A selective colorimetric chemosensor for thiols based on intramolecular charge transfer mechanism

Compound 1 as an electron donor-acceptor compound with N,N-dimethylaniline and quinone units was designed for a highly selective colorimetric determination of thiol-containing amino acids and peptides, by making use of the unique reactivity of thiol towards quinone. Compound 1 shows a strong intramolecular charge transfer (ICT) band around 582 nm; but, it decreased after addition of either cysteine (Cys) or glutathione (GSH). Moreover, the ICT band intensity at 582 nm decreased linearly with the increasing concentrations of Cys or GSH. The interference from other amino acids can be neglected. Therefore, compound 1 can be employed as a selective colorimetric visual chemosensor for thiol-containing amino acids and peptides.     

Metallomesogens derived from benzoxazoles-salicylaldimine conjugates

The synthesis, characterization, and mesomorphic properties of a new series of Schiff bases 2a-h and metal complexes 1a-h-M are prepared and their mesomorphic properties studied. Two single crystallographic structures of 2d (n=12, m=1) and 1g-Pd (n=m=12) were determined by X-ray analysis. Both compounds crystallize in a triclinic space group P−1. A dimeric structure formed by intermolecular H-bonds in 2d was observed, giving nematic phase due to a better aspect ratio. The central geometry at Pd²⁺ ion is nearly perfect square plane. All Schiff bases 2a-h formed N or/and SmC phases. The formation of mesophases of complexes 1a-h-M was strongly dependent on metal ions incorporated. All Cu²⁺, Ni²⁺ and Pd²⁺ complexes exhibited N or/and SmC phase, respectively. However, Zn²⁺ and Co²⁺ complexes were not mesogenic. The lack of mesomorphism was probably attributed to a preferred tetrahedral geometry at Zn²⁺ and Co²⁺ over a square-planar geometry at Cu²⁺ and Pd²⁺.     

Syntheses,crystal structures,and properties of Ni(II) and Co(III) complexes derived from tripod polypyridine ligands containing N7 or N6 donor set atoms

New complexes [Ni^II(pbpaen)](ClO₄)₂ (1) and [Co^III(pbpaen)](ClO₄)₃ (2) (pbpaen = N′-(pyridin-2-ylmethyl)-N,N-bis {2-[(pyridin-2-ylmethyl)amino]ethyl}ethane-1,2-diamine) have been synthesized and characterized by IR and UV–Vis spectroscopies. An X-ray structure of the nickel(II) complex shows that [Ni(pbpaen)](ClO₄)₂ (1) crystallizes in the monoclinic space group P2_1/c. The cation [Ni(pbpaen)]²⁺ is pseudo-octahedral with one of the three pyridyl nitrogen atom uncoordinated. The crystal lattice of this complex is stabilized by intra and intermolecular hydrogen bonding systems, giving one-dimensional sheets like arrays. All attempts to obtain nickel or cobalt complexes with protonated forms of the ligand resulted in isolation of only [Co^III(bpaen)](ClO₄)₃ (3) compound in which the tripod pbpaen ligand has lost one of the three pyridylmethyl groups, procuring then bpaen ligand {bpaen = N,N-bis{2-[(pyridin-2-ylmethyl)amino]ethyl}ethane-1,2-diamine}. The X-ray crystal structure reveals that the compound 3 crystallizes in the orthorhombic space group Pna2 with the Co³⁺ ion having a distorted-octahedral environment. These two ligands with strong-field N donor stabilise the +3 oxidation state of the Co center.     

Exploiting the deprotonation mechanism for the design of ratiometric and colorimetric Zn fluorescent chemosensor with a large red-shift in emission

The design, synthesis, and photophysical evaluation of a new naphthalimide-based fluorescent chemosensor, N-butyl-4-[di-(2-picolyl)amino]-5-(2-picolyl)amino-1,8-naphthalimide (1), were described for the detection of Zn²⁺ in aqueous acetonitrile solution at pH 7.0. Probe 1 showed absorption at 451 nm and a strong fluorescence emission at 537 nm (Φ_F=0.33). The capture of Zn²⁺ by the receptor resulted in the deprotonation of the secondary amine conjugated to 1,8-naphthalimide so that the electron-donating ability of the N atom would be greatly enhanced; thus probe 1 showed a 56 nm red-shift in absorption (507 nm) and fluorescence spectra (593 nm, Φ_F=0.14), respectively, from which one could sense Zn²⁺ ratiometrically and colorimetrically. The deprotonated complex, [(1-H)/Zn]⁺, was calculated at m/z 619.1800 and measured at m/z 618.9890. In contrast to these results, the emission of 1 was thoroughly quenched by Cu²⁺, Co²⁺, and Ni²⁺. The addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Mn²⁺, Al³⁺, Cd²⁺, Hg²⁺, Ag⁺, and Pb²⁺ produced a nominal change in the optical properties of 1 due to their low affinity to probe 1. This means that probe 1 has a very high fluorescent imaging selectivity to Zn²⁺ among metal ions.     

Zinc selective chemosensor based on pyridyl-amide fluorescence

Chemosensors are developed to image zinc ions. Fluorescence enhancement due to Zn²⁺ binding is an excellent way to detect its presence. A chemosensor for Zn²⁺ based on dipicolylamine (DPA) groups connected by a pyridyl amide backbone has been synthesized. Addition of 2-chloroacetyl chloride to 2,6-diaminopyridine affords 2,6-bis(chloroethylamido)pyridine, which is converted to the sensor BADPA-P by 2,2′-dipicolylamine displacement of chlorine. This compound along with two others, the mono-DPA, ADPA-P and the benzyl in place of pyridyl, BADPA-B, present three potential Zn²⁺ sensors. It was found that BADPA-P in the presence of Zn²⁺ shows a large increase in fluorescence, whether in polar organic or aqueous environments. Its fluorescence in the presence of Cd²⁺, unlike with Zn²⁺, is not enhanced when excited at longer wavelengths. Proton NMR measurements, indicate two Zn²⁺ ions bind to BADPA-P. Also, Zn²⁺ enhances fluorescence even when other metal ions are present.     

Heavy metal complexation by N-acyl(thio)urea-functionalized cavitands: synthesis, extraction and potentiometric studies

The synthesis and binding properties of resorcinarene-based cavitands functionalized with N-acylthiourea moieties towards different cations are described. Extraction studies with metal (Pb²⁺, Cu²⁺, Ag⁺, Hg²⁺, Cd²⁺, Eu³⁺, Fe³⁺, K⁺, Na⁺, and Ca²⁺) picrates and the incorporation in ion selective electrodes (ISEs), show that there is more than a 40% increase of the Ag⁺ extraction for N-acylthiourea ionophores (2, 3, and 8) in comparison with N-benzoyl-N′-benzylthiourea (9). Ionophore 8, which has a C₃ chain between the platform and the ionophore, extracts two times more Cu²⁺ than the more rigid one (2). Stoichiometry studies showed for ligand 2 a ligand/metal ratio of 1:1, while for model compound 9 a ratio of 1:2 was found. Potentiometric studies of electrodes revealed that cavitands 2, 3, and 8 induce a significantly different selectivity pattern compared to the cation-exchanger used, as well as model compound 9. Especially, a considerable enhancement of the selectivity towards Ag⁺ and Pb²⁺ over K⁺, Ca²⁺, and Na²⁺ ions was observed.     

Synthesis and characterization of metal complexes of N-alkyl-N-phenyl dithiocarbamates

Ammonium N-ethyl-N-phenyl dithiocarbamate (L¹) and N-butyl-N-phenyl dithiocarbamate (L²), and their group 12 metal complexes formulated as Zn₂L¹₄, CdL¹₂, HgL¹₂, Zn₂L²₄, CdL²₂, HgL²₂ have been synthesized and characterized by elemental analyses, IR, ¹H and ¹³C NMR spectroscopy. The crystal structures of the zinc complexes (Zn₂L¹₄ and Zn₂L²₄) are also reported. Single crystal analyses of the two complexes revealed the presence of distorted trigonal bipyramidal and tetrahedral coordination geometry about the metal ions. The dithiocarbamate acts as bidentate chelating and bidentate bridging ligands between the metal ions giving centrosymmetric dimeric molecules. The apparent substitution of the ethyl substituents in L¹ by the butyl groups in L² results in profound change in structure.     

Highly enantioselective fluorescent recognition of amino acid derivatives by unsymmetrical salan sensors

Novel unsymmetrical salan fluorescent sensors 2a and 2b have been designed and synthesized. The chiral recognition of N-Boc-protected amino acids by 2a and 2b has been investigated. Sensor 2a possesses higher sensitivity and enantioselectivity than sensor 2b does. Job analysis and nonlinear regression results show that 2a can form a 1:1 stoichiometric complex with a N-Boc-protected amino acid. The obtained response selectivities and the association constants indicate that 2a is a highly enantioselective and sensitive fluorescent sensor toward N-Boc-protected amino acids.     

A reversible fluorescent–colorimetric Schiff base sensor for Hg ion

A simple (R)-(−)-2-phenylglycinol functionalized Schiff base L1 and its characterization as a fluorescent–colorimetric sensor for Hg²⁺ ion are described. The UV–vis and fluorescence analysis in methanol and aqueous solution show complex formation between L1 and Hg²⁺ ion with a micromolar association constant. Competition experiments performed for the acetate salts of Hg²⁺, Zn²⁺, Co²⁺, Pb²⁺, Cd²⁺, Mn²⁺, Cu²⁺, Ni²⁺, and Ba²⁺ revealed that compound L1 exhibits high selectivity toward Hg²⁺ displaying a color change easily detectable by naked-eye and a turn-off fluorescent effect due to a chelation-enhanced quenching (CHEQ) mechanism. Moreover, addition of EDTA to L1–Hg²⁺ recovers the fluorescence and color offering receptor L1 as a reversible sensor for real-time applications.     

Synthesis,characterization and metal ion complexation and extraction capabilities of calix[4]arene Schiff base compounds

The syntheses, characterization and metal ion complexation and extraction capabilities of six new calix[4]arene Schiff base compounds, 5–10, are reported. The preparation of the compounds was achieved by the condensation of 5,17-diamino-11,23-di-tert-butyl-25,27-di-n-butoxy-26,28-dihydroxycalix[4]arene with the appropriate aldehyde (5-bromosalicylaldehyde for 5, 4-anisaldehyde for 6, 4-(dimethylamino)benzaldehyde for 7, 9-anthracenecarboxaldehyde for 8, 1-pyrenecarboxaldehyde for 9, and 9-fluorenecarboxaldehyde for 10) in refluxing ethanol. The compounds were characterized by ¹H and ¹³C NMR spectroscopy, IR spectroscopy, high-resolution mass spectrometry and elemental analysis. The X-ray crystal structures of 7, 8 and 9 (as dichloromethane solvates) revealed that the calixarene molecules adopt H-bond stabilized, distorted-cone conformations and form centrosymmetric dimers in the solid state. Compounds 5–10 did not form host–guest complexes with NEt₄[(bdt)MoO₂(OSiPh₃)] (bdt^2–=benzene-1,2-dithiolate), a potential precursor for biologically relevant oxosulfido-Mo(VI/V) enzyme models; such host–guest complexes have the potential to stabilize these sought-after but highly reactive model compounds. In addition, the capabilities of 5–10 to extract selected metal ions (Ni²⁺, Co²⁺, Cu²⁺, Zn²⁺, Ag⁺, Pb²⁺, Cd²⁺ and Hg²⁺) from an aqueous into an organic phase have been assessed by picrate extraction experiments. Compound 5 displayed exceptional selectivity towards Ni²⁺, compound 7 exhibited enhanced extraction towards all of the metal ions tested and compounds 6, 9 and 10 showed very high selectivity towards Hg²⁺. On the other hand, compound 8 exhibited negligible capacity to extract any of the metal ions tested.     

Simple imine linked colorimetric and fluorescent receptor for sensing Zn ions in aqueous medium based on inhibition of ESIPT mechanism

Herein, we report the highly selective binding of Zn²⁺ ion by the salicylaldimine based Schiff base chromogenic receptor 1 [(N,N′-bis (salicylidine)-o-phenylenediamine]. Receptor 1 senses Zn²⁺ ion in aqueous medium by colorimetric and fluorescent response in the presence of other metal ions like Pb²⁺, Hg²⁺, Sn²⁺, Cd²⁺. Receptor 1 on binding with Zn²⁺ ion exhibits fluorescence enhancement which is due to the inhibition of the (ESIPT) mechanism.     

Synthesis, characterization and electrochemical properties of two new calix[4]arene derivatives bearing two ferrocene imine or ferrocene amine units at the upper rim

A novel calix[4]arene derivative with two ferrocenyl Schiff-base groups at the upper rim 3 has been synthesized from 5,17-diformyl-25,27-dipropoxy-26,28-dihydroxy calix[4]arene and 4-ferrocenylaniline via condensation reaction. Reduction of 3 with sodium borohydride led to calix[4]arene derivative 4 with two amino ferrocenyl groups at the upper rim. The ferrocenyl Schiff-base calix[4]arene and its corresponding reduced amine have been purified and characterized by elemental analysis,¹H NMR, FTIR, Mass and UV-vis spectral data. Electrochemical properties of compounds 3 and 4 have been investigated. Cyclic voltammograms of 3 and 4 show reversible redox couples of ferrocene/ferrocinium at E_1/2=0.401 V and 0.346 V, respectively. Electrochemical studies show these redox active compounds electrochemically recognize trivalent lanthanides La³⁺ and Ce³⁺ and divalent Pb²⁺ and Cu²⁺cations. With ferrocenyl Schiff-base calix[4]arene 3 an anodic shift as large as 130 mV is observed on addition of one equivalent of Ce³⁺ ion. Also extraction properties of compound 4 towards some metal cations have been described. It has been observed that compound 4 has a good selectivity for metal cations Fe³⁺, Cu²⁺, Pb²⁺ and Cd²⁺ against Ni²⁺ and Co²⁺.     

Catenar bimetallomesogens derived from quinoxaline–salicylaldimine conjugates

The preparation, characterization, and mesomorphic properties of two series of tridentate N-salicylidene-2-hydroxyanilines and their metal complexes were described. The crystal and molecular structure of bis[2-hydroxy-4-propyloxy-N-(2-hydroxy-3,4-dipropyloxybenzylidene) aniline]copper(II) were determined by means of X-ray analysis. It crystallizes in the monoclinic space group P2(1)/n and a Z=4. The geometry at Cu²⁺ ions is square pyramidal with a THF solvent molecule coordinated. The core structure was nearly flat, and the intramolecular Cu–Cu atoms were separated by ca. 3.0163(6) Å. All compounds 2a formed smectic C phases, and copper complexes 1a–Cu were not mesogenic. In contrast, compound 2e and complexes 1b–Cu, 1d–Cu, 1e–Cu, and 1e–Pd exhibited columnar phases. The lack of mesomorphism in 1e–Zn was attributed to a preferred tetrahedral over square planar geometry. A N_cell equal to 2.44–2.92, calculated from powder XRD data within a 9.0 Å thick indicated that an induced structure correlated by two catenar-shaped molecules was formed in Col_h phases.     

Epoxy-based polymer bearing 1-naphthylamine units: highly selective fluorescent chemosensor for ferric ion

A simple epoxy-based polymer 1 bearing 1-naphthylamine units has been synthesized and its recognition behaviors toward various metal ions have been investigated in THF-water (8:2, v/v) solution. The designed polymer 1 was found to exhibit selective ON-OFF-type fluorosensing behavior toward Fe³⁺ ions over other representative metal ions such as Cu²⁺, Zn²⁺, Co²⁺, Ni²⁺, and Hg²⁺ ions.     

Three different fluorescent responses to transition metal ions using receptors based on 1,2-bis- and 1,2,4,5-tetrakis-(8-hydroxyquinolinoxymethyl)benzene

The dipod 1,2-bis(8-hydroxyquinolinoxymethyl)benzene (3) and tetrapod 1,2,4,5-tetrakis(8-hydroxyquinolinoxymethyl)benzene (5) have been synthesized through nucleophilic substitution of respective 1,2-bis(bromomethyl)benzene (2) and 1,2,4,5-tetra(bromomethyl)benzene (4) with 8-hydroxyquinoline (1). For comparison, 1,3,5-tris(8-hydroxyquinolinoxymethyl)benzene derivatives (7a and 7b) have been obtained. The complexation behavior of these podands towards Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ metal ions has been investigated in acetonitrile by fluorescence spectroscopy. The sterically crowded 1,2,4,5-tetrapod 5 displays unique fluorescence ‘ON-OFF-ON’ switching through fluorescence quenching (λ_max 395 nm, switch OFF) with <1.0 equiv of Ag⁺ and fluorescence enhancement (λ_max 495 nm, switch ON) with >3 equiv Ag⁺ and can be used for estimation of two different concentrations of Ag⁺ at two different wavelengths. The addition of Cu²⁺, Ni²⁺, and Co²⁺ metal ions to tetrapod 5 causes fluorescence quenching, i.e., ‘ON-OFF’ phenomena at λ_max 395 nm for <10 μM (1 equiv) of these ions but addition of Zn²⁺ and Cd²⁺ to tetrapod 5 results in fluorescence enhancement with a gradual shift of λ_em from 395 to 432 and 418 nm, respectively. Similarly, dipod 3 behaves as an ‘ON-OFF-ON’ switch with Ag⁺, an ‘ON-OFF’ switch with Cu²⁺, and an ‘OFF-ON’ switch with Zn²⁺. The placement of quinolinoxymethyl groups at the 1,3,5-positions of benzene ring in tripod 7a-b leads to simultaneous fluorescence quenching at λ_max 380 nm and enhancement at λ_max 490 nm with both Ag⁺ and Cu²⁺. This behavior is in parallel with 8-methoxyquinoline 8. The rationalization of these results in terms of metal ion coordination and protonation of podands shows that 1,2 placement of quinoline units in tetrapod 5 and dipod 3 causes three different fluorescent responses, i.e., ‘ON-OFF-ON’, ‘ON-OFF’, and ‘OFF-ON’ due to metal ion coordination of different transition metal ions and 1, 3, and 5 placement of three quinolines in tripod 7, the protonation of quinolines is preferred over metal ion coordination. In general, the greater number of quinoline units coordinated per metal ion in 5 compared with the other podands points to organization of the four quinoline moieties around metal ions in the case of 5.     

Synthesis and complexation properties of novel triazoyl-based ferrocenyl ligands

Two new ligand derivatives of ferrocene, namely N-4-[3,5-di-(2-pyridyl)-1,2,4-triazoyl]ferrocene carbimine (L1) and N-4-[3,5-di-(2-pyridyl)-1,2,4-triazoyl]ferrocene carbamide (L2), were synthesised in good yields by reacting the known compound 3,5-di-pyridine-2-yl-[1,2,4]triazol-4-ylamine (1) with ferrocenecarbaldehyde and chlorocarbonyl ferrocene, respectively. The structures of L1 and L2 were determined by X-ray crystallography. The complexation of L1 and L2 with Cu^I, Ag^I, Zn^II and Cd^II was studied by NMR and UV-vis spectroscopies, as well as by electrochemistry, with titrations used to determine metal:ligand stoichiometries. The cyclic voltammograms of L1 and L2 and their respective complexes indicated reversible one-electron transfers corresponding to the Fc^0/+ redox couple (Fc = ferrocene), with formal electrode potentials shifting to more positive values upon metal complexation.     

Synthesis of γ-fluoro-α-amino acids by Claisen rearrangement

A series of N-protected glycine and alanine esters 4-7 of different fluorinated allylic alcohols 1 was prepared using the dicyclohexylcarbodiimide/dimethylaminopyridine method. All fluorinated esters of this type failed to react in an esterenolate Claisen rearrangement under the general conditions of the Kazmaier variant of this rearrangement. Change of the solvent from tetrahydrofuran to the less coordinating diethyl ether enabled the rearrangement of N-Boc-protected glycine esters 4a-c of 2-fluoroalken-3-ols 1a-c to form N-Boc-2-amino-4-fluoroalk-4-enecarboxylic acids 8a-c, while the rearrangement failed with N-Boc-alanine esters and all amino acid esters of 2-fluoroallylic alcohol (1e). This might be due to competing deprotonation of the position β to fluorine. Similarly to the esters 4a-c, the TFA-protected glycine esters 5a-c of 2-fluoroalken-3-ols 1a-c were rearranged. Deprotection of the Boc or the TFA group under salt-free conditions yielded the free amino acids 11a-c, which might be seen as mimics for N-alkylasparagines a group of lipoproteins.     

Branched supramolecular polymers formed by bifunctional cyclodextrin derivatives

Branched supramolecular polymers have been prepared from the mixture of 3-cinnamamide-α-CD (1) and 3-N^α-cinnamamidehexancarbonyl-N^?-cinnamamide-lysinamide-α-CD (3) and from the mixture of 3-cinnamamidehexanamide-α-CD (2) and 3. Compounds 1 and 2 formed a linear supramolecular polymer, whereas compound 3 having two guest moieties formed a hyperbranched supramolecular polymer. Physical properties of these supramolecular polymers were studied by viscosity measurements in aqueous solutions. When compound 3 was added to the solution of compound 2, the η_sp/C value of the mixture of 2 and 3 was found to be much higher than that of compound 2. These results indicate that compound 3 functions as a branching moiety to increase the viscosity. Supramolecular polymers consisting of compound 2 or 3 did not show the viscosity increase, whereas the mixture of 2 and 3 gave highly viscous solutions and formed fibers from the concentrated aqueous solutions. It is caused by the branching of linear supramolecular polymers with compound 3 and hydrophobic and/or hydrogen bonding interactions between supramolecular polymers.     

Syntheses, structures and properties of a series of photochromic hybrids based on Keggin tungstophosphates

Three inorganic-organic hybrids based on Keggin tungstophosphates and lanthanides, [Pr(NMP)₆(PW₁₂O₄₀)]_n (1), [Eu(NMP)₆(PW₁₂O₄₀)]_n (2), and [Er₂(NMP)₁₂(PW₁₂O₄₀)][PW₁₂O₄₀] (3) (NMP=N-methyl-2-pyrrolidone), have been synthesized and characterized by elemental analysis, IR, UV-vis, and single-crystal X-ray diffraction. Compounds 1 and 2 exhibit 1D infinite zigzag chain structures, while compound 3 exhibits an ionic asymmetric structure due to lanthanide contraction. The three compounds are all photochromic. The magnetic susceptibility for 1 measured over the range 2-300 K shows that there is the dominant antiferromagnetic interaction in the compound. The results of luminescent properties show that compound 2 displays an interesting selectivity for Zn²⁺ ions.     

Application of tri- and tetrasubstituted alkene dipeptide mimetics to conformational studies of cyclic RGD peptides

The first application of a combination of novel ψ[(E)-CXCX]-type alkene dipeptide isosteres to conformation studies of cyclic bioactive peptides was carried out (X=H or Me). For exploration of bioactive conformations of Kessler's cyclic RGD peptides, cyclo(-Arg-Gly-Asp-d-Phe-Val-) 1 and cyclo(-Arg-Gly-Asp-d-Phe-N-MeVal-) 2, d-Phe-ψ[(E)-CXCX]-l-Val-type dipeptide isosteres were utilized having di-, tri- and tetrasubstituted alkenes containing the γ-methylated isosteres that have been reported to be potential type II′ β-turn promoters. All of the (E)-alkene pseudopeptides 3-6 exhibited higher antagonistic potency against α_vβ₃ integrin than 1, although potencies were slightly lower than 2. Detailed structural analysis using ¹H NMR spectroscopy revealed that representative type II′ β/γ backbone arrangements proposed for 1, were not observed in peptides 3-6. Rather on the basis of ¹H NMR data, the conformations of peptides 3-6 were estimated to be more analogous to those of the N-methylated peptide 2.