4-phenyl-decahydro-1H-1,5-benzodiazepin-2-one as novel and effective corrosion inhibitor for carbon steel in 1 M HCl solution: A combined experimental and empirical studies

The heterocyclic system, namely 4-phenyl-decahydro-1H-1,5-benzodiazepin-2-one (POBZ) was inspected as a corrosion inhibitor of carbon steel (CS) in a 1 M HCl medium through electrochemical impedance spectroscopy (EIS), potentiodynamic polarization measurements (PDP), and scanning electron microscopy (SEM). The experimental data indicate that the inhibiting action augments with augmenting POBZ amount and reduces with augmenting temperature. The inhibiting action efficiency of 90.98% is obtained with 0.001 M at 303 K. The potentiodynamic polarization (PDP) results mentioned that the POBZ is of mixed type. The adsorption of POBZ on the CS followed Langmuir isotherm. SEM exams affirmed that the steel surface is smooth in presence of POBZ. In light of the calculations of density functional theory (DFT) and molecular dynamics simulation, the mechanism of POBZ inhibitory activity was addressed.     

Experimental and theoretical approach for novel imidazolium ionic liquids as Smart Corrosion inhibitors for mild steel in 1.0 M hydrochloric acid

3-(4-hydroxybutyl)-1-phenethyl-1H-imidazol-3-ium chloride ([HB-Imid] Cl), and 3-(2-chlorobenzyl)-1-phenethyl-1H-imidazol-3-ium chloride ([CB-Imid] Cl) were investigated as corrosion inhibitors for mild steel in 1.0 M hydrochloric acid solution. Electrochemical techniques (PDP and EIS) were performed as experimental studies while DFT at B3LYP 6-311G (df,pd), and molecular dynamic simulation were used as theoretical approach. PDP experiments revealed that the studied ionic liquids (ILs) behaved as mixture type inhibitors. EIS results indicated that these compounds showed good inhibition performance with inhibition efficiency around 95% at the optimum concentration of 1.0 × 10^?3 M. According to Langmuir isotherm model and the thermodynamic parameters, these ILs were adsorbed onto the mild steel surface through physical and chemical bonds. SEM and EDX examinations proved the formation of a protective layer of adsorbed inhibitors at the steel surface. The DFT/B3LYP/6-311G(df,pd) computations in both the gas and water environments disclosed that [HB-Imid] Cl molecule was softer and had a lower energy gap, electrodonating power, and polarizability indexes.     

Synthesis,X-ray structure and theoretical study of benzazole thioether and its zinc complex as corrosion inhibitors for steel in acidic medium

A ligand, 2-((benzo[d]thiazol-2-ylthio)methyl)-1H-benzo[d]imidazole, and its zinc complex have been synthesized. The structure of these compounds have been determined by spectroscopic techniques and single crystal X-ray diffraction. The corrosion inhibition study of these compounds for steel in 0.5 M H₂SO₄ medium has also been investigated using potentiodynamic polarization and EIS techniques. The quantum calculations were applied to investigate the relationship between the electronic properties and the corrosion inhibition efficiency of the two benzazoles derivatives. Surface analysis (XRF) indicated that the rust layer formed on the Cu-containing steels was enriched with Cu compounds. Polarization curves revealed that both inhibitors acted as a mixed-type inhibitor.     

The inhibition behavior of two pyrimidine-pyrazole derivatives against corrosion in hydrochloric solution: Experimental,surface analysis and in silico approach studies

Two pyrimidine-pyrazole derivatives have been investigated as corrosion inhibitors for mild steel in acidic medium using weight loss measurement, polarization curve and electrochemical impedance spectroscopy (EIS). The results obtained reveal that these compounds perform as corrosion inhibitors for mild steel in 1 M HCl. The values of inhibition efficiency calculated from three experimental techniques are reasonably in good agreement. The adsorption process of these compounds on surface of mild steel obeys to El Awady isotherm. Also, the adsorption process of inhibitors studied explaining by surface analysis (EDX). This work followed by in silico approach studies. Firstly, we used Marvinsketch.18 program in order to detect predominant form of inhibitors in electrolytic solution and then computed by Gaussian 09 based on the DFT method at B3LYP/6-31G (d,p).The results obtained theoretically are in good correlation with those obtained experimentally.     

Design,synthesis, and antilung adenocarcinoma activity research of novel paeonol Schiff base derivatives containing a 1,2,3-triazole moiety

A new series of paeonol Schiff base derivatives containing a 1,2,3-triazole moiety were synthesized using the copper(I) catalyzed azide-alkynecycloaddition (CuAAC) reaction and evaluated for their cytotoxicity in vitro against human cervical carcinoma HeLa cells, human lung cancer A549 cells, and human liver cancer HepG2 cells. Unfortunately, all the tested compounds showed poor activities toward the human cervical carcinoma HeLa cells and human liver cancer HepG2 cells. However, compounds (E)-2-(1-(((1-[2-fluorophenyl]-1H-1,2,3-triazol-4-yl)methyl)imino)ethyl)-5-methoxyphenol ( 4c ) and (E)-2-(1-(((1-[3- chlorophenyl]-1H-1,2,3-triazol-4-yl)methyl)imino)ethyl)-5-methoxyphenol ( 4i ) exhibited inhibitory activities toward human lung cancer A549 cells (IC₅₀ = 45.1 μM for 4c and 78.9 μM for 4i ) compared with that of paeonol, which indicated that such paeonol Schiff base derivatives containing a 1,2,3-triazole moiety could be further modified to obtain good cytotoxicity in vitro against human lung cancer A549 cells.     

Corrosion inhibition of mild steel by highly stable polydentate schiff base derived from 1,3- propanediamine in aqueous acidic solution

Recently, the hydrolysis of Schiff bases under experimental conditions gives suspicion for their corrosion inhibition performance. The current study employs a stable Schiff base namely, 2,2′-{propane-1,3-diylbis[azanylylidene (E) methanylylidene]}bis(6-methoxyphenol) (LPD) as corrosion inhibitor for mild steel (MS) in 1 M HCl solution. The presence of the characteristic peak of the imine group in UV-visible spectra was taken as an indicator for LPD stability in acidic media. The inhibition action was examined using electrochemical techniques including potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) besides gravimetric measurement. The inhibition efficiency reached 95.93 % for 0.75 mM LPD after 24 h of immersion at 25 °C. This high efficiency is owing to the presence of the characteristic imine group and other heteroatoms and π- electrons of the aromatic benzene rings. The mechanism of inhibition depends on adsorption phenomena on mild steel surface which obeys Langmuir isotherm model. The calculated values of adsorption equilibrium constant (K_ads), adsorption free energy ΔG_ads, adsorption enthalpy ΔH_ads and adsorption entropy ΔS_ads indicated spontaneous exothermic adsorption process of both physical and chemical nature. By rising temperature, the inhibition efficiency of LPD was decreased. The calculated activation energy was increased as the concentration of LPD increased. LPD was considered as a mixed-type inhibitor as indicated from PDP measurements. The obtained surface morphology and composition analysis using SEM/EDS, AFM and FTIR techniques ensures the high efficiency of LPD as corrosion inhibitor.     

Tetrazolo[1,5‐a]quinoline‐4‐carbaldehyde and its Schiff base on mild steel as corrosion inhibitor in 1 M HCl solution: electrochemistry,theoretical and SEM surface analysis

The corrosion inhibition impact of two quinoline derivatives, viz tetrazolo [1,5‐a] quinoline‐4‐carbaldehyde ( TQC ) and (Z) ?5‐methyl‐N‐(tetrazolo [1,5‐a] quinolin‐4‐ylmethylene) thiazol‐2‐amine ( MTQT ), has been examined against mild steel in 1 M HCl solution using conventional weight loss, potentiodynamic polarization, linear polarization, electrochemical impedance spectroscopy, quantum chemical, and scanning electron microscopic studies. The experimental results have showed that TQC and MTQT revealed a good corrosion inhibition and that the inhibition efficiency increases with the increase of concentration of inhibitor to attain 94.54% for TQC and 99.25% for MTQT at 25 ppm. Polarization measurements suggest that TQC and MTQT act as a mixed‐type inhibitor. A synergism between inhibitors can be observed by polarization measurements. Electrochemical impedance spectroscopy measurements show an increase of the transfer resistance with the inhibitor concentration. Adsorption of TQC and MTQT on the mild steel surfaces in 1 N HCl solution follows the Langmuir adsorption isotherm model. Furthermore, quantum chemical calculations have been conducted using B3LYP functional and 6‐31G(d,p) basis set to complement the experimental evidences. Copyright © 2015 John Wiley & Sons, Ltd.     

A combined computational & electrochemical exploration of the Ammi visnaga L. extract as a green corrosion inhibitor for carbon steel in HCl solution

Natural-based corrosion inhibitors have gained great research interest thanks to their low cost and higher performance. In this work, the chemical composition of the methanolic extract of Ammi visnaga umbels (AVU) was evaluated by gas chromatography (GC) coupled with mass spectrometry (MS) and applied for corrosion inhibition of carbon steel (CS) in 1.0 mol/L HCl using chemical and electrochemical techniques along with scanning electron microscope (SEM) and theoretical calculations. A total of 46 compounds were identified, representing 89.89% of the overall chemical composition of AVU extract, including Edulisin III (72.88%), Binapacryl (4.32%), Khellin (1.97%), and Visnagin (1.65%). Chemical (Weight loss) and electrochemical (potentiodynamic polarization curves (PPC), and electrochemical impedance spectroscopy (EIS)) techniques revealed that investigated extract can be used as an effective corrosion inhibitor for carbon steel in 1.0 mol/L HCl solution. At a low dose of 700 ppm, the inhibitory action of AVU extract reached an inhibition efficiency of 84 percent. According to polarization tests, the investigated extract worked as a mixed inhibitor, protecting cathodic and anodic corrosion reactions. The EIS test showed that upon the addition of AVU extract to HCl solution, the polarization resistance increased while the double layer decreased. SEM images showed a protected CS surface in the inhibited solution. Quantum chemical calculations by Density Functional Theory (DFT) for the main components confirmed the major role of heteroatoms and aromatic rings as adsorption sites. Molecular dynamics (MD) simulation was used to study the adsorption configuration of the main components on the Fe(1 1 0) surface. Outcomes from this study further confirmed the significant advantage of using plant-based corrosion inhibitors for protecting metals and alloys.     

Systematic Control of the Excited‐State Dynamics and Carrier‐Transport Properties of Functionalized Benzo[ghi]perylene and Coronene Derivatives

A series of benzo[ghi]perylene (Bp) and coronene (Cor) derivatives substituted with electron‐withdrawing methoxycarbonyl (COOMe) or electron‐donating methoxyl (MeO) groups was synthesized. The electrochemical, spectroscopic, and photophysical properties of these compounds were investigated by cyclic voltammetry, steady‐state and time‐resolved spectroscopy, and quantum‐yield measurements. Introduction of suitable substituents onto the aromatic rings enabled control of electrochemical and spectroscopic behavior. Examination of excited‐state dynamics revealed that fluorescence quantum yields increased with increasing number of COOMe groups in both Bp and Cor derivatives, consistent with the findings of DFT calculations. Single‐crystal analysis allowed the performance of field‐effect transistors containing single crystals of the derivatives to be rationalized.     

High fluorescent ethyl acrylate modified PEDOT‐MeNH2 with enhanced electrochromic performance

Two poly(2'‐aminomethyl‐3,4‐ethylenedioxythienylene) (PEDOT‐MeNH₂) derivatives were successfully synthesized by electrochemical polymerization of precursors, diethyl 3'‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl) methyl)azanediyl)dipropanoate ( monomer 1 ) and ethyl 3‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl) methyl)amino)propanoate ( monomer 2 ), respectively. Structure–property relationships of monomers and polymers, including electrochemical, optical properties, and morphology, were systematically explored. Significantly, the designed polymers exhibited red and orange emission signatures with high fluorescence quantum yields (Φ_F) of 0.044 and 0.045 compared with those of monomers; they may be used as building blocks for rational design of fluorescent materials. Moreover, cyclic voltammetry and spectroelectrochemistry studies demonstrated that poly(diethyl 3'‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl)azanediyl) dipropanoate) ( P1 ) and poly(ethyl 3‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl)amino) propanoate) ( P2 ) can be reversibly oxidized and reduced accompanied by obvious color changes from light purple to light blue for P1 , and from purple to blue for P2 . Furthermore, both P1 and P2 displayed higher optical contrasts (40–70%) in the visible region, favorable coloration efficiency (typically 50–230 cm² C^?1). From these results, the two polymers would be promising candidate materials for display applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2081–2091     

十八胺基分子组装体在碳钢表面的作用机理与模拟

应用分子动力学模拟明确了以β-环糊精(β-CyD)为主体、 十八胺(ODA)为客体的分子组装体(CDDA)的最优空间构型, 并采用动态失重、 电化学极化与阻抗测试结合扫描电子显微镜、 原子力显微镜、 接触角、 X射线光电子能谱(XPS)与衰减全反射红外光谱(ATR-FTIR)等表面分析手段, 研究了CDDA对Q235碳钢在蒸汽凝结水中的缓蚀机理. 结果显示, CDDA的4种构型可共存于组装体系内; 35 ℃下, 添加1 mmol/L CDDA对碳钢的缓蚀率达94.1%; 添加CDDA不改变腐蚀机理, 但可同时抑制电化学反应的阴、 阳极过程, 并显著提升极化阻抗, 属于阳极抑制为主的混合型缓蚀剂. XPS和ATR-FTIR结果均表明, CDDA在碳钢/溶液界面释放客体ODA, 并由其自发吸附组装形成疏水膜, 吸附过程符合Langmuir等温式. 分子动力学模拟与量子化学计算结果支持上述ODA释放并于金属表面组装成膜的推断.     

Theoretical study on alkaloid encapsulating via cyclopentano-cucurbit[n]uril (n = 8, 10)/graphene oxide heterojunction

Here, physical chemistry properties of the inclusion complexes of some alkaloids and cyclopentano-cucurbit[8, 10]urils (Cy-CB[8, 10]) were investigated via molecular dynamic (MD) simulations and density functional theory (DFT) calculations. The possibility of the heterojunction formation between cyclopentano-cucurbit[8, 10]urils and graphene oxide was investigated via MD simulation. Based on the results, an effective role of graphene oxide on the encapsulation complex formation, especially in the presence of codeine and morphine was confirmed. DFT (M06-2X) and DFT-D3 (M06-2X-D3) functionals were applied for geometry optimization of the complexes. To have an insight into the atomic level, different analyses, such as natural bond orbital and quantum theory of atoms in molecule analyses were applied and discussed. DFT results confirm that Cy-CB[8] makes a stronger interaction with alkaloids in comparison with Cy-CB[10]. Thermodynamic studies show that the complexation process of codeine inside Cy-CB[n] is more favorable than other complexes. Moreover, energy analysis showed that the van der Walls part plays an important role in alkaloid stabilization inside the Cy-CB[n] cavity.     

Anti-corrosive property of bioinspired environmental benign imidazole and isoxazoline heterocyclics: A cumulative studies of experimental and DFT methods

In the present study, four imidazoline (IDZ) and four isoxazolines (ISO) heterocyclics differing in the nature of methoxy (-OCH₃) and aromatic (phenyl and naphthyl) moieties are synthesized, characterized and evaluated as corrosion inhibitors for mild steel in acidic solution of 1 M HCl. Results showed that imidazoline based heterocyclic compounds are better corrosion inhibitors than isoxazoline based heterocyclics and both classes of compounds showed inhibition efficiency of more than 85% at 20 mgL⁻¹ concentration. Results further showed that inhibitors containing methoxy, phenyl, and naphthyl moieties showed higher protection efficiency as compared to the inhibitors without these moieties. PDP Study revealed that investigated IDZs and ISOs acted as mixed type inhibitors and their adsorption on the metallic surface followed the Langmuir adsorption isotherm model. All the experimental results were corroborated by density function theory (DFT) based quantum chemical calculations. Numerous DFT based indices calculated for neutral as well as protonated forms of the IDZs and ISOs in order to get better insight about metal-IDZs/ISOs interactions. Outcomes of the DFT analysis showed that protonated (cationic) form of the all the inhibitors are more strongly adsorbed on the metallic surface as compared to their neutral form.     

Oligomerization of higher olefins and alkylation of toluene catalyzed by 2-[hydroxy(diaryl)methyl]-8-hydroxyquinoline oxovanadium(v) complexes

Russian Chemical Bulletin - New oxovanadium(V) complexes with 2-[hydroxy(diaryl)methyl]-8-hydroxyquinoline ligands were synthesized. These compounds were found to be efficient tandem catalysts of...     

2-乙烯基硝基苯-8-羟基喹啉锌配合物的合成及紫外、荧光性质研究

设计合成了3种8-羟基喹啉衍生物配体:(E)-2-[2-(2-硝基苯基)乙烯基]-8-羟基喹啉(4a),(E)-2-[2-(3-硝基苯基)乙烯基]-8-羟基喹啉(4b),(E)-2-[2-(4-硝基苯基)乙烯基]-8-羟基喹啉(4c)及其相应的锌配合物5a～5c,产物经1H NMR,IR,MS和元素分析技术进行了结构表征.通过紫外滴定模拟了金属锌与配体的配位过程,分别测定了它们固态和溶液状态下的荧光性质:光谱显示化合物5a～5c固体荧光光谱的λmax分别是596,625,592 nm,在DMF溶液中的λmax分别是562,536,618 nm.荧光光谱显示硝基位置的改变可以调控8-羟基喹啉锌配合物的发光性质.     

Synthesis and photochemistry of binary and mixed ligand complexes of copper(II) containing 5-arylazo-8-hydroxyquinoline derivatives and alkyl xanthates

Summary Mixed ligand complexes of the type K[Cu(x-HQA)Rxan] [x-HQA = 5-arylazo-8-hydroxyquinoline derivatives; Rxan = methyl or ethylxanthate] have been prepared and characterised by elemental analysis, spectral measurements and conductivity. Upon irradiation, solutions of these complexes photoeliminate dinitrogen and a mechanism for this reaction is proposed. The photosensitivity of the oxine ligand was found to be responsible for the observed photolysis of the complexes.     

Spiropyrans and spirooxazines

The Duff formylation of 5-bromo- or 5-chloro-8-hydroxyquinoline leads to the corresponding 7-formyl derivatives, condensation of which with 2-methyleneindolines or 3H-indolium halides in the presence of a base afforded new photochromic 6′-halo-substituted spiro[indoline-2,2′-2H- pyrano[3,2-h]quinolines]. Thermal and photo-induced isomerization of compounds obtained have been investigated by 1H NMR and UV spectroscopy.     

Experimental and computational chemical studies on the corrosion inhibitive properties of metamizole sodium pharmaceutical drug compound for CS in hydrochloric acid solutions

The effect of sodium metamizole as a corrosion inhibitor for carbon steel (CS) in 1 M hydrochloric acid at various concentrations was studied by using chemical (weight loss, WL) and electrochemical [electrochemical frequency modulation (EFM), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP)] methods. The results of WL showed that the effectiveness of sodium metamizole as a CS preservative in a hydrochloric acid solution at room temperature raised by improvement of the concentration of the inhibitor and reached 82.87% at 300 ppm and 25 °C. The effect of temperature on the CS was studied and the thermodynamic parameters of activation and adsorption were computed and discussed. The results showed that the inhibition efficiency (IE) decreases with increasing temperature, suggestive of physisorption. This was collaborated by values of activation energy, which are all below 80 kJ mol^?1 and free energy which are below 20 kJ mol^?1. The adsorption mechanism was coherent with Langmuir adsorption model. Results of the PDP revealed that the inhibitor was adsorbed on CS surface by mixed type of behavior. Furthermore, EIS revealed the dip in the values of double-layer capacitance and improvement in the charge transfer resistance with increased dose of sodium metamizole. Surface examinations were performed using altered techniques. The theoretical studies were calculated to confirm the validity of the practical results and the results of both were compared with each other, demonstrating the validity of the results obtained.     

Synthesis,Crystal Structure and Spectroscopic Properties of 1,2-Benzothiazine Derivatives:An Experimental and DFT Study

1,2-Benzothiazine derivatives methyl 3-methoxy-4-oxo-3,4-dihydro-2H-benzo[e] [1,2]thiazine-3-carboxylate 1,1-dioxide(1) and methyl 2-ethyl-3-hydroxy-4-oxo-3,4-dihydro-2Hbenzo[e][1,2]thiazine-3-carboxylate 1,1-dioxide(2) were synthesized, and characterized by spectroscopic techniques; 1H-NMR and infrared(IR) spectroscopy. Crystals of 1 and 2 were grown by slow evaporation of methanol and ethyl acetate, respectively and their crystal structures were investigated by single-crystal X-ray diffraction analysis. Geometric properties were calculated by the B3 LYP method of density functional theory(DFT) at the 6-31G+(d) basis set to compare with the experimental data. Simulated properties were found in strong agreement with the experimental ones. Intermolecular forces have also been modeled in order to investigate the strength of packing and strong hydrogen bonding was observed in both compounds 1 and 2. Electronic properties such as Ionization Potential(IP), Electron Affinities(EA) and coefficients of the highest occupied molecular orbital(HOMO) and the lowest unoccupied molecular orbital(LUMO) of com- pounds 1 and 2 were simulated for the first time.     

Electrochemical and Quantum Chemical Studies of Azoles as Corrosion Inhibitors for Mild Steel in Hydrochloric Acid

The inhibition effect of three azole compounds, 2-aminobenzimidazole(ABM), 2-aminothiazole(AT) and 2-aminobenzothiazole(ABT), on the corrosion of mild steel in a 1 mol/L HCl solution was investigated by means of potentiodynamic polarization measurement, electrochemical impedance spectroscopy(EIS) and scanning electron mi-croscopy(SEM). The correlation between inhibition efficiency and molecular structure of inhibitor was theoretically studied via quantum chemical calculations. The results show that the inhibition efficiency(η) of the inhibitors follows the order of η_ABT >η_AT >η_ABM. Moreover, ABM, AT and ABT belong to mixed-type inhibitors. The adsorption of the inhibitors on the steel surface follows the Langmuir adsorption isotherm, with both physisorption and chemisorption.