Studies on the factors controlling the stereoselectivity in electrophilic iodocyclization of alkylidenecyclopropyl ketones

An efficient electrophilic iodocyclization of alkylidenecyclopropyl ketones with N-iodosuccinimide (NIS) or I₂ in aqueous CH₃CN affording 3-oxabicyclo[3.1.0]hexan-2-ols is described. NIS is a better electrophilic iodocyclization reagent than I₂. Four chiral centers were formed within one step. The stereochemistry was established by the X-ray diffraction studies of compounds 2e-2h, 2n, and 2c. It is quite interesting to observe that the substituent of the cyclopropane ring plays an important role in determining the relative stereochemistry at the 4-position: with R² being an acyl or ester group a mixture of (1S^∗,2R^∗,4S^∗,5R^∗)-2 (major) and (1R^∗,2R^∗,4R^∗,5R^∗)-2 (minor) was formed with moderate selectivity while the reaction of the substrates with R² being sulfonyl and p-methylphenylsulfonyl or R¹ being phenyl afforded (1R^∗,2R^∗,4S^∗,5S^∗)-2 or (1S^∗,2R^∗,4S^∗,5R^∗)-2f as the only product. The reaction is general for a range of different substrates to afford the products in moderate to high yields.     

Synthesis of butenolides recently isolated from marine microorganisms

The syntheses and ¹³C NMR analyses of four diastereomeric butenolides, two of which were recently isolated from the marine microorganisms Streptomycete B 5632 and Streptoverticillium luteoverticillatum 11014 are described. The two isolated butenolides were found to be one of the two diastereomers (4S,10R^∗,11R^∗)-4,11-dihydroxy-10-methyl-dodec-2-en-1,4-olide (RRS-1 or SSS-1) and one of the two diastereomers (4S,10S^∗,11R^∗)-4,11-dihydroxy-10-methyl-dodec-2-en-1,4-olide (SRS-1 or RSS-1). An asymmetric 1,3-dipolar cycloaddition of a thiocarbonyl ylide with a dipolarophile attached to camphorsultam and a ring-opening of an enantiomerically pure vinyloxirane by lithiated dithiane served as key steps for the construction of the three stereogenic centres. Further elaborations including ring-closing metathesis and Mitsunobu inversion furnished the four diastereomeric butenolides.     

Regio- and stereoselective cycloadditions of (1Z,4R,5R)-1-arylmethylidene-4-benzoylamino-3-oxo-5-phenylpyrazolidin-1-ium-2-ides to methyl methacrylate

[3+2] Cycloadditions of (1Z,4R^∗,5R^∗)-1-arylmethylidene-4-benzoylamino-3-oxo-5-phenylpyrazolidin-1-ium-2-ides 1a-e to methyl methacrylate gave the 1-CO₂Me regioisomers 3/3′, exclusively, in 1-67% yields. Stereocontrol was dependent on the ortho-substituents at the 1′-aryl group in dipole 1: ortho-unsubstituted dipoles 1a-c gave the major (1R^∗,3R^∗,5R^∗,6R^∗)-isomers 3a-c, whilst ortho-disubstituted dipoles gave the major (1R^∗,3S^∗,5R^∗,6R^∗)-isomers 3′d,e. The structures of cycloadducts were determined by NMR and X-ray diffraction.     

The intramolecular aromatic nucleophilic substitution as a route to tricyclic β-lactams. Synthesis of the novel 4-oxa-7-azabicyclo[4.2.0]octane skeleton

Sodium borohydride-carbonyl reduction of the novel 3-(2-fluoro-5-nitro) phenyl-4-benzoyl-2-azetidinones 3 and 7 gave quantitatively the stereoisomeric carbinols (4R^∗,5S^∗)-4 and (4R^∗,5R^∗)-5. Treatment of the latter with sodium hydride gave the title compounds 8 and 9, respectively, with good overall yield. The rationale of the stereochemical relationships outlined in the sequences 3 (or 7)→4→8 and 3 (or 7)→5→9 is given according to the conformational and keto-enol equilibria of the reactant(s).     

Unexpected cleavage of the N-N bond in the reactions of 3-pyrazolidinone-1-azomethine imines with HCN

Treatment of (1Z,4R^∗,5R^∗)-1-arylmethylidene-4-benzamido-5-phenylpyrazolidin-3-one 1-azomethine imines 4a-d with potassium cyanide in the presence of acetic acid resulted in addition of HCN to the exocyclic CN double bond followed by β-eliminative N-N single bond cleavage (ring opening) to give the N-[(1R^∗,2R^∗)-3-amino-2-benzamido-3-oxo-1-phenylpropyl]benzimidoyl cyanides 6a-d in 28-85% yields. Reaction of dipole 4e with HCN furnished stable intermediate, (1′S^∗,4R^∗,5R^∗)-4-benzamido-1-[cyano(mesityl)methyl]-5-phenylpyrazolidin-3-one (5e), in 76% yield. The structure of compound 6c was determined by X-ray diffraction.     

A mechanistic study on the intramolecular ionic Diels-Alder reaction of 2-methyl-3,9,11-tridecatriene-2-ol and 2,11-dimethyl-1,3,9,11-dodecatetraene

Intramolecular ionic Diels-Alder reaction of 2-methyl-3,9,11-tridecatriene-2-ol (1) was studied under acidic conditions. Treatment of 2-methyl-3,9,11-tridecatriene-2-ol (1) with trifluoromethanesulfonic acid yielded 7-methyl-8-isopropenyl-1,2,3,4,4aR^∗,7R^∗,8R^∗,8aS^∗-octahydronaphthalene (4) and (1Z)-1-((E)-but-2-enylidene)-2-(2-methylpropenyl)cyclohexane (5) through regioselective intramolecular ionic Diels-Alder reaction. The reaction appeared to proceed partly through a stepwise mechanism involving a carbocation intermediate. However, a concerted pathway rather than a stepwise one is suggested to be involved in the acid-catalyzed intramolecular Diels-Alder reaction of 2,11-dimethyl-1,3,9,11-dodecatetraene (13).     

Synthesis and stereochemical studies of 1- and 2-phenyl-substituted 1,3-oxazino[4,3-a]isoquinoline derivatives

Starting from the 1′- or 2′-phenyl-substituted 1-(2′-hydroxyethyl)-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline diastereomers 3 and 6, 4-unsubstituted and 4-(p-nitrophenyl)- and 4-oxo-substituted 1-phenyl- and 2-phenyl-9,10-dimethoxy-2H,4H-1,6,7,11b-tetrahydro-1,3-oxazino[4,3-a]isoquinolines (7-12) were prepared. The relative configurations and the predominant conformations of the products were determined by NMR spectroscopy, by quantum chemical calculations and, for (2R^∗,4S^∗,11bR^∗)-9,10-dimethoxy-4-(p-nitrophenyl)-2-phenyl-2H,4H-1,6,7,11b-tetrahydro-1,3-oxazino[4,3-a]isoquinoline (11), by X-ray diffraction.     

Stereoselective synthesis of the obscure mealybug pheromone by hydrogenation of a tetrasubstituted alkene precursor

An improved diastereoselective synthesis of (1R^∗,2R^∗,3S^∗)-1-acetoxymethyl-2,3,4,4-tetramethylcyclopentane 1, the sex pheromone of the obscure mealybug, Pseudococcus viburni, is described. The key step was diastereoselective catalytic hydrogenation of the tetrasubstituted double bond in 2,3,4,4-tetramethyl-cyclopent-2-enone 4 to give the thermodynamically less favored cis-2,3,4,4-tetramethyl-cyclopentanone 3a.     

Synthesis of ‘thianthrene dimer’ by the coupling reaction of stannylthianthrenes in the presence of copper catalysts

The coupling reaction of 1-tributylstannylthianthrene (5) and 2-tributylstannylthianthrene (7) in the presence of copper catalysts at rt afforded the thianthrene dimer 1,1′-bithianthrene (3), 2,2′-bithianthrene (8), and 1,2′-dithianthrene (9) in high yields. Also we obtained thianthrene oxide dimer (R,R) (S,S)-1-(10-S-monoxythianthrene-1-yl)thianthrene-10-S-monoxide (12) and (R,S) (S,R)-1-(10-S-monoxythianthrene-1-yl)thianthrene-10-S-monoxide (13) from 1-tributylstannyl-10-S-monoxythianthrene (10) under the same reaction condition. The final structural conformation of 3, 8, 9, and 12 was performed by X-ray crystallographic analysis. Further, the solvent effects in the coupling reactions were also examined.     

Total synthesis of (±)-luminacin D

A 15-step synthesis of (±)-luminacin D from ethyl pent-2-ynoate is reported. The pivotal step involves the formation of the central C-2′/C-3′ bond of the natural product by condensation of the titanium enolate derived from aromatic ketone 1 with aldehyde 2a. A remote asymmetric centre in aldehyde 2a exerts control over the stereochemical course of this reaction, with the major adduct (3a, 54% yield) possessing the required (2′S^∗,3′R^∗,5′R^∗)-stereochemistry. This assignment was unambiguously established by X-ray crystallography of late stage synthetic intermediate, 17. Further manipulation of 3a (six steps) yielded synthetic (±)-luminacin D spectroscopically identical to material isolated from Streptomyces sp. Mer-VD1207 by Naruse et al.     

Reactions of hafnocene stannyl complexes with stannanes: implications for the mechanism of the metal-catalyzed dehydropolymerization of secondary stannanes

Reactions of the hydrostannyl complexes CpCp^∗Hf(SnHMes₂)Cl (2), [Me₂C(C₅H₄)₂]Hf(SnHMes₂)NMe₂ (3) and CpCp^∗Hf(SnHMes₂)OMe (4) with Ph₂SnH₂ or ⁿBu₂SnH₂ afforded poly- and oligostannanes of varying molecular weights. The reaction of 2 with 1.2 equiv. of Ph₂SnH₂ produced the oligostannyl complexes CpCp^∗Hf(SnPh₂SnHMes₂)Cl (6, 68%), CpCp^∗Hf(SnPh₂SnHPh₂)Cl (7, 15%), and CpCp^∗Hf(SnPh₂SnPh₂SnHPh₂)Cl (8, 7%), which may be intermediates in the dehydropolymerization process. Compounds 7 and 8 were observed in higher yields in the reaction of CpCp^∗Hf(H)Cl (1) with 2 equiv. of Ph₂SnH₂. Possible mechanisms for the formation of 6, 7, and 8 are discussed. Two trialkylstannyl complexes, CpCp^∗Hf(SnMe₃)Cl (11) and CpCp^∗Hf(SnⁿBu₃)Cl (12), were synthesized in good yields from the reaction of 1 with R₃SnH (R=Me, ⁿBu). When a solution of 11 was heated to 100 °C for 1 h, CpCp^∗Hf(SnMe₂SnMe₃)Cl (13) and CpCp^∗Hf(SnMe₂SnMe₂SnMe₃)Cl (14) were formed, probably via Me₂Sn insertion into Hf-Sn bonds. Based on the known influence of catalyst structure on the molecular weight of polystannanes, and the observations reported herein, it is proposed that the Sn-Sn bond-forming mechanism may involve R₂Sn insertions into M-Sn bonds.     

New isomers of 4,1-benzothiazepines. The first evidence for the desmotropy of seven-membered heterocycles

A novel procedure was developed for the preparation of 2,3-disubstituted 4,1-benzothiazepines, via the ring transformation of (2R^∗,2aS^∗)-2-chloro-2a-phenyl-2,2a-dihydro-2H,4H-azeto[1,2-a][3,1]benzothiazin-1-one (1) with sodium ethoxide in ethanol. The tautomeric products (R^∗)-3-ethoxycarbonyl-2-phenyl-3,5-dihydro-4,1-benzothiazepine (4) and 3-ethoxycarbonyl-2-phenyl-1,5-dihydro-4,1-benzothiazepine (5) exhibit the rare phenomenon of desmotropy of the condensed seven-membered heterocycles. Surprisingly, these desmotropes could be separated by column chromatography. The products are unexpectedly stable in solution and their structures were proved by means of NMR and mass spectrometry.     

New natural products in the discorhabdin A- and B-series from New Zealand-sourced Latrunculia spp. sponges

A survey of the secondary metabolite chemistry profiles of New Zealand sponges of the genus Latrunculia has yielded new members of the discorhabdin A- and B-type families. The structure elucidation of (+)-(6R,8S)-1-thiomethyldiscorhabdin G^∗/I (5) and both enantiomers of 16a,17a-dehydrodiscorhabdin W (6) are reported. Absolute configurations were assigned by comparison with a dataset of recently reported electronic circular dichroism spectra of discorhabdin alkaloids. A stereochemical correction of the recently reported natural product (+)-3-dihydrodiscorhabdin A from (3S,5R,6S,8S)-(7) to the C3-epimeric (+)-(3R,5R,6S,8S)-(8) and assignment of absolute configuration is also presented. Semi-synthesis of (+)-(3S,5R,6S,8S)-(7) from (+)-discorhabdin A provided further evidence for this structure revision. Cytotoxicity data is reported for 5-8.     

Effect of α-fluorination on asymmetric epoxidation of trans-olefins using α-fluorinated cyclohexanone dioxiranes

Epoxidations of trans-β-methylstyrene, trans-stilbene and trans-methyl p-methoxycinnamate using chiral dioxiranes derived from both enantiopure diastereomers of α-fluoro cyclohexanones, (2S, 5R)-3a-6a and (2R, 5R)-3e-6e are studied and compared. From ab initio calculations at the HF/6-31G^∗ level of conformational inter-conversion for (2S, 5R)-D5a and (2R, 5R)-D5e dioxiranes it was found that, due to the α-fluorine atom, conformer K1 is more stable in the case of (2S, 5R)-D5a while conformer K2 is more stable in the case of (2R, 5R)-D5e. However, in both cases, the more stable conformers, K1 and K2, undergo rapid inter-conversion. Therefore, based on slow epoxidation reactions and rapid ring inversion of six-membered ring dioxiranes the Curtin-Hammett principle holds. Conformation K2 with axial fluorine having been found to be more reactive, the inversion of configuration observed for the epoxides obtained with ketones 3e-6e (compared with ketones 3a-6a) could be rationalized from competitive reactions of K2 and K1 conformations leading to simultaneous production of both (−) and (+) epoxides in the case of ketones 3e-6e.     

Synthesis and structural determination of the C33-C42 fragment of symbiodinolide

Symbiodinolide (1) is a polyol macrolide with a molecular weight of 2859 mu. As one of the degradation reactions, cross-metathesis of 2, which is a methyl ester of 1, with ethylene was performed to give the C33-C42 degraded fragment 4. The absolute configuration of 4 was estimated to be (36S,40S) by Mosher method. Stereoselective synthesis of 4 was achieved in 14 steps from l-aspartic acid. Synthetic bis-(S)- and (R)-MTPA esters exhibited the spectroscopic data identical with those of bis-(S)- and (R)-MTPA esters derived from the degraded fragment 4. Thus, the absolute stereochemistry of 4 was elucidated to be (36S,40S).     

Polyhydroxylated pyrrolidines, III. Synthesis of new protected 2,5-dideoxy-2,5-iminohexitols from d-fructose

The readily available 3-O-benzoyl-4-O-benzyl-1,2-O-isopropylidene-β-d-fructopyranose (6) was straightforwardly transformed into 5-azido-3-O-benzoyl-4-O-benzyl-5-deoxy-1,2-O-isopropylidene-β-d-fructopyranose (8), after treatment under modified Garegg's conditions followed by reaction of the resulting 3-O-benzoyl-4-O-benzyl-5-deoxy-5-iodo-1,2-O-isopropylidene-α-l-sorbopyranose (7) with lithium azide in DMF. O-debenzoylation at C(3) in 8, followed by oxidation and reduction caused the inversion of the configuration to afford the corresponding β-d-psicopyranose derivative 11 that was transformed into the related 3,4-di-O-benzyl derivative 12. Cleavage of the acetonide of 12 to give 13 followed by O-tert-butyldiphenylsilylation afforded a resolvable mixture of 14 and 15. Compound 14 was transformed into (2R,3R,4S,5R)- (17) and (2R,3R,4S,5S)-3,4-dibenzyloxy-2′,5′-di-O-tert-butyldiphenylsilyl-2,5-bis(hydroxymethyl)pyrrolidine (18) either by a tandem Staudinger/intramolecular aza-Wittig process and reduction of the resulting intermediate Δ²-pyrroline (16), or only into 18 by a high stereoselective catalytic hydrogenation. When 15 was subjected to the same protocol, (2S,3S,4R,5R)- (21) and (2R,3S,4R,5R)-3,4-dibenzyloxy-2′-O-tert-butyldiphenylsilyl-2,5-bis(hydroxymethyl)pyrrolidine (22) were obtained, respectively.     

A new route for the preparation of the 22,23-dioxocholestane side chain from diosgenin and its application to the stereocontrolled construction of the 22R,23S-diol function

The new (22R,23S,25R)-3β,16β,26-triacetoxy-cholest-5-ene-22,23-diol (11a) was synthesized from diosgenin (3) through a synthetic route based on chemoselective RuO₄ oxidation of (25R)-3β,16β-diacetoxy-23-ethyl-23¹,26-epoxycholesta-5,23(23¹)-dien-22-one (9) that afforded (20S,25R)-3β,16β,26-triacetoxycholest-5-ene-22,23-dione (10) which was stereoselectively reduced using NaBH₄. Compound 9 was obtained from the known isomeric 22,26-epoxycholest-5-ene steroidal skeleton 8b by treatment with p-TsOH in toluene, amberlyst-15 or directly from diosgenin by treatment with BF₃·OEt₂/Ac₂O. Chemoselective reduction of the 23-keto group of 10, was attained using NaBH₄/ZnCl₂ at −70 °C to give 23S-14. The NMR spectra of all compounds were unambiguously assigned based on one and two dimensional experiments and the C-22 and C-23 stereochemistry in the diacetate derivative 11b, as well as the structure of epoxycholestene 9 were further established by X-ray diffraction analyses. The new route for the functionalization of the side chain of diosgenin can find application in the synthesis of norbrassinosteroid analogues.     

Studies on Wittig rearrangement of furfuryl ethers in steroidal side chain synthesis

Wittig rearrangement of 17(20)-ethylidene-16-furfuryloxy steroids 5-8 was examined. Reaction of 17E(20)-ethylidene-16α-furfuryloxy steroid 5 with t-BuLi in THF afforded (20S,22S)- and (20S,22R)-22-hydroxy steroids 9, 10 and 17Z(20)-ethylidene-16α-(2-furyl)hydroxymethyl steroid 11 in 61, 28, and 9% yields, respectively. Base treatment of 17E(20)-ethylidene-16β-furfuryloxy steroid 7 gave (20R,22R)-22-hydroxy steroid 13 and 17Z(20)-ethylidene-16β-(2-furyl) hydroxymethyl steroid 14 in 60 and 17% yields. In contrast, 17Z(20)-ethylidene-16-furfuryloxy steroids 6, 8 led to the corresponding 2,3-rearranged products in low yields (25% for (20R,22S)-22-hydroxy steroid 12; 31% for (20S,22R)-22-hydroxy steroid 10). Both (20S,22S)- and (20S,22R)-22-hydroxy steroids 9, 10 were converted by catalytic hydrogenation into known compounds 16, 17, key intermediates for the synthesis of biologically active steroids.     

Enantioselective synthesis of axially chiral 1-(1-naphthyl)isoquinolines and 2-(1-naphthyl)pyridines through sulfoxide ligand coupling reactions

Racemic 1-(1′-isoquinolinyl)-2-naphthalenemethanol rac-12 was prepared through a ligand coupling reaction of racemic 1-(tert-butylsulfinyl)isoquinoline rac-7 with the 1-naphthyl Grignard reagent 10. Resolution of rac-12 was achieved through chromatographic separation of the Noe-lactol derivatives 14 and 15, providing (R)-(−)-12 of >99% ee and (S)-(+)-12 of 90% ee. The ligand coupling reaction of optically enriched sulfoxide (S)-(−)-7 (62% ee) with Grignard reagent 10 furnished rac-12, with the absence of stereoinduction resulting from competing rapid racemisation of the sulfoxide 7. Reaction of optically enriched (S)-(−)-7 with 2-methoxy-1-naphthylmagnesium bromide was also accompanied by racemisation of the sulfoxide 7, and furnished optically active (+)-1-(2′-methoxy-1′-naphthyl)isoquinoline (+)-3b in low enantiomeric purity (14% ee). The absolute configuration of (+)-3b was assigned as R using circular dichroism spectroscopy, correcting an earlier assignment based on the Bijvoet method, but in the absence of heavy atoms. Optically active 2-pyridyl sulfoxides were found not to undergo racemisation analogous to the 1-isoquinolinyl sulfoxide 7, with the ligand coupling reactions of (R)-(+)- and (S)-(−)-2-[(4′-methylphenyl)sulfinyl]-3-methylpyridines, (R)-(+)-17 and (S)-(−)-17, with 2-methoxy-1-naphthylmagnesium bromide providing (−)- and (+)-2-(2′-methoxy-1′-naphthyl)-3-methylpyridines, (−)-18 and (+)-18, in 53 and 60% ee, respectively. The free energy barriers to internal rotation in 3b and 18 have been determined, and the isoquinoline (R)-(−)-12 examined as a ligand in the enantioselectively catalysed addition of diethylzinc to benzaldehyde; (R)-(−)-12 was also converted to (R)-(−)-N,N-dimethyl-1-(1′-isoquinolinyl)-2-naphthalenemethanamine (R)-(−)-19, and this examined as a ligand in the enantioselective Pd-catalysed allylic substitution of 1,3-diphenylprop-2-enyl acetate with dimethyl malonate.     

Pheromone synthesis. Part 245: Synthesis and chromatographic analysis of the four stereoisomers of 4,8-dimethyldecanal, the male aggregation pheromone of the red flour beetle, Tribolium castaneum

All four stereoisomers of 4,8-dimethyldecanal (1) were synthesized from the enantiomers of 2-methyl-1-butanol and citronellal. Enantioselective GC analysis enabled separation of (4R,8R)-1 and (4R,8S)-1 from a mixture of (4S,8R)-1 and (4S,8S)-1, when octakis-(2,3-di-O-methoxymethyl-6-O-tert-butyldimethylsilyl)-γ-cyclodextrin was employed as a chiral stationary phase. Complete separation of the four stereoisomers of 1 on reversed-phase HPLC at −54 °C was achieved after oxidation of 1 to the corresponding carboxylic acid 12 followed by its derivatization with (1R,2R)-2-(2,3-anthracenedicarboximido)cyclohexanol, and the natural 1 was found to be a mixture of all the four stereoisomers.