尺寸效应对二硫化钼量子点光学性能的影响

通过油溶法成功地制备出不同粒径大小的二硫化钼,并探究了单层二硫化钼尺寸效应对荧光性质的影响。其中反应时间为3 h制备出的二硫化钼量子点为单层结构,3种尺寸的二硫化钼的荧光光谱和拉曼光谱研究表明,当粒径或激发波长增大时,荧光谱图中峰位发生红移。     

退火对单层二硫化钼荧光特性的影响

单层二硫化钼是继石墨烯后的一种新型二维材料. 它是一种直接带隙半导体, 具有优异的光电特性, 从而受到人们的广泛关注. 之前的研究报道过单层二硫化钼在氩气中退火后可以提升其A激子峰的荧光强度, 但我们发现, 空气中退火较氩气退火效果更为明显. 本文重点研究了在空气中退火对二硫化钼的荧光特性的影响. 不同条件下制备的单层二硫化钼样品, 经过在空气中退火处理后, 荧光峰位均发生了蓝移, 荧光强度提升了一个数量级. 我们认为, 这是由于空气退火造成二硫化钼缺陷的形成, 大量氧气分子被缺陷束缚并发生电荷转移. 氧气分子充当受主的角色, 起着P型掺杂的作用. 电荷的抽取造成二硫化钼的负电激子减少, 中性激子增多, 提升了其荧光量子效率. 我们在对照实验中发现, NH₃吸附在二硫化钼表面时, 荧光强度下降, 峰位红移, 这是由于NH₃分子充当施主的角色, 造成负电激子增多, 中性激子减少. 本文为提高单层二硫化钼的荧光量子效率提供了一种简单有效的方法.     

一种Q态纳米CdS的新型制备法——聚合物分散法

采用一种Q态CdS的新型制备法——聚合物分散法, 即用水溶性聚合物溶液作为分散剂, 用2-巯基乙醇(或十二硫醇)作表面修饰剂, 在聚合物网络中构筑出四种粒径的、单分散性的Q-CdS. 通过UV-Vis光谱和TEM考察了Q-CdS的粒径及分布情况, 并用FL光谱研究了不同尺寸的Q-CdS的荧光性能. 结果表明, 采用聚合物分散法可以方便、快捷地得到粒径小且分布窄的Q-CdS纳米粒子, 这些粒子在紫外光谱及荧光光谱上均表现出明显的量子尺寸效应.     

单层和双层二硫化钼化学气相沉积生长的动力学蒙特卡罗模拟研究（英文）

通过化学气相沉积方法,可控合成所需层数的二硫化钼仍然是一个挑战。因此,建立一个能够定量预测单层和多层二硫化钼生长的理论模型,并为实验制备提供指导,是十分必要的。在本文中,我们建立了一个动力学蒙特卡罗模型,来预测单层和双层二硫化钼的化学气相沉积生长。首先,我们提出了第一层和第二层的生长速率受吸附原子浓度分布的控制,以及紧凑三角形二硫化钼的生长过程为扭结成核和传播。其中,原子浓度是由吸附原子流量,吸附原子的有效寿命,生长温度,边的单位长度能量,单层和双层的单位面积结合能,成核准则决定的。扭结成核和传播是由锯齿边和扶手边附加原子所需的能量势垒决定的。然后,我们采用热力学理论准则对这些参数进行了标定。通过标定的动力学蒙特卡罗模型,我们发现第二层的生长速率与第一层的尺寸有很强的依赖性。随着第一层尺寸增加,第二层的生长速率呈单调递减趋势,甚至在第一层达到某个尺寸时,第二层的生长会被抑制。此外,我们还分析了不同生长温度和吸附原子流量下,双层二硫化钼的尺寸和形貌演化。在双层二硫化钼的整个生长过程中,第一层和第二层的形貌保持紧凑三角形,验证了扭结成核和传播模型的正确性。模拟结果表明,生长温度的升高或吸附原子流量的降低,促进了双层二硫化钼的生长,这与已报导的实验结果相吻合。生长温度升高使得第二层二硫化钼边缘的吸附原子浓度,随着远离第二层边缘的吸附原子浓度降低而相应降低,促进了双层二硫化钼的生长。同样,吸附原子流量降低减小了基体上的吸附原子浓度,降低了第一层远离边缘和靠近边缘的吸附原子浓度差,从而减缓了第一层的生长。第一层的生长减慢,减缓了第二层远离边缘和靠近边缘的吸附原子浓度差减小到零,从而促进双层二硫化钼的生长。为了更好地指导实验,我们进一步构建了双层二硫化钼生长的相图,可通过控制生长温度和吸附原子流量来实现或阻止双层二硫化钼的生长。因此,本工作不仅揭示了单层和双层二硫化钼生长所需的实验条件,而且为可控合成所需层数的二硫化钼提供了详细指导。     

氢氧根辅助大面积单层二硫化钼在不同衬底上的生长

<正>二硫化钼是一种典型的二维材料,因为其优异的电学、光学性能和良好的机械柔韧性引起人们的广泛关注~1。单层二硫化钼由于高的载流子迁移率和超薄的厚度,被广泛应用在半导体场效应管和光探测器中~2,生长大面积高质量的单层二硫化钼也一直是大家的研究目标。目前制备大面积单层二硫化钼的主流方法还是化学气相沉积法     

新型铕配合物二氧化硅荧光纳米粒子DPPDA-Eu~(3+)/SiO_2的制备与表征

本文首先合成配位体4,7-二苯基-1,10-菲罗啉-2,9-二羧酸(DPPDA,C_(26)H_(16)N_2O_4)及铕配合物DPPDA-Eu~(3+)((C_(26)H_(16)N_2O_4)_2Eu·15H_2O),然后采用反相微乳液法,通过正硅酸乙酯和3-氨丙基三甲氧基硅烷的共水解、聚合作用成功制备出表面带氨基的二氧化硅包裹铕配合物DPPDA-Eu~(3+)的核壳型荧光纳米颗粒DPPDA-Eu~(3+)/SiO_2。利用透射电子显微镜、荧光光谱、紫外-可见光谱等手段进行表征,并进行了光稳定性、荧光泄露与氨基测定等实验,结果表明所制备的纳米粒子呈规则球状,大小均匀,粒径为80±8nm,具有良好的单分散性和光稳定性,不易发生荧光分子从二氧化硅壳层中泄露,纳米粒子表面带有氨基,可不需要进行表面修饰而直接与生物分子反应。该纳米粒子可望作为一种新型的稀土荧光探针应用于时间分辨荧光免疫分析、生物芯片及生物传感器等。     

聚丙烯酸功能化高效发光的La_(1-x)Eu_xF_3纳米晶合成及细胞成像（英文）

采用水热合成一锅法制备了聚丙烯酸功能化单分散的La_(1-x)Eu_xF_3纳米颗粒(La_(1-x)Eu_xF_3@PAA NPs)。利用透射电子显微镜(TEM)、X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)和光致发光光谱(PL)对样品的形貌、结构、组成和荧光性能进行表征。该纳米颗粒平均粒径为(7±3)nm,具有较好的分散性、稳定性与生物相容性。将纳米颗粒与He La癌细胞共同孵育,体外成像结果表明材料对He La癌细胞显示出低细胞毒性。用水热法制备的La_(1-x)Eu_xF_3@PAA纳米颗粒可以作为光学荧光探针用于细胞成像,在生物医学领域表现出巨大的潜力。     

一步水热法制备氮掺杂碳点用于Fe3+检测及细胞成像

以生物相容性优异的人体必需氨基酸分子色氨酸和苏氨酸为前驱体,通过一步水热法合成了水溶性良好的蓝色荧光氮掺杂碳点(N-CDs).采用高分辨率透射电镜、X射线衍射光谱、X射线光电子能谱、傅里叶红外吸收光谱、紫外可见吸收光谱、荧光光谱对其结构、组成和光学性质进行研究.结果表明所制备的N-CDs尺寸均一,平均粒径为4.1 nm...     

ZnO/SAPO-34组装体的制备及发光性质研究

以微孔分子筛SAPO-34为主体，采用锌盐浸渍-灼烧的方法，在SAPO-34的菱沸石笼中制备出ZnO纳米粒子，并对不同温度下灼烧后得到的ZnO/SAPO-34组装体的发光性质进行了研究。由于SAPO-34菱沸石笼的尺寸所限，制备出来的ZnO粒子粒径小于1 nm。量子尺寸效应使得SAPO-34笼中的ZnO纳米粒子的荧光光谱在近紫外区的发射谱峰有明显的蓝移。     

类石墨烯二硫化钼及其在光电子器件上的应用

由单层或几层二硫化钼构成的类石墨烯二硫化钼(graphene-like MoS₂)是一种具有类似石墨烯结构和性能的新型二维(2D)层状化合物, 近年来以其独特的物理、化学性质而成为新兴的研究热点. 本文综述了近年来类石墨烯二硫化钼常见的几种制备方法, 包括以微机械力剥离、锂离子插层和液相超声法等为主的“自上而下”的剥离法, 以及以高温热分解、水热法等为主的“自下而上”的合成法; 介绍了其常用的结构表征方法, 包括原子力显微镜(AFM)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和拉曼光谱等; 概述了类石墨烯二硫化钼的紫外-可见(UV-Vis)吸收、荧光发射等基本光物理性质及其相关机理; 总结了类石墨烯二硫化钼在二次电池、场效应晶体管、传感器、有机电致发光二极管和电存储等光电子器件领域的应用原理及其研究进展, 展望了这类新型二维层状化合物的研究前景.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.