Synthesis of d-gluco-, l-ido-, d-galacto-, and l-altro-configured glycaro-1,5-lactams from tartaric acid

The d-gluco-, l-ido-, d-galacto-, and l-altro-configured glycaro-1,5-lactams 1-4 were prepared from the known tartaric anhydride 5 via the aldehyde 6. These lactams are known (1) or potential (2-4) inhibitors of β-d-glucuronidases and α-l-iduronidases. Olefination of 6 to the (E)- and (Z)-alkenes 7 or 8, followed by reagent or substrate controlled dihydroxylation, lactonization, azidation, reduction, and deprotection led in 10 steps and in overall yields of 11-20% to the title lactams.     

A common approach to the total synthesis of l-arabino-, l-ribo-C18-phytosphingosines, ent-2-epi-jaspine B and 3-epi-jaspine B from d-mannose

A common strategy for the total syntheses of the protected l-arabino- and l-ribo-C₁₈-phytosphingosine (8 and 9, respectively), HCl salts of ent-2-epi-jaspine B (ent-6) and 3-epi-jaspine B (7) with efficient use of both flexible building blocks 26 and 27 was achieved. The key step of this approach was [3,3]-sigmatropic rearrangement of allylic trichloroacetimidate 21 and thiocyanate 22, which were derived from the known 2,3:5,6-di-O-isopropylidene-d-mannofuranose 18 as the source of chirality. The side chain functionality was installed utilizing a Wittig reaction.     

l-Proline catalyzed one-step synthesis of 4,5-diaryl-2H-1,2,3-triazoles from heteroaryl cyanostilbenes via [3+2]cycloaddition of azide

Use of a novel reagent has been established for the synthesis of a series of 4,5-diaryl-2H-1,2,3-triazoles (6a–i and 9a–e) from cyanostilbene analogs of benzo[b]thiophene, benzo[b]furan, and indole, catalyzed by l-proline via Lewis base-catalyzed one-step [3+2]cycloaddition of azide. This method provides an efficient, simple, and environmentally benign procedure that affords good yields and relatively short reaction times.     

An efficient synthesis of d-ribo- and l-lyxo-phytosphingosine from d-tartaric acid

The preparations of d-ribo- and l-lyxo-phytosphingosines (1, 2) are described. Chelation-controlled addition of tetradecylmagnesium bromide to pentylidene-protected d-threitol aldehyde 6 afforded the key intermediate tetrol 7, providing the desired l-lyxo stereochemistry of phytosphingosine. Inversion at C4 of intermediate 7 provided the d-ribo stereochemistry.     

Gold(I) N-heterocyclic carbene based initiators for bulk ring-opening polymerization of l-lactide

Synthesis, structures, and catalysis studies of gold(I) complexes of N-heterocyclic carbenes namely, a di-O-functionalized [1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazol-2-ylidene], a mono-O-functionalized [1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazol-2-ylidene] and a non-functionalized [1,3-di-i-propyl-benzimidazol-2-ylidene], are reported. Specifically, the gold complexes, [1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazol-2-ylidene]AuCl (1c), [1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazol-2-ylidene]AuCl (2c), and [1,3-di-i-propyl-benzimidazol-2-ylidene]AuCl (3b), were prepared from the respective silver complexes 1b, 2b, and 3a by treatment with (SMe₂)AuCl in good yields following the commonly used silver carbene transfer route. The silver complexes 1b, 2b, and 3a were synthesized from the respective imidazolium halide salts by the reactions with Ag₂O. The N-heterocyclic carbene precursors, 1-(2-hydroxy-cyclohexyl)-3-(acetophenone)imidazolium chloride (1a) and 1-(2-hydroxy-cyclohexyl)-3-(benzyl)imidazolium chloride (2a), were synthesized by the direct reactions of cyclohexene oxide and imidazole with chloroacetophenone and benzyl chloride respectively. The gold (1c, 2c, and 3b) and the silver (3a) complexes along with a new O-functionalized imidazolium chloride salt (1a) have been structurally characterized by X-ray diffraction. The structural studies revealed that geometries around the metal centers were almost linear in these gold and silver complexes. The gold (1c, 2c, and 3b) complexes efficiently catalyze ring-opening polymerization (ROP) of l-lactide under solvent-free melt conditions producing polylactide polymer of moderate to low molecular weights with narrow molecular weight distributions.     

d-Phg-l-Pro Dipeptide-derived prolinol ligands for highly enantioselective Reformatsky reactions

Optically pure N-aminoethyl prolinol derivatives 3a-c have been prepared from the dynamic kinetic resolution of N-(α-bromo-α-phenylacetyl) proline ester 1 in asymmetric nucleophilic substitution and subsequent reduction. The peptide-derived prolinols are tested as chiral ligands in the asymmetric addition of Reformatsky reagent to aromatic aldehydes. Chiral ligand 3c has been shown to be effective to produce enantioenriched β-hydroxy esters 5a-j with up to 98% ee.     

Asymmetric syntheses of 6-deoxyfagomin, d-deoxyrhamnojirimycin, and d-rhamnono-1,5-lactam

N-Allyl protected 3-O-benzyloxglutarimide 11 was synthesized as a useful variant of the chiral building block 10. This modification allowed a high-yielding deprotection of the allyl group from the lactam intermediate 14. Starting from this building block, the asymmetric syntheses of aza-sugars 6-deoxyfagomine (2), d-rhamnono-1,5-lactam (6), as well as d-deoxyrhamnojirimycin (5) have been achieved in high regio- and/or diastereo-controlled manner.     

Syntheses of enantio-enriched chiral building blocks from l-glutamic acid

Starting from lactone-amide 8, easily derived from l-glutamic acid, enantioselective syntheses of (S)-tetrahydrofuran 2-carboxamide derivative 2 and a protected (S)-3-hydroxypiperidin-2-one (3) are reported. The building block 3 was converted to (2S,3R)-3-hydroxypipecolamide (6) by a three-step procedure. A solvent altered H-bonding capacity leading to a highly chemoselective tosylation of the primary hydroxyl group in the presence of an α-hydroxy-carboxamide was observed.     

Synthesis of l-azaisotryptophan and its analogs: a general access to new 2-substituted azaindoles

l-(N-Cbz)-7-azaisotryptophan, l-(N-Cbz)-1a, a new isostere of tryptophan, was synthesized by reacting Li₂-(N-Boc)-2-amino-3-picoline, Li₂-(N-Boc)-2a, with appropriately protected l-aspartic acid followed by simple functional group manipulation. This synthetic success led us to access a set of analogs of azaisotryptophan (4a–c; 6a–c) as well as a new class of chiral amines (7a–c; 8a–c) for future application in asymmetric synthesis and design of homochiral ligands. Further, we have generalized the method substantiating a variety of new azaindol-2-yl derivatives (10aa–10lc) with functionalized substituents. In a preliminary luminescence characterization, l-(N-Cbz)-1a has exhibited about 30 nm bathochromic shifted fluorescence emission compared to tryptophan and (N-Cbz)-tryptophan.     

Synthesis of eight-membered iminocyclitols from d-glucose

The Baylis-Hillman reaction of 3-O-benzyl-α-d-xylo-pentodialdo-1,4-furanose 2 afforded a diastereomeric mixture of l-ido- and d-gluco-configurated α-methylene-β-hydroxy esters 3a and 3b, respectively, in 1:1 ratio. Conjugate addition of benzyl amine on 3a gave adduct 4a as a major product while, addition of benzyl amine to 3b gave only one diastereomer 4b. Reduction of ester functionality in 4a/4b, opening of 1,2-acetonide functionality followed by reductive amino-cyclization under hydrogenation condition afforded azocanes 1c/1d in good yield.     

Tetrahydrofuran-mediated radical processes: stereoselective synthesis of d,l-hexestrol

The highly stereoselective synthesis of d,l-hexestrol (1), an inhibitor of microtubule assembly, is developed by using, as a key step, an intermolecular coupling of Co₂(CO)₆-complexed propargyl radicals. The latter are generated by novel complementary processes involving an interaction of tetrahydrofuran with Co₂(CO)₆-complexed propargyl alcohols and cations. An isomerically pure d,l-μ-η²-[3,4-di(4-methoxyphenyl)-1,5-hexadiyne]-bis-dicobalthexacarbonyl (d,l-6) is isolated in 69-91% yield with intermolecular coupling reactions exhibiting an excellent chemo- (0.5-7%) and d,l-diastereoselectivity (90-94%). The structure of d,l-6 is determined by X-ray diffraction. The subsequent steps include BBr₃-induced demethylation of 4-methoxyaryl groups, demetalation with cerium(IV) ammonium nitrate, and hydrogenation of acetylenic termini affording d,l-hexestrol (1).     

Hydrolytic degradation of carbohydrate-based polyamides of the AABB type derived from l-arabinose and d-xylose

The hydrolytic degradation of a series of aregic carbohydrate-based polyamides derived from l-arabinose and d-xylose is described. These polyamides are those that are fully sugar-based (PA-SuSu), those derived from aldaric acids and polyalkylene diamines (PA-mSu), and those derived from diamine sugars and polyalkylene dicarboxylic acids (PA-Sun). Their physical properties and crystal structures depend on their constitution and the configuration of the carbohydrate-based moiety. The feasibility of the hydrolysis of these polyamides was, in general, related with such structural properties. Thus, the fully sugar-based PA-SuSu were amorphous, water-soluble materials, and were hydrolysed in water at 70 °C. PA-mSu were crystalline and more resistant to hydrolysis — they were degraded at pH 2 and 70 °C [T_g(s) 60-90 °C]. PA-Sun were amorphous and highly hygroscopic materials — they were hydrolysed in water at 37 °C [T_g(s) 25-40 °C].     

Selection of synthetic receptors capable of sensing the difference in binding of d-Ala-d-Ala or d-Ala-d-Lac ligands by screening of a combinatorial CTV-based library

Screening of a combinatorial CTV-based artificial, synthetic receptor library 1 {1-13, 1-13, 1-13} for binding of a variety d-Ala-d-Ala and d-Ala-d-Lac containing ligands (6-11) was carried out in phosphate buffer (0.1 N, pH=7.0). After screening and Edman sequencing, synthetic receptors were found containing amino acid sequences, which are either characteristic for binding dye labeled d-Ala-d-Ala or d-Ala-d-Lac containing ligands. For example, receptors capable of binding d-Ala-d-Ala containing ligands 6, 7, 9 and 11 contained—almost in all cases—at least one basic amino acid residue—predominantly Lys—in their arms. This was really a striking difference with the arms of the receptors capable of binding d-Ala-d-Lac containing ligands 8 and 10, which usually contained a significant number of polar amino acids (Gln and Ser), especially in ligand 8, but hardly any basic amino acids. Use of different (fluorescent) dye labels showed that the label has a profound, albeit not decisive, influence on the binding by the receptor. A hit from the screening of the CTV-library with FITC-peptidoglycan (6) was selected for resynthesis and validation.     

Diastereoselective synthesis of new polyhydroxylated indolizidines from (l)-glutamic acid

A diastereoselective synthesis of two new swainsonine's analogues 1a and 1b with the piperidine ring fused to a phenyl nucleus at C6-C7, namely (1R, 2S, 10R, 10aR)-(+)-1,2,10-trihydroxy-1,2,3,5,10,10a-hexahydrobenzo[f] indolizine (1a) and (1S, 2R, 10R, 10aR)-(+)-1,2,10-trihydroxy-1, 2, 3, 5, 10, 10a-hexahydrobenzo[f] indolizine (1b), is described. Throughout this work, the effectiveness of the tricyclic indolizidine dione 5, readily available in three steps from the cheap l-glutamic acid, as an attractive platform for chemo- and stereodivergent transformations is illustrated. The key steps involved totally diastereoselective ketone reduction of compound 5 and catalytic cis-dihydroxylation of the unsaturated amide 10. The synthetic strategy also allowed for the diastereoselective synthesis of benzoanalogues of the 1,8a-di-epi-lentiginosine 3a ((1R, 2S, 10aR)-(+)-1,2-dihydroxy-1, 2, 3, 5, 10, 10a-hexahydrobenzo[f]indolizine) and 2,8a-di-epi-lentiginosine 3b ((1S, 2R, 10aR)-(+)-1,2-dihydroxy-1,2,3,5,10,10a-hexahydrobenzo[f]indolizine).     

Efficient synthesis of new N-alkyl-d-ribono-1,5-lactams from d-ribono-1,4-lactone

d-Ribono-1,4-lactone was treated with ethylamine in DMF to afford N-ethyl-d-ribonamide 9a in quantitative yield. Bromination of amide 9a by the system SOBr₂ in DMF or PPh₃/CBr₄ in pyridine led, after acetylation, to epoxide 7. However, treatment of amide 9a with acetyl bromide in dioxane followed by acetylation gave 2,3,4-tri-O-acetyl-5-bromo-5-deoxyl-N-ethyl-d-ribonamide 10a. Methanolysis of 10a, with sodium methoxide, afforded the N-ethyl-d-ribonolactam 11a in 51% overall yields. Using this method, N-butyl, N-hexyl, N-dodecyl, and N-benzyl-d-ribonolactams 11b-e were obtained in good yields (48-53%).     

Silver N-heterocyclic carbene complexes as initiators for bulk ring-opening polymerization (ROP) of l-lactides

Synthetic, structural and catalysis studies of two silver complexes namely, {[1-(2,4,6-trimethylphenyl)-3-(N-phenylacetamido)imidazol-2-ylidene]₂Ag}⁺Cl⁻1b, supported over an amido-functionalized N-heterocyclic carbene ligand, and [1-(i-propyl)-3-(benzyl)imidazol-2-ylidene]AgCl 2b, supported over a non-functionalized N-heterocyclic carbene ligand, are reported. Specifically, 1b, a cationic complex bearing 2:1 NHC ligand to metal ratio, was obtained from the reaction of 1-(2,4,6-trimethylphenyl)-3-(N-phenylacetamido)imidazolium chloride 1a with Ag₂O in 52% yield. The corresponding 1a was synthesized by the alkylation reaction of 1-(2,4,6-trimethylphenylimidazole) with N-phenyl chloroacetamide in 73% yield. The other silver complex 2b, a neutral complex bearing 1:1 NHC ligand to metal ratio, was obtained from the reaction of 1-(i-propyl)-3-(benzyl)imidazolium chloride 2a with Ag₂O in 42% yield. The 2a was synthesized by the alkylation reaction of 1-(i-propylimidazole) with benzyl chloride in 45% yield. The molecular structures of the imidazolium chloride, 1a, and the silver complexes, 1b and 2b, have been determined by X-ray diffraction studies. The silver complexes, 1b and 2b, successfully catalyze bulk ring-opening polymerization (ROP) of l-lactides at elevated temperatures under solvent-free melt conditions producing moderate to low molecular weight polylactide polymers having narrow molecular weight distributions.     

Polyhydroxylated pyrrolidines. Part 4: Synthesis from d-fructose of protected 2,5-dideoxy-2,5-imino-d-galactitol derivatives

The readily available 3-O-benzoyl-4-O-benzyl-1,2-O-isopropylidene-5-O-methanesulfonyl-β-d-fructopyranose (5) was straightforwardly transformed into its d-psico epimer (8), after O-debenzoylation followed by oxidation and reduction, which caused the inversion of the configuration at C(3). Compound 8 was treated with lithium azide yielding 5-azido-4-O-benzyl-5-deoxy-1,2-O-isopropylidene-α-l-tagatopyranose (9) that was transformed into the related 3,4-di-O-benzyl derivative 10. Cleavage of the acetonide in 10 to give 11, followed by regioselective 1-O-pivaloylation to 12 and subsequent catalytic hydrogenation gave (2R,3S,4R,5S)-3,4-dibenzyloxy-2,5-bis(hydroxymethyl)-2′-O-pivaloylpyrrolidine (13). Stereochemistry of 13 could be determined after O-deacylation to the symmetric pyrrolidine 14. Total deprotection of 14 gave 2,5-imino-2,5-dideoxy-d-galactitol (15, DGADP).     

A facile synthesis of 1,4-dideoxy-1,4-imino-l-ribitol (LRB) and (−)-8a-epi-swainsonine from d-glutamic acid

A facile synthesis of (−)-8a-epi-swainsonine 2 and 1,4-dideoxy-1,4-imino-l-ribitol (LRB) 4 has been achieved by using the versatile building block 3, which was available from cheap d-glutamic acid. The new forming stereogenic center in synthesis of 2 was constructed by highly selective reduction of the ketone 13 with Li(t-BuO)₃AlH in THF (dr=95:5).     

Stereoselective synthesis of l-isonucleosides

l-Isonucleosides 17 and 19 were stereoselectively synthesised from (S)-glycidol by two different procedures. The key step was the synthesis of a chiral dihydrofuran which was carried out by oxidation/elimination of 8 and by ring-closing metathesis of diene 10. The procedure can be applied to the synthesis of both enantiomers.     

Synthesis and characterization of alkali-metal aryloxo compounds and their catalytic activity for l-lactide polymerization

Three new alkali-metal compounds stabilized by aryloxo groups were synthesized and fully characterized. The reactions of carbon-bridged bis(phenol)s MBMPH₂ (MBMPH₂ = 2,2′-methylene-bis(6-tert-butyl-4-methylphenol)) with sodium and potassium metals in tetrahydrofuran (THF) gave the desired alkali-metal complexes [MBMPNa₂(THF)₃]₂ (1) and [(MBMPK₂)₂(THF)₅]₂ (2), respectively, in high isolated yields. A similar reaction of aminophenol [HNOH] ([HNOH] = N-p-methyl-phenyl(2-hydroxy-3,5-di-tert-butyl)benzylamine) with sodium gave the monosodium salt [HNONa(THF)]₂ (3). Compounds 1-3 were well characterized, including X-ray structure determination. Compound 1 has a dimeric structure, and each sodium atom is four-coordinated with four oxygen atoms to form a distorted tetrahedron. Compound 2 has a centrosymmetric tetrameric structure. The coordination environments around the four potassium atoms are different. K1 is four-coordinated, K2 is three-coordinated, K3 is five-coordinated, whereas the coordination sphere of K4 is completed by one aryloxo oxygen atom and two oxygen atoms from two THF molecules and six carbon atoms from one arene ring of the bis(phenolate) ligand. Compound 3 has a dimeric structure, and each of the sodium atoms is four-coordinated to form a distorted tetrahedron. It was found that compounds 1-3 can efficiently initiate the ring opening polymerization of l-lactide in the absence of alcohol, yielding polymers with high molecular weights for a wide range of monomer-to-initiator ratios.