Novel drug delivery systems based on the complexes of block ionomers and surfactants of opposite charge

In this paper we have evaluated a novel family of polymer-surfactant complexes formed between block ionomers and oppositely charged surfactants. Complexes between cationic copolymer poly(ethylene oxide)-g-polyethyleneimine (PEO-g-PEI) and sodium salt of oleic acid, natural nontoxic surfactant, are prepared and characterized. These systems self-assemble in aqueous solutions into particles with average size of 50–60 nm, which can solubilize hydrophobic dyes (Yellow OB) and drug molecules (paclitaxel). The use of the biologically active surfactants as components of block ionomer complexes is demonstrated for the complexes from PEO-g-PEI and all-trans-retinoic acid. Binding of relatively soluble drugs with block ionomers is illustrated using PEO-b-poly(sodium methacrylate) and doxorubicin. Overall these studies suggest that block ionomer complexes can be used to prepare a variety of soluble and stable formulations of biologically active compounds, and have potential application as drug delivery systems     

A triptycene-based approach to solubilising carbon nanotubes and C60

We describe herein the synthesis of a triptycene-based surfactant designed with the ability to solubilise single-walled carbon nanotubes (SWNTs) and C(60) in water through non-covalent interactions. Furthermore, an amphiphilic naphthalene-based surfactant with the same ability to solubilise SWNTs and C(60) has also been prepared. The compounds synthesised were designed with either two ionic or non-ionic tails to ensure a large number of supramolecular interactions with the solvent, thereby promoting strong solubilisation. The surfactants produced stable suspensions in which the SWNTs are dispersed and the surfactant/SWNT complexes formed are stable for more than one year. UV/Vis/NIR absorption spectroscopy, TEM and AFM were employed to probe the solubilisation properties of the dispersion of surfactants and SWNTs in water.     

Mixed micelle formation and solubilization behavior toward polycyclic aromatic hydrocarbons of binary and ternary cationic-nonionic surfactant mixtures

Water solubility enhancements of polycyclic aromatic hydrocarbons (PAHs), viz., naphthalene, anthracene and pyrene, by micellar solutions at 25 degrees C using two series of surfactants, each involving two cationic and one nonionic surfactant in their single as well as equimolar binary and ternary mixed states, were measured and compared. The first series was composed of three surfactants, benzylhexadecyldimethylammonium chloride (C16BzCl), hexadecyltrimethylammonium bromide (C16Br), and polyoxyethylene(20)mono-n-hexadecyl ether (Brij-58) with a 16-carbon (C16) hydrophobic chain; the second series consisted of dodecyltrimethylammonium bromide (C12Br), dodecylethyldimethylammonium bromide (C12EBr), and polyoxyethylene(4)mono-n-dodecyl ether (Brij-30) with a 12-carbon (C12) chain. Solubilization capacity has been quantified in terms of the molar solubilization ratio, the micelle-water partition coefficient, the first stepwise association constant between solubilizate monomer and vacant micelle, and the average number of solubilizate molecules per micelle, determined employing spectrophoto-, tensio-, and flourimetric techniques. Cationic surfactants exhibited lesser solubilization capacity than nonionics in each series of surfactants with higher efficiency in the C16 series compared to the C12 series. Increase in hydrophobicity of head groups of cationics by incorporation of ethyl or benzyl groups enhanced their solubilization capacity. The mixing effect of surfactants on mixed micelle formation and solubilization efficiency has been discussed in light of the regular solution approximation (RSA). Cationic-nonionic binary combinations showed better solubilization capacity than pure cationics, nonionics, or cationic-cationic mixtures, which, in general, showed increase with increased hydrophobicity of PAHs. Equimolar cationic-cationic-nonionic ternary surfactant systems showed lower solubilization efficiency than their binary cationic-nonionic counterparts but higher than cationic-cationic ones. In addition, use of RSA has been extended, with fair success, to predict partition coefficients of ternary surfactant systems using data of binary surfactants systems. Mixed surfactants may improve the performance of surfactant-enhanced remediation of soils and sediments by decreasing the applied surfactant level and thus remediation cost.     

The effect of NaOH on dodecyltrimethylammonium hydroxide aggregation in aqueous solutions

The aggregation of dodecyltrimethylammonium hydroxide (DTAOH) in aqueous NaOH solutions was studied as a function of NaOH concentration. As in NaOH-free DTAOH aqueous solutions, the surfactant underwent a stepwise aggregation mechanism. Changes in the structure of aggregates produced an increase of the concentration at which premicellar aggregates could solubilize hydrophobic dyes and also in the concentration at which hydroxide inons join the aggregates.     

Enhanced fluorescence of triphenylmethane dyes in aqueous surfactant solutions at supramicellar concentrations--effect of added electrolyte

The colour change of triphenylmethane (TPM) dyes induced by surfactants at concentrations much greater than their critical micellar concentrations is found to be accompanied by enhanced fluorescence. Thus, the otherwise weak fluorescence of TPM dyes can be detected using supramicellar surfactant concentrations. In this respect, the nonionic polyoxyethylene (POE) chain-containing surfactants are found to be more efficient compared with ionic surfactants. The POE surfactants, Triton X-100, Tween-20 and Tween-60 present a polymer-like surface to the dyes, which can thus easily bind to them. At supramicellar concentrations, the hydrophobic environment formed in these micelles is effective in preventing nonradiative relaxation processes of the dyes. As a result, there is enhanced fluorescence for even micromolar concentrations of the dyes. Among the Tween series, Tween-60 being more hydrophobic leads to greater fluorescence enhancement than Tween-20. From the fluorescence properties, binding constants for dye binding to the surfactants can be determined. Thus the relative efficiency of these surfactants as binding substrates can be assessed. Another interesting observation is that the electrolyte LiCl in presence of the surfactants leads to even larger fluorescence enhancement than the surfactants alone.     

Fluorinated ionic surfactant microemulsions in hydrofluorocarbon 134a (HFC 134a)

The factors influencing the formation of water-in-134a-propellant microemulsions using the fluorinated ionic surfactants ammonium perfluorooctanoate, ammonium perfluoroheptanoate, and sodium perfluorooctanoate has been determined. None of the fluorinated ionic surfactants could be used to prepare clear, one-phase systems when used as sole surfactant, but they could be when combined with a short-chain fluoro- or hydrocarbon alcohol in surfactant:cosurfactant weight-mixing ratios (K(m)) in the range 1:2 to 2:1. When hydrocarbon alcohols were used this clear region extended over a wide range of compositions and was confirmed by means of photon correlation spectroscopy (PCS) to contain microemulsion droplets in the propellant-rich part of the phase diagram. PCS studies performed in the presence of the water-soluble drug terbutaline sulfate showed that it was possible to solubilize the drug within water-in-propellant microemulsion droplets. These studies confirm for the first time that it is possible to prepare water-in-propellant 134a microemulsions using fluorinated ionic surfactants and to solubilize water-soluble drugs within these systems.     

A Triptycene‐Based Approach to Solubilising Carbon Nanotubes and C60

We describe herein the synthesis of a triptycene‐based surfactant designed with the ability to solubilise single‐walled carbon nanotubes (SWNTs) and C₆₀ in water through non‐covalent interactions. Furthermore, an amphiphilic naphthalene‐based surfactant with the same ability to solubilise SWNTs and C₆₀ has also been prepared. The compounds synthesised were designed with either two ionic or non‐ionic tails to ensure a large number of supramolecular interactions with the solvent, thereby promoting strong solubilisation. The surfactants produced stable suspensions in which the SWNTs are dispersed and the surfactant/SWNT complexes formed are stable for more than one year. UV/Vis/NIR absorption spectroscopy, TEM and AFM were employed to probe the solubilisation properties of the dispersion of surfactants and SWNTs in water.     

Interactions between nonpolar surfaces in mixed solutions of cationic and nonionic surfactants

The interaction energy between hydrophobic SiO₂ particles in aqueous solutions of a cationic surfactant (dodecylpyridinium bromide, DDPB), a nonionic surfactant (Triton X-100, TX-100), and their mixed solutions was measured as a function of concentration. Synergism has been observed in mixed surfactant solutions: the surfactant concentration required for achieving the set interaction energy in the mixed solutions was lower than in the solutions of the individual surfactants. The molecular interaction parameters in surfactant mixtures were calculated using the Rosen model. Chain-chain interactions between nonionic and cationic surfactants were suggested as the main reason for the synergism.     

Nature of cationic poly(propylenimine) dendrimers in aqueous solutions as studied using versatile indicator dyes

Aqueous solutions of four cationic poly(propylenimine) low-generation dendrimers of different architecture and hydrophobicity have been examined as media for acid-base reactions of indicator dyes. The cationic dendrimers in solution can be considered as oligomers of cationic polyelectrolytes, or surfactant-like species, able to form micelles through self-association or sometimes even as unimolecular micelles. The dendrimers influence the ionization constants, tautomeric equilibria, and absorption/emission/excitation spectra of indicator dyes. The p K a values of the majority of the indicator dyes decrease in dendrimer solutions, often by 1-2 p K a units, similar to effects registered in micellar solutions of cationic surfactants. Analogously, the shifts of absorption band maxima indicate that the microenvironments of the dyes bound to the dendrimers are less polar than in water. However, some spectral effects denote the specificity of the dendrimers. The greatest difference between the dendrimers and spherical surfactant micelles is revealed by kinetic processes, especially of bromophenol blue alkaline fading in a dendrimer solution but not in a micellar surfactant solution. Within the dendrimer series, the most significant differences were observed for substances possessing n-dodecyl tails on the one hand and those without such hydrophobic portions on the other. For the last-named, the decrease in p K a's of indicators, band shifts of their anions, and in particular displacement of tautomeric equilibria compared with aqueous solutions are much smaller than for more hydrophobic dendrimers.     

Co-solubilization of the Hydrophobic Drugs Carbamazepine and Nifedipine in Aqueous Nonionic Surfactant Media

Co-solubilization of the hydrophobic drugs Carbamezipine (CBZ) and Nifedipine (NFD) by micellar solutions at 25 °C, using two series of polyoxyethylene based nonionic surfactants, was measured and compared. The first series is composed of surfactants with a 12 carbon (C₁₂) hydrophobic chain while the second series had 16 carbon (C₁₆) hydrophobic chains. Experimental results were obtained for solubilization and co-solubilization of CBZ and NFD within the micelles at saturation and quantification was done in terms of the molar solubilization ratio and the micelle–water partition coefficient employing spectrophotometric and tensiometric techniques. The extent of micellar solubilization of CBZ is much greater than NFD. The C₁₂ series of surfactants exhibit higher solubilization capacities for CBZ than the C₁₆ series while the reverse is the case for NFD. Co-solubilization results showed competitive solubilization of the drugs. A synergistic effect on the solubilization of NFD was observed in the presence of CBZ in Brij30 and Brij56 surfactant systems while, in the remaining surfactants, the solubility of NFD was slightly reduced. Since the surfactants used in the present study are either nontoxic or have minimal toxicity, it is expected that they can be employed as drug delivery vehicles for co-administration of the two drugs in vivo. Both from industrial and research points of view, this paper reports a comprehensive study for co-solubilization of differently structured drugs in micellar media.     

Micellar enhancement of benzodiazepine fluorescence

The interactions that exist between benzodiazepines and surfactants provide micellar enhancement factors for their fluorimetric determination in the range 1.2-6.5, depending on the nature of both the benzodiazepine and the surfactant. A series of benzodiazepines and anionic surfactants were treated topologically to determine the influence of each benzodiazepine substituent on the basic benzodiazepine structure and the influence of both the hydrophobic moiety of the surfactant and its counter ion on the sensitisation process. Sensitisation parameters were used to quantify the effect of the chemical structures of both surfactants and drugs on their interaction.     

表面活性剂溶胀胶束：性能及应用

溶胀胶束是表面活性剂胶束增溶其它物质后使胶束膨胀的一种胶束状态,因其能显著提高难溶性物质的溶解度而备受关注。针对近年来对溶胀胶束的研究进展,综述了溶胀胶束的最大增溶量、增溶过程以及增溶后形貌尺寸的变化等问题,总结了影响胶束增溶作用的因素,厘清了溶胀胶束与微乳液的异同,介绍了溶胀胶束的应用,展望了其应用前景与发展方向。     

Thermally cleavable surfactants based on furan-maleimide Diels-Alder adducts

Two new surfactant molecules are reported that contain thermally labile Diels-Alder adducts connecting the hydrophilic and hydrophobic sections of each molecule. The two surfactants possess identical hydrophobic dodecyl tail segments but have phenol and carboxylic acid hydrophilic headgroups, respectively. Deprotonation with potassium hydroxide affords the formation of water-soluble surfactants. Room temperature aqueous solutions of both surfactants exhibit classical surface-active agent behavior similar to common analagous alkylaryl surfactant molecules. Critical micelle concentrations have been determined for each surfactant through dynamic surface tension and dye solubilization techniques. Small-angle neutron scattering measurements of the aqueous surfactant solutions indicate the presence of spherical micelles with radii of 16.5 angstroms for the carboxylate and 18.8 angstroms for the phenolate. When these surfactants are exposed to elevated temperatures (>50 degrees C), the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments. Aqueous solutions of each surfactant subsequently exhibit a loss of all surface-active behavior and the micellar aggregates are no longer detectable.     

Solubility of Nonsteroidal Anti-inflammatory Drugs (NSAIDs) in Aqueous Solutions of Non-ionic Surfactants

The solubilities of two nonsteroidal anti-inflammatory (MELOXICAM and CELECOXIB) drugs, were determined in aqueous solutions of nonionic (Tween 20, Tween 80, Brij 30, Brij 35, Triton X 100, Triton X 114) surfactants. These surfactants have different numbers of oxyethylene units and their micelles showed different aggregation numbers. It is shown that these surfactants have different abilities to solubilize NSAIDs drugs. The solubilities of the drugs increased linearly with the increase in concentration of surfactants. The sizes of micelles remained constant with the addition of the drugs, except for Triton type surfactants in which case the size of the micelles decreased. It was observed that the number of oxyethylene units in the surfactants, aggregation number of the micelles and HLB play key roles in solubilizing the drugs.     

Premicellar and micelle formation behavior of dye surfactant ion pairs in aqueous solutions: deprotonation of dye in ion pair micelles

The premicellar and micelle formation behavior of dye surfactant ion pairs in aqueous solutions monitored by surface tension and spectroscopic measurements has been described. The measurements have been made for three anionic sulfonephthalein dyes and cationic surfactants of different chain lengths, head groups, and counterions. The observations have been attributed to the formation of closely packed dye surfactant ion pairs which is similar to nonionic surfactants in very dilute concentrations of the surfactant. These ion pairs dominate in the monolayer at the air-water interface of the aqueous dye surfactant solutions below the CMC of the pure surfactant. It has been shown that the dye in the ion pair deprotonates on micelle formation by the ion pair surfactants at near CMC but submicellar surfactant concentrations. The results of an equilibrium study at varying pH agree with the model of deprotonated 1:1 dye-surfactant ion pair formation in the near CMC submicellar solutions. At concentrations above the CMC of the cationic surfactant the dye is solubilized in normal micelles and the monolayer at the air-water interface consists of the cationic surfactant alone even in the presence of the dyes.     

Effects of surfactants on the adsorptive removal of basic dyes from water using an organomineral sorbent-iron humate

The sorption of basic dyes (methylene blue, malachite green, rhodamine B, crystal violet) onto a nonconventional organomineral sorbent-iron humate-was examined in the presence of various kinds of surfactants. It was found that nonionic (Triton X-100) and cationic (cetyltrimethylammonium bromide) surfactants exhibited a relatively small effect on the dye sorption. Anionic surfactants (sodium dodecyl sulfate), on the other hand, affected (in most cases) dramatically the sorption of basic (cationic) dyes. Typically, the dye sorption was enhanced in the presence of low concentrations of anionic surfactants. At high surfactant concentrations, a steep decrease in the dye sorption was observed in some systems, probably due to the formation of micelles that solubilize the dye molecules and prevent their sorption. A model describing these experimental dependencies was proposed. The sorption of basic dyes onto iron humate may be described by the pseudo-second-order kinetic equation. Diffusion processes were identified as the main mechanisms controlling the rate of the dye sorption.     

Soluble complexes of sodium poly(isoprene-b-methacrylate) micelles with cationic surfactants in aqueous media

Water-soluble complexes between sodium poly(isoprene-b-methacrylate) (NaIMA) amphiphilic block copolymer micelles and two cationic surfactants with different hydrophobic tail lengths, namely, dodecyltrimethylammonium bromide (DTMAB) and octyltrimethylammonium bromide (OTMAB), were prepared by mixing individual aqueous solutions of block copolymers and surfactants. The complexes were characterized in terms of size, overall charge, and micropolarity by dynamic light scattering, zeta-potential measurements, and fluorescence spectroscopy. Properties of the systems were investigated as a function of surfactant concentration and surfactant type and state in the initial solutions, as well as temperature. Experiments reveal surfactant complexation at the coronal sodium poly(methacrylate) (NaMA) chains, followed by an increase in mass and a decrease in size of the micelles. Complexation of individual surfactant micelles was observed when the DTMAB concentration in the starting solutions was higher than the surfactant cmc. The complexes show a temperature dependence of their dimension due to the hydrophobic effect.     

Acid-base equilibrium of anionic dyes partially bound to micelles of nonionic surfactants

The acid-base equilibria of the sulfonephthalein dyes, namely, bromothymol blue, thymol blue, and cresol red, in aqueous nonionic micellar solutions of Triton X-100, Tween-20, Tween-40, Tween-60, and Tween-80 have been investigated. The equilibrium constants of the partition of the dyes between micellar and aqueous pseudophases have been determined spectrophotometrically at fixed pH. The K(ass) increased with the surfactants in the order Tween-80相似文献   

Adsorption of anionic dye by anionic surfactant modified chitosan beads: Influence of hydrophobic tail and ionic head-group

In this paper, how chitosan hydrogel beads were modified by anionic surfactants (SDS, SDOS, SDBS, AOT, and DTM-12) and then used for the adsorption and removal of an anionic dye (congo red) from aqueous solutions were described. The effect of surfactant concentration, surfactant ionic head-group, and surfactant hydrophobic tail were investigated in detail. The result revealed the modified CS beads all had the obviously higher adsorption capacity than CS beads. Compared to the ionic head-group, the hydrophobic tail of the surfactant plays more important role in the adsorption, and a high adsorption capacity was observed for CS/AOT beads and CS/DTM-12 beads (both with two hydrophobic tails). The Sips isotherm model showed a good fit with the equilibrium experimental data, and the values of the heterogeneity factor (n) indicated heterogeneous adsorption. The adsorption kinetics analysis indicated that the pseudo-second-order rate model could better describe the adsorption process than the pseudo-first-order rate model.     

Effects of common surfactants on protein digestion and matrix-assisted laser desorption/ionization mass spectrometric analysis of the digested peptides using two-layer sample preparation

While surfactants are commonly used in preparing protein samples, their presence in a protein sample can potentially affect the enzymatic digestion process and the subsequent analysis of the resulting peptides by mass spectrometry. The extent of the tolerance of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) to surfactant interference in peptide analysis is very much dependent on the matrix/sample preparation method. In this work the effects of four commonly used surfactants, namely n-octyl glucoside (OG), Triton X-100 (TX-100), 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate (CHAPS) and sodium dodecyl sulfate (SDS), for biological sample preparation on trypsin digestion and MALDI-MS of the resulting digest are examined in detail within the context of using a two-layer method for MALDI matrix/sample preparation. Non-ionic and mild surfactants, such as OG, TX-100 or CHAPS, are found to have no significant effect on trypsin digestion with surfactant concentrations up to 1%. However, TX-100 and CHAPS interfere with the subsequent peptide analysis by MALDI-MS and should be removed prior to peptide analysis. OG is an MS-friendly surfactant and no effect is observed for MALDI peptide analysis. The effect of SDS on trypsin digestion in terms of the number of peptides generated and the overall protein sequence coverage by these peptides is found to be protein dependent. The use of SDS to solubilize hydrophobic membrane proteins, followed by trypsin digestion in the presence of 0.1% SDS, results in a peptide mixture that can be analyzed directly by MALDI-MS. These peptides are shown to provide better sequence coverage compared with those obtained without the use of SDS in the case of bacteriorhodopsin, a very hydrophobic transmembrane protein. This work illustrates that MALDI-MS with the two-layer sample preparation method can be used for direct analysis of protein digests with no or minimum sample cleanup after proteins are digested in a solution containing surfactants.