New and clean synthesis of N-substituted pyrroles under microwave irradiation

N-Substituted homochiral pyrrole derivatives were synthesized by the ring-closure reaction of cis-1,4-dichloro-2-butene with various amine compounds on a silica surface under microwave irradiation.     

A rapid and efficient protocol for the synthesis of novel nitrothiazolo[3,2-c]pyrimidines via microwave-mediated Mannich cyclisation

Several 6-substituted-8-nitrothiazolo[3,2-c]pyrimidine derivatives have been obtained very efficiently by a multicomponent cyclisation of 2-(nitromethylene)thiazolidine, formaldehyde and various aliphatic or aromatic amines in water, using both microwave irradiation and conventional heating. Reaction yields were considerably higher and the reaction times very much reduced using microwave heating when compared to conventional heating, resulting in the definition of a rapid and efficient synthetic protocol.     

Microwave-assisted rapid and efficient synthesis of C-alkyl imidazoisoquinolinone derivatives

The synthesis of a set of 10-benzyl-2,3-dihydroimidazo[1,2-b]isoquinolin-5(1H)-one and 5-oxo-imidazo[1,2-b]isoquinolin-10-yl)-N-phenylacetamide derivatives was achieved by exposing the corresponding alkylating agent and imidazoisoquinolinone to microwave irradiation and traditional oil bath heating in the presence of K₂CO₃ and DMAP. The microwave technique as well as DMAP as base accelerated the alkylation reaction for 2-6 min giving 79-88% yields.     

Three practical approaches for the synthesis of novel 4,7-dihetarylpyrazolo[1,5-a][1,3,5]triazines

Novel 4,7-dihetarylpyrazolo[1,5-a][1,3,5]triazines were synthesized from three different approaches. The first one, involved a one-step reaction between 5-amino-3-hetaryl-1H-pyrazoles and O,S-diethyl hetaroylimidothiocarbonates or S,S-diethyl hetaroylimidodithiocarbonates under solvent-free conditions employing microwave irradiation as the energy source. In the second approach, conventional heating under reflux in DMF as solvent was used instead of the microwave irradiation; and the third one was achieved from a two-step sequence through the treatment of 5-amino-3-hetaryl-1H-pyrazoles with hetaroyl isothiocyanates and the subsequent S-alkylation and cyclization process in DMF as solvent. Some intermediates were isolated and characterized to support the regiochemistry of the studied reactions. The structures of the new compounds were unambiguously established by spectroscopic and analytical techniques.     

Microwave-assisted SNAr reaction of 2,4,6-trichloro-1,3,5-triazine for the rapid synthesis of C3-symmetrical polycarboxylate ligands

The microwave-assisted S_NAr reaction of 2,4,6-trichloro-1,3,5-triazine with various unprotected amino acids was developed for the synthesis of C₃-symmetrical polycarboxylate ligands which can be used as structural directing units in metal-organic frameworks. The reactions were performed in water using a domestic microwave oven as the heating device. In comparison to the reactions performed under conventional heating, the reactions under microwave irradiation proceeded much more rapidly within 20 min to afford the desired ligands in comparative yields to those obtained by conventional heating.     

Reactions of chloroalkyl-gem-dichlorocyclopropanes with amines

N-Alkylation of primary and secondary amines with monochloroalkyl-gem-dichlorocyclopropanes under conditions of thermal and microwave heating results in the corresponding amino-gem-dichlorocyclopropanes. With microwave irradiation heating, the reaction time has been decreased to 1 h, the yields of the amines containing gem-dichlorocyclopropane moiety being the same. Formation of the bicyclic amine in reaction of cis-2,3-dichloromethyl-gem-dichlorocyclopropane with primary amines under conditions of phasetransfer catalysis has been studied.     

微波作用下的多肽固相缩合反应及动力学研究

分别在微波作用以及传统加热两种方式下, 研究了Fmoc-Val-OH与NH₂-Tyr(t-Bu)-Wang树脂的固相缩合反应及其动力学. 测定了温度变化对反应速率的影响, 并获得了两种方式下的缩合反应的宏观动力学参数: 300 W微波作用下表观缩合反应级数为2.3, 活化能为104.7 kJ/mol; 传统方法中表观反应级数为2.9, 活化能为142.4 kJ/mol. 微波作用将常规条件下的连接率由68%提高到95%, 而所需时间降为常规条件的1/14.     

Microwave-assisted epoxidation of hindered homoallylic alcohols using VO(acac)2: application to polypropionate synthesis

The VO(acac)₂ catalyzed epoxidation of hindered homoallylic alcohols was conducted under microwave irradiation in an open vessel using toluene as solvent. The reaction time for the epoxidation of a series of cis- and trans-2-methyl-3-alkenols was dramatically reduced from 6 to 10 days to less than 3 h when compared to conventional heating. The cis alkenols exhibited very high diastereoselectivity. The more elaborated polypropionate precursors 12, 14 and 16 were epoxidized in good yield and excellent diastereoselectivities using the microwave-assisted epoxidation technique described here, which is safe and suitable for multi-gram scales.     

An efficient and rapid synthesis of β-carboxamide derivatives using 2,2-dimethyl-2H,4H-1,3-dioxin-4-ones by microwave irradiation

A general, efficient and rapid method for the synthesis of various β-carboxamide derivatives using microwave irradiation is described. Excellent isolated yields were obtained in very short reaction times when conventional heating was replaced by microwave irradiation.     

微波辐射下5-取代-2-硫代海因衍生物的合成

微波辐射下, 由硫氰酸铵与α-氨基酸通过两步反应合成了11种5-取代-2-硫代海因衍生物, 并用¹H NMR, IR和元素分析确证了中间产物和终产物的结构. 对比常规加热方法, 微波辐射具有反应时间短(4 min), 每步反应产率高(85%～93%)的优点. 同时对合成化合物2h的反应历程进行了讨论.     

Melamine–formaldehyde resin supported H a mild and inexpensive reagent for synthesis of coumarins under mild conditions

Melamine-formaldehyde resin supported H~+ is used as an efficient catalyst in the Pechmann condensation reaction of phenols withβ-ketoesters,in solvent-free media leading to the formation of coumarin derivatives using conventional heating and microwave irradiation in excellent yields with good purity.     

Convenient syntheses of pyrazolo[3,4-b]pyridin-6-ones using either microwave or ultrasound irradiation

An efficient synthesis of 12 pyrazolo[3,4-b]pyridin-6-one derivatives was achieved using either microwave or ultrasound irradiation, resulting in yields of 40-60% and 60-95%, respectively. Under our conditions, these reactions occurred with notably reduced reaction times as compared to literature reports involving traditional heating. Furthermore, these reactions were highly regioselective and produced only one pyrazolo[3,4-b]pyridin-6-one isomer, whose identity was confirmed by NOESY spectroscopy.     

Microwave-assisted synthesis and antimicrobial activity of novel spiro 1,3,4-thiadiazolines from isatin derivatives

This work describes the synthesis of spiro 1,3,4-thiadiazolines from isatin-β-thiosemicarbazone acetylation, using microwave irradiation as a source of heating the reaction medium. N-substituted isatin derivatives were used as substrates to obtain thiosemicarbazones by adding thiosemicarbazide to the isatin ketone carbonyl. The final synthetic step was the reaction of thiosemicarbazones with acetic anhydride under microwave irradiation to get the spiro compounds. Reaction times ranged from 6 to 18 minutes resulting in yields of up to 90%. Biological assays have shown promising antibacterial and antifungal activity, especially spiro thiadiazolines derived from allylated isatins. All the proposed molecules proved to be potential drug candidates based on the results of the in silico investigation, with satisfactory drug-likeness and drug-score, respecting Lipinski's rule. The use of the microwave reactor was efficient for the synthesis of thiosemicarbazones and spiro compounds, resulting in a significant reduction in reaction times with conventional heating. Taking into account the threat of antimicrobial resistance, this work presents a series of bioactive molecules that are easily obtained via microwave reaction.     

One-pot synthesis of novel spiro 2,3,7,8-tetrahydro-benzo[1,2-b:5,4-b′]dipyran-4,6-dione and 2,3,8,9-tetrahydro-benzo[1,2-b:4,3-b′]dipyran-4,10-dione derivatives

An efficient synthesis of novel spiro 2,3,7,8-tetrahydro-benzo[1,2-b:5,4-b′]dipyran-4,6-dione and 2,3,8,9-tetrahydro-benzo[1,2-b:4,3-b′]dipyran-4,10-dione derivatives in high yields under microwave irradiation is described. The reaction was also studied under conventional heating conditions.     

Synthesis of gem-difluorides from aldehydes using DFMBA

Synthesis of gem-difluorides from aldehydes was effectively achieved using DFMBA and Et₃N-3HF under microwave irradiation or conventional thermal heating. Both aromatic and aliphatic aldehydes could be converted to the corresponding gem-difluorides in good yields.     

An efficient one-step regiospecific synthesis of novel isoxazolines and isoxazoles of N-substituted saccharin derivatives through solvent-free microwave-assisted [3+2] cycloaddition

Novel isoxazolines and isoxazoles of N-substituted saccharin derivatives are synthesized in good yields by 1,3-dipolar cycloaddition of N-allyl or propargyl N-substituted saccharin with arylnitrile oxide under solvent-free microwave irradiation. In this process, the yields were significantly improved over conventional heating, without alteration of the selectivity. The regioselectivity as well as the nonthermal specific microwave effect are discussed.     

Multicomponent synthesis of imidazo[1,2-a]pyridines using catalytic zinc chloride

The novel use of zinc chloride to catalyze the one-pot, three component synthesis of imidazo[1,2-a]pyridines from a range of substrates using either conventional heating or microwave irradiation is described. This methodology affords a number of imidazo[1,2-a]pyridines in reasonable yields and short reaction times without any significant optimization of the reaction conditions.     

Coumarin synthesis via Knoevenagel condensation reaction in 1,1,3,3-N,N,N′,N′-tetramethylguanidinium trifluoroacetate ionic liquid

Coumarin derivatives were synthesized in relatively high yields via Knoevenagel condensation reaction of an ortho-hydroxyaryl aldehyde and an activated β-dicarbonyl C-H acid in the presence of a recyclable ionic liquid 1,1,3,3-N,N,N′,N′-tetramethylguanidinium trifluoroacetate under either classical heating conditions or using microwave irradiation. Application of microwave irradiation decreased the required time by a factor of about 200. The ionic liquid could be recycled several times without loss of efficiency with regards to the reaction times and yields.     

Preparation and Characterization of Quaternized Chitosan Under Microwave Irradiation

For the first time, N-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride (HTCC) was prepared through a fast, easy and efficient method with the assistance of microwave irradiation, and the quaternized chitosan was also degraded via the microwave irradiation. A comparative study was performed by using the conventional heating method to prepare HTCC. The structure and property of the quaternized chitosan obtained by these two methods were characterized by GPC, XRD, FTIR, NMR, TG and elemental analysis. It was shown that quaternized chitosan was successfully prepared within 50 min via microwave irradiation method, while a much longer time of 6–7 h was needed with the conventional heating method. The substitutions both occurred on the C2 position of chitosan with the two different methods, and their HTCC products had weight average similar molecular weight (Mw), structure and thermal stability. The HTCC prepared by the microwave irradiation method had a little lower degree of substitution (DS) than those prepared via conventional heating with the same mole ratio (6:1) of the intermediate to chitosan. The degradation study showed that the Mw of HTCC decreased rapidly from 4.6 × 10⁵ to 1.1 × 10⁵ in 1 h under microwave irradiation, while it only decreased from 4.6 × 10⁵ to 2.1 × 10⁵in 1 h through conventional heating degradation. These results revealed that microwave irradiation is a more efficient and environment-friendly way to obtain the water-soluble chitosan derivatives and their degraded products.     

Deoxyfluorination of alcohols using N,N-diethyl-α,α-difluoro-(m-methylbenzyl)amine

Deoxyfluorination of alcohols was carried out using N,N-diethyl-α,α-difluoro-(m-methylbenzyl)amine (DFMBA). Primary alcohols were effectively converted to fluorides under microwave irradiation or conventional heating. Deoxyfluorination of an anomeric hydroxy group in sugars by DFMBA proceeded at below room temperature and glycosyl fluorides could be obtained in good yields. The deoxyfluorination reaction chemoselectively proceeded and various protecting groups on the sugar can survive under the reaction conditions.