 0.5 g/L of CAFEO at 298 K, leading to a significant decrease in the double layer capacitance values and an inhibition efficiency (η%) of 93%. The high temperatures showed a negative effect on the corrosion inhibition efficiency of the tested inhibitor. At 323 K, the η% of CAFEO decreased to 77%. Besides, SEM images showed that the inhibitor formed a protective barrier against acid attack, preventing carbon steel from corrosion. Theoretical calculations by Density Functional Theory (DFT) were performed to investigate the reactivity of the three main components of CAFEO.     

Rosmarinus officinalis extract as eco-friendly corrosion inhibitor for copper in 1 M nitric acid solution: Experimental and theoretical studies

Rosmarinus officinalis extract (ROE) was studied chemically (mass loss, ML), electrochemically impedance spectrometry (EIS), and potentiodynamic polarization (PDP) as a corrosion inhibitor in 1 M nitric acid. According to ML, ROE is effective like a copper preservative in 1 M HNO₃ acid solution at R.T by improving inhibitor concentration up to 77 % at 300 ppm and 25 °C. A study was conducted regarding the effect of temperature on copper adsorption, as well as the calculation of adsorption coefficients. Results indicated that physisorption increases with temperature, indicating a decrease in inhibition efficiency (%IE). Langmuir's adsorption model was consistent with the adsorption mechanism. Using the PDP method, the inhibitor accumulated on the copper surface in mixed forms. Moreover, EIS revealed that the value of double-layer capacitance dropped with an increased dose of ROE, while the charge transfer resistance improved. A different approach was taken to the examination of surfaces. Both theoretical studies and practical results were calculated and compared to demonstrate that the results were valid.     

On the corrosion inhibition of iron in hydrochloric acid solutions,Part I: Electrochemical DC and AC studies

The inhibitive action of 4-methyl pyrazole (4MP) against the corrosion of iron (99.9999%) in solutions of hydrochloric acid has been studied using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). At inhibitor concentration range (10^?3–10^?2 M) in 1.0 M acid, the results showed that 4MP suppressed mainly the anodic processes of iron corrosion in 1.0 M HCl by adsorption on the iron surface according to Temkin adsorption isotherm. Both potentiodynamic and EIS measurements reveal that 4MP inhibits the iron corrosion in 1.0 M HCl and that the efficiency increases with increasing inhibitor concentration. Data obtained from EIS were analyzed to model the corrosion inhibition process through an equivalent circuit.     

Corrosion inhibition of mild steel by highly stable polydentate schiff base derived from 1,3- propanediamine in aqueous acidic solution

Recently, the hydrolysis of Schiff bases under experimental conditions gives suspicion for their corrosion inhibition performance. The current study employs a stable Schiff base namely, 2,2′-{propane-1,3-diylbis[azanylylidene (E) methanylylidene]}bis(6-methoxyphenol) (LPD) as corrosion inhibitor for mild steel (MS) in 1 M HCl solution. The presence of the characteristic peak of the imine group in UV-visible spectra was taken as an indicator for LPD stability in acidic media. The inhibition action was examined using electrochemical techniques including potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) besides gravimetric measurement. The inhibition efficiency reached 95.93 % for 0.75 mM LPD after 24 h of immersion at 25 °C. This high efficiency is owing to the presence of the characteristic imine group and other heteroatoms and π- electrons of the aromatic benzene rings. The mechanism of inhibition depends on adsorption phenomena on mild steel surface which obeys Langmuir isotherm model. The calculated values of adsorption equilibrium constant (K_ads), adsorption free energy ΔG_ads, adsorption enthalpy ΔH_ads and adsorption entropy ΔS_ads indicated spontaneous exothermic adsorption process of both physical and chemical nature. By rising temperature, the inhibition efficiency of LPD was decreased. The calculated activation energy was increased as the concentration of LPD increased. LPD was considered as a mixed-type inhibitor as indicated from PDP measurements. The obtained surface morphology and composition analysis using SEM/EDS, AFM and FTIR techniques ensures the high efficiency of LPD as corrosion inhibitor.     

Adsorption Behavior and Inhibition Corrosion Effect of Sodium Carboxymethyl Cellulose on Mild Steel in Acidic Medium

The effect of sodium carboxymethyl cellulose (Na-CMC) on the corrosion behavior of mild steel in 1.0 mol·L⁻¹ HCl solution has been investigated by using weight loss (WL) measurement, potentiodynamic polarization, linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS) methods. These results showed that the inhibition efficiency of Na-CMC increased with increasing the inhibitor concentration. Potentiodynamic polarization studies revealed that the Na-CMC was a mixed type inhibitor in 1.0 mol·L⁻¹ HCl. The adsorption of the inhibitor on mild steel surface has been found to obey the Langmuir isotherm. The effect of temperature on the corrosion behavior of mild steel in 1.0 mol·L⁻¹ HCl with addition of 0.04% of Na-CMC has been studied in the temperature range of 298–328 K. The associated apparent activation energy (E^*_a) of corrosion reaction has been determined. Scanning electron microscopy (SEM) has been applied to investigate the surface morphology of mild steel in the absence and presence of the inhibitor molecules.     

Gravimetric,electrochemical, and morphological studies of an isoxazole derivative as corrosion inhibitor for mild steel in 1M HCl

In present study, an isoxazole derivative, namely, (Z)-4-(4-hydroxy-3-methoxybenzylidene)-3-methylisoxazol-5(4H)-one referred here as (IOD) has been studied as an environment-friendly corrosion inhibitor for mild steel (MS) in acidic medium (1 M HCl). The present work was investigated by gravimetric, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), fourier-transform infrared (FT-IR) spectroscopy techniques. Atomic force microscopy (AFM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) confirmed the surface morphologies of the MS surface with and without IOD in the acid medium. The inhibition efficiency (I.E.) of IOD was increased by rising its concentration attaining maximum value (96.6%) at 300 ppm at 30 °C and decreases with increasing temperature from 30 °C to 60 °C. The adsorption of studied inhibitor followed Langmuir adsorption isotherm model. The PDP study revealed that the IOD acts as a mixed-type inhibitor with predominating anodic effect. The EIS study confirmed that increasing IOD concentration enhances the charge transfer resistance (R_ct) and then reduces the double layer capacitance (C_dl) owing to the development of a protective layer on the MS surface.     

Experimental and theoretical investigations of adsorption of fexofenadine at mild steel/hydrochloric acid interface as corrosion inhibitor

The present study examines the effect of fexofenadine, an antihistamine drug, on corrosion inhibition of mild steel in molar hydrochloric acid solution using different techniques under the influence of various experimental conditions. Results revealed that fexofenadine is an effective inhibitor and percent inhibition efficiency increased with its concentration; reaching a maximum value of 97% at a concentration of 3.0 × 10⁻⁴ M. Fourier-transform infrared spectroscopy (FTIR) observations of steel surface confirmed the protective role of the studied drug. Polarization studies showed that fexofenadine is a mixed-type inhibitor. The adsorption of the inhibitor on mild steel surface obeyed the Langmuir adsorption isotherm with free energy of adsorption (∆G°_ads) of −40 kJ mol⁻¹. Energy gaps for the interactions between mild steel surface and fexofenadine molecule were found to be close to each other showing that fexofenadine has the capacity to behave as both electron donor and electron acceptor. The results obtained from the different corrosion evaluation techniques are in good agreement.     

Monitoring corrosion and corrosion control of low alloy ASTM A213 grade T22 boiler steel in HCl solutions

Rates of corrosion of low alloy ASTM A213 grade T22 boiler steel were monitored in aerated stagnant 0.50 M HCl solutions at different temperatures (283–303 K) using Tafel extrapolation method and the non-destructive electrochemical frequency modulation (EFM) technique, complemented with XPS examinations. Serine (Ser) was introduced as a corrosion-safe inhibitor. Corrosion rates (in μm y^?1) obtained from these two methods was in good agreement. Tafel plots showed that Ser acted mainly as a cathodic-type inhibitor. The inhibition process was attributed to the formation of an adsorbed film on the metal surface that protects the metal against corrosive agents. XPS examinations of the electrode surface confirmed the existence of such adsorbed film. The inhibition efficiency increased with increase in Ser concentration, while it decreased with temperature, suggesting physical adsorption. Activation energies have been calculated in the absence and presence of various concentrations of Ser by measuring the temperature dependence of the corrosion rate obtained from the two methods employed. It was found that the activation energy in the presence of Ser is higher than that in bare HCl solution. The adsorptive behaviour of Ser followed Temkin-type isotherm. The standard free energy of adsorption was estimated to be ?25 kJ mol^?1 at 303 K. These results confirmed the occurrence of physical adsorption.     

Evaluation of CO2 adsorption capacity of solid sorbents

The CO₂ adsorption capacity of the low-cost solid sorbents of waste tire char (TC) and chicken waste char (CW) was compared with commercial active carbon (AC) and 5 ? zeolite (ZA) using thermogravimetric analysis (TG), pressurized TG, and differential scanning calorimetry (DSC). The sorbents were degassed in a TG up to 150 °C to release all gases on the surface of the sample, then cooled down to the designed temperature for adsorption. TG results indicated that the CO₂ adsorption capacity of TC was higher than that of CW, but lower than those of AC and ZA. The maximum adsorption rate of TC at 50 °C was 0.61% min⁻¹, lower than that of AC, but higher than that of CW, 0.44% min⁻¹. The maximum adsorption rate of ZA at 50 °C was 3.1% min⁻¹. When the pressure was over 4 bar, the adsorption rate of ZA was lower than that of TC and AC. At 30 bar, the total CO₂ uptake of TC was 20 wt%, higher than that of CW and ZA but lower than that of AC. The temperature, nitrogen concentration, and water content also influenced the CO₂ adsorption capacity of sorbents to some extent. DSC results showed that adsorption was an exothermic process. The heat of CO₂ adsorption per mole of CO₂ of TC at 50 °C was 24 kJ mol⁻¹ while the ZA had the largest heat of adsorption at 38 kJ mol⁻¹. Comparing the characteristics of TC and CW, TC may be a promising sorbent for removal of CO₂.     

Production of low sulfur diesel fuel via adsorption: an equilibrium and kinetic study on the adsorption of dibenzothiophene onto NaY zeolite

The adsorption of dibenzothiophene (DBT) in hexadecane onto NaY zeolite has been studied by performing equilibrium and kinetic adsorption experiments. The influence of several variables such as contact time, initial concentration of DBT and temperature on the adsorption has been investigated. The results show that the isothermal equilibrium can be represented by the Langmuir equation. The maximum adsorption capacity at different temperatures and the corresponding Langmuir constant (K _L ) have been deduced. The thermodynamic parameters (ΔG ⁰,ΔH ⁰,ΔS ⁰) for the adsorption of DBT have also been calculated from the temperature dependence of K _L using the van’t Hoff equation. The value of ΔH ⁰,ΔS ⁰ are found to be −30.3 kJ mol⁻¹ and −33.2 J mol⁻¹ K⁻¹ respectively. The adsorption is spontaneous and exothermic. The kinetics for the adsorption process can be described by either the Langmuir model or a pseudo-second-order model. It is found that the adsorption capacity and the initial rate of adsorption are dependent on contact time, temperature and the initial DBT concentration. The low apparent activation energy (12.4 kJ mol⁻¹) indicates that adsorption has a low potential barrier suggesting a mass transfer controlled process. In addition, the competitive adsorption between DBT, naphthalene and quinoline on NaY was also investigated.     

An investigation of carbon steel corrosion inhibition in hydrochloric acid medium by an environmentally friendly green inhibitor

The inhibition effect of polyphenols extracted from olive mill wastewater (PP) on carbon steel in 1.0 M HCl solution was studied. Inhibition efficiency of PP was carried out by using chemical (weight loss method) and electrochemical techniques [potentiodynamic polarization and electrochemical impedance spectroscopy (EIS)]. The effect of temperature and immersion time on the corrosion behavior of carbon steel in 1.0 M HCl with addition of an extract was also studied. The results show that PP acts as a very good inhibitor, and the inhibition efficiency increases with the concentration of PP and decreases with rising temperature. Polarization curves show that PP behaves as a mixed-type inhibitor in hydrochloric acid. Data, obtained from EIS measurements, were analyzed to model the corrosion inhibition process through an appropriate equivalent circuit model; a constant phase element has been used. EIS shows that charge-transfer resistance increases and the capacitance of double layer decreases with the inhibitor concentration, confirming the adsorption process mechanism. The activation energy as well as other thermodynamic parameters for the inhibition process were calculated. The adsorption of PP obeys the Langmuir adsorption isotherm.     

Corrosion inhibition of steel in molar HCl by triphenyltin2–thiophene carboxylate

The effect of triphenyltin2–thiophene carboxylate (TTC) on the corrosion of steel in hydrochloric acid medium was studied using gravimetric, electrochemical polarisation and electrochemical impedance spectroscopy (EIS) measurements. The percentage inhibition efficiency was found to increase with increasing concentration of inhibitor to reach 97% at 10^?3 M. Polarisation study shows that TTC is an efficient inhibitor and acts as a mixed-type inhibitor. EIS results indicate the increase of resistance transfer (R_T) and the decrease of double layer capacitance (C_dl) with TTC concentration. Triphenyltin2–thiophene carboxylate molecules lead to the formation of a protective layer on the surface of steel. The inhibitor is adsorbed on the steel surface according to Langmuir isotherm.     

Experimental and Theoretical Studies on Extract of Date Palm Seed as a Green Anti-Corrosion Agent in Hydrochloric Acid Solution

Extracts from plant materials have great potential as alternatives to inorganic corrosion inhibitors, which typically have harmful consequences. Experimental and theoretical methodologies studied the effectiveness of agricultural waste, namely, date palm seed extract as a green anti-corrosive agent in 0.5 M hydrochloric acid. Experimental results showed that immersion time and temperature are closely related to the effectivity of date palm seed as a corrosion inhibitor. The inhibition efficiency reduced from 95% to 91% at 1400 ppm when the immersion time was increased from 72 h to 168 h. The experimental results also indicated that the inhibition efficiency decreased as the temperature increased. The presence of a protective layer of organic matter was corroborated by scanning electron microscopy. The adsorption studies indicated that date palm seed obeyed Langmuir adsorption isotherm on the carbon steel surface, and Gibbs free energy values were in the range of −33.45 to −38.41 kJ·mol⁻¹. These results suggested that the date palm seed molecules interacted with the carbon steel surface through mixture adsorption. Theoretical calculations using density functional theory showed that the capability to donate and accept electrons between the alloy surface and the date palm seed inhibitor molecules is critical for adsorption effectiveness. The HOMO and LUMO result indicated that the carboxyl (COOH) group and C=C bond were the most active sites for the electron donation-acceptance type of interaction and most auxiliary to the adsorption process over the Fe surface.     

Optimization and mass transfer simulation of remazol brilliant blue R dye adsorption onto meranti wood based activated carbon

Remazol brilliant blue R dye (RBBR) brings toxicity to living organisms once it enters the environment. This study utilized response surface methodology (RSM) and Polymath software for optimization and mass transfer simulation purposes, respectively. RSM revealed that the optimum preparation conditions of meranti wood-based activated carbon (MWAC) were 441 W, 5.76 min, and 1.35 g/g for radiation power, radiation time, and KOH:char impregnation ratio (IR), respectively, which translated into 86.39 mg/g of RBBR uptakes and 31.94 % of MWAC’s yield. The simulation study predicted the mass transfer rate, r_m to be 112.20 to 1007.50 s^?1 and the adsorption rate, k₁ to be 3.96 to 4.34 h^?1. The developed model predicted the adsorption surface area, a_m to be 790.04 m²/g and this value is highly accurate as compared to the actual mesopores surface area of 825.58 m²/g. Mechanism analysis divulged that the interaction that occurred between RBBR molecules and MWAC’s surface were hydrogen bond (methylene and alkyne), dipole–dipole force (alkyl carbonate, terminal alkyne, and methoxy), and ion–dipole force (primary amine). The isotherm and kinetic studies found that the adsorption data obeyed the Freundlich model and pseudo-first-order (PFO) model the best, respectively. The Langmuir maximum adsorption capacity, Q_m was computed to be 327.33 mg/g. Thermodynamic parameters were calculated to be ?4.06 kJ mol^?1, 0.06 kJ mol^?1 K^?1, –22.69 kJ mol^?1, and 16.03 kJ mol^?1 for ΔH°, ΔS°, ΔG°, and E_a, respectively, which signified the adsorption process studied was exothermic, spontaneous and governed by physisorption.     

Corrosion protection of carbon steel in acidic media by expired bupropion drug; experimental and theoretical study

The effects of expired bupropion on the corrosion protection of carbon steel in hydrochloric acid (1.0 M) and sulfuric acid (0.5 M) solutions were examined by Fourier transform infrared (FTIR) spectroscopy, Tafel polarization and electrochemical impedance spectroscopy (EIS). Bupropion concentrations in both acid solutions were raised, which improved corrosion prevention. Bupropion was a mixed inhibitor because it retarded the anodic and cathodic processes, as indicated by polarization data. The inhibition efficiency decreased with the increasing temperature from 25 to 55 °C. In the presence of bupropion, the activation energies of corrosion in both acid solutions increased. The thermodynamic quantities were deduced from the influence of temperature on the corrosion process of carbon steel in both acid media. Bupropion adsorption on carbon steel followed the Langmuir adsorption isotherm. The polarization data yielded outcomes consistent with the results arising from impedance measurements. FTIR spectroscopy showed the active sites of bupropion molecule during adsorption on the alloy surface. The theoretical study and molecular dynamics simulation of bupropion was done by a density functional theory (DFT) approach to realize the effects of molecular structure on the inhibitive action of bupropion.