Inverse potassium hydride: a theoretical study

Results of an experimental study on the unusual "inverse" charge state (H(+)Na(-)) in salts where the H(+) ion is sequestered, combined with our earlier theoretical calculations on an unsequestered model compound (Me(3)N-H(+)...Na(-)), prompted us to further investigate such systems. In particular, we examined Et(3)N-H(+)...K(-) because considerations of the proton affinity of the amine and of the metal-hydride bond strength suggested that this ion-pair complex might be more stable to proton abstraction than was Me(3)N-H(+)...Na(-). In the present work, the ground-state potential energy surface of the Et(3)N-H(+)...K(-) ion pair was examined using second-order M?ller-Plesset perturbation theory and 6-311++G basis sets. We found Et(3)N-H(+)...K(-) to be metastable to dissociation with a barrier of 8 kcal mol(-1) (computed at the CCSD(T) level of theory). This barrier indeed is substantially larger than that found earlier for (Me(3)N-H(+)...Na(-)) and suggests that unsequestered inverse-charged H(+)M(-) ion-pair salts may offer a reasonable route to creating high-energy materials if a means for synthesizing them in the laboratory can be designed.     

Ion pairing in tetraphenylporphyrin oxidation: a semiquantitative study

In 1,2-difluorobenzene (DFB), electrolyte conductivity measurements and cyclic voltammetric titration on the traditional benchmark tetraphenylporphyrin, H(2)tpp, permit the first estimate of ion pair association constants for singly- and doubly-oxidized free-base porphyrins. From ion titration cyclic voltammetry and digital simulation, measured association constants for H(2)tpp(+)X(-) were 65, 120, 210, 520 and 730 M(-1), for X(-)= PF(6)(-), ClO(4)(-), NTf(2)(-), BF(4)(-) and OTf(-), respectively, relative to the association constant for the H(2)tpp(+)TFPB(-) complex. By similar methods it was found that the association constants for the corresponding dication, H(2)tpp(2+), were at least 3.0 x 10(4) M(-1)(PF(6)(-)), 2.5 x 10(6) M(-1)(ClO(4)(-)), 5.2 x 10(5) M(-1)(NTf(2)(-)), 1.9 x 10(6) M(-1)(BF(4)(-)) and 2.7 x 10(6) M(-1)(OTf(-)). We demonstrate that differences in association constants allow the formal potential of the second oxidation of H(2)tpp to be shifted by more than 800 mV simply by varying the solvent and electrolyte. In addition, calculated electrostatic potential energy maps for porphyrin dications suggest that exposure of the core N-H groups is responsible for the change in ordering of anion affinities that occurs upon oxidation of H(2)tpp(+).     

Absolute rate constants for some hydrogen atom abstraction reactions by a primary fluoroalkyl radical in water

A combination of laser flash photolysis and competitive kinetic methods have been used to measure the absolute bimolecular rate constants for hydrogen atom abstraction in water from a variety of organic substrates including alcohols, ethers, and carboxylic acids by the perfluoroalkyl radical, *CF(2)CF(2)OCF(2)CF(2)SO(3)(-) Na(+). Comparison, where possible, of these rate constants with those previously measured for analogous reactions in the non-polar organic solvent, 1,3-bis(trifluoromethyl)benzene (J. Am. Chem. Soc, 1999, 121, 7335) show that the alcohols react 2-5 times more rapidly in the water solvent and that the ethers react at the same rate in both solvents. A transition state for hydrogen abstraction that is more reminiscent of an "intimate ion pair" than a "solvent separated ion pair" is invoked to explain these modest solvent effects.     

Hydride ion transfer from ruthenium(II) complexes in water: kinetics and mechanism

Reactions of hydride complexes of ruthenium(II) with hydride acceptors have been examined for Ru(terpy)(bpy)H(+), Ru(terpy)(dmb)H(+), and Ru(η(6)-C(6)Me(6))(bpy)(H)(+) in aqueous media at 25 °C (terpy = 2,2';6',2'-terpyridine, bpy = 2,2'-bipyridine, dmb = 4,4'-dimethyl-2,2'-bipyridine). The acceptors include CO(2), CO, CH(2)O, and H(3)O(+). CO reacts with Ru(terpy)(dmb)H(+) with a rate constant of 1.2 (0.2) × 10(1) M(-1) s(-1), but for Ru(η(6)-C(6)Me(6))(bpy)(H)(+), the reaction was very slow, k ≤ 0.1 M(-1) s(-1). Ru(terpy)(bpy)H(+) and Ru(η(6)-C(6)Me(6))(bpy)(H)(+) react with CH(2)O with rate constants of (6 ± 4) × 10(6) and 1.1 × 10(3) M(-1) s(-1), respectively. The reaction of Ru(η(6)-C(6)Me(6))(bpy)(H)(+) with acid exhibits straightforward, second-order kinetics, with the rate proportional to [Ru(η(6)-C(6)Me(6))(bpy)(H)(+)] and [H(3)O(+)] and k = 2.2 × 10(1) M(-1) s(-1) (μ = 0.1 M, Na(2)SO(4) medium). However, for the case of Ru(terpy)(bpy)H(+), the protonation step is very rapid, and only the formation of the product Ru(terpy)(bpy)(H(2)O)(2+) (presumably via a dihydrogen or dihydride complex) is observed with a k(obs) of ca. 4 s(-1). The hydricities of HCO(2)(-), HCO(-), and H(3)CO(-) in water are estimated as +1.48, -0.76, and +1.57 eV/molecule (+34, -17.5, +36 kcal/mol), respectively. Theoretical studies of the reactions with CO(2) reveal a "product-like" transition state with short C-H and long M-H distances. (Reactant) Ru-H stretched 0.68 ?; (product) C-H stretched only 0.04 ?. The role of water solvent was explored by including one, two, or three water molecules in the calculation.     

The nature of the H3O+ hydronium ion in benzene and chlorinated hydrocarbon solvents. Conditions of existence and reinterpretation of infrared data

Salts of the C(3v) symmetric hydronium ion, H(3)O(+), have been obtained in the weakly basic solvents benzene, dichloromethane, and 1,2-dichloroethane. This is made possible by using carborane counterions of the type CHB(11)R(5)X(6)(-) (R = H, Me, Cl; X = Cl, Br, I) because they combine the three required properties of a suitable counterion: very low basicity, low polarizability, and high chemical stability. The existence of the H(3)O(+) ion requires the formation of three more-or-less equivalent, medium-to-strong H-bonds with solvent or anion bases. With the least basic anions such as CHB(11)Cl(11)(-), IR spectroscopy indicates that C(3v) symmetric trisolvates of formulation [H(3)O(+) .3Solv] are formed with chlorocarbon solvents and benzene, the latter with the formation of pi bonds. When the solvents and anions have comparable basicity, contact ion pairs of the type [H(3)O(+).nSolv.Carborane] are formed and close to C(3v) symmetry is retained. The conditions for the existence of the H(3)O(+) ion are much more exacting than previously appreciated. Outside of the range of solvent basicity bounded at the lower end by dichloromethane and the upper end by tributyl phosphate, and with anions that do not meet the stringent requirements of weak basicity, low polarizability of high chemical stability, lower symmetry species are formed. One H-bond from H(3)O(+) to the surrounding bases becomes stronger than the other two. The distortion from C(3v) symmetry is minor for bases weaker than dichloromethane. For bases stronger than tributyl phosphate, H(2)O-H(+)-B type species are formed that are more closely related to the H(5)O(2)(+) ion than to H(3)O(+). IR data allow criteria to be defined for the existence of the symmetric H(3)O(+) ion. This includes a linear dependence between the frequencies of nu(max)(OH) and delta(OH(3)) within the ranges 3010-2536 cm(-1) for nu(max)(OH) and 1597-1710 cm(-1) for delta(OH(3)). This provides a simple way to assess the correctness of the formulation of the proton state in monohydrated acids. In particular, the 30-year-old citation classic of the IR spectrum believed to arise from H(3)O(+) SbCl(6)(-) is re-interpreted in terms of (H(2)O)(x)().HSbCl(6) hydrates. The correctness of the hydronium ion formulation in crystalline H(3)O(+)A(-) salts (A(-) = Cl(-), NO(3)(-)) is confirmed, although, when A(-) is a fluoroanion, distortions from C(3)(v)() symmetry are suggested.     

Coordinative properties of highly fluorinated solvents with amino and ether groups

Despite the widespread use of perfluorinated solvents with amino and ether groups in a variety of application fields, the coordinative properties of these compounds are poorly known. It is generally assumed that the electron withdrawing perfluorinated moieties render these functional groups rather inert, but little is known quantitatively about the extent of their inertness. This paper reports on the interactions between inorganic monocations and perfluorotripentylamine and 2H-perfluoro-5,8,11-trimethyl-3,6,9,12-tetraoxapentadecane, as determined with fluorous liquid-membrane cation-selective electrodes doped with tetrakis[3,5-bis(perfluorohexyl)phenyl]borate salts. The amine does not undergo measurable association with any ion tested, and its formal pK(a) is shown to be smaller than -0.5. This is consistent with the nearly planar structure of the amine at its nitrogen center, as obtained with density functional theory calculations. The tetraether interacts very weakly with Na(+) and Li(+). Assuming 1:1 stoichiometry, formal association constants were determined to be 2.3 and 1.5 M(-1), respectively. This disproves an earlier proposition that the Lewis base character in such compounds may be nonexistent. Due to the extremely low polarity of fluorous solvents and the resulting high extent of ion pair formation, a fluorophilic electrolyte salt with perfluoroalkyl substituents on both the cation and the anion had to be developed for these experiments. In its pure form, this first fluorophilic electrolyte salt is an ionic liquid with a glass transition temperature, T(g), of -18.5 degrees C. Interestingly, the molar conductivity of solutions of this salt increases very steeply in the high concentration range, making it a particularly effective electrolyte salt.     

Role of alkali metal cation size in the energy and rate of electron transfer to solvent-separated 1:1 [(M+)(acceptor)] (M+ = Li+, Na+, K+) ion pairs.

The effect of cation size on the rate and energy of electron transfer to [(M(+))(acceptor)] ion pairs is addressed by assigning key physicochemical properties (reactivity, relative energy, structure, and size) to an isoelectronic series of well-defined M(+)-acceptor pairs, M(+) = Li(+), Na(+), K(+). A 1e(-) acceptor anion, alpha-SiV(V)W(11)O(40)(5-) (1, a polyoxometalate of the Keggin structural class), was used in the 2e(-) oxidation of an organic electron donor, 3,3',5,5'-tetra-tert-butylbiphenyl-4,4'-diol (BPH(2)), to 3,3',5,5'-tetra-tert-butyldiphenoquinone (DPQ) in acetate-buffered 2:3 (v/v) H(2)O/t-BuOH at 60 degrees C (2 equiv of 1 are reduced by 1e(-) each to 1(red), alpha-SiV(IV)W(11)O(40)(6-)). Before an attempt was made to address the role of cation size, the mechanism and conditions necessary for kinetically well behaved electron transfer from BPH(2) to 1 were rigorously established by using GC-MS, (1)H, (7)Li, and (51)V NMR, and UV-vis spectroscopy. At constant [Li(+)] and [H(+)], the reaction rate is first order in [BPH(2)] and in [1] and zeroth order in [1(red)] and in [acetate] (base) and is independent of ionic strength, mu. The dependence of the reaction rate on [H(+)] is a function of the constant, K(a)1, for acid dissociation of BPH(2) to BPH(-) and H(+). Temperature dependence data provided activation parameters of DeltaH = 8.5 +/- 1.4 kcal mol(-1) and DeltaS = -39 +/- 5 cal mol(-1) K(-1). No evidence of preassociation between BPH(2) and 1 was observed by combined (1)H and (51)V NMR studies, while pH (pD)-dependent deuterium kinetic isotope data indicated that the O-H bond in BPH(2) remains intact during rate-limiting electron transfer from BPH(2) and 1. The formation of 1:1 ion pairs [(M(+))(SiVW(11)O(40)(5-))](4-) (M(+)1, M(+) = Li(+), Na(+), K(+)) was demonstrated, and the thermodynamic constants, K(M)(1), and rate constants, k(M)(1), associated with the formation and reactivity of each M(+)1 ion pair with BPH(2) were calculated by simultaneous nonlinear fitting of kinetic data (obtained by using all three cations) to an equation describing the rectangular hyperbolic functional dependence of k(obs) values on [M(+)]. Constants, K(M)(1)red, associated with the formation of 1:1 ion pairs between M(+) and 1(red) were obtained by using K(M)(1) values (from k(obs) data) to simultaneously fit reduction potential (E(1/2)) values (from cyclic voltammetry) of solutions of 1 containing varying concentrations of all three cations to a Nernstian equation describing the dependence of E(1/2) values on the ratio of thermodynamic constants K(M)(1) and K(M)(1)red. Formation constants, K(M)(1), and K(M)(1)red, and rate constants, k(M)(1), all increase with the size of M(+) in the order K(Li)(1) = 21 < K(Na)(1) = 54 < K(K)(1) = 65 M(-1), K(Li)(1)red = 130 < K(Na)(1)red = 570 < K(K)(1)red = 2000 M(-1), and k(Li)(1) = 0.065 < k(Na)(1) = 0.137 < k(K)(1) = 0.225 M(-1) s(-1). Changes in the chemical shifts of (7)Li NMR signals as functions of [Li(5)1] and [Li(6)1(red)] were used to establish that the complexes M(+)1 and M(+)1(red) exist as solvent-separated ion pairs. Finally, correlation between cation size and the rate and energy of electron transfer was established by consideration of K(M)(1), k(M)(1), and K(M)(1)red values along with the relative sizes of the three M(+)1 pairs (effective hydrodynamic radii, r(eff), obtained by single-potential step chronoamperometry). As M(+) increases in size, association constants, K(M)(1), become larger as smaller, more intimate solvent-separated ion pairs, M(+)1, possessing larger electron affinities (q/r), and associated with larger k(M)(1)() values, are formed. Moreover, as M(+)1 pairs are reduced to M(+)1(red) during electron transfer in the activated complexes, [BPH(2), M(+)1], contributions of ion pairing energy (proportional to -RT ln(K(M)(1)red/K(M)(1)) to the standard free energy change associated with electron transfer, DeltaG degrees (et), increase with cation size: -RT ln(K(M)(1)red/K(M)(1)) (in kcal mol(-1)) = -1.2 for Li(+), -1.5 for Na(+), and -2.3 for K(+).     

A simple approach to coordination compounds of the pentacyanocyclopentadienide anion

Deprotonation of [Et(3)NH][C(5)(CN)(5)] with metal bases provides a very simple approach to coordination compounds containing the pentacyanocyclopentadienide anion [C(5)(CN)(5)](-) (1). The three-dimensional polymer [Na(thf)(1.5)(1)](∞) and the molecular dimer [{(tmeda)(2)Na(1)}(2)] are obtained by reaction of this precursor with NaH in the presence of thf or tmeda (Me(2)NCH(2)CH(2)NMe(2)). Their single-crystal X-ray structures both reveal σ-bonded C≡N-Na arrangements and π stacking between [C(5)(CN)(5)](-) ions. DFT calculations on the [C(5)(CN)(5)](-) ion have been used to investigate the structures and bonding in [Na(thf)(1.5)(1)](∞) and [{(tmeda)(2)Na(1)}(2)]. The absence of π bonding of the metal ions in both complexes is due to dispersion of the negative charge from the C(5) ring unit to the C[triple chemical bond]N groups in the [C(5)(CN)(5)](-) ion, making the coordination chemistry of this anion distinctly different from that of cyclopentadienide C(5)H(5)(-).     

Self-assembled ionophores from isoguanosine: diffusion NMR spectroscopy clarifies cation's and anion's influence on supramolecular structure

Cation-templated self-assembly of the lipophilic isoguanosine (isoG 1) with different monovalent cations (M(+)=Li(+), Na(+), K(+), NH(4) (+), and Cs(+)) was studied in solvents of different polarity by using diffusion NMR spectroscopy. Previous studies that did not use diffusion NMR techniques concluded that isoG 1 forms both pentamers (isoG 1)(5)M(+) and decamers (isoG 1)(10)M(+) in the presence of alkali-metal cations. The present diffusion NMR studies demonstrate, however, that isoG 1 does not form (isoG 1)(5)M(+) pentamers. In fact, the diffusion NMR data indicates that both doubly charged decamers of formula (isoG 1)(10)2 M(+) and singly charged decamers, (isoG 1)(10)M(+), are formed with lithium, sodium, potassium, and ammonium tetraphenylborate salts (LiB(Ph)(4), KB(Ph)(4), NaB(Ph)(4) and NH(4)B(Ph)(4)), depending on the isoG 1:salt stoichiometry of the solution. In the presence of CsB(Ph)(4), isoG 1 affords only the singly charged decamers (isoG 1)(10)Cs(+). By monitoring the diffusion coefficient of the B(Ph)(4) (-) ion in the different mixtures of solvents, we also concluded that the anion is more strongly associated to the doubly charged decamers (isoG 1)(10)2 M(+) than to the singly charged decamers (isoG 1)(10)M(+). The (isoG 1)(10)2 M(+) species can, however, exist in solution without the mediation of the anion. This last conclusion was supported by the finding that the doubly charged decamers (isoG 1)(10)2 M(+) also prevail in 1:1 CD(3)CN:CDCl(3), a solvent mixture in which the B(Ph)(4) (-) ion does not interact significantly with the self-assembled complex. These diffusion measurements, which have provided new and improved structural information about these decameric isoG 1 assemblies, demonstrate the utility of combining diffusion NMR techniques with conventional NMR methods in seeking to characterize labile, multicomponent, supramolecular systems in solution, especially those with high symmetry.     

Hydrogen-bonded assemblies of two-electron reduced mixed-valence [XMo12O40] (X = P and Si) with p-phenylenediamines

Hydrogen-bonded assemblies of the two-electron reduced mixed-valence Keggin clusters [PMo(12)O(40)](5-) and [SiMo(12)O(40)](6-) were obtained by the one-pot electron-transfer reactions between p-phenylenediamine (PPD) or 2,3,5,6-tetramethyl-PPD (TMPPD) (donors) and H(+)(3)[PMo(12)O(40)](3-) or H(+)(4)[SiMo(12)O(40)](4-) (acceptors) in CH(3)CN. The redox states of the [PMo(12)O(40)](5-) and [SiMo(12)O(40)](6-) clusters were confirmed by the redox titrations and electronic absorption measurements. In (HPPD(+))(3)(H(+))(2)[PMo(12)O(40)](5-)(CH(3)CN)(3-6) (1), the N-H ~ O hydrogen-bonded interactions between the monoprotonated HPPD(+) (or diprotonated H2PPD(2+)) and the [PMo(12)O(40)](5-) resulted in a windmill-like assembly and hydrophilic one-dimensional channels are formed with a cross-sectional area of 0.065 nm(2), and these are filled by the CH(3)CN molecules. Also, the CH(3)CN molecules in salt 1 were removed by immersing the single crystals of 1 into H(2)O, CH(3)OH, and C(2)H(5)OH solvents. In the compound, (HTMPPD(+))(6)[SiMo(12)O(40)](6-)(CH(3)CN)(6) (2), the N-H ~ O hydrogen-bonded interactions between the monoprotonated HTMPPD(+) molecules and the [SiMo(12)O(40)](6-) formed a "Saturn-ring"-like assembly. Each Saturn-ring was arranged into an hexagonally packed array via hydrogen-bonded and π-stacking interactions of HTMPPD(+), while the CH(3)CN solvent present in salt 2 are only found in the zero-dimensional isolated cavities.     

Synthesis, structure, and electrochemical studies of molybdenum and tungsten dinitrogen, diazenido, and hydrazido complexes that contain aryl-substituted triamidoamine ligands

One-electron reduction of [ArN(3)N]MoCl complexes (Ar = C(6)H(5), 4-FC(6)H(4), 4-t-BuC(6)H(4), 3,5-Me(2)C(6)H(3)) yields complexes of the type [ArN(3)N]Mo-N=N-Mo[ArN(3)N], while two-electron reduction yields ([ArN(3)N]Mo-N=N)(-) derivatives (Ar = C(6)H(5), 4-FC(6)H(4), 4-t-BuC(6)H(4), 3,5-Me(2)C(6)H(3), 3,5-Ph(2)C(6)H(3), and 3,5-(4-t-BuC(6)H(4))(2)C(6)H(3)). Compounds that were crystallographically characterized include ([t-BuC(6)H(4)N(3)N]Mo)(2)(N(2)), Na(THF)(6)([PhN(3)N]Mo-N=N)(2)Na(THF)(3), [t-BuC(6)H(4)N(3)N]Mo-N=N-Na(15-crown-5), and ([Ph(2)C(6)H(3)N(3)N]MoNN)(2)Mg(DME)(2). Compounds of the type [ArN(3)N]Mo-N=N-Mo[ArN(3)N] do not appear to form when Ar = 3,5-Ph(2)C(6)H(3) or 3,5-(4-t-BuC(6)H(4))(2)C(6)H(3), presumably for steric reasons. Treatment of diazenido complexes (e.g., [ArN(3)N]Mo-N=N-Na(THF)(x)) with electrophiles such as Me(3)SiCl or MeOTf yielded [ArN(3)N]Mo-N=NR complexes (R = SiMe(3) or Me). These species react further to yield ([ArN(3)N]Mo-N=NMe(2))(+) species in the presence of methylating agents. Addition of anionic methyl reagents to ([ArN(3)N]Mo-N=NMe(2))(+) species yielded [ArN(3)N]Mo(N=NMe(2))(Me) complexes. Reduction of [4-t-BuC(6)H(4)N(3)N]WCl under dinitrogen leads to a rare ([t-BuC(6)H(4)N(3)N]W)(2)(N(2)) species that can be oxidized by two electrons to give a stable dication (as its BPh(4)(-) salt). Reduction of hydrazido species leads to formation of Mo=N in low yields, and only dimethylamine could be identified among the many products. Electrochemical studies revealed expected trends in oxidation and reduction potentials, but also provided evidence for stable neutral dinitrogen complexes of the type [ArN(3)N]Mo(N(2)) when Ar is a relatively bulky terphenyl substituent.     

Solvent extraction of the ion-pairs of chromium(VI) and molybdenum(VI) with trioctylmethylammonium chloride and benzyldimethylcetylammonium chloride

The number of capriquat molecules per chromium(VI) atom in the chromate-capriquat ion-association complex has been found to be between one and two. The distribution ratio in the extraction of chromium(VI) with capriquat is dependent on the dielectric constant of the organic solvent, with a minimum at a dielectric constant of about 8. The absorption spectra of the ion-pair extracted into cyclohexane, carbon tetrachloride, benzene and n-butanol are very similar to that of chromate in aqueous solution. The absorption spectra of the chromium(VI)-capriquat extracts in these organic solvents gradually change to an absorption spectrum similar to that of HCrO(4)(-) in aqueous solution. Chromium(VI)-capriquat extracted into chloroform and 1,2-dichloroethane gives absorption spectra similar to that of HCrO(4)(-)in aqueous medium. The chromium(VI)-capriquat species extracted into 1,2-dichloroethane may be (Q(+))(2).CrO(4)(2-)(H(2)O)(n). In contrast, chromium(VI) is extracted with capriquat into the other organic solvents from ammoniacal medium as a mixture of (Q(+))(2).CrO(4)(2-)(H(2)O)(n) and Q(+).NH(4)(+).CrO(4)(2-)(H(2)O)(n). The spectral change is ascribed to the change of the extracted species from (Q(+))(2).CrO(4)(2-)(H(2)O)(n) and Q(+)NH(4)(+).CrO(4)(-)(H(2)O)(n) to Q(+).HCrO(4)(2-)(H(2)O)(n-1). The chromium(VI)-zephiramine species extracted is formulated as (Q(+), NH(4)(+))(2)CrO(4)(2-)(H(2)O)(n).(Q(+).Cl(-))(m). Molybdenum(VI) is extracted with capriquat into the same organic solvents as a mixture of (Q(+))(2).MoO(4)(2-)(H(2)O)(n) and Q(+).NH(4)(+).MoO(4)(2-).(H(2)O)(n).     

Ab initio study of complexes with two cations as N-H donors to F-: structures and spin-spin coupling constants across N-H-F hydrogen bonds

A systematic ab initio study has been carried out to determine the MP2/6-31+G(d,p) structures and EOM-CCSD coupling constants across N-H-F-H-N hydrogen bonds for a series of complexes F(H(3)NH)(2)(+), F(HNNH(2))(2)(+), F(H(2)CNH(2))(2)(+), F(HCNH)(2)(+), and F(FCNH)(2)(+). These complexes have hydrogen bonds with two equivalent N-H donors to F(-). As the basicity of the nitrogen donor decreases, the N-H distance increases and the N-H-F-H-N arrangement changes from linear to bent. As these changes occur and the hydrogen bonds between the ion pairs acquire increased proton-shared character, (2h)J(F)(-)(N) increases in absolute value and (1h)J(H)(-)(F) changes sign. F(H(3)NH)(2)(+) complexes were also optimized as a function of the N-H distance. As this distance increases and the N-H...F hydrogen bonds change from ion-pair to proton-shared to traditional F-H...N hydrogen bonds, (2h)J(F)(-)(N) initially increases and then decreases in absolute value, (1)J(N)(-)(H) decreases in absolute value, and (1h)J(H)(-)(F) changes sign. The signs and magnitudes of these coupling constants computed for F(H(3)NH)(2)(+) at short N-H distances are in agreement with the experimental signs and magnitudes determined for the F(collidineH)(2)(+) complex in solution. However, even when the N-H and F-H distances are taken from the optimized structure of F(collidineH)(2)(+), (2h)J(F)(-)(N) and (1h)J(H)(-)(F) are still too large relative to experiment. When the distances extracted from the experimental NMR data are used, there is excellent agreement between computed and experimental coupling constants. This suggests that the N-H-F hydrogen bonds in the isolated gas-phase F(collidineH)(2)(+) complex have too much proton-shared character relative to those that exist in solution.     

First steps towards dissolution of NaSO4- by water

NaSO(4)(-)(H(2)O)(n) (n = 0-4) clusters have been generated in the gas phase as model systems to simulate the first dissolution steps of sulfate salts in water; photoelectron spectroscopy and theoretical calculations indicate that the first three water molecules strongly interact with both Na(+) and SO(4)(2-), forming a three-water solvation ring to start to pry apart the Na(+)SO(4)(2-) contact ion pair.     

Application of bis(iminophosphorane) in heterocyclic synthesis: new entries to symmetrically or unsymmetrically substituted thieno[2,3-d:5,4-d']dipyrimidine-4,5(3H,6H)-diones

The bis(carbodiimides) 4, obtained from bis-aza-Wittig reactions of bis(iminophosphorane) 3 with 2 equiv of aromatic isocyanates, were reacted with secondary amine to give symmetrically substituted 2,7-diaminothieno[2,3-d:5,4-d']dipyrimidine-4,5(3H,6H)-dione 6 in the presence of a catalytic amount of EtO(-)Na(+). Reactions of 4 with phenols or ROH in the presence of a catalytic amount of potassium carbonate or RO(-)Na(+) gave symmetrically substituted 2,7-diaryl(alkyl)oxythieno[2,3-d:5,4-d']dipyrimidine-4,5(3H,6H)-diones 6 in satisfactory yields. However, iminophosphoranes 9 were obtained via reaction of bis(iminophosphorane) 3 with 1 equiv of aromatic isocyanate and subsequent reaction with an amine in the presence of a catalytic amount of EtO(-)Na(+). Further reaction of iminophosphoranes 9 with aromatic isocyanates and various nucleophile generated unsymmetrically substituted thieno[2,3-d:5,4-d']dipyrimidine-4,5(3H,6H)-diones 12 in good yields.     

Di- and tricobalt Dawson sandwich complexes: synthesis,spectroscopic characterization,and electrochemical behavior of Na(18)[(NaOH(2))(2)Co(2)(P(2)W(15)O(56))(2)] and Na(17)[(NaOH(2))Co(3)(H(2)O)(P(2)W(15)O(56))(2)

The reaction of the trivacant Dawson anion alpha-[P(2)W(15)O(56)](12-) and the divalent cations Co(2+) is known to form the tetracobalt sandwich complex [Co(4)(H(2)O)(2)(P(2)W(15)O(56))(2)](16-) (Co(4)P(4)W(30)). Two new complexes, with different Co/P(2)W(15) stoichiometry, [(NaOH(2))(2)Co(2)(P(2)W(15)O(56))(2)](18-) (Na(2)Co(2)P(4)W(30)) and [(NaOH(2))Co(3)(H(2)O)(P(2)W(15)O(56))(2)](17-) (NaCo(3)P(4)W(30)), have been synthesized as aqueous-soluble sodium salts, by a slight modification of the reaction conditions. Both compounds were characterized by IR, elemental analysis, and (31)P solution NMR spectroscopy. These species are "lacunary" sandwich complexes, which add Co(2+) cations according to Na(2)Co(2)P(4)W(30) + Co(2+) --> NaCo(3)P(4)W(30) + Na(+) followed by NaCo(3)P(4)W(30) + Co(2+) --> Co(4)P(4)W(30) + Na(+). A Li(+)/Na(+) exchange in the cavity was evidenced by (31)P dynamic NMR spectroscopy. The electrochemical behaviors of the sandwich complexes [(NaOH(2))Co(3)(H(2)O)(P(2)W(15)O(56))(2)](17-) and [(NaOH(2))(2)Co(2)(P(2)W(15)O(56))(2)](18-) were investigated in aqueous solutions and compared with that of [Co(4)(H(2)O)(2)(P(2)W(15)O(56))(2)](16-). These complexes showed an electrocatalytic effect on nitrite reduction.     

"Alkaline-earth metals in a box": structures of solvent-separated ion pairs

During our research on homoleptic organocalcium compounds, we found that fluorenylcalcium complexes show unusual solution behavior and precipitate from nonpolar solvents after addition of THF. Their solid-state structures reveal the unexpected rupture of both metal-carbanion bonds by the polar solvent THF. The crystal structures of five new Mg and Ca solvent-separated ion pairs are described. The compound [Ca(2+)(thf)(6)][Me(3)Si(fluorenyl(-))](2) is the first organometallic complex of a Group 2 element that crystallizes as a completely solvent-separated ion pair. The driving forces for its formation are: 1) the strong Ca-THF bond; 2) the stability of the free [Me(3)Si(fluorenyl)](-) ion; 3) encapsulation of [Ca(2+)(thf)(6)] in a "box", the walls of which consist of anionic fluorenyl ligands and benzene molecules; and 4) the presence of numerous (THF)C- H...pi interactions. The magnesium analogue [Mg(2+)(thf)(6)][Me(3)Si(fluorenyl(-))](2) is isostructural. Bis(7,9-diphenylcyclopenta[a]acenaphthadienyl)calcium also crystallizes as a completely solvent-separated ion pair and can likewise be described as a [Ca(2+)(thf)(6)] species in a box of delocalized anions and benzene molecules. In addition, the structures of two Ph(4)B(-) complexes of Mg and Ca are described. [Mg(2+)(thf)(6)][Ph(4)B(-)](2) crystallizes as a completely solvent-separated ion pair and also shows a solvated metal cation bonded via C-H.pi interactions in a cavity formed by Ph(4)B(-) ions. [(thf)(4)CaBr(+)][Ph(4)B(-)] has a structure in which one of the anionic ligands is still bonded to the Ca atom. Bridging bromide ligands result in the formation of the dimer [(thf)(4)CaBr(+)](2).     

X-ray crystal structure, Raman spectroscopy, and Ab initio density functional theory calculations on 1,1,3,3-tetramethylguanidinium bromide

The salt 1,1,3,3-tetramethylguanidinium bromide, [((CH(3))(2)N)(2)C═NH(2)](+)Br(-) or [tmgH]Br, was found to melt at 135(5) °C, forming what may be referred to as a moderate temperature ionic liquid. The chemistry was studied and compared with the corresponding chloride compound. We present X-ray diffraction and Raman evidence to show that also the bromide salt contains dimeric ion pair "molecules" in the crystalline state and probably also in the liquid state. The structure of [tmgH]Br determined at 120(2) K was found to be monoclinic, space group P2(1)/n, with a = 7.2072(14), b = 13.335(3), c = 9.378(2) ?, β =104.31(3)°, Z = 2, based on 11769 reflections, measured from θ = 2.71-28.00° on a small colorless needle crystal. Raman and IR spectra are presented and assigned. When heated, both the chloride and the bromide salts form vapor phases. The Raman spectra of the vapors are surprisingly alike, showing, for example, a characteristic strong band at 2229 cm(-1). This band was interpreted by some of us to show that the [tmgH]Cl gas phase should consist of monomeric ion pair "molecules" held together by a single N-H(+)···Cl(-) hydrogen bond, the stretching vibration of which should be causing the band, based on ab initio molecular orbital density functional theory type calculations. It is not likely that both the bromide and chloride should have identical spectra. As explanation, the formation of 1,1-dimethylcyanamide gas is proposed, by decomposition of [tmgH]X leaving dimethylammonium halogenide (X = Cl, Br). The Raman spectra of all gas phases were quite identical and fitted the calculated spectrum of dimethylcyanamide. It is concluded that monomeric ion pair "molecules" held together by single N-H(+)···X(-) hydrogen bonds probably do not exist in the vapor phase over the solids at about 200-230 °C.     

Novel synthesis and oxidizing ability of tropylium ions annulated with two 2,4-dimethylfuro[2,3-d]pyrimidine-1(2H),3(4H)-diones

Convenient preparation of novel tropylium ions annulated with two 2,4-dimethylfuro[2,3-d]pyrimidine-1(2H),3(4H)-diones, 12a(+).BF(4)(-) and 12b(+)().BF(4)(-), consists of a reaction of 2-methoxytropone with dimethylbarbituric acid to give 7,9-dimethyl-3-[1',3'-dimethyl-2'(1'H),4'(3'H),6'(5'H)-trioxopyrimidin-5'-ylidene]cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dione 8 and the following oxidative cyclization by using DDQ or photoirradiation under aerobic conditions. On the basis of the MO calculations, the selectivity of two types of oxidative cyclization reactions of 8 was rationalized. X-ray crystal analyses and MO calculations were carried out to clarify the structural characteristics of 12a(+). BF(4)(-) and 12b(+).BF(4)(-). The stability of cations 12a(+) and 12b(+) is expressed by the pK(R) + values which were determined spectrophotometrically as 8.8 and 8.6. The electrochemical reduction of 12a(+) and 12b(+) exhibited reduction potential at -0.63 and -0.62 (V vs Ag/AgNO(3)), respectively. Reactions of 12a(+)().BF(4)(-) and 12b(+)().BF(4)(-) with some nucleophiles, hydride and diethylamine, were carried out to clarify that the reactivity of 12a(+)().BF(4)(-) and 12b(+).BF(4)(-) was substantially dependent on the annulating position. The oxidizing ability of 12a(+).BF(4)(-) and 12b(+).BF(4)(-) toward alcohols and amines in the autorecycling process was demonstrated as well.     

Influence of the Li+ on the structure of the [Cu3phis3]3+ cation

When [Cu(3)(phis)(3)](ClO(4))(3), obtained from Cu(ClO(4))(2).6H(2)O with the Na(+) or K(+) salt of the phis anion (Hphis = N-(2-pyridylmethyl)-l-histidine), is reacted with LiClO(4), the tricopper cationic structure rearranged to accommodate a Li(+) ion to form [(ClO(4))Li[Cu(3)(phis)(3)]](ClO(4))(3) which can also be prepared directly by reacting Cu(ClO(4))(2).6H(2)O with the Li(+) salt of the phis anion.