含萘环聚醚砜醚酮酮的合成与表征

聚芳醚酮是一类综合性能优异的新型热塑性高分子材料，在高科技领域中获得了广泛的应用［１，２］，研制新型的聚芳醚酮是目前十分活跃的课题［３～７］．本文在亲电缩聚合成聚醚酮酮（ＰＥＫＫ）的基础上［８］，利用合成的新单体—４，４－二（β－萘氧基）二苯砜（Ｂ...     

4,4′-二(2-甲基苯氧基)二苯砜/1,4-二苯氧基苯/对苯二甲酰氯三元共缩聚物的合成与表征

通过加入第三单体4,4′-二(2-甲基苯氧基)二苯砜与1,4-二苯氧基苯(DPB)和对苯二甲酰氯(TPC)进行三元无规共聚,合成了一系列分子主链带砜基和主链芳环上含甲基侧基的聚(芳醚砜醚酮酮-co-醚醚酮酮)共聚物,并用FT-IR、DSC、WAXD和TG对其进行了表征.结果表明,共聚物的玻璃化转变温度随着第三单体摩尔含量的增加而逐渐升高,熔融温度则逐渐降低,当其摩尔含量为10%~30%时,共聚物具有优良的耐热性能及耐溶剂、耐酸碱性能.     

一类侧链型磺化聚芳醚砜质子交换膜的合成及表征

以4,4'-二氟二苯砜和N-溴代丁二酰亚胺为起始原料,经两步有机反应设计并合成了一种新型活性二氟砜单体:3,3'-双(苯氧基苯基)-4,4'-二氟二苯砜,并由该单体与4,4'-二氟二苯砜、4,4'-二羟基二苯甲酮经亲核缩聚合成了侧链型聚芳醚砜聚合物(PAES-xx).通过较温和的后磺化反应,制得了一系列磺化聚芳醚砜质子交换膜(SPAES-xx).对所制侧链型聚芳醚砜质子交换膜的结构和性能分别进行了表征分析.结果表明,该类质子交换膜具有适中的吸水率和较好的尺寸稳定性,80℃时最高质子传导率达0.16 S/cm.此外,该类质子交换膜还具有良好的热稳定性和机械性能,起始分解温度约为250℃;膜的拉伸强度为29.5~42.0MPa,拉伸模量为0.62~1.23 GPa,断裂伸长率在9.0%~31.9%.磺化膜优良的综合性能主要归因于侧链磺化结构的引入和相分离结构的形成.     

聚芳醚砜薄膜的气体透过行为

研究了一系列聚芳醚砜的Ｈ２、ＣＯ２、Ｏ２、Ｎ２和ＣＨ４气体透过性能，讨论了其气体透过的温度依赖性。与双酚Ａ聚砜（ＰＳＦ）相比，几种新型聚芳醚砜的气体透过系数和气体选择系数同时有所提高。通过聚合物的分子链段活动性和自由体积数据系列变化，讨论了气体透过速率与分子结构的关系。     

用于燃料电池质子交换膜材料的磺化聚芳醚酮砜的合成与性能研究

以叔丁基对苯二酚(TBHQ)为双酚单体,1,4-二(4′-氟苯甲酰基)苯,3,3′-二磺酸钠基-4,4′-二氧二苯砜(SDCDPS)为原料,采用亲核缩聚反应,通过调整磺化单体和非磺化单体的比例与叔丁基对苯二酚共聚,合成了一系列具有不同磺化度的聚芳醚酮砜.通过红外光谱(FTIR),TGA,DSC等分析方法对其结构及性能进行了表征.并用TEM对其内部形态进行了研究,建立了结构与性能之间的关系.通过对膜进行综合性能评价发现,磺化度为0.8的磺化聚芳醚酮砜膜的质子传导率在80℃时达到了0.061 S/cm接近了Nafion 117,而且其甲醇渗透系数为3.4×10-7cm2/s远低于Nafion 117,在质子交换膜燃料电池(PEMFC)和直接甲醇燃料(DMFC)电池中表现出了好的应用前景.     

聚醚砜醚酮的合成与性能

以4,4′-二羟基二苯砜和4,4′-二氟二苯酮为单体, 通过溶液缩聚合成了聚醚砜醚酮(PESEK), 其分子结构相当于聚醚砜(PES)与聚醚醚酮(PEEK)的交替共聚物. 在共聚物分子中, 存在砜基、醚基和酮基, 整个结构单元形成了大共轭体系, 聚合物属无定形聚合物, 玻璃化转变温度(Tg)为198 ℃, 介于PEEK和PES的Tg之间, 其热稳定性和加工性能优于PES, 而力学性能与PES接近.     

含萘结构聚芳醚砜的合成与表征

聚芳醚砜;亚萘基;耐热性;溶解度;含萘结构聚芳醚砜的合成与表征     

两种高Tg非线性光学聚合物母体及掺杂,极化的研究

利用具有非线性光学活性的对硝基苯胺掺杂高玻璃化转变温度的聚芳醚砜(PES-C)和聚芳醚酮(PEK-C),得到了两种掺杂含量较高的掺杂型非线性光学聚合物体系。电晕极化表明较高的取向和较慢的松驰。     

4,4’-二氯二苯酮合成二氮杂萘联苯酮结构聚醚砜酮的研究

以4-(4-羟基苯基)*2,3-二氮杂萘-1-酮(DHPZ)、4,4’-二氯二苯砜(DCS)和4,4’-二氯二苯酮(DCK)为原料,采用分步加料的方法,合成了系列高分子量的聚芳醚砜酮共聚物(PPESKs),其特性黏度在0.40 ～0.61dL/g之间,解决了由于DCK活性低不适合用于聚芳醚合成的问题.采用FTIR、示差...     

新型燃料电池质子交换膜──含叔丁基的磺化聚芳醚砜

以3,3'-二磺酸钠基-4,4'-二氯二苯砜(SDCDPS)、叔丁基对苯二酚(TBHQ)、二氟二苯酮(DFBP)为原料,利用亲核缩聚反应,通过调整磺化单体(SDCDPS)和非磺化单体(DFBP)的比例与叔丁基对苯二酚(TBHQ)共聚,合成了不同磺化度的聚芳醚砜.聚合物成膜后的研究结果表明,该膜具有良好的机械性能和电化学性能,可能在质子交换膜燃料电池中得到应用.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.