A validated stability-indicating LC method for simultaneous determination of quinapril and hydrochlorothiazide in pharmaceutical samples

A stability-indicating liquid chromatographic method was developed and validated for simultaneous determination of quinapril and hydrochlorothiazide in drug substances and dosage forms. Chromatographic separation of quinapril, hydrochlorothiazide and its degradation products was achieved on a RP-18 column, using acetonitrile and phosphate buffer (pH 4.6) as mobile phase in a gradient mode and detection at 216 nm. Stress testing was performed under hydrolytic, oxidative, thermal and photolytic conditions. The degradation products were well resolved from main peaks, proving the stability-indicating power of the method. The assay was linear for quinapril and hydrochlorothiazide concentrations of 40–200 µg mL^?1 and 25–125 µg mL^?1, respectively. The developed method was selective, accurate and precise for quinapril and hydrochlorothiazide determination. This method was used to quantify both drugs in combined commercial tablets. The results showed that the proposed method was found to be suitable for quantitative determination and the stability study of quinapril and hydrochlorothiazide in pharmaceutical samples.      

Development of a nanocomposite system and its application in biosensors construction

The present work describes the development of a nanocomposite system and its application in construction of a new amperometric biosensor applied in the determination of total polyphenolic content from propolis extracts. The nanocomposite system was based on covalent immobilization of laccase on functionalized indium tin oxide nanoparticles and it was morphologically and structural characterized. The casting of the developed nanocomposite system on the surface of a screen-printed electrode was used for biosensor fabrication. The analytical performance characteristics of the settled biosensor were determined for rosmarinic acid, caffeic acid and catechol (as laccase specific substrate). The linearity was obtained in the range of 1.06×10^?6 ? 1.50×10^?5 mol L^?1 for rosmarinic acid, 1.90×10^?7 ? 2.80×10^?6 mol L^?1 for caffeic acid and 1.66×10^?6 ? 7.00×10^?6 mol L^?1 for catechol. A good sensitivity of amperometric biosensor 141.15 nA µmol^?1 L^?1 and fair detection limit 7.08×10^?8 mol L^?1 were obtained for caffeic acid. The results obtained for polyphenolic content of propolis extracts were compared with the chromatographic data obtained by liquid-chromatography with diode array detection.      

Voltammetric behavior and quantitative determination of ambazone concentrations in urine and in a pharmaceutical formulation

The use of square wave adsorptive stripping voltammetry (SWAdSV) in conjunction with a cyclic renewable silver amalgam film electrode (Hg(Ag)FE) for the analytical determination of ambazone in urine samples and pharmaceutical formulations is described. A single reduction peak in Britton-Robinson buffer at pH 4.0 was detected at about ?1.4 V versus Ag/AgCl. Mechanistic studies have shown that the compound can act as an electrocatalyst. The method was validated. The analytical curve was linear in the concentration range from 1.0×10^?9 to 1.0×10^?7 mol L^?1. The detection and quantification limits were found to be 3.0×10^?10 mol L^?1 and 1.0×10^?9 mol L^?1, respectively. The proposed method was successfully applied to ambazone determination in real samples.      

Optimization methodology based on neural networks and genetic algorithms applied to electro-coagulation processes

An optimization methodology based on neural networks and genetic algorithms was developed and used to optimize a real world process — an electro-coagulation process involving three pollutants at different concentrations: kaolin (250–1000 mg L^?1), Eriochrome Black T solutions (50–200 mg L?1), and oil/water emulsion (1500–4500 mg L^?1). Feed-forward neural networks using heterogeneous combination of transfer functions were developed, leading to good results in the validation stage (relative error about 8%). The parameters of the process (concentration of pollutant, time, pH₀, conductivity and current density) were optimized handling the genetic algorithm parameters, in order to obtain a maximum removal efficiency for each pollutant. Therefore, the optimization methodology combines neural networks as modeling tools with genetic algorithms as solving method. Validation of the optimization results using supplementary experimental data reveals errors under 11%.      

Supramolecular complexes of podand ligands with xenon

Formation of stable complexes between xenon and podand polyoxyethylene ligands was ascertained. The complexation process was studied by ¹²⁹Xe NMR titration, NMR diffusiometry and heteronuclear NOE measurements. The ligands studied form a 1:1 complexes with Xe(0). Their stability constants depend on the ligand structure, i.e., polyoxyethylene chain length, number of complexating polyether units and the topology of the anchoring centre.      

The first synthesis of 3-deoxyoripavine and its utilization in the preparation of 10-deoxyaporphines and cyprodime

The synthesis of 3-deoxyoripavine (7) was realized as a novel and promising intermediate towards the synthesis of the important class of dopaminergic and/or serotonergic 10-deoxyaporphines and the special pharmacological tool µ opioid antagonist cyprodime. Generally, the preparation of these valuable biologically active compounds was achieved in remarkable yields.      

Organoruthenium(II) thiosemicarbazone complexes: synthesis, spectral characterization, DNA binding and DNA cleavage studies

A series of new ruthenium(II) complexes were synthesized with Schiff bases derived from salicylaldehyde / o-hydroxyacetophenone/ o-vanillin / 2-hydroxy-1-naphthaldehyde with thiosemicarbazide and acetyl furan. They are characterized by elemental analysis, IR, electronic, ¹H NMR, ¹³C NMR and mass spectral studies. The elemental analysis suggests the stoichiometry to be 1:1 (metal:ligand). Four of these complexes were tested for its binding with CT-DNA using absorption spectroscopic studies and two of these complexes exhibit efficient DNA cleavage activity.      

Differential pulse adsorptive stripping voltammetric determination of methotrexate using a functionalized carbon nanotubes-modified glassy carbon electrode

A glassy carbon electrode (GC) containing multiwalled functionalized carbon nanotubes (MWCNTs) immobilized within a dihexadecylhydrogenphosphate film (DHP) is proposed as a nanostructured platform for determination of methotrexate (MTX) concentration (a drug used in cancer treatment) using differential pulse adsorptive stripping voltammetry (DPAdSV). The voltammograms for a MTX solution using MWCNTs-DHP/GC electrode presented an oxidation peak potential at 0.98 V vs. Ag/AgCl (3.0 mol L^?1 KCl) in a 0.1 mol L^?1 sulphuric acid. The apparent heterogeneous electron transfer rate constant of 0.46 s^?1 was calculated. The recovery area of 2.62×10^?9 mol cm² was also obtained. Under the optimal experimental conditions, the analytical curve was linear in the MTX concentration range from 5.0×10^?8 to 5.0×10^?6 mol L^?1, with a detection limit of 3.3×10^?8 mol L^?1. The MWCNTs-DHP/GC electrode can be easily prepared and was applied for the determination of MTX in pharmaceutical formulations, with results similar to those obtained using a high-performance liquid chromatography comparative method.      

Determination of lead in solution by solid phase extraction, elution, and spectrophotometric detection using 4-(2-pyridylazo)-resorcinol

Lead (+2) was selectively adsorbed on a solid phase extraction (SPE) gel (molecular recognition technology, MRT), quantitatively extracted, and spectrophotometrically determined as the Pb(II)-PAR (4-(2-pyridylazo)-resorcinol) complex. The linear range was 0.01 to 0.75 mg L^?1 and the detection limit was 6.4 µg L^?1. The MRT-SPE allows selective Pb(II) extraction from complex ion-rich matrices, which is difficult with other techniques. Interference from common matrix ions such as Fe²⁺, Ni²⁺, Cu²⁺ or Co²⁺ is minimized.      

Stereoselective preparation of mono- and bis-derivatives of pentacyclo[6.3.0.02,6.03,10.05,9] undecane (D 3-trishomocubane)

The rearrangement of easily accessible Cookson’s diketone with chlorosulfonic acid in chloroform followed by the acidic hydrolysis gave 6-chloro-7-hydroxy-dichloropentacyclo[6.3.0.0^2,6.0^3,10.0^5,9]undecane-4-one, whose syn-stereochemistry was assigned through the X-ray crystal structure analysis. This key structure was used for the stereoselective synthesis of the D ₃-trishomocubane derivatives as well as for the preparation of potential drugs bearing hydroxy- and amino-functional groups. A new multigram preparative synthesis of D ₃-trishomocubane was developed.      

Heterogeneous oligomerization catalysts: properties and efficiency

A number of heterogeneous acid type catalysts of silica-alumina nature, which are proposed to be used for petrochemistry by-product oligomerization, have been investigated. Particularly, such key indicators as active site concentration and strength have been determined. These parameters have been determined by the method based on potentiometric titration that is relatively seldom used in heterogeneous catalysis. The number of active site types present in investigated catalysts, as well as concentrations of each type of site, has been determined by mathematical processing of potentiometric titration data. The sequence of mathematical processing of titration data is described. The relationship between the properties of the investigated catalysts and their effectiveness in heterogeneous catalytic cooligomerization of the C₉ fraction of liquid products of diesel fuel pyrolysis has been analyzed. The relationships between yields achieved in the presence of various catalysts and the properties of these catalysts have been defined. Namely, it was determined that the product yield is almost proportional to the active site??s concentration of the catalysts (activated clay materials). The relationship between the strength of active sites and average molecular weight of the cooligomers has been found. The causes of obtained regularities have been analyzed and explained.      

Enantioselective Michael additions of aldehydes to nitroalkenes catalyzed with ionically tagged organocatalyst

Enantioselective organocatalytic Michael additions affords useful building blocks for many biologically and medicinally relevant compounds. Ionically-tagged diphenylprolinol silyl ether efficiently catalyzes several Michael additions of aldehydes to nitroalkenes in ionic liquids. The Michael additions work well in ionic liquids; yields up to 95% and enantioselectivities up to 95% ee were achieved. Furthermore, in some cases, the catalytic system was reusable.      

Sensitive and fast determination of papaverine by adsorptive stripping voltammetry on renewable mercury film electrode

The renewable mercury film electrode, applied for the determination of papaverine traces using differential pulse adsorptive stripping voltammetry (DP AdSV) is presented. The calibration graph obtained for papaverine is linear from 1.25 nM (0.42 µg L^?1) to 95 nM (32.2 µg L^?1) for a preconcentration time of 60 s, with correlation coefficient of 0.998. For the renewable mercury electrode (Hg(Ag)FE) with a surface area of 9.1 mm² the detection limit for a preconcentration time of 60 s is 0.7 nM (0.24 µg L^?1). The repeatability of the method at a concentration level of the analyte as low as 17 µg L^?1, expressed as RSD is 3.3% (n=5). The proposed method was successfully applied and validated by studying the recovery of papaverine from drugs, urine and synthetic solution.      

Activated carbon from bamboo waste modified with iron and its application in the study of the adsorption of arsenite and arsenate

Activated carbon obtained from bamboo waste was synthesised and modified with iron (BAC-Fe) and used for the removal of arsenic from aqueous solutions. Two different adsorption models were used for analysing the data. The adsorption capacities were determined for BAC-arsenite, BAC-Fe-arsenite, BAC-arsenate and BAC-Fe-arsenate, with a qmax (μg g^?1) of 14.89, 19.19, 22.32 and 27.32 respectively. Adsorption capacity varied as a function of pH and modifications to the sorbent. Adsorption isotherms from an aqueous solution of arsenite and arsenates on activated carbons were determined. These adsorption isotherms were consistent with the Langmuir and Freundlich adsorption models. Adsorption kinetics followed a pseudo-first order rate equation, as did the kinetics for BAC-Fe-arsenite and BAC-Fe-arsenate adsorption.      

Changes of organic acids and phenolic compounds contents in grapevine berries during their ripening

Changes of total content of phenolic substances, alteration in total titratable acidity and differences in tartaric acid content in grapes of four white (Müller-Thurgau — MT, Pinot Blanc — Rulandské bílé in Czech, RB, Sauvignon (Sg), and Muscat Ottonel — Mu?kát Ottonel in Czech, MO) and two blue (Dornfelder — Df and Blue Frankish — Frankovka in Czech, Fr) grapevine varieties throughout their growth, ripening and maturing (July–November). Potentiometric titration was applied for the determination of total titratable acids in grapes (expressed as tartaric acid equivalents in g L^?1). A spectrophotometric method according Rebelein based on the formation of a colored complex of ammonium metavanadate and tartaric acid was used for determination of tartaric acid in green juice made by pressing unripe grapes. A spectrophotometric method based on reduction of phosphomolybdato-tungsten complex in alkaline solution using Folin-Ciocalteau reagent was applied for determination of total content of phenolic substances (TCP).

Open image in new window

     

Aerobic oxidation of cumene catalysed by 4-alkyloxycarbonyl-N-hydroxyphthalimide

4-Hexyloxycarbonyl-, 4-dodecyloxycarbonyl- and 4-hexadecyloxycarbonyl-N-hydroxyphthalimides were synthesised using trimellitic anhydride chloride as the starting material. The obtained lipophilic derivatives of N-hydroxyphthalimide were applied as catalysts of the cumene oxidation reaction with oxygen performed in polar acetonitrile, in non-polar tert-butylbenzene and in the absence of a solvent. The courses of reactions catalysed by N-hydroxyphthalimide and its derivatives were compared.      

Application of positron spectroscopy for investigation of threshold space of oil-gas rocks

This article considers the possibility of applying the positron annihilation spectroscopy method for investigating the pore space of rocks from oil-gas and methane-coal deposits. The diagnostics of the structure was performed using the method of spectrometry of angular correlation of annihilation rays (ACAR). Using the samples of porous silicon, the authors have shown the applicability of the ACAR method for determination of the average dimensions of spherical and cylindrical nanosized objects and their concentration      

A low-cost automated flow analyzer based on low temperature co-fired ceramic and LED photometer for ascorbic acid determination

An automated flow analyzer based on low temperature co-fired ceramic (LTCC), a solid-phase reactor (SPR) and a low-cost photometer was designed for ascorbic acid (AA) determination in pharmaceutical formulations. It consists of a peristaltic pump, three-way solenoid valves, SPR to chemically convert Cu(II) into Cu(I), and a LTCC device for mixing the liberated copper with bathocuproine and detection. The flow cell in the LTCC employed an ultrabright LED — photodiode photometer. The analyzer successfully determined AA in pharmaceutical formulations. The analytical curve from 8.5×10^?6 to 7.0×10^?4 M gave a detection limit of 7.0×10^?7 M and a RSD of 2.1% for a 2.0×10^?4 M AA solution (n = 10). A high sampling frequency of 102 h^?1 and low reagent and sample consumption (150 µL) resulted.      

Use of direct immersion solid-phase microextraction on polyacrylate and polydimethylsiloxane stationary phases for simultaneous determination of the neutral and basic pharmaceuticals in wastewater

Direct immersion solid-phase microextraction has been optimized and applied to the simultaneous determination of the neutral and basic pharmaceuticals: caffeine, carbamazepine, clomipramine, chlorprothixene and clotrimazole at low concentrations in municipal wastewater. Two absorption type stationary phases: polydimethylsiloxane (PDMS) and polyacrylate (PA) have been found to be most effective for extraction of target analytes. The separation and detection were carried out by gas chromatograph coupled with mass spectrometer working in the selected ion monitoring mode. The method was validated for linearity, detection and quantitation limits, selectivity and precision. The average correlation coefficient of the calibration curves was 0.9933. The LOD values in influent and effluent wastewater were in the range of 10–145 ng L^?1 and 4–111 ng L^?1, respectively, which were a bit higher than those in the deionized water due to matrix effect. The high values of distribution coefficient (K _fs ) in PDMS/water and PA/water systems (log K _fs between 3.05 and 4.23) indicates the very high applicability of these stationary phases for determination of carbamazepine, clomipramine, chlorprothixene and clotrimazole in water samples.

Open image in new window

     

The effect of increase in concentration of Na(I) ions on biosorption of Cr(III) ions by Enteromorpha prolifera and Spirulina sp

In this study, the effect of the increase in the initial concentration of Na(I) ions in the solution during biosorption of Cr(III) ions by two edible algae: marine macroalga — Enteromorpha prolifera and microalga — Spirulina sp. was investigated. During biosorption, essential elements are exchanged with alkali and alkaline earth metal ions (e.g. Na(I) ions), which are naturally bound with the biomass. The goal of this study was to investigate the effect of the increase in concentration of Na(I) ions on biosorption performance. The equilibrium of the process is described by Langmuir equation. It was found that with the increase in the initial concentration of NaCl (from 132 to 7331 mg L^?1), there was a lower biosorption capacity of Enteromorpha prolifera (from 85.8 to 51.0 mg g^?1) and Spirulina sp. (74.2 to 20.7 mg g^?1) towards Cr(III) ions. It was also possible to determine the number of times the solution used in the biosorption process can be recycled and yet mantain high biosorption capacity. The determined numbers were: 16 for Enteromorpha prolifera and 19 for Spirulina sp.