ω-氯氟烷基醇,烯烃及环氧化物的合成

本文报道在引发剂存在下, ω-氯氟烷基碘与烯丙基化合物(CH~2=CH-CH~2X, X=OH,OAC) 及乙烯基化合物CH~2=CH-OAC 发生自由基加成反应, 生成相应的加成产物Cl(CF~2)~nCH~2CHICH~2OH (2a～d), Cl(CF~2)~nCH~2CHICH~2OAC (3a～d)和Cl(CF~2)~nCH~2CHIOAC (4a～d) , 产率较好.2a～d用LiAlH~4脱碘生成Cl(CF~2)~nCH~2CH~2CH~2OH(5a～d), 反应条件温和. 2a～d与KOH-CH~3OH反应， 主要得到醇Cl(CF~2)~nCH=CHCH~2OH (6a～c), 若2a～d与NaOH-水溶液反应则得到环氧丙烷化合物. 在少量HOAC存在下， 异丙醇溶剂中， 锌粉与2a～d和3a～d反应得到消除产物Cl(CF~2)~n-CH~2CH=CH~2 (8a～d) . 4a～d与锌反应，再经KOH-CH~3OH-H~2O水解得到Cl(CF~2)~n(CH~2)~2OH(10a～d).     

H_2O_2氧化N_2生成N_2O和H_2O机理的研究

采用量子化学计算方法研究了Ｈ２Ｏ２ 氧化Ｎ２ 生成Ｎ２Ｏ 和Ｈ２Ｏ 的机理．结果发现, Ｈ２Ｏ２ 氧化Ｎ２ 先通过１ 个四元环过渡态形成中间体Ｈ２Ｎ２Ｏ２ 分子,Ｈ２Ｎ２Ｏ２ 再通过一个五元环过渡态形成Ｎ２Ｏ和Ｈ２Ｏ．根据计算得到的每步反应的活化能,得知Ｈ２Ｏ２ 氧化Ｎ２ 生成中间体Ｈ２Ｎ２Ｏ２ 分子是整个反应的控制步骤．     

Hf3 cluster is triply (sigma-, pi-, and delta-) aromatic in the lowest D3h, 1A1' state

The extensive search for the global minimum structure of Hf3 at the B3LYP/LANL2DZ level of theory revealed that D3h 3A2' (1a1'(2)1a2'(2)1e'(4)2a1'(2)1e'2) and D3h 1A1' (1a1'(2)2a1'(2)1e'(4)1a2'(2)3a1'2) are the lowest triplet and singlet states, respectively, with the triplet state being the lowest one. However, at the CASSCF(10,14)/Stuttgart+2f1g level of theory these two states are degenerate, indicating that at the higher level of theory the singlet state could be in fact the global minimum structure. The triplet D3h 3A2' (1a1'21a2'(2)1e'(4)2a1'(2)1e'2) structure is doubly (sigma- and pi-) aromatic and the singlet D3h 1A1' (1a1'(2)2a1'(2)1e'(4)1a2'(2)3a1'2) structure is the first reported triply (sigma-, pi-, and delta-) aromatic system.     

CuCl/SiO2-TiO2 催化剂的结构及其催化甲醇氧化羰基化反应性能

 在微波辐射条件下, 将 CuCl 快速分散到载体表面制得 CuCl/SiO2-TiO2 催化剂, 利用 X 射线衍射、透射电镜、N2 吸附-脱附、热重、H2 程序升温还原和 CO 程序升温脱附对催化剂进行了表征. 结果表明, 微波辐射制备的催化剂中 CuCl 和载体发生了强相互作用, 比传统加热制备的催化剂中形成更多的易还原铜物种, 吸附 CO 的能力更强. 在甲醇液相氧化羰基化反应中, 微波辐射制备的催化剂上甲醇转化率为 11.7%, 碳酸二甲酯选择性达 96.5%, 高于相同条件下传统加热制备催化剂的活性.     

Boron/nitrogen substitution of the central carbon atoms of the biphenalenyl diradical π dimer: a novel 2e-12c bond and large NLO responses

On the basis of the famous staggered biphenalenyl diradical π dimer 1, the eclipsed biphenalenyl (1a), with no centrosymmetry, was obtained by rotating a layer of 1 by 60° around its central axis. Furthermore, the central carbon atoms of 1 and 1a were substituted by boron and nitrogen atoms to form 2 and 2a with a novel 2e-12c bond. We found that the novel 2e-12c bond is formed by the electron pair of the occupied orbital of the phenalenyl monomer substituted by the nitrogen atom and the unoccupied orbital of the phenalenyl monomer substituted by the boron atom. As a result of the novel 2e-12c bond, 2 and 2a exhibit a fascinating interlayer charge-transfer transition character, which results in a significant difference in the dipole moments (Δμ) between the ground state and the crucial excited state. The values of Δμ for 2 and 2a are 6.4315 and 6.9253 Debye, clearly larger than the values of 0 and 0.0015 Debye for 1 and 1a. Significantly, the boron/nitrogen substitution effect can greatly enhance the first hyperpolarizabilities (β(0) ) of 2 and 2a with a novel 2e-12c bond compared with 1 and 1a with a traditional 2e-12c bond: 0 and 19 a.u. for 1 and 1a are much lower than 3516 and 12272 a.u. for 2 and 2a. Furthermore, the interaction energies (E(int) )of 2 and 2a are larger than those of 1 and 1a, which could be considered as a signature of reliability for the newly designed dimers. Our present work will be beneficial for further theoretical and experimental studies on the properties of molecules with the novel 2e-12c bond.     

5-[N-乙酸根(4-吡啶基)]四唑为桥联配体的铜(Ⅱ)、镉(Ⅱ)配聚物

以5-[N-乙酸根(4-吡啶基)]四唑为桥联配体，分别与Cu(ClO)₂·6H₂O和CdCl₂的水溶液反应，获得配聚物[Cu(a4-ptz)₂·2H₂O]_n (1)和[{Cd(a4-ptz)·(H₂O)₂Cl}·H₂O]_n (2)，2个化合物通过元素分析、IR、TGA等表征，并测定了它的晶体结构。结果表明：化合物1是一个二维四方格子结构的配位聚合体，化合物2含有四元环(Cd₂Cl₂)的一维Z-型聚合链。化合物2在280 ℃以下热稳定性好，并且不溶于一般溶剂，因此可成为潜在的荧光材料。     

Insertion of CO2, CS2, and COS into iron(II)-hydride bonds

The reactions between cis-Fe(dmpe)2H2 (dmpe = Me2PCH2CH2PMe2) (1) or cis-Fe(PP3)H2 (PP3 = P(CH2CH2PMe2)3) (2) and carbon dioxide (CO2), carbon disulfide (CS2), and carbonyl sulfide (COS) are investigated. At 300 K, additions of CO2 (1 atm), CS2 (2 equiv), and COS (1 atm) to 1 result in the formation of a stable transformato hydride, trans-Fe(dmpe)2(OCHO)H (3a), a trans-dithioformato hydride, trans-Fe(dmpe)2(SCHS)H (4a), and a trans-thioformato hydride, trans-Fe(dmpe)2(SCHO)H (5a), respectively. When CS2 and COS are added to cis-Fe(dmpe)2H2 at 195 K, a cis-dithioformato hydride, 4b, and a cis-thioformato hydride, 5b, respectively, are observed as the initially formed products, but there is no evidence of the corresponding cis-formato hydride upon addition of CO2 to cis-Fe(dmpe)2H2. Additions of excess CO2, CS2, and COS to 1 at lower temperatures (195-240 K) result in the formation of a trans-bis(formate), trans-Fe(dmpe)2(OCHO)2 (3b), a trans-bis(dithioformate), trans-Fe(dmpe)2(SCHS)2 (4c), and a cis-bis(thioformate), cis-Fe(dmpe)2(SCHO)2 (5c), respectively. trans-Fe(dmpe)2(SCHO)2 (5d) is prepared by the addition of excess COS at 300 K. Additions of CO2 (1 atm), CS2 (0.75 equiv), and COS (1 atm) to 2 at 300 K result in the formation of a thermally stable, geometrically constrained cis-formato hydride, cis-Fe(PP3)(OCHO)H (6a), a cis-dithioformato hydride, cis-Fe(PP3)(SCHS)H (7a), and a cis-thioformato hydride, cis-Fe(PP3)(SCHO)H (8a), respectively. Additions of excess CO2 and COS to 2 yield a cis-bis(formate), cis-Fe(PP3)(OCHO)2 (6b), and a thermally stable cis-bis(thioformate), cis-Fe(PP3)(SCHO)2 (8b), respectively. All complexes are characterized by multinuclear NMR spectroscopy, with IR spectroscopy and elemental analyses confirming structures of thermally stable complexes where possible. Complexes 3b and 5a are also characterized by X-ray crystallography.     

氧化锆担载镍甲烷干重整催化剂的载体形貌效应

煤层气是储量十分丰富的煤炭伴生资源,也是煤炭开采中最大的安全隐患之一,同时还是重要的温室气体.研究煤层气的高效、清洁资源化利用具有资源和环境双重意义.因此,世界主要产煤国均十分重视煤层气的开发和利用.煤层气的主要成分是甲烷,目前主要通过两种方式实现其资源化利用:(1)直接转化,主要通过氧化偶联、催化氧化官能团化或脱氢芳构化等途径将其转化为高碳烃、含氧化合物及芳烃等;(2)间接转化,甲烷首先经催化重整反应制取合成气,而后再经Fischer-Tropsch合成、甲醇化和氢甲酰化等过程来合成饱和烃、烯烃、甲醇及其他含氧化物.对于前者,由于热力学限制,反应收率很低,应用前景较差,而经由合成气这一平台产物的间接转化路线被认为是一条甲烷资源化利用颇具工业前景的转化路线.因此,甲烷催化重整制合成气备受关注.研究表明,贵金属具有较好的甲烷重整催化性能,但其储量有限、价格昂贵的内在缺陷不利于甲烷大规模转化和资源化利用.Ni基催化剂具有与贵金属可比的催化活性和选择性,且其储量丰富,价格低廉,因此在甲烷重整反应中备受青睐.但是,相对于贵金属,Ni基催化剂易于积碳和烧结失活,这已成为制约其大规模工业化应用的瓶颈.迄今,大量文献报道关注如何提高Ni基催化剂的催化稳定性.而载体形貌调控是调节负载型催化剂的有效途径.本文开展了用作载Ni催化剂的氧化锆载体的形貌调控研究,以期可以有效调节载Ni催化剂的物化性质,进而调控载Ni催化剂的甲烷重整催化性能.采用水热法成功制备了松球状和鹅卵石状的单斜相氧化锆载体,进一步负载镍,制备了载镍催化剂,用于甲烷重整制合成气反应.具有分级结构的松球状氧化锆载Ni催化剂(Ni/ZrO2-ipch)展示出比鹅卵石状氧化锆和常规氧化锆纳米粒子载Ni催化剂显著好的催化活性和稳定性.采用XRD、N2吸附、TEM、H2-TPR、CO化学吸附、CO2-TPD、XPS和TGA等手段研究了松球状氧化锆载Ni催化剂高催化活性和稳定性的原因和机制.发现,其较高的催化活性主要归因于高的Ni分散度、改善的可还原性、促进的氧流动性以及较多的碱性位和较强的碱性,这些物化性质依赖于氧化锆载体的独特形貌.分级结构的松球状氧化锆载Ni催化剂高的甲烷重整催化稳定性主要源于催化剂的高抗烧结、抗积碳性能.加强的金属载体效应和介孔限域效应可以阻止金属Ni的高温烧结,而优良的抗积碳稳定性主要源于催化剂良好的氧流动性、较多的碱性位、较强的碱性以及小的Ni粒子尺寸.鉴于分级结构松球状氧化锆载Ni催化剂高的催化活性和优良的抗积碳、抗烧结稳定性,该催化剂用于甲烷重整制合成气具有广阔前景.而所制备的分级结构松球状氧化锆由于具有独特的结构和优良的热稳定性,可以作为性能优良的载体用于其他反应,尤其对于高温转化过程可望表现出明显优势.     

Sequential reaction intermediates in aliphatic C-H bond functionalization initiated by a bis(mu-oxo)dinickel(III) complex

The reaction of [Ni2(OH)2(Me2-tpa)2]2+ (1) (Me2-tpa = bis(6-methyl-2-pyridylmethyl)(2-pyridylmethyl)amine) with H2O2 causes oxidation of a methylene group on the Me2-tpa ligand to give an N-dealkylated ligand and oxidation of a methyl group to afford a ligand-based carboxylate and an alkoxide as the final oxidation products. A series of sequential reaction intermediates produced in the oxidation pathways, a bis(mu-oxo)dinickel(III) ([Ni2(O)2(Me2-tpa)2]2+ (2)), a bis(mu-superoxo)dinickel(II) ([Ni2(O2)2(Me2-tpa)2]2+ (3)), a (mu-hydroxo)(mu-alkylperoxo)dinickel(II) ([Ni2(OH)(Me2-tpa)(Me-tpa-CH2OO)]2+ (4)), and a bis(mu-alkylperoxo)dinickel(II) ([Ni2(Me-tpa-CH2OO)2]2+ (5)), was isolated and characterized by various physicochemical measurements including X-ray crystallography, and their oxidation pathways were investigated. Reaction of 1 with H2O2 in methanol at -40 degrees C generates 2, which is extremely reactive with H2O2, producing 3. Complex 2 was isolated only from disproportionation of the superoxo ligands in 3 in the absence of H2O2 at -40 degrees C. Thermal decomposition of 2 under N2 generated an N-dealkylated ligand Me-dpa ((6-methyl-2-pyridylmethyl)(2-pyridylmethyl)amine) and a ligand-coupling dimer (Me-tpa-CH2)2. The formation of (Me-tpa-CH2)2 suggests that a ligand-based radical Me-tpa-CH2* is generated as a reaction intermediate, probably produced by H-atom abstraction by the oxo group. An isotope-labeling experiment revealed that intramolecular coupling occurs for the formation of the coupling dimer. The results indicate that the rebound of oxygen to Me-tpa-CH2* is slower than that observed for various high-valence bis(mu-oxo)dimetal complexes. In contrast, the decomposition of 2 and 3 in the presence of O2 gave carboxylate and alkoxide ligands, respectively (Me-tpa-COO- and Me-tpa-CH2O-), instead of (Me-tpa-CH2)2, indicating that the reaction of Me-tpa-CH2* with O2 is faster than the coupling of Me-tpa-CH2* to generate ligand-based peroxyl radical Me-tpa-CH2OO*. Although there is a possibility that the Me-tpa-CH2OO* species could undergo various reactions, one of the possible reactive intermediates, 4, was isolated from the decomposition of 3 under O2 at -20 degrees C. The alkylperoxo ligands in 4 and 5 can be converted to a ligand-based aldehyde by either homolysis or heterolysis of the O-O bond, and disproportionation of the aldehyde gives a carboxylate and an alkoxide via the Cannizzaro reaction.     

PRODUCTION OF LIGHT OLEFINS FROM CO2 HYDROGENATION OVER Fe/SILICALITE-2 CATALYST. I.CATALYTIC REACTIVI-FY AND REACTION MECHANISM

K-Fe-MnO/Silicalite-2 is a desirable catalyst for the production of light olefins from CO2 hydrogenation The activity can be improved greatly with increasing the Fe loading, and the selectivities to hydrocarbons rise with Fe loading increase However, an ambiguous effect of Fe loading on the selectivity of light olefin in hydrocarbon products is observed. The CO2 hydrogenation containing a two-step mechanism CO2+H2=CO+H2O, a reversible water gas shift reaction, and CO+(m/2n+1)H2 =1/nCnHm+H2O2, a Frscher-Tropsch reaction, is suggested by the results of CO2-TPD and CO2/H2-TPSR as well as CO/H2-TPSR characterizations.     

Trisilane-1,3-diolato complexes of Ti and Zr: syntheses and X-ray crystal structures

The syntheses and structures of zirconium and titanium complexes containing the novel chelating trisilane-1,3-diolate ligand [Me2Si(R2SiO)2]2- (R = SiMe3) (5)-H2 are reported. The chloride complexes [Me2Si(R2SiO)2]TiCl2 (7a) and [Me2Si(R2SiO)2]ZrCl2 x 2 THF (7b) were prepared by the reaction of MCl4 (M = Ti, Zr) with [Me2Si(R2SiO)2]2Ti (6a) and [Me2Si(R2SiO)2]2Zr (6b), which are derived from the reaction of 5 with M(NEt2)4, respectively. In the presence of TiCl4, complexes 6a and 7a undergo a ring-opening reaction to produce the dinuclear complex [Me2Si(R2SiO)2][TiCl3]2 (9). [Me2Si(R2SiO)2]TiMe2 (10) and [Me2Si(R2SiO)2]TiBnz2 (11) were prepared in moderate yields from reactions of 7a with 2 equiv of MeMgBr and BnzMgCl, respectively. According to NMR spectroscopic investigations, the reaction of the dimethyltitanium complex 10 with B(C6F5)3 led to full exchange of both methyl groups by C6F5 groups under quantitative formation of [Me2Si(R2SiO)2]Ti(C6F5)2 (12) and a mixture of B(C6F5)(3-n)Me(n), where n = 1-3. The structure of 12 is further evidenced by the preparation of an identical sample from the reaction of 7a with 2 equiv of C6F5MgBr. Refluxing an ether solution of 12 surprisingly gave [Me2Si(R2SiO)2]2TiC6F5]2O (13) as a result of ether cleavage. The structures of the complexes 7a, 7b, 9, 10, and 13 were determined by X-ray crystallography, and structural discussion of the bond parameters will be given.     

直接由SiO_2低温合成含硅聚氨酯及其结构表征

有机硅材料是一类应用非常广泛的材料,但这些产品所用基本原料几乎都来源于石英沙(SiO2)的高温碳热还原[1],这个方法已大规模的工业化,但它的高能耗、高腐蚀成为人们越来越关注的问题.1991年美国Laine[2]直接以SiO2为原料成功地制备了五配位、六配位有机硅化合物,并进一步合成了导电材料和高性能陶瓷[3～7].我们实验室自1995年以来,在Laine的基础上,发现如果以沙子为原料,则产率非常低,即使在超声波作用下,反应一周合成的五配位硅化合物其产率不足10%,这可能是由于沙子的晶型非常完美,在200℃下很难打破Si-O键生成配位硅,如果以无定型SiO2为原料(如白碳黑,稻壳灰等),合成的五配位硅其产率几乎为100%,而且反应时间缩短为4h.然后以高活性的五配位硅为原料制备了一系列的含硅有机物,如与环氯丙烷反应[8],不仅消除了五配位硅化合物的水解可逆性反应,中和了它的强碱性,而且把环氧基团接到了配位硅化合物上,生成了一种非常类似于液态环氧树脂的淡黄色的粘稠状液体.我们按Laine的路线,向含硅聚合物方向发展[9].本文合成的双羟基四配位硅单体是五配位硅钾化合物向含硅聚合物转化的关键,由于其结构带有两个活泼羟基,可以和二元酰氯、二元羧酸、二异氰酸酯、导氰酸酯基封端的聚醚或异氰酸酯基封端的聚酯进行缩聚反应,合成主连含硅的聚合物.     

Reversible intramolecular C-C bond formation/breaking and color switching mediated by a N,C-chelate in (2-ph-py)BMes2 and (5-BMes2-2-ph-py)BMes2

A diboron compound with both 3-coordinate boron and 4-coordinate boron centers, (5-BMes2-2-ph-py)BMes2 (1) and its monoboron analogue, (2-ph-py)BMes2 (2) have been synthesized. Both compounds are luminescent but have a high sensitivity toward light. UV and ambient light cause both compounds to isomerize to 1a and 2a, respectively, via the formation of a C-C bond between a mesityl and the phenyl group, accompanied by a drastic color change from yellow or colorless to dark olive green or dark blue. The structures of 1a and 2a were established by 2D NMR experiments and geometry optimization by DFT calculations. Both 1a and 2a can thermally reverse back to 1 and 2 via the breaking of a C-C bond, with the activation barrier being 107 and 110 kJ/mol, respectively. The N,C-chelate ligands in 1 and 2 were found to play a key role in promoting this unusual and reversible photo-thermal isomerization process on a tetrahedral boron center. Reactions with oxygen molecules convert 1a and 2a to 5-BMes2-2-[(2-Mes)-ph]-pyridine (1b) and 2-(2-Mes)-ph-pyridine (2b), respectively.     

不对称合成 ⅩⅥ.(十)-樟脑亚胺的立体控制反应和樟脑结构的研究——(十)-樟脑缩苄胺转动势能计算和构象分析

本文对N-(对-硝基)苄基-1,7,7-三甲基-双环[2.2.1]庚烷-2-亚胺(3)和N-[11—[12-羟基-12-二苯基]甲基]苄基-1,7,7-三甲基-双环[2.2.1]庚烷-2-亚胺(4)进行了X-射线晶体结构分析。采用MOPAC程序的MNDO方法对(+)-樟脑缩苄胺即N-苄基-1,7,7-三甲基-双环[2.2.1]庚烷-2-亚胺(2a)的内部转动势能进行了理论计算。结果表明,(+)-樟脑缩苄胺(2a)以反式(trans)构象形式存在,它在不对称反应中的立体选择性主要受樟脑环上方C10甲基的控制。     

Reactivity of rhodium-triflate complexes with diphenylsilane: evidence for silylene intermediacy in stoichiometric and catalytic reactions

Addition of Ph2SiH2 to [Rh(iPr3P)2(OTf)] (1) yielded the thermally unstable RhIII adduct [Rh(iPr3P)2(OTf)(H)(SiPh2H)] (2), which decomposed to [Rh(iPr3P)2(H)2(OTf)] (3), liberating (unobserved) silylene. The silylene was trapped by 1, resulting in the RhI-silyl complex [Rh(iPr3P)2(SiPh2OTf)]. Complex 3 was converted to 2 by addition of diphenylsilane, providing a basis for a possible catalytic cycle. The last reaction did not involve a RhI intermediate, as shown by a labeling study. Complex 1 catalyzed the dehydrogenative coupling of Ph2SiH2 to Ph2HSi--SiHPh2. A mechanism involving a silylene intermediate in this catalytic cycle is proposed. The mechanism is supported by complete lack of catalysis in the case of the tertiary silanes Ph2MeSiH and PhMe2SiH, and by a study of individual steps of the catalytic cycle. The outcome of the reaction of Ph2SiH2 with styrene in the presence of 1 depends on the complex/substrate ratio; under stoichiometric conditions olefin hydrogenation prevailed over hydrosilylation, whereas with excess of substrates hydrosilylation prevailed. Catalytic hydrosilylation resulted in double addition giving Ph2Si(CH2CH2Ph)2. Mechanistic aspects of the reported processes are discussed, and a new hydrosilylation mechanism based on silylene intermediacy is proposed.     

杂元素冠醚研究 Ⅶ.多硒杂冠醚及其钯配合物的合成

在碱性条件下,1,2-二硒杂环戊烷被硼氢化钠还原成双硒负离子,然后和二醇的二对甲苯磺酸酯或二氯化物缩合成环,得到六个二硒杂冠醚(2a,3a,4a,5a,6a,7a)和七个四硒杂冠醚(2b,3b,4b,5b,6b,7b,8b).同时,通过5a,5b与二氯化钯反应,合成了两个钯配合物,并讨论了其配位特征     

Amide-silyl ligand exchanges and equilibria among group 4 amide and silyl complexes

M(NMe2)4 (M = Zr, 1a; Hf, 1b) and the silyl anion (SiButPh2)- (2) in Li(THF)2SiButPh2 (2-Li) were found to undergo a ligand exchange to give [M(NMe2)3(SiButPh2)2]- (M = Zr, 3a; Hf, 3b) and [M(NMe2)5]- (M = Zr, 4a; Hf, 4b) in THF. The reaction is reversible, leading to equilibria: 2 1a (or 1b) + 2 2 <--> 3a (or 3b) + 4a (or 4b). In toluene, the reaction of 1a with 2 yields [(Me2N)3Zr(SiButPh2)2]-[Zr(NMe2)5Li2(THF)4]+ (5) as an ionic pair. The silyl anion 2 selectively attacks the -N(SiMe3)2 ligand in (Me2N)3Zr-N(SiMe3)2 (6a) to give 3a and [N(SiMe3)2]- (7) in reversible reaction: 6a + 2 2 <--> 3a + 7. The following equilibria have also been observed and studied: 2M(NMe2)4 (1a; 1b) + [Si(SiMe3)3]- (8) <--> (Me2N)3M-Si(SiMe3)3 (M = Zr, 9a; Hf, 9b) + [M(NMe2)5]- (M = Zr, 4a; Hf, 4b); 6a (or 6b) + 8 <--> 9a (or 9b) + [N(SiMe3)2]- (7). The current study represents rare, direct observations of reversible amide-silyl exchanges and their equilibria. Crystal structures of 5, (Me2N)3Hf-Si(SiMe3)3 (9b), and [Hf(NMe2)4]2 (dimer of 1b), as well as the preparation of (Me2N)3M-N(SiMe3)2 (6a; 6b) are also reported.     

Co—MgO催化剂上NO—程序升温表面反应和NO—CH4反应

ＮＯ，程序升温表面反应（ＴＰＳＲ），ＮＯ－ＣＨ４反应，Ｃｏ－ＭｇＯ     

芥子气模拟剂2-氯乙基乙基硫醚的光催化降解

利用连续流动微反、原位红外和GC/MS等手段考察了芥子气模拟剂2-氯乙基乙基硫醚（2-CEES）在P25 TiO2上的光催化降解反应,证实CO2和H2O是这个反应的最终产物.详细的跟踪分析表明,除了CO2和H2O外,在反应的气相混合物中可检测到C2H4、CH3CHO、CH4、CO、HCl和H2S；少量小分子的羧酸、醚和砜；微量C2H5SC2H5、C2H5S2C2H5、C2H5SC2H4Cl和CH2ClCH2Cl等中间产物;在反应后的催化剂表面可检测到C2H5S2C2H5、C2H5SC2H4OH、C4H9S2C2H5和C2H5S2C2H4OH、等物.根据这些结果提出了2-CEES光催化降解的反应机理,推断2-CEES的光催化降解涉及脱氯、C－S键断裂、有机硫化物光聚合和裂解等复杂过程最终转化为CO2和H2O.认为各种硫物种在表面的积聚引起了催化剂的缓慢失活.     

Experimental and theoretical investigations of the redox behavior of the heterodichalcogenido ligands [(EP(i)Pr2)(TeP(i)Pr2)N](-) (E = S, Se): cyclic cations and acyclic dichalcogenide dimers

The two-electron oxidation of the lithium salts of the heterodichalcogenidoimidodiphosphinate anions [(EP (i)Pr 2)(TeP (i)Pr 2)N] (-) ( 1a, E = S; 1b, E = Se) with iodine yields cyclic cations [(EP (i)Pr 2)(TeP (i)Pr 2)N] (+) as their iodide salts [(SP (i)Pr 2)(TeP (i)Pr 2)N]I ( 2a) and [(SeP (i)Pr 2)(TeP (i)Pr 2)N]I ( 2b). The five-membered rings in 2a and 2b both display an elongated E-Te bond as a consequence of an interaction between tellurium and the iodide anion. One-electron reduction of 2a and 2b with cobaltocene produces the neutral dimers (EP (i)Pr 2NP (i)Pr 2Te-) 2 ( 3a, E = S; 3b, E = Se), which are connected exclusively through a Te-Te bond. Two-electron reduction of 2a and 2b with 2 equiv of cobaltocene regenerates the corresponding dichalcogenidoimidodiphosphinate anions as ion-separated cobaltocenium salts Cp 2Co[(EP (i)Pr 2)(TeP (i)Pr 2)N] ( 4a, E = S; 4b, E = Se). The ditellurido analogue Cp 2Co[(TeP (i)Pr 2) 2N] ( 4c) has been prepared in the same manner for comparison. Density functional theory calculations reveal that the preferential interaction of the iodide anion with tellurium is determined by the polarization of the lowest unoccupied molecular orbital [sigma*(E-Te)] of the cations in 2a and 2b toward tellurium and that the formation of the dimers 3a and 3b with a central Te-Te linkage is energetically more favorable than the structural isomers with either E-Te or E-E bonds. Compounds 2a, 2b, 3a, 3b, 4a, 4b, and 4c have been characterized in solution by multinuclear NMR spectroscopy and in the solid state by X-ray crystallography.