A Novel Bicyclophosphite Ligand Directly Yields Rhodium Hydride Complexes

 Complexation of Rh(I) with o, o′-dimethylene-(tris-p-cresyl)-bicyclophosphite (BCP, 1) has been investigated in solution by NMR, semi-empirical quantum mechanical, and molecular mechanics calculations. ¹H and ³¹P NMR spectroscopic data show that when the BCP/Rh ratio exceeds 2, Rh hydride complexes of the composition RhH(BCP)₃ and RhH(BCP)₄ are formed. The source of the hydride ion is the ligand itself; most probably, H⁻ originates from the bridging CH₂ groups of BCP. The chemical shifts of these protons are sensitive to complexation due to the considerable electron density of HOMO and LUMO at one of the bridging CH₂ moieties. Molecular mechanics simulations of the molecular structure of these complexes show that two cavities are formed in [Rh(BCP)₃]⁺ by the aromatic rings of the ligands. These cavities may alternatively open and close, thus providing for a flexibly shielded catalytic site which explains the unusual catalytic behaviour of Rh complexes with BCP in hydrogenation and hydroformylation reactions.     

P/Rh比对PPh3-Rh/SiO2催化剂上丙烯氢甲酰化反应的影响

研究了P/Kh比对PPh3-Rh/SiO2催化剂上丙烯氢甲酰化反应性能的影响.结果表明,当P/Rh比为15时,丙烯氢甲酰化反应性能最好,丙烯转化率为25.9%,产物丁醛正异比为14,转换频率为241 h-1.PPh3-Rh/SiO2催化剂的固体31P核磁共振结果表明,在合成气气氛下,物理吸附的PPh3能够溢流到Rh/S...     

A Novel Bicyclophosphite Ligand Directly Yields Rhodium Hydride Complexes

Summary.  Complexation of Rh(I) with o, o′-dimethylene-(tris-p-cresyl)-bicyclophosphite (BCP, 1) has been investigated in solution by NMR, semi-empirical quantum mechanical, and molecular mechanics calculations. ¹H and ³¹P NMR spectroscopic data show that when the BCP/Rh ratio exceeds 2, Rh hydride complexes of the composition RhH(BCP)₃ and RhH(BCP)₄ are formed. The source of the hydride ion is the ligand itself; most probably, H⁻ originates from the bridging CH₂ groups of BCP. The chemical shifts of these protons are sensitive to complexation due to the considerable electron density of HOMO and LUMO at one of the bridging CH₂ moieties. Molecular mechanics simulations of the molecular structure of these complexes show that two cavities are formed in [Rh(BCP)₃]⁺ by the aromatic rings of the ligands. These cavities may alternatively open and close, thus providing for a flexibly shielded catalytic site which explains the unusual catalytic behaviour of Rh complexes with BCP in hydrogenation and hydroformylation reactions. Received February 15, 2001. Accepted (revised) April 23, 2001     

Unusual behavior of o,o"-dimethylene(tri-p-cresyl) bicyclophosphite as a novel organophosphorus ligand in olefin hydrogenation and hydroformylation

A representative of the new class of organophosphorus ligands, viz., o,o"-dimethylene(tri-p-cresyl) bicyclophosphite (BCP), was studied as a promoter of Rh(acac)(CO)₂ in hydrogenation and hydroformylation. BCP enhances the activity and stability of the catalyst much more strongly than analogous organophosphorus ligands used previously (triphenylphosphine, triphenyl phosphite, and etriolphosphite). A reason for this behavior of BCP was studied using NMR spectroscopy, quantum-chemical calculations, and molecular simulation. The high sensitivity of the ¹H NMR signals of the methylene groups of BCP toward complexation appears due to the high density of the highest occupied and lowest unoccupied MO of protons of the CH₂ groups, especially those directed toward the P atom. The ¹H and ³¹P NMR spectra indicate the formation of hydrides of two types (HRh(BCP)₃ and HRh(BCP)₄) directly upon the addition of BCP in amounts exceeding that corresponding to the BCP/Rh = 2 ratio to a solution of Rh((acac)(CO)₂. The most probable source of the hydride ion is the BCP molecule itself, namely, the bridging CH₂ groups. The molecular mechanics simulation showed that in the [Rh(BCP)₃]⁺ complexes the aromatic rings of BCP formed two molecular cavities. These cavities can alternatively open and close, thus providing flexible screening of the catalytic site. This explains the unusual behavior of the Rh complexes with BCP in hydrogenation and hydroformylation.     

Square‐Planar Carbonylchlororhodium(I) Complexes Containing trans‐Spanning Diphosphine Ligands as Catalysts for the Carbonylation of Methanol

The rhodium(I) complexes trans‐[Rh(diphos)(CO)Cl] 7 (diphos=pbpb), 8 (diphos=nbpb), and 9 (diphos=cbpb) were synthesized (Scheme 4) and used as catalysts for the carbonylation of MeOH to AcOH (Scheme 1). The trans coordination imposed by the rigid C‐spacer framework of the diphos ligands pbpb, nbpb, and cbpb, demonstrated by ³¹P‐NMR and IR spectroscopy of 7 – 9 and unambiguously confirmed by single‐crystal X‐ray structure analysis of 7 , improved the thermal stability of the rhodium(I) system under carbonylation conditions and, hence, the catalytic performance of the complexes. For the catalytic carbonylation of MeOH, the active catalyst could be prepared in situ from the mixture of [Rh(CO)₂Cl]₂ and the corresponding diphos ligand pbpb, nbpb, or cbpb, giving the same results as carbonylation in the presence of the isolated complexes 7, 8 or 9 (see Table). The highest activity was observed for complex 7 (or the mixture [Rh(CO)₂Cl]₂/pbpb, the catalytic turnover number (TON) being 950 after 15 min (170°, 22 bar).     

Synthesis and reactivity of rhodium(I) complexes of the type Rh(L-L)(CO)[P(OPh)3] and Rh(L-L)[P(OPh)3]2

Summary The carbonyl ligands in the Rh¹ complexes Rh(L-L)(CO)₂ [L-L=anthranilate (AA) orN-phenylanthranilate(FA) ions] are replaced by P(OPh)₃ to form the mono-or disubstituted products, Rh(L-L)(CO)[P(OPh)₃] and Rh(L-L)[P(OPh)₃]₂ respectively depending on the [P(OPh)₃]/[Rh] molar ratio, at room temperature and in air. Under argon at [P(OPh)₃]/[Rh]4 theortho-metallated Rh¹ complex Rh[P(OPh)₃]₃[P(OC₆H₄)-OPh)₂] is formed. The new route forortho-metallated Rh¹ complex synthesis is described.The Rh(AA)(CO)₂ complex was used as a catalyst precursor in hydroformylation of olefins.     

聚4-乙烯吡啶类高分子铑(I)化合物对甲醇羰化合成乙酸的催化性能

本文将聚4-乙烯吡啶(PVPy)、聚1-甲基-4-乙烯吡啶季铵碘(PVPyMe^+I^-)和4-乙烯吡啶/1-甲基-4-乙烯吡啶季铵碘共聚物[P(VPy-VPyMe^+I^-)]分别与四羰基二氯二铑反应制备成高分子铑(I)催化剂, 并考察了它们各自在甲醇羰化反应中的催化行为。结合IR光谱对这些催化剂结构的分析研究表明, 以上4-乙烯吡啶类高分子链上所含的功能基各自与铑(I)配合物离子之间以不同的链联方式所产生的不同结构的活性物种对催化反应性能有着显著的影响, 具有双配位的螯合型稳定结构的Rh(I)/PVPy催化剂, 表现出较差的催化反应活性, 而离子键合型的Rh(I)/PVPyMe^+I^-和杂键合型的Rh(I)/P(VPy-VPyMe^+I^-)催化剂均表现较佳的反应性能, 特别是Rh(I)/P(VPy-VPyMe^+I^-),由于其形成具有更强亲核性的五配位中间过渡态参与反应过程, 从而在较大程度上提高了催化反应速率。     

Oxidative addition of different electrophiles with rhodium(I) carbonyl complexes of unsymmetrical phosphine–phosphine monoselenide ligands

Dimeric chlorobridge complex [Rh(CO)₂Cl]₂ reacts with two equivalents of a series of unsymmetrical phosphine–phosphine monoselenide ligands, Ph₂P(CH₂)_nP(Se)Ph₂ {n = 1( a ), 2( b ), 3( c ), 4( d )}to form chelate complex [Rh(CO)Cl(P∩Se)] ( 1a ) {P∩Se = η²‐(P,Se) coordinated} and non‐chelate complexes [Rh(CO)₂Cl(P～Se)] ( 1b–d ) {P～Se = η¹‐(P) coordinated}. The complexes 1 undergo oxidative addition reactions with different electrophiles such as CH₃I, C₂H₅I, C₆H₅CH₂Cl and I₂ to produce Rh(III) complexes of the type [Rh(COR)ClX(P∩Se)] {where R = ? C₂H₅ ( 2a ), X = I; R = ? CH₂C₆H₅ ( 3a ), X = Cl}, [Rh(CO)ClI₂(P∩Se)] ( 4a ), [Rh(CO)(COCH₃)ClI(P～Se)] ( 5b–d ), [Rh(CO)(COH₅)ClI‐(P～Se)] ( 6b–d ), [Rh(CO)(COCH₂C₆H₅)Cl₂(P～Se)] ( 7b–d ) and [Rh(CO)ClI₂(P～Se)] ( 8b–d ). The kinetic study of the oxidative addition (OA) reactions of the complexes 1 with CH₃I and C₂H₅I reveals a single stage kinetics. The rate of OA of the complexes varies with the length of the ligand backbone and follows the order 1a > 1b > 1c > 1d . The CH₃I reacts with the different complexes at a rate 10–100 times faster than the C₂H₅I. The catalytic activity of complexes 1b–d for carbonylation of methanol is evaluated and a higher turnover number (TON) is obtained compared with that of the well‐known commercial species [Rh(CO)₂I₂]^?. Copyright © 2006 John Wiley & Sons, Ltd.     

Highly regioselective hydroaminomethylation of terminal olefins to linear amines using Rh complexes with a Tetrabi phosphorus ligand

A highly regioselective hydroaminomethylation of terminal olefins catalyzed by Rh complexes with 2, 2′, 6, 6′‐tetrakis ((diphenylphosphino)methyl)‐1, 1′‐biphenyl (Tetrabi) ligand has been developed. Up to 99 % amine selectivity, 168 linear/branched amine product ratio (n/i), and 97.4 % linear amine yield has been obtained at a substrate/rhodium precursor ratio (S/Rh) of 1000 with this methodology. The turnover number was achieved 6930 at 10000 S/Rh ratio, and the n/i can reach up to >525. Several different olefins and secondary amines have been applied successfully with high chemoselectivity (99 %), yield (>98 %), and regioselectivity (>120).     

1,2,4‐Triazol‐3‐ylidenes with an N‐2,4‐Dinitrophenyl Substituent as Strongly π‐Accepting N‐Heterocyclic Carbenes

The synthesis and characterisation of a series of new Rh and Au complexes bearing 1,2,4‐triazol‐3‐ylidenes with a N‐2,4‐dinitrophenyl (N‐DNP) substituent are described. IR, NMR, single‐crystal X‐ray diffraction and computational analyses of the Rh complexes revealed that the N‐heterocyclic carbenes (NHCs) behaved as strong π acceptors and weak σ donors. In particular, a natural bond orbital (NBO) analysis revealed that the contributions of the Rh→C_carbene π backbonding interaction energies (ΔE_bb) to the bond dissociation energies (BDE) of the Rh? C_carbene bond for [RhCl(NHC)(cod)] (cod=1,5‐cyclooctadiene) reached up to 63 %. The Au complex exhibited superior catalytic activity in the intermolecular hydroalkoxylation of cyclohexene with 2‐methoxyethanol. The NBO analysis suggested that the high catalytic activity of the Au^I complex resulted from the enhanced π acidity of the Au atom.     

Rh/Ph3PO催化剂体系的辛烯氢甲酰化反应性能考察和原位红外表征

考察了反应温度,ＣＯ／Ｈ２压力和Ｐ／Ｒｈ比等因素,对Ｒｈ／Ｐｈ３ＰＯ催化剂催化混合辛烷氢甲酰化反应活性的影响,优化出最佳反应条件,并采用加热加压的原位红外表征方法,跟踪了在１－辛烯反应中Ｒｈ／Ｐｈ３ＰＯ催化剂的活化、中间活性物种的产生和分解消失等瞬态变化情况。     

Xantphite: A New Family of Ligands for Catalysis. Applications in the Hydroformylation of Alkenes

The novel bulky diphosphite (P∩P) ligands ( 3 and 4 ) based on the 2,7,9,9‐tetramethyl‐9H‐xanthene‐4,5‐diol ( 2 ) backbone were investigated in the Rh‐catalyzed hydroformylation of oct‐1‐ene, styrene, and (E)‐oct‐2‐ene. These diphosphites gave rise to very active and selective catalysts for the hydroformylation of oct‐1‐ene to nonanal with average rates>10000 (mol aldehyde)(mol Rh)⁻¹h⁻¹ (P(CO/H₂)=20 bar, T=80°, [Rh]=1 mM ) and maximum selectivities of 79% for the linear product. Relatively high selectivities towards the linear aldehyde (up to 70%, linear/branched up to 2.3) but very high activities (up to 39000 (mol aldehyde)(mol Rh)⁻¹h⁻¹) were observed for the hydroformylation of styrene in the presence of these bidentate ligands (P(CO/H₂)=2 – 10 bar, T=120°, [Rh]=0.2 mM ). Remarkable activities (up to 980 (mol aldehyde)(mol Rh)⁻¹h⁻¹) were achieved with these diphosphites for the hydroformylation of (E)‐oct‐2‐ene with selectivities for the linear product of 74% (l/b up to 2.8, P(CO/H₂)=2 bar, T=120°, [Rh]=1 mM ). A detailed study of the solution structure of the catalyst under catalytic conditions was performed by NMR and high‐pressure FT‐IR. The spectroscopic data revealed that under hydroformylation conditions, the bidentate ligands rapidly formed stable, well‐defined catalysts with the structure [RhH(CO)₂(P∩P)]. All the ligands showed a preference for an equatorial‐apical ( ea ) coordination mode in the trigonal bipyramidal Rh‐complexes, indicating that a bis‐equatorial ( ee ) coordination is not a prerequisite for highly selective catalysts.     

硅胶键合膦的制备及其对铑络合物催化1-辛烯氢甲酰化反应的影响

以硅胶为载体, 采用键合接枝法将2-(二苯膦基)乙基三乙氧基硅烷(DPPES)共价键合于硅胶表面, 制备了性能优良的硅胶键合型膦配体(以SiO₂(PPh₂)表示). 以SiO₂(PPh₂)为配体, Rh(acac)(CO)₂ (acac:乙酰丙酮)为催化前体, 负载铑膦络合物催化剂(SiO₂(PPh₂)/Rh)在1-辛烯氢甲酰化反应中原位生成. 对生成的负载型催化剂和硅胶键合型膦配体进行了傅里叶变换红外(FTIR)光谱表征, 考察了膦/铑摩尔浓度比([P]/[Rh])、温度等因素对铑催化的长链1-辛烯氢甲酰化反应的影响. 结果表明, 膦/铑摩尔浓度比的增加能显著提高反应的成醛选择性, 降低铑的流失. 在[P]/[Rh]=12、363 K、2.0 MPa、1.5 h 的温和反应条件下, 1-辛烯转化率和成醛选择性分别可达98.4%和95.3%, 其催化活性与DPPES或三苯基膦(TPP)作配体时的均相铑催化相近. 催化剂循环4 次后, 反应活性无明显下降, 1-辛烯转化率均在97.0%左右, 经电感耦合等离子体原子发射光谱(ICP-AES)检测,有机相中铑流失低于0.1%.     

Rhodium(I) carbonyl complexes of ether‐phosphine ligands and their reactivity

The reactions of dimeric complex [Rh(CO)₂Cl]₂ with hemilabile ether‐phosphine ligands Ph₂P(CH₂) _nOR [n = 1, R = CH₃ (a); n = 2, R = C₂H₅ (b)] yield cis‐[Rh(CO)₂Cl(P ～ O)] (1) [P ～ O = η ¹‐(P) coordinated]. Halide abstraction reactions of 1 with AgClO₄ produce cis‐[Rh(CO)₂(P ∩ O)]ClO₄ (2) [P ∩ O = η ²‐(P,O)chelated]. Oxidative addition reactions of 1 with CH₃I and I₂ give rhodium(III) complexes [Rh(CO)(COCH₃)ClI(P ∩ O)] (3) and [Rh(CO)ClI₂(P ∩ O)] (4) respectively. The complexes have been characterized by elemental analyses, IR, ¹H, ¹³C and ³¹P NMR spectroscopy. The catalytic activity of 1 for carbonylation of methanol is higher than that of the well‐known [Rh(CO)₂I₂]^? species. Copyright © 2002 John Wiley & Sons, Ltd.     

Studies on the Synthesis of Sulfur-Containing Polymer-Rhodium Complexes and Their Use as Catalysts for Hydroformylation

A kind of nonphosphine polymer catalyst has been synthesized by partial substitution of the chlorine atoms of poly(vinyl chloride) with -SR groups (n-propyl, n-hexyl, benzyl, and p-tolyl). Rhodium complexes of these sulfur-containing polymer ligands are highly active catalysts for the hydroformylation of α-olefins. At 60°C and 60 kg/cm², conversion of 1-hexene was nearly complete within 4–6 h. The rhodium to 1-hexene mole ratio was 1/800 to 1/1 000, and the catalyst could be reused once again without losing activity. The effects of reaction temperature, pressure, H₂/CO ratio, S/Rh ratio, concentration of catalyst, and reaction time on the catalyst's activity were examined. The possible mechanism of hydroformylation is discussed. A copolymer of butyl vinyl sulfide and acrylonitrile was synthesized and its rhodium complex was prepared. The catalytic acitvities of this complex for the hydroformylation of 1-hexene was also investigated.     

State of supported rhodium nanoparticles for methane catalytic partial oxidation (CPO): FT-IR studies

The effect of pretreatments as well as of rhodium precursor and of the support over the morphology of Rh nanoparticles were investigated by Fourier transform infrared (FT-IR) spectroscopy of adsorbed CO. Over a Rh/alumina catalyst, both metallic Rh particles, characterized by IR bands in the range 2070-2060 cm-1 and 1820-1850 cm-1, and highly dispersed rhodium species, characterized by symmetric and asymmetric stretching bands of RhI(CO)2 gem-dicarbonyl species, are present. Their relative amount changes following pretreatments with gaseous mixtures, representative of the catalytic partial oxidation (CPO) reaction process. The Rh metal particle fraction decreases with respect to the Rh highly dispersed fraction in the order CO approximately CO/H2 > CH4/H2O, CH4/O2 > CH4 > H2. The metal particle dimensions decrease in the order CH4/O2 > H2 > CH4/H2O > CO > CO/H2. Grafting from a carbonyl rhodium complex also increases the amount and the dimensions of Rh0 particles at the catalyst surface. Increasing the ratio (extended rhodium metal particles/highly dispersed Rh species) allows a shorter conditioning process. The surface reconstruction phenomena going on during catalytic activity are related to this effect.     

Double Stereoselection in the Hydrogenation over Cationic Rh(I) Complexes with Two Different Chiral Ligands

The catalytic activity and stereoselectivity in the hydrogenation of itaconic and -(acetylamino)cinnamic acids were studied in the presence of the complex [Rh(COD)(L¹)₂]⁺ TfO^- (where COD is cyclooctadiene and L¹ is (1S,2S,5R)-(+)-neomenthyldiphenylphosphine] which was generated in situ. The optical yield of the hydrogenation of itaconic acid increases both on addition of chiral (4S,5S)-(+)-2,2-dimethyl-4,5-bis(dimethylaminomethyl)-1,3-dioxolane (L²) as an auxiliary ligand to the complex [Rh(COD)(L¹)₂]⁺ TfO^- and on addition of achiral and chiral tertiary phosphines to the complex [Rh(L²)₂]⁺ TfO^-. The result of joint action of two ligands can be regarded as "matched effect." Transformations of the complexes in a hydrogen atmosphere were examined by ¹H and ^{3 1}P NMR spectroscopy. It was found that at least three complexes: diamine complex [Rh(L²)₂]⁺ TfO^-, solvate complex [Rh(L¹)₂(solv)₂]⁺ TfO^-, and diamine-bis-phosphine complex [Rh(L¹)₂L²]⁺ TfO^- may be catalytic precursors.     

Iridium and Rhodium Complexes within a Macroreticular Acidic Resin: A Heterogeneous Photocatalyst for Visible‐light Driven H2 Production without an Electron Mediator

Direct ion exchange of cyclometalated iridium(III) and tris‐2,2′‐bipyridyl rhodium(III) complexes, of which the former acts as a photosensitizer and the latter as a proton reduction catalyst, within a macroreticular acidic resin has been accomplished with the aim of developing a photocatalyst for H₂ production under visible‐light irradiation. Ir L_III‐edge and Rh K‐edge X‐ray absorption fine structure (XAFS) measurements suggest that the Ir and Rh complexes are easily accommodated in the macroreticular space without considerable structural changes. The photoluminescence emission of the exchanged Ir complex due to a triplet ligand charge‐transfer (³LC) and metal‐to‐ligand charge‐transfer (³MLCT) transition near 550 nm decreases with increasing the amount of the Rh complex, thus suggesting the occurrence of an electron transfer from Ir to Rh. The Ir‐Rh/resin catalyst behaves as a heterogeneous photocatalyst capable of both visible‐light sensitization and H₂ production in an aqueous medium in the absence of an electron mediator. The photocatalytic activitity is strongly dependent on the amount of the components and reaches a maximum at a molar ratio of 2:1 of Ir/Rh complexes. Moreover, leaching and agglomeration of the active metal complexes are not observed, and the recovered photocatalyst can be recycled without loss in catalytic activity.     

Rhodium(I) carbonyl complexes of triphenylphosphine chalcogenides and their catalytic activity

Rhodium(I) carbonyl complexes [Rh(CO)₂ClL] where L = Ph₃PO, Ph₃PS and Ph₃PSe, were synthesized and characterized by elemental analysis, i.r. and by ¹H-, ¹³C- and ³¹P-n.m.r. spectroscopy. The vBD;(CO) band frequencies in the complexes follow the order: Ph₃PO > Ph₃PS > Ph₃PSe, in keeping with the hard/soft nature of the interactions. The complexes undergo oxidative additions with electrophiles such as MeI, PhCH₂Cl and I₂ to give, e.g. [Rh(CO)(COMe)ClIL] which react with PPh₃ to give trans-[Rh(CO)Cl(PPh₃)₂]. The catalytic activity of the [Rh(CO)₂ClL] complexes in carbonylation of MeOH is higher than that of the well-known [Rh(CO)₂I₂]⁻ species. This revised version was published online in June 2006 with corrections to the Cover Date.     

Investigation and Comparison of the Mechanistic Steps in the [(Cp*MCl2)2] (Cp*=C5Me5; M=Rh,Ir)‐Catalyzed Oxidative Annulation of Isoquinolones with Alkynes

The mechanism of the [(Cp*MCl₂)₂] (M=Rh, Ir)‐catalyzed oxidative annulation reaction of isoquinolones with alkynes was investigated in detail. In the first acetate‐assisted C? H‐activation process (cyclometalated step) and the subsequent mono‐alkyne insertion into the M? C bonds of the cyclometalated compounds, both Rh and Ir complexes participated well. However, the desired final products, dibenzo[a,g]quinolizin‐8‐one derivatives, were only formed in high yield when the Rh species participated in the final oxidative coupling of the C? N bond. Moreover, a Rh^I sandwich intermediate was isolated during this transformation. The iridium complexes were found to be inactive in the oxidative coupling processes. All of the relevant intermediates were fully characterized and determined by single‐crystal X‐ray diffraction analysis. Based on this mechanistic study, a Rh^III→Rh^I→Rh^III catalytic cycle was proposed for this reaction.