利用高活性和重复性的银薄膜衬底SERS检测芥子气及其水解产物

通过化学浴沉积的方法制备了一种高SERS活性和重复性的银薄膜衬底。分别采用扫描电子显微镜和拉曼光谱研究了沉积时间对银薄膜微观形貌和SERS活性的影响, 优化的沉积时间为120分钟。利用优化的银薄膜衬底, 可以检测到10-9 M 的罗丹明分子的SERS谱图, 表明该银薄膜衬底具有很高的SERS活性。相同实验条件下, 在一片银薄膜衬底上任意选择16个点测试R6G的SERS谱图。分别计算了R6G的8个特征峰16次检测的相对标准偏差, 最大相对标准偏差小于13% 。实验结果表明, 该衬底具有很好的重复性, 可应用于SERS 的定量分析。采用优化的银薄膜衬底检测了不同浓度的芥子气及其水解产物硫二甘醇。分别结合芥子气和硫二甘醇的常规拉曼光谱和文献报道, 对它们的SERS谱图进行了指认和归属。20分钟内, 对芥子气和硫二甘醇的检测限可分别达到320 ppm和1 ppm (g/g)。     

Fabrication and characterization of SERS‐active silver clusters on glassy carbon

In this article, a novel technique for the fabrication of surface enhanced Raman scattering (SERS) active silver clusters on glassy carbon (GC) has been proposed. It was found that silver clusters could be formed on a layer of positively charged poly(diallyldimethylammonium) (PDDA) anchored to a carbon surface by 4‐aminobenzoic acid when a drop containing silver nanoparticles was deposited on it. The characteristics of the obtained silver clusters have been investigated by atomic force microscopy (AFM), SERS and an SERS‐based Raman mapping technique in the form of line scanning. The AFM image shows that the silver clusters consist of several silver nanoparticles and the size of the clusters is in the range 80–100 nm. The SERS spectra of different concentrations of rhodamine 6G (R6G) on the silver clusters were obtained and compared with those from a silver colloid. The apparent enhancement factor (AEF) was estimated to be as large as 3.1 × 10⁴ relative to silver colloid, which might have resulted from the presence of ‘hot‐spots’ at the silver clusters, providing a highly localized electromagnetic field for the large enhancement of the SERS spectra of R6G. The minimum electromagnetic enhancement factor (EEF) is estimated to be 5.4 × 10⁷ by comparison with the SERS spectra of R6G on the silver clusters and on the bare GC surface. SERS‐based Raman mapping technique in the form of line scanning further illustrates the good SERS activity and reproducibility on the silver clusters. Finally, 4‐mercaptopyridine (4‐Mpy) was chosen as an analyte and the lowest detected concentration was investigated by the SERS‐active silver clusters. A concentration of 1.6 × 10⁻¹⁰ M 4‐Mpy could be detected with the SERS‐active silver clusters, showing the great potential of the technique in practical applications of microanalysis with high sensitivity. Copyright © 2006 John Wiley & Sons, Ltd.     

A simple method for the preparation of ultrahigh sensitivity surface enhanced Raman scattering (SERS) active substrate

By immersing mica modified with cetyltrimethylammonium bromide (CTAB) into the silver colloid, a high efficient surface enhanced Raman scattering (SERS) active substrate was formed within 2 h at room temperature. The limit of detection of the substrate for Rhodamine 6G is up to 1×10⁻¹⁴ M. Changing the concentration of silver colloid and the treating time, various silver aggregates such as nanocrystals, clusters and films were found, and the SERS spectra of these aggregates were also obtained. The results of SERS revealed that CTAB could accelerate aggregation of the silver colloid and cause great Raman enhancement. Bilayer of CTAB is very important for aggregation of silver colloid and the aggregation extent is the main factor for the enormous enhancement on this substrate.     

Characterization and optimization of AuNPs labeled by Raman reporters on glass based on silver enhancement

In this report, gold nanoparticles (AuNPs) labeled by Raman reporters (AuNPs‐R6G) were assembled on glass and used as the seeds to in situ grow silver‐coated nanostructures based on silver enhancer solution, forming the nanostructures of AuNPs‐R6G@Ag, which were characterized by scanning electron microscopy (SEM) and UV‐visible spectroscopy. More importantly, the obtained silver‐coated nanostructures can be used as a surface enhancement Raman scattering (SERS) substrate. The different SERS activities can be controlled by the silver deposition time and assembly time of AuNPs‐R6G on glass. The results indicate that the maximum SERS activity could be obtained on AuNPs‐R6G when these nanostructures were assembled on glass for 2 h with silver deposition for 2 min. In addition, the reproducibility of SERS signal on the fabricated nanostructures is very high with the intensity error lower than 15%, which has great promise as a probe for application in bioanalysis. Copyright © 2008 John Wiley & Sons, Ltd.     

微波法制备银胶体及其在表面增强拉曼散射中的应用

本文提出了一种利用微波加热的原理,合成一种新型的银胶体溶液。该银胶具有高效的表面增强拉曼活性。以这种新型银胶体粒子作为活性衬底,测得的强荧光物质R6G的表面增强拉曼光谱,体现出荧光背景低,信噪比高的特点。通过两种不同方法制备的银胶体粒子的表面增强拉曼散射效果的比较,发现这种新型银胶纳米粒子通过聚集,形成更多的具有很强的提高样品表面增强拉曼散射强度作用的“热点”,从实验的角度验证了表面增强拉曼中的“热点”理论。     

三维金字塔立体复合基底表面增强拉曼散射特性

表面增强拉曼散射(SERS)是一种广泛应用于化学反应检测、医学诊断和食品分析等领域的高灵敏度光谱技术.基底结构的构建对提高探针分子的SERS信号有非常重要的影响.本文利用聚甲基丙烯酸甲酯(PMMA)包裹银纳米颗粒制备了一种三维金字塔立体复合SERS基底,实现了对罗丹明6G (R6G)分子的高灵敏度检测.通过调节银纳米颗粒在PMMA丙酮溶液中的分散密度,实现了光在金字塔谷内的有效振荡,既保证了三维结构高密度的"热点"效应,又避免了由于金属-分子相互作用引起的吸附探针分子变形导致的信号失真等问题.同时,有效防止了银纳米颗粒的氧化,为探针分子提供更大的电磁增强作用范围,使增强的拉曼信号产生稳定的输出.此研究结果不仅提供了一种高性能、可重复使用的SERS基底的有效策略,也会对未来设计改进三维结构的SERS基底有指导意义.     

一种简单的方法制备SERS基底用于染料分子的富集、降解与检测

用一种简单的方法制备银纳米粒子, 研究了此纳米粒子作为SERS基底、吸附剂和光催化剂的多功能性。在光照条件下研究其对染料分子的光催化性能, 用紫外光谱和表面增强拉曼光谱对整个光催化过程进行动态跟踪检测, 实验结果表明染料分子光照条件下确实被催化降解了。本实验不仅合成了多功能的基底材料, 还赋予了表面增强拉曼光谱新的应用价值, 为光催化实验提供了新的动态跟踪检测方法。     

Use of atomic layer deposition to improve the stability of silver substrates for in situ,high‐temperature SERS measurements

A method to stabilize silver surface‐enhanced Raman spectroscopy (SERS) substrates for in situ, high‐temperature applications is demonstrated. Silver island films grown by thermal evaporation were coated with a thin layer (from 2.5 to 5 nm) of alumina by atomic layer deposition (ALD), which protects and stabilizes the SERS‐active substrate without eliminating the Raman enhancement. The temporal stability of the alumina‐coated silver island films was examined by measurement of the Raman intensity of rhodamine 6G molecules deposited onto bare and alumina‐coated silver substrates over the course of 34 days. The coated substrates showed almost no change in SERS enhancement, while the uncoated substrates exhibited a significant decrease in Raman intensity. To demonstrate the feasibility of the alumina‐coated silver substrate as a probe of adsorbates and reactions at elevated temperatures, an in situ SERS measurement of calcium nitrate tetrahydrate on bare and alumina‐coated silver was performed at temperatures ranging from 25 to 400 °C. ALD deposition of an ultrathin alumina layer significantly improved the thermal stability of the SERS substrate, thus enabling in situ detection of the dehydration of the calcium nitrate tetrahydrate at an elevated temperature. Despite some loss of Raman signal, the coated substrate exhibited greater thermal stability compared to the uncoated substrate. These experiments show that ALD can be used to synthesize stable SERS substrates capable of measuring adsorbates and processes at high temperature. Copyright © 2009 John Wiley & Sons, Ltd.     

银/硅纳米孔柱阵列活性基底的SERS效应研究

以硅纳米孔柱阵列(Si-NPA)为衬底,采用浸渍法制备出一种具有规则表面形貌特征的银/硅纳米孔柱阵列(Ag/Si-NPA),并以R6G为探测目标材料,对其表面增强拉曼(SERS)效应进行了研究。结果表明,对于R6G浓度低至10-15M,Ag/Si-NPA均能表现出清晰的特征SERS峰。随着浓度的降低,R6G的荧光淬灭,所测拉曼光谱的基线降低,但特征峰峰位基本保持不变。在低浓度10-15M时得到的SERS光谱,理论上证明为单分子光谱。此外,Ag/Si-NPA活性基底具有较好的稳定性,在长达28天的自然老化过程中,Ag/Si-NPA能够保持对R6G较高的探测水平,光谱具有较好的信噪比和分辨率。Ag/Si-NPA是一种理想的SERS活性基底。     

Thiol‐immobilized silver nanoparticle aggregate films for surface enhanced Raman scattering

We report a novel method for the fabrication of films of silver nanoparticle aggregates that are strongly attached to Si substrates (Thiol‐immobilized silver nanoparticle aggregates or TISNA). The attachment is achieved by chemically modifying the surface of a Si(100) surface in order to provide SH groups covalently linked to the substrate and then aggregating silver nanoparticles on these thiol covered surfaces. The transmission electron microscopy (TEM), scanning electron microscopy (SEM) and atomic force microscopy (AFM) characterization show a high coverage with single nanoparticles or small clusters and a partial coverage with fractal aggregates that provide potential hot spots for surface enhanced Raman scattering (SERS). We have confirmed the SERS activity of these films by adsorbing rhodamine 6G and recording the Raman spectra at several concentrations. By using the silver‐chloride stretching band as an internal standard, the adsorbate bands can be normalized in order to correct for the effects of focusing and aggregate size, which determine the number of SERS active sites in the focal area. This allows a quantitative use of SERS to be done. The adsorption–desorption of rhodamine 6G on TISNA films is reversible. These features make our TISNA films potential candidates for their use in chemical sensors based on the SERS effect. Copyright © 2008 John Wiley & Sons, Ltd.     

电沉积花状Au@R6G复合纳米粒子及其表面增强拉曼散射活性

采用循环伏安法(CV), 在ITO玻璃表面一步法电沉积了花状的Au@R6G(罗丹明6G)复合纳米粒子膜, 该膜呈现很强的表面增强拉曼散射(SERS)活性, 比传统制备金膜的方法提高了一个数量级。采用扫描电子显微镜(FE-SEM), X射线衍射光谱(XRD), 拉曼光谱对复合纳米粒子进行表征。通过实验发现, 电沉积20圈时的Au@R6G样品SERS信号增强最为显著, R6G的SERS检测限可达到10-10 M。     

Enhancements in intensity and thermal stability of Raman spectra based on roughened gold substrates modified by underpotential deposition of silver

In this study, electrochemically roughened gold is modified with underpotential deposition (UPD) silver to investigate the effects on enhancements in the intensity and the thermal stability of surface‐enhanced Raman scattering (SERS). The SERS of Rhodamine 6G (R6G) adsorbed on the UPD Ag‐modified Au substrate exhibits a higher intensity by six‐fold of magnitude, as compared with that of R6G adsorbedon the unmodified Au substrate. Moreover, the SERS enhancement capabilities of UPD Ag‐modified Au and unmodified Au substrates are seriously depressed at temperatures higher than 200 and 150 °C, respectively. It indicates that the modification of UPD Ag can significantly depress the thermal destruction of SERS‐active substrates. Copyright © 2009 John Wiley & Sons, Ltd.     

退火法制备石墨烯-银纳米粒子及其增强拉曼实验

针对目前SERS基底上金属颗粒制备过程中存在的分布不均匀、易氧化和稳定性差等缺点,通过热蒸镀和高温退火获得分布均匀的SERS基底;同时结合石墨烯优良的光学性能、化学惰性、荧光猝灭以及本身的SERS增强等优点,制备了稳定的石墨烯-银纳米颗粒（GE/AgNPs）复合结构SERS基底。通过GE/AgNPs复合结构的拉曼光谱稳定性试验证明了石墨烯在GE/AgNPs结构中起到隔绝银纳米颗粒与空气直接接触及催化氧化银脱氧的作用,有利于SERS基底的时间稳定性。(1) 石墨烯、Ag纳米颗粒及其复合结构的制备。首先采用热蒸镀和高温退火的方法使Ag纳米颗粒均匀地沉积在SiO₂/Si基底上,再采用化学气相沉积法在Cu箔上制备少层石墨烯,并用湿法转移法将石墨烯转移到目标基底上,并实验研究了以不同的退火顺序对GE/AgNPs基底造成的影响。(2) 石墨烯、Ag纳米颗粒及其复合基底的表征。分别采用光学显微镜、扫描电子显微镜和拉曼光谱进行表征,得到转移后的纯石墨烯较完整地覆盖在SiO₂/Si基底上面,表面比较平整,但在少数地方仍然存在褶皱和杂质;SEM表征结果表明对于不同制备流程的GE/AgNPs复合结构上的Ag纳米颗粒基本呈球形。基本符合Ostwald熟化理论,通过对退火温度和时间的控制能获得平均粒径在40~60 nm的银颗粒,且分布较均匀。此外,在不同退火顺序中,石墨烯的加入对银纳米颗粒的扩散形成扩散势垒,从而出现较大的不规则的颗粒。(3) 基底稳定性试验和仿真分析。通过基底本身的Raman mapping测试,分析了石墨烯拉曼特征峰峰值和半高宽的变化,得知基底对石墨烯本身的拉曼增强效果主要来源于银纳米颗粒间的电磁场增强。同时采用浓度为10-6 mol·L-1的罗丹明6G (R6G)水溶液作为探针分子,对转移了石墨烯的GE/AgNPs复合基底和未转移石墨烯的Ag纳米颗粒基底进行了SERS稳定性实验。结果表明GE/AgNPs复合基底在1~33 d内衰减较缓慢,30 d后仍能探测到拉曼信号约为原来信号的35.1%~40.6%;而纯Ag基底上随着Ag纳米颗粒在空气中迅速氧化,基底的SERS性能显著下降,在30 d后只有原来信号的5.9%~11.3%。此外,通过实验得到覆盖了石墨烯之后的增强因子约为6.05×105。最后采用时域有限差分算法（FDTD）计算了复合结构的电磁场分布和理论增强因子,其理论增强因子可以达到5.7×105。实验和仿真结果的差异,主要是源于石墨烯的化学增强作用。     

Glass‐embedded silver nanoparticle patterns by masked ion‐exchange process for surface‐enhanced Raman scattering

Glass‐embedded silver nanoparticle patterns were fabricated by masked silver–sodium ion‐exchange process followed by etching to reveal the particles for surface‐enhanced Raman scattering (SERS). The intensity of the enhanced Raman signal is comparable to that of the fluorescence, and the detection limit of 1 nM for Rhodamine 6G has been achieved. Raman images at different etching depths and corresponding morphological images are compared to find optimal SERS signal. Our results demonstrate that silver nanoparticle patterns embedded in glass can be used as SERS‐active substrates. Nanoparticles can be formed in a glass of high optical quality and have potential to be integrated with optical waveguides for a sensor chip. Copyright © 2010 John Wiley & Sons, Ltd.     

Ag纳米粒子修饰聚合物纳米尖锥阵列的SERS衬底制备

表面增强拉曼散射(SERS)以其无损、超灵敏、快速检测分析等优点而备受关注,在化学和生物传感等应用领域有着极大的潜力。研制灵敏度高、重复性强、稳定性好的SERS基底,对于实现其在痕量分析、生物诊断中的实际应用具有重要意义。具有微/纳米结构的聚合物具有优异的机械性能、光学性能、耐化学性等优点。通过模板压印法,利用多孔阳极氧化铝(AAO)在聚合物聚碳酸酯(PC)表面制备一种高度有序的纳米PC尖锥阵列结构,然后通过蒸发镀膜在PC尖锥阵列上沉积一层银膜,制备了大面积Ag纳米颗粒修饰的高度有序聚合物纳米尖锥阵列。高曲率纳米针状结构顶端的银颗粒及颗粒之间狭小的纳米间隙能产生大量的SERS"热点"。这种方法得到了均匀,可重复,大面积高增强的SERS活性基底,并进一步研究了不同沉积厚度银膜的SERS特性。用扫描电子显微镜(SEM)对其进行了表征,以结晶紫作为探针分子对这种结构进行研究。结果表明:拉曼信号强度随银厚度的增加显示为先增强后减弱的趋势。基底对结晶紫的拉曼增强因子达到5.4×10~6,基底主要拉曼峰强度的RSD为10%,说明该基底具有很好的检测灵敏性和重复性。此外,基底在存放40 d后,在相同条件下仍然保持着高SERS性能,表现出很好的稳定性。整个制备过程简单易行,重复性好,制作成本非常低廉,而且能够规模化制备,可方便地作为活性基底应用于SERS研究,必将具有广阔的研究和应用前景。     

Self‐assembled silver nanoparticle monolayer on glassy carbon: an approach to SERS substrate

In this paper, the fabrication of an active surface‐enhanced Raman scattering (SERS) substrate by self‐assembled silver nanoparticles on a monolayer of 4‐aminophenyl‐group‐modified glassy carbon (GC) is reported. Silver nanoparticles are attached to the substrate through the electrostatic force between the negatively charged silver nanoparticles and the positively charged 4‐aminophenyl groups on GC. The active SERS substrate has been characterized by means of tapping‐mode atomic force microscopy (AFM), indicating that large quantities of silver nanoparticles are uniformly coated on the substrate. Rhodamine 6G (R6G) and p‐aminothiophenol (p‐ATP) are used as the probe molecules for SERS, resulting in high sensitivity to the SERS response, with the detection limit reaching as low as 10⁻⁹ M . This approach is easily controlled and reproducible, and more importantly, can extend the range of usable substrates to carbon‐based materials for SERS with high sensitivity. Copyright © 2007 John Wiley & Sons, Ltd.     

石墨烯-银纳米颗粒复合结构制备工艺优化及表面增强拉曼光谱特性

在石墨烯-Ag纳米颗粒复合结构表面增强拉曼散射（SERS）基底常规制备工艺的基础上,提出了采用偶联剂吸附的方法来改善Ag纳米颗粒在目标基底上分布的均匀性;采用双层聚甲基丙烯酸甲酯（PMMA）来转移石墨烯,以减少石墨烯表面的缺陷;采用退火处理的方法来降低SERS基底的拉曼背景噪声,从而提高拉曼光谱的对比度。实验结果表明,采用优化制备工艺得到的复合结构SERS基底均匀性有较大提高,石墨烯G峰和2D峰的增强拉曼光谱对比度分别提高了54.9%和64.3%,罗丹明6G（R6G）分子在774和1 363 cm-1处的拉曼光谱强度随浓度变化关系的拟合优度（R2）分别达到了0.997 5和0.986 7。     

树枝状银微米材料的制备及其表面增强拉曼光谱研究

为使表面增量拉曼散射(SERS)衬底的制备方法简单快速且提高的基底增强效果,采用置换反应的制备方法,用锌片和硝酸银反应制备出微米银结构SERS活性基底,其具有稳定性好,易保存,制备方法简单,过程快速等特点。用扫描电子显微镜观察得银微米材料表面形貌呈均匀对称的树枝状结构。实验中控制置换反应的时间分别为40,50,60 s时,得到的树枝状银微米材料的长度分别为3,5,10 μm左右,分支分别为700 nm,2 μm,3 μm,发现随着置换反应的时间的增长,微米银树枝及分枝的长度越长,且树枝分枝上逐渐长出纳米级“树叶”结构, 使得微米级银树枝表面具有纳米结构。并且将微米银材料置于硅片上作为SERS衬底,并以罗丹明6G为探针分子,用激发波长为1 064 nm的傅里叶变换拉曼光谱仪检测,研究其在表面增强拉曼光谱中的应用,结果表明树枝状银微米材料有很好的SERS特性,其中置换反应时间为40 s时制备的微米银树枝的增强效果最佳,其增强因子可达到103左右,并且采用用表面活性剂PVP处理硅片的方法后,保持其他条件不变,微米银衬底的SERS增强效果得到进一步加强,增强因子达到104左右。此外,将树枝状银微米材料用水可封存数月,且实验结果的重复性较好。     

Synthesis of indium–silver bimetallic nanocomposites for surface-enhanced Raman scattering

We report on the synthesis of indium–silver bimetallic nanocomposites by chemical reduction method under atmospheric condition and their activity for surface-enhanced Raman scattering (SERS). It is found that the indium–silver bimetallic nanocomposites have better SERS activity with larger enhancement factors (EF) than pure silver nanoparticles with similar size. The SERS EF can reach 10⁷ for 4-mercaptobenzoic acid and 10⁹ for crystal violet and rhodamine 6G adsorbed on the nanocomposites and the detection limits can be at least down to 10^?7 and 10^?10 M, respectively. The results demonstrate that the indium–silver bimetallic nanocomposites are promising as SERS substrate for a myriad of chemical and biological sensing applications.     

维生素K3的表面增强拉曼光谱研究

首次报道了维生素K3 (VK3 )分子的常规拉曼光谱 (NRS)及该分子在活性衬底银镜上的表面增强拉曼散射 (SERS) ,并对它的拉曼特征谱带进行了初步的指认和归属。通过对比VK3 的常规拉曼光谱和SERS谱 ,发现VK3 分子吸附在银表面后拉曼散射强度被大大增强了。另外 ,VK3 的羰基与银粒子发生电荷转移后形成负离子自由基 ,碳氧双键打开。受VK3 分子吸附在银镜表面的影响 ,萘环结构发生了很大的扰动 ,导致一些拉曼特征峰产生位移 ,环变形振动对应的拉曼散射强度得到了增强。这些研究结果为SERS技术今后对VK3进行药物检测以及痕量分析方面的应用提供了依据。