共查询到20条相似文献,搜索用时 15 毫秒
1.
Phosphate removal from polluted water is crucial to preventing eutrophication. Herein, we present the investigation on phosphate adsorption in aqueous solutions by using lanthanum-doped activated carbon fiber (ACF-La). Various batch sorption conditions, e.g., pH, ionic strength, and temperature were tested, and the adsorption mechanisms were discussed. The sorption capacity of ACF-La was higher in acidic solutions than that in basic ones, suggesting that the Lewis acid-base interaction gradually dominated the adsorption process with the increase in pH values. The degree of phosphate removal decreased with the enhancement of the ionic strength of the solution, meaning that the adsorption of phosphate on ACF-La was strongly dependent on ionic strength. Employing the pseudo first- and second-order, and intra-particle diffusion models to evaluate the adsorption kinetics of phosphate onto ACF-La indicated that the second-order model best fits the experimental data. The presence of chloride ion in solutions increased the effect of intra-particle diffusion on the adsorption of phosphate onto ACF-La but reduced the overall rate of the adsorption. The thermodynamic parameters were determined which revealed the feasibility, spontaneity, and endothermic nature of adsorption. 相似文献
2.
In this paper, the sorption of Co(II) from aqueous solution to Ca-montmorillonite was studied under ambient conditions by
using batch technique. The effects of contact time, solid content, pH, ionic strength and temperature on the sorption of Co(II)
to Ca-montmorillonite was also investigated. The results indicated that the sorption of Co(II) was strongly dependent on pH
values. The sorption was dependent on ionic strength at low pH values, but independent of ionic strength at high pH values.
Outer-sphere surface complexes were formed on the surface of Ca-montmorillonite at low pH values, whereas inner-sphere surface
complexes were formed at high pH values. The Langmuir, Freundlich and Dubinin–Radushkevich (D–R) models were used to simulate
the sorption isotherms of Co(II) at three different temperatures. The thermodynamic parameters (Δ H
0, Δ S
0 and Δ G
0) were calculated from the temperature dependent sorption isotherms, and the results indicated that the sorption reaction
of Co(II) to Ca-montmorillonite was an endothermic and spontaneous process. The high sorption capacity of Co(II) on Ca-montmorillonite
suggests that the Ca-montmorillonite is a suitable material for the preconcentration and solidification of radiocobalt from
aqueous solutions. 相似文献
3.
This work aims to contribute to a better understanding of the ionic strength effect on microcystin and natural organic matter (NOM) surrogate adsorption by analyzing the importance of adsorbate molecular size, and surface concentration. Adsorption kinetics and/or isotherms were performed on PAC Norit SA-UF for four microcystin variants (MC-LR, MC-LY, MC-LW, MC-LF), and three NOM surrogates (salicylic acid (SA), tannic acid (TA), Aldrich humic acid (AHA)) at different solution ionic strengths. Results showed that the ionic strength effect depends upon the adsorbate surface concentration, cation charge (mono or divalent), and adsorbate molecular size. Potassium seemed not to affect the MC-LR adsorption, while calcium enhanced MC-LR kinetics and adsorption capacity. K+ and, particularly, Ca2+ improved the adsorption kinetics of the other microcystin variants. For identical surface concentration and ionic strength, the impact of K+ and Ca2+ on NOM surrogates depended on the adsorbate molecular size: K+ effect was only observed for AHA, whereas Ca2+ caused no effect on SA adsorption, slightly enhanced TA adsorption, and greatly enhanced AHA adsorption. MC-LR isotherms with two salt concentrations (KCl or CaCl2) indicated that, for the studied range of equilibrium surface concentration (5.3-18.7 mg/g), an enhanced adsorption regime prevails, and no transition regime was observed. 相似文献
5.
Bentonite has been studied extensively because of its strong adsorption capacity. A local Na-bentonite named GMZ bentonite,
collected from Gaomiaozi County (Inner Mongolia, China), was selected as the first choice of buffer/backfill material for
the high-level radioactive waste repository in China. In this research, the adsorption of La (ΙΙΙ) onto GMZ bentonite was
performed as a function of contact time, pH, solid content and metal ion concentrations by using the batch experiments. The
results indicate that the adsorption of La (III) on GMZ bentonite achieves equilibration quickly and the kinetic adsorption
follows the pseudo-second-order model; the adsorption of La (III) on the adsorbent is strongly dependent on pH and solid content,
the adsorption process follows Langmuir isotherm. The equilibrium batch experiment data demonstrate that GMZ bentonite is
effective adsorbent for the removal of La (III) from aqueous solution with the maximum adsorption capacity of 26.8 mg g −1 under the given experimental conditions. 相似文献
6.
Multiwalled carbon nanotubes (MWCNTs) have attracted intense multidisciplinary study because of their special physicochemical properties. In this paper, the effect of solid content, contact time, pH, temperature and humic acid on radionuclide ( 60Co(II)) on MWCNTs was studied by using batch technique. The results indicate that the sorption of Co(II) on MWCNTs can achieve sorption equilibration in short time and the kinetic sorption can be described by pseudo-second-order model well. The sorption of Co(II) on MWCNTs is strongly dependent on pH and independent of ionic strength, suggesting that the sorption of Co(II) on MWCNTs is mainly dominated by inner-sphere surface complexation rather than by outer-sphere surface complexation or ion exchange. The thermodynamic parameters calculated from the temperature-dependent sorption isotherms indicate that the sorption of Co(II) on MWCNTs was an endothermic and spontaneous process. The results of high sorption capacity of Co(II) suggest that MWCNTs can be used as efficient materials for the preconcentration of radiocobalt from large volumes of aqueous solutions in radionuclide polluted water. 相似文献
7.
Adsorption of Th(IV) (total concentration, 10(-5)-10(-4) mol/L) was studied by a batch technique. The effects of pH, ionic strength, contact time, and phosphate on the adsorption of Th(IV) onto alumina were investigated. Adsorption isotherms of Th(IV) on alumina at approximately constant pH and three ionic strengths (0.05, 0.1, 0.5 mol/L KNO3) were determined. It was found that the pH values of aqueous solutions of both the Th(IV)-alumina and phosphate-alumina adsorption systems increase with increasing contact time, respectively. Adsorption of Th(IV) on alumina steeply increases with increasing pH from 1 to 4.5 and the adsorption edge consists of three regions. The phosphate added clearly enhances Th(IV) adsorption in the pH range 1-4. From the adsorption isotherms at approximately constant pH and three different ionic strengths, a reduced ionic strength effect was observed and is contradictory to the insensitive effect obtained from the adsorption edges on three oxides of Fe, Al, and Si at different ionic strengths. Compared with the adsorption edges at different ionic strengths, the adsorption isotherms at approximately constant pH and different ionic strengths are more advantageous in the investigation of ionic strength effect. The significantly positive effect of phosphate on Th(IV) adsorption onto alumina was attributed to strong surface binding of phosphate on alumina and the subsequent formation of ternary surface complexes involving Th(IV) and phosphate. 相似文献
8.
By the batch method, the effects of contact time, pH, ionic strength, initial concentration, temperature on the sorption of Re(VII) and Se(IV) were investigated. Our results illustrated that Re(VII) and Se(IV) sorption was well described by the pseudo-second-order kinetic model, as well as by Freundlich model. This suggests chemical reaction as a rate-controlling step on the surface with 0.51 and 2.24 mg/g maximum sorption capacity at pH 7.0. The pH has little effect on Re(VII) adsorption, While it significantly affects the Se(IV) sorption. The sorption capacity of Re(VII) and Se(IV) decreased with increasing NaCl concentration. And the adsorption processes of Re(VII) and Se(IV) were endothermic spontaneous processes. What’s more, our results also show that the sorption of Re(VII) and Se(IV) in clay rock will not interfere with each other under various conditions. Additionally, the adsorption capacity of Se(IV) in clay is significantly increased under acidic conditions when organic acids in the solution, but not influenced under neutral and alkaline conditions. 相似文献
9.
In this study, the adsorption of U(VI) from aqueous solution on Na-rectorite was studied as a function of various environmental
conditions such as contact time, pH, ionic strength, soil humic acid (HA)/fulvic acid (FA), solid contents, and temperature
under ambient conditions by using batch technique. The kinetic adsorption is fitted by the pseudo-second-order model very
well. The adsorption of U(VI) on Na-rectorite was strongly dependent on pH and ionic strength. A positive effect of HA/FA
on U(VI) adsorption was found at low pH, whereas a negative effect was observed at high pH. The presence of HA/FA enhanced
the U(VI) adsorption at low pH values, but reduced U(VI) adsorption at high pH. The thermodynamic parameters (Δ H
0, Δ S
0, and Δ G
0) were also calculated from the temperature dependent adsorption isotherms, and the results suggested that the adsorption
of U(VI) on Na-rectorite was a spontaneous and endothermic process. 相似文献
10.
The mesoporous molecular sieves (Al-MCM-41) are synthesized with montmorillonite as silica–alumina source by hydrothermal
method. The application of Al-MCM-41 for the adsorption of Th(IV) from aqueous solution is studied by batch technique. The
effects of contact time, solid content, pH, ionic strength, foreign ions, and temperature are determined, and the results
indicate that the adsorption of Th(IV) to Al-MCM-41 is strongly dependent on pH values but independent of ionic strength.
The adsorption isotherms are simulated by D–R and Freundlich models well. The thermodynamic parameters (Δ H
0, Δ S
0, Δ G
0) are calculated from the temperature dependent adsorption isotherms at 293, 313 and 333 K, respectively, and the results
suggest that the adsorption of Th(IV) on Al-MCM-41 is a spontaneous and endothermic process. Al-MCM-41 is a suitable material
for the preconcentration of Th(IV) from large volumes of aqueous solutions. 相似文献
11.
Journal of Radioanalytical and Nuclear Chemistry - Correction to: J Radioanal Nucl Chem (2011) 287:557–565 相似文献
12.
The adsorption and desorption of pyridinium chloride surfactants on borosilicate glass are studied as a function of the separation between two glass-solution interfaces. Both the adsorption and desorption change exponentially with the separation; the decay is equal to the solution Debye length. Changes in adsorption are smaller at pH 1.8 (near the point of zero charge of glass) than at pH 6. These results are consistent with an electrostatic cause for the changes in adsorption. The magnitude of the adsorption regulation, however, depends on the length of the alkyl chain and the surface excess of the surfactant. Therefore, proximal adsorption in this system depends on the coupling between the long-range electrostatic forces and the short-range chain-chain interactions. The equation of state for the surfactant on a regulating surface is discussed with respect to changes in intersurface separation. 相似文献
14.
Effects of pH, Eu(III) concentration, ionic strength, temperature and humic acid (HA) on Eu(III) sorption to iron oxides were
investigated in detail. The sorption of Eu(III) to iron oxides was significantly dependent on pH and weakly dependent on ionic
strength, and higher temperature was gainful to Eu(III) sorption. In the presence of HA, Eu(III) sorption was enhanced significantly
at low pH; whilst obvious negative effect was observed in higher pH range. Below 12 mg/L HA, HA could obviously enhanced Eu(III)
sorption to iron oxides, nevertheless Eu(III) sorption decreased steeply with increasing HA while HA exceeded 12 mg/L. The
results were helpful for understanding radionuclides behaviors in natural environment. 相似文献
15.
A series of copolymers of acrylic acid, N‐isopropylacrylamide (NIPAM), and cinnamoyloxyethyl acrylate were synthesized and studied. The polymers were responsive to four stimuli: UV light, temperature, pH, and ionic strength. The polymeric cinnamoyl chromophores underwent efficient photodimerization with concomitant photocrosslinking of the polymeric micelles. Because of the content of NIPAM, the terpolymers displayed a lower critical solution temperature, which could be controlled by the polymer composition, pH, and ionic strength. The ability to respond to the pH resulted from the content of acrylic carboxyl groups, which became protonated at low pHs. The changes in the polymer properties due to the application of the aforementioned stimuli were studied with pyrene and perylene as fluorescent probes. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3879–3886, 2004 相似文献
16.
In this paper, the LCD (ligand charge distribution) model is applied to describe the adsorption of (Tongbersven) humic acid (HA) to goethite. The model considers both electrostatic interactions and chemical binding between HA and goethite. The large size of HA particles limits their close access to the surface. Part of the adsorbed HA particles is located in the compact part at the goethite surface (Stern layers) and the rest in the less structured diffuse double layer (DDL). The model can describe the effects of pH, ionic strength, and loading on the adsorption. Compared to fulvic acid (FA), adsorption of HA is stronger and more pH- and ionic-strength-dependent. The larger number of reactive groups on each HA particle than on a FA particle results in the stronger HA adsorption observed. The stronger pH dependency in HA adsorption is related to the larger number of protons that are coadsorbed with HA due to the higher charge carried by a HA particle than by a FA particle. The positive ionic-strength dependency of HA adsorption can be explained by the conformational change of HA particles with ionic strength. At a higher ionic strength, the decrease of the particle size favors closer contact between the particles and the surface, leading to stronger competition with electrolyte ions for surface charge neutralization and therefore leading to more HA adsorption. 相似文献
18.
The surface property of attapulgite was investigated by N 2-BET surface area and zeta potential analysis in this paper. Solution pH had a remarkable effect on the sorption process, indicated an inner-sphere complexation. Humic acid (HA) in the solution enhanced U(VI) sorption significantly at pH?<?5.0, while decreased U(VI) sorption obviously at pH?>?9.0. The characteristic fluorescence changes of HA indicated that a strong chemical reaction occurred between the functional groups in HA and UO 22+. The sorption was a spontaneous and endothermic process with increased entropy, and the increase in temperature would benefit the sorption. 相似文献
19.
The sorption of U(VI) from aqueous solution on MX-80 bentonite was studied as a function of contact time, pH, ionic strength,
solid contents, humic acid (HA), fulvic acid (FA) and temperature under ambient conditions using batch technique. The results
indicate that sorption of U(VI) on MX-80 bentonite is strongly dependent on pH and ionic strength. The removal of U(VI) to
MX-80 bentonite is rather quick and the kinetic sorption data is simulated well by a pseudo-second-order rate equation. The
presence of HA enhances the sorption of U(VI) on MX-80 bentonite obviously, but the influence of FA on U(VI) sorption is not
obvious. The thermodynamic parameters (Δ H
0, Δ S
0, and Δ G
0) for the sorption of U(VI) calculated from temperature dependent sorption suggest that the sorption reaction is endothermic
and spontaneous. 相似文献
20.
Although several investigations have been reported on the effect of pH or ionic strength on protein adsorption, most of them have been carried out with protein monolayers and not with single molecules. We have used atomic force microscopy to image, in phosphate buffer, single fibrinogen molecules adsorbed on mica and compare the surface coverage at variable pH (7.4, 5.8, 3.5) or ionic strength (15, 150, 500 mM) conditions. The images obtained and the statistical analysis of the surface coverage indicate adsorption enhancement at the IEP of fibrinogen (pH 5.8) and minimum adsorption at pH 3.5. On the other hand, more protein was adsorbed when the salt concentration of the buffer at pH 7.4 was increased from 15 to 150 mM. However, further increase of salt concentration up to 500 mM resulted in decreased adsorption. To confirm the aforementioned results an approaching bare Si(3)N(4) tip was used as an electrostatic analogue to a protein molecule and interaction force curves between it and the substrate were recorded. The results were in consistence with the double layer theory which justifies the screening of electrostatic repulsion as the salt concentration increases. 相似文献
|