Ferrioxamine B analogues: targeting the FoxA uptake system in the pathogenic Yersinia enterocolitica

A series of ferrioxamine B analogues that target the bacterium Yersinia enterocolitica were prepared. These iron carriers are composed of three hydroxamate-containing monomeric units. Two identical monomers consist of N-hydroxy-3-aminopropionic acid coupled with beta-alanine, and a third unit at the amino terminal is composed of N-hydroxy-3-aminopropionic acid and one of the following amino acids: beta-alanine (1a), phenylalanine (1b), cyclohexylalanine (1c), or glycine (1d). Thermodynamic results for representatives of the analogues have shown a strong destabilization (3-4 orders of magnitude) of the ferric complexes with respect to ferrioxamine B, probably due to shorter spacers and a more strained structure around the metal center. No significant effect of the variations at the N-terminal has been observed on the stability of the ferric complexes. By contrast, using in vivo radioactive uptake experiments, we have found that these modifications have a substantial effect on the mechanism of iron(III) uptake in the pathogenic bacteria Yersinia enterocolitica. Analogues 1a and 1d were utilized by the ferrioxamine B uptake system (FoxA), while 1b and 1c either used different uptake systems or were transported to the microbial cell nonspecifically by diffusion via the cell membrane. Transport via the FoxA system was also confirmed by uptake experiments with the FoxA deficient strain of Yersinia enterocolitica. A fluorescent marker, attached to 1a in a way that did not interfere with its biological activity, provided additional means to monitor the uptake mechanism by fluorescence techniques. Of particular interest is the observation that 1a was utilized by the uptake system of ferrioxamine B in Yersinia enterocolitica (FoxA) but failed to use the ferrioxamine uptake route in Pseudomonas putida. Here, we present a case in which biomimetic siderophore analogues deliberately designed for a particular bacterium can distinguish between related uptake systems of different microorganisms.     

Label-free detection of a bacterial pathogen using an immobilized siderophore, deferoxamine

Pathogenic bacteria obtain the iron necessary for survival by releasing an iron chelator, termed a siderophore, and retrieving the iron-siderophore complex via a cell surface siderophore receptor. We have exploited the high affinity of Yersinia enterocolitica for its siderophore, deferoxamine, to develop a rapid method for capture and identification of Yersinia. In this methodology, a deferoxamine-bovine serum albumin conjugate is printed onto a gold-plated chip in a parallel line pattern. After flowing a suspension of Yersinia across the siderophore-derivatized chip, any Yersinia that binds to the chip is detected by dark-field microscopy analysis of the scattered light, followed by Fourier transform analysis of the scattering pattern. Since peak intensities are found to correlate with pathogen concentration, pathogen titers as low as 10(3) cfu/ml can be readily detected. Moreover, immobilized deferoxamine can distinguish Y. enterocolitica, which binds ferrioxamine (deferoxamine-Fe), from Staphylococcus aureus, Mycobacterium smegmatis and Pseudomonas aeruginosa, which don't. Because human pathogens cannot easily mutate their iron retrieval systems without loss of viability, we suggest that few if any mutant Yersinia will emerge that can avoid detection. Together with previous results demonstrating selective capture of Pseudomonas aeruginosa by its immobilized siderophore (pyoverdin), these data suggest that pathogen-specific siderophores may constitute effective and immutable capture ligands for rapid detection and identification of their cognate pathogens.     

Electrocatalytic oxidation and sensitive detection of deferoxamine on nanoparticles of Fe2O3@NaCo[Fe(CN)6]-modified paste electrode

Electrocatalytic oxidation of deferoxamine was studied on carbon paste electrodes modified with nanoparticles of iron(III) oxide core-cobalt hexacyanoferrate-shell using cyclic voltammetry and chronoamperometry. Voltammetric curves represented two quasi-reversible redox transitions which in the presence of deferoxamine, the two anodic peak currents increased, followed by decreases in the corresponding cathodic currents. This indicated that deferoxamine was oxidized on the immobilized cobalt hexacyanoferrate via two electrocatalytic steps. The rate constants, the electron transfer coefficients and the diffusion coefficient involved in the electrocatalytic oxidation of deferoxamine were reported. A sensitive and time-saving determination procedure was developed for the analysis of the drug in both batch and flow systems, and the corresponding analytical parameters were reported. The proposed amperometric method was also successfully applied to the direct assays of spiked human serum with iron–drug complex.     

Electrospray ionisation-mass spectrometry of hydroxamate siderophores

Electrospray ionisation-mass spectrometry (ESI-MS) was applied to the detection of the iron complexes of the hydroxamate type siderophores ferrioxamine (FO), ferrichrome (FC) and iron(III) rhodotoluate (FR). Mass spectra of the three siderophores produced by ESI-MS were dominated by the protonated (M + 1)+ parent ions, except for FR at pH 4.3, which was present as the positively charged 1:1 complex. On collision with He ions, fragmentation proceeded largely via cleavage of C-N bonds. Flow injection analysis of the siderophores with detection by ESI-MS produced detection limits of 1.9 fmol for FO, 31.1 fmol for FC and 524 fmol for FR.     

Crystal and molecular structures of ionophore-siderophore host-guest supramolecular assemblies relevant to molecular recognition

Ionophore-siderophore host-guest assemblies composed of 18-crown-6 and ferrioxamine B, benzo-18-crown-6 and ferrioxamine B, and cis-syn-cis-dicyclohexano-18-crown-6 and ferrioxamine B were successfully crystallized, and their structures were determined by single-crystal X-ray diffraction. All three crystal lattices also include solvated Mg(II) and perchlorate ions. The ionophore-siderophore host-guest assembly is noncovalently held together by a hydrogen bonding interaction between the pendant protonated amine in the second coordination sphere of ferrioxamine B and the hydrogen bond acceptor oxygen atoms in the crown ether. The crystals of 18-crown-6:ferrioxamine B host-guest assembly are monoclinic, with space group P2(1)/c, and four molecules per unit cell with dimensions a = 19.8327(11) A, b = 20.4111(11) A, c = 15.1698(8) A, and beta = 96.435(1) degrees. The crystals of benzo-18-crown-6:ferrioxamine B host-guest assembly are triclinic, with space group P(-)1, and two molecules per unit cell with dimensions a = 11.1747(10) A, b = 16.0580(15) A, c = 18.4175(17) A, alpha = 80.469(3) degrees, beta = 81.481(3) degrees and gamma = 70.212(2) degrees. The crystals of cis-syn-cis-dicyclohexano-18-crown-6:ferrioxamine B host-guest assembly are monoclinic, with space group P2(1)/c, and four molecules per unit cell with dimensions a = 20.1473(13) A, b = 21.5778(15) A, c = 14.8013(10) A, and beta = 94.586(2) degrees. The crystal structures of all three host-guest assemblies contain a racemic mixture of Lambda-N-cis, cis and Delta-N-cis, cis coordination isomers of ferrioxamine B. The crystal structures indicate that the steric rigidity of the benzo-18-crown-6 and cis-syn-cis-dicyclohexano-18-crown-6 cavity has a pronounced effect on the conformation of the crown ring and ultimately on the hydrogen bonding interactions between the crown ethers and ferrioxamine B. The structural parameters and the conformational features of the ferrioxamine B guests compare very well with each other and with those of the ferrioxamine B structure obtained in the absence of a host. Structural features relevant to siderophore molecular recognition are discussed.     

Carrier-facilitated bulk liquid membrane transport of iron(III)-siderophore complexes utilizing first coordination sphere recognition

Carrier-facilitated bulk liquid membrane (BLM) transport from an aqueous source phase through a chloroform membrane phase to an aqueous receiving phase was studied for various hydrophilic synthetic and naturally occurring Fe(III)-siderophore complexes using first coordination sphere recognition. Iron transport systems were designed such that two cis coordination sites on a hydrophilic Fe(III) complex are occupied by labile aquo ligands, while the other four coordination sites are blocked by strong tetradentate ligands (siderophores). The labile aquo coordination sites can be "recognized" by a liquid membrane-bound hydrophobic bidentate ligand, which carries the hydrophilic Fe(III)-siderophore complex across the hydrophobic membrane to an aqueous receiving phase. The system is further designed for uphill transport of Fe(III) against a concentration gradient, driven by anti-port H(+) transport. Three tetradentate siderophore and siderophore mimic ligands were investigated: rhodotorulic acid (H(2)L(RA)), alcaligin (H(2)L(AG)), and N,N'-dihydroxy-N,N'-dimethyldecanediamide (H(2)L(8)). Flux values for the transport of Fe(L(x))(OH(2))(2)(+) (x = RA, AG, 8) facilitated by the hydrophobic lauroyl hydroxamic acid (HLHA) membrane carrier were the highest when x = 8, which is attributed to substrate lipophilicity. Ferrioxamine B (FeHDFB(+)) was also selectively transported through a BLM by HLHA. The process involves partial dechelation of ferrioxamine B to produce the tetradentate form of the complex (Fe(H(2)DFB)(OH(2))(2)(2+)), followed by ternary complex formation with HLHA (Fe(H(2)DFB)(LHA)(+)) and transport across the membrane into the receiving phase. Uphill transport of ferrioxamine B was confirmed by increased flux as [H(+)](source phase) < [H(+)](receiving phase). The membrane flux of ferrioxamine B occurs near neutral pH, as evidence that ternary complex formation and ligand exchange are viable processes at the membrane/receptor surface of microbial cells.     

Deferoxamine B: A Natural,Excellent and Versatile Metal Chelator

Deferoxamine B is an outstanding molecule which has been widely studied in the past decade for its ability to bind iron and many other metal ions. The versatility of this metal chelator makes it suitable for a number of medicinal and analytical applications, from the well-known iron chelation therapy to the most recent use in sensor devices. The three bidentate hydroxamic functional groups of deferoxamine B are the centerpiece of its metal binding ability, which allows the formation of stable complexes with many transition, lanthanoid and actinoid metal ions. In addition to the ferric ion, in fact, more than 20 different metal complexes of deferoxamine b have been characterized in terms of their chemical speciation in solution. In addition, the availability of a terminal amino group, most often not involved in complexation, opens the way to deferoxamine B modification and functionalization. This review aims to collect and summarize the available data concerning the complex-formation equilibria in solutions of deferoxamine B with different metal ions. A general overview of the progress of its applications over the past decade is also discussed, including the treatment of iron overload-associated diseases, its clinical use against cancer and neurodegenerative disorders and its role as a diagnostic tool.     

Determination of ferrous and ferric iron in aqueous biological solutions

A solvent extraction method was employed to determine ferrous and ferric iron in aqueous samples. Fe³⁺ is selectively extracted into the organic phase (n-heptane) using HDEHP (bis(2-ethylhexyl) hydrogen phosphate) and is then stripped using a strong acid. After separation, both oxidation states and the total iron content were determined directly by ICP-MS analysis. This extraction method was refined to allow determination of both iron oxidation states in the presence of strong complexing ligands, such as citrate, NTA and EDTA. The accuracy of the method was verified by crosschecking using a refinement of the ferrozine assay. Presented results demonstrate the ability of the extraction method to work in a microbiological system in the presence of strong chelating agents following the bioreduction of Fe³⁺ by the Shewanella alga BrY. Based on the results we report, a robust approach was defined to separately analyze Fe³⁺ and Fe²⁺ under a wide range of potential scenarios in subsurface environments where radionuclide/metal contamination may coexist with strongly complexing organic contaminants.     

An expedient reverse‐phase high‐performance chromatography (RP‐HPLC) based method for high‐throughput analysis of deferoxamine and ferrioxamine in urine

The present study was planned to optimize and validate an expedient reverse‐phase high chromatography (RP‐HPLC) based protocol for the analysis of deferoxamine (DFO) and ferrioxamine (FO) in urinary execration of patients suffering β ‐thalassemia major. The optimized RP‐HPLC method was found to be linear over the wide range of DFO and FO concentration (1–90 μg/mL) with appreciable recovery rates (79.64–97.30%) of quality controls at improved detection and quantitation limits and acceptable inter and intraday variability. Real‐time analysis of DFO and FO in the urine of thalassemic patients (male and female) at different intervals of Desferal®(Novartis Pharmaceuticals Corporation) injection revealed DFO and FO excretion at significantly (p < 0) different rates. The maximum concentrations of DFO (76.7 ± 3.06 μg/mL) and FO (74.2 ± 3.25 μg/mL) were found in urine samples, collected after 6 h of drug infusion while the minimum levels of DFO (1.10 ± 0.12 μg/mL) and FO (2.97 ± 0.13 μg/mL) were excreted by patients after 24 h. The present paper offers balanced conditions for an expedient, reliable and quick determination of DFO and FO in urine samples.     

Assessment of semi-automated catecholamine assay by HPLC: Choice of reverse phase C18 or cation-exchange columns

Summary HPLC with electrochemical detection is useful in the assay of catecholamines in biological samples. Two types of chromatographic column are currently employed by most investigators: reverse phase C-18 (RPC-18) or strong cation-exchange (SCX) columns. Our aim was to evaluate the specificity, sensitivity and reproducibility of plasma and urinary catecholamine assay by these two columns. Our study indicates that both columns give very good performance for clinical purposes but sensitivity, precision at low concentration and specificity seem to be better with ion-exchange columns which are therefore preferred at the present time.     

Microdetermination of hyaluronic acid in human urine by high performance liquid chromatography.

A high performance liquid chromatographic (HPLC) system is described for determination of the unsaturated disaccharide (delta Di-HA) derived from hyaluronic acid (HA) in human urine by digestion with hyaluronidase SD. The effects of eluents on the separation of delta Di-HA and delta Di-0S, which is derived from the reaction of chondroitin with the enzyme, have been studied. The established chromatographic conditions were as follows--column: a stainless steel tube (4 mm i.d. x 250 mm) packed with TSKgel NH2-60; eluent: a mixture of acetonitrile and 0.1 M Tris-HCl buffer containing 0.1 M boric acid and 10 mM sodium sulphate, pH 7.0 (64:36, v/v). The strong fluorescence of unsaturated disaccharide after the reaction with 2-cyanoacetamide in alkaline medium was used for post-column detection. The calibration curve for delta Di-HA was linear in the range 5 pmol-5nmol with a practical detection limit of 2 pmol. The assay coefficients of variation (n = 5) at 200 pmol for delta Di-HA and delta Di-0S were 1.7 and 1.5%, respectively. This HPLC system has been applied to the determination of HA in human urine.     

Rapid identification of siderophores by combined thin-layer chromatography/matrix-assisted laser desorption/ionization mass spectrometry

The investigation of a combined thin-layer chromatography/matrix-assisted laser desorption/ionization mass spectrometry (TLC/MALDI-MS) method for the analysis of siderophores from microbial samples is described. The investigated siderophores were enterobactin, ferrioxamine B, ferrichrome, ferrirhodin, rhodotorulic acid and coprogen. Solid-phase extraction was employed to recover the siderophores from the microbial samples. After visualization of the spots via spraying with ferric chloride or chrome azurol sulfonate assay solution, the MALDI matrix was applied to the gel surface. Several TLC/MALDI experimental parameters were optimized, such as type and concentration of MALDI matrix, as well as the type and composition of solvent to facilitate analyte transport from the inside of the TLC gel to the surface. The impact of these parameters on sensitivity, precision and ion formation of the various siderophores was studied. The detection limits for the investigated siderophores were in the range 1-4 pmol. These values were about 4-24 times higher than the detection limits obtained directly from stainless steel MALDI targets. The differences were most likely due to incomplete transport of the 'trapped' analyte molecules from the deeper layers of the TLC gel to the surface and into the matrix layer. In addition, chromatographic band broadening spread the analyte further in TLC as compared with the steel plates, resulting in less analyte per surface area. The identification of the siderophores was aided by concurrently applying a Ga(III) nitrate solution to the TLC plate during the visualization step. The resulting formation of Ga(III) complexes lead to distinctive (69)Ga/(71)Ga isotope patterns in the mass spectra. The versatility of the TLC/MALDI-MS assay was demonstrated by using it to analyze siderophores in a Pseudomonas aeruginosa sample. An iron-binding compound was identified in the sample, namely pyochelin (2-(2-o-hydroxyphenyl-2-thiazolin-4-yl)-3-methylthiazolidine-4-carboxylic acid).     

Simple solid-phase spectrophotometric method for free iron(III) determination

A simple and rapid solid-phase spectrophotometric procedure to determine free Fe(III) in environmental and biological samples is proposed. In particular, a deferoxamine (DFO) self assembled monolayer on mesoporous silica (DFO SAMMS) is developed and here applied as a sensor for iron(III). The solid product became brownish when put in contact with iron(III) solutions; so an immediate application as colorimetric sensor is considered. In order to optimize the DFO SAMMS synthesis and to obtain the best product for iron(III) sensing, a factorial experimental design is performed selecting the maximum absorption at 425 nm as response. The robustness of the spectrophotometric method is also proved.     

Second-Sphere Coordination of Ferrioxamine B and Association of Deferriferrioxamine B, CH(3)(CH(2))(4)NH(3)(+), NH(4)(+), K(+), and Mg(2+) with Synthetic Crown Ethers and the Natural Ionophores Valinomycin and Nonactin in Chloroform

The interaction of ferrioxamine B, FeHDFB(+), through a protonated amine side chain, with various host ionophore structures to form a host-guest complex in the second coordination shell has been investigated. Host-guest association constants (K(a)) in water saturated chloroform are reported for synthetic crown ethers with different cavity size and substituents (18-crown-6 and its dicyclohexano, benzo, and dibenzo derivatives; dibenzo and dicyclohexano derivatives of 24-crown-8; and dibenzo-30-crown-10). The natural ionophores valinomycin and nonactin were also found to form stable second-sphere complexes with ferrioxamine B in wet chloroform. Results are reported for both picrate and perchlorate salts of FeHDFB(+). Since the protonated amine side chain of ferrioxamine B may be viewed as a substituted amine, the host-guest association constants for FeHDFB(+) are compared to the interaction of Mg(2+), K(+), NH(4)(+), CH(3)(CH(2))(4)NH(3)(+), and H(4)DFB(+) with the same ionophores. This is the first report of nonactin complexation of this series of cations in an organic medium of low polarity and one of the few reports of valinomycin complexation. To the best of our knowledge these are the first reported stability constants for the association of (Mg(2+),2pic(-)) with natural and synthetic ionophores in chloroform. K(a) values for ferrioxamine B complexation by the synthetic crown ethers are influenced by ring size and substituent. Despite significant preorganization capabilities, the large cavities of valinomycin, nonactin and benzo-30-crown-10 do not form as stable host-guest assemblies with bulky substituted amine cations such as ferrioxamine B as does cis-dicyclohexano-18-crown-6.     

Comparison of gas chromatographic and high-performance liquid chromatographic assays for the determination of debrisoquine and its 4-hydroxy metabolite in human fluids

A comparison of an established gas chromatographic assay for 4-hydroxydebrisoquine and debrisoquine and a modified high-performance liquid chromatographic assay was made. Both assays used guanoxan as the internal standard and required derivatization of all three compounds with acetylacetone at 96 degrees C for 2.5 h and subsequent ethereal extraction and cleaning steps before chromatographic analysis. For detailed pharmacokinetic studies the gas chromatographic assay was more sensitive in the measurement of low concentrations in plasma, but the liquid chromatographic assay was adequate for phenotyping the 4-hydroxylation of debrisoquine in a population. In the latter assay a mobile phase consisting of 70% methanol in water at pH 3.5 (adjusted with orthophosphoric acid containing 10 mM 1-pentanesulphonic acid was employed (flow-rate 1.5 ml/min) with a pre-column (C8) linked to a reversed-phase muBondapak C18 cartridge in a Z-module. The eluate was detected at 248 nm. With this assay it was observed that the buccal absorption of debrisoquine and 4-hydroxy-debrisoquine was affected by the pH of the buccal medium. This indicates that urinary pH may influence the excretion of both substances at high pH. The debrisoquine-to-4-hydroxydebrisoquine ratio may be dose-dependent.     

Pyrimidine nucleoside phosphorylase assay by automated high-performance liquid chromatography

A new assay for pyrimidine nucleoside phosphorylase is reported. This method utilizes an isocratic reversed-phase high-performance liquid chromatographic system for separation of nucleosides and bases. Product detection is accompanied by ultraviolet monitoring and radioactive flow detection. Use of an automated sample injector allows for the analysis of a series of samples, with data recorded onto a microprocessor-based cassette recorder. Data can then be downloaded into computer memory. The velocity of uridine phosphorylase (E.C. 2.4.2.3) was a linear function of enzyme concentration. The Michaelis constant for uridine at pH 8.0 was found to be in close agreement with the value obtained by a thin-layer chromatographic assay method.     

Determination of N1-methylnicotinamide in urine by high-pressure liquid chromatography.

This paper reports a precise method that is shorter than previously reported methods for the quantitative determination of N1-methylnicotinamide (MNA) in urine. The method employs a single column chromatographic isolation step, followed by high-pressure liquid chromatographic (HPLC) analysis. Potential interfering substances present in urine are removed during the column chromatography step. The combined MNA fractions eluted from this column were collected and concentrated for quantitative assay of MNA by HPLC. HPLC analysis was effected in less than 15 min using a strong cation- exchange column eluted with 0.25 M ammonium dihydrogen phosphate (pH 4.3). Linearity of MNA detection by HPLC at 254 nm extended below 20 ng, with an average recovery of 101% for 150, 250 and 500 microgram MNA added to 5 ml or urine.     

Deferoxamine-paper for iron(III) and vanadium(V) sensing

The development of a sensor based on the functionalization of common filter paper with deferoxamine (DFO) is proposed with the prospect to produce a solid phase for iron(III) and vanadium(V) sensing. The main features of this sensor are the simplicity of operation, good sensitivity and feasible applicability to real samples without the need of pre-treatment procedures. DFO was selected not only for it is easily anchored to the solid support, but also because it forms colored complexes with iron(III) and vanadium(V); hence, the developing of a simple colorimetric sensor can be considered. In particular, an innovative and economic way to perform colorimetric measurements using a desktop scanner is described. A complete characterization of the functionalized material is also reported.     

Thin-layer chromatography of tris(1,10-phenanthroline)iron(II) and tris(2,2′-bipyridine)iron(II) on Sephadex G gels

Summary Gel chromatographic behaviour of tris(1, 10-phenanthroline)iron(II), tris(2,2′-bipyridine)iron(II) and tris(glycinato)cobalt(III) on Sephadex G-10 or G-25 was investigated by TLC with 0.001–1.0M NaCl as the eluent. The zone shapes and R_M values of tris(1,10-phenanthroline)iron(II) and tris(2,2′-bipyridine)iron(II) were appreciably dependent on the sample and eluent concentration, while the neutral complex, tris(glycinato) cobalt(III), exhibited the round zones with constant R_M values. The order of R_M values was found to be tris(glycinato)cobalt(III<tris(2,2∔pyridine)iron(II)<tris-(1,10-phenanthroline)iron(II) in all systems studied, although the reverse trend was expected when assuming the chromatographic behaviour of solute compounds to be controlled by the “sieving effect”. The comparison of the behaviour on Sephadex G gels with that on CM-cellulose revealed that the predominant mechanism involved is not the sieving effect, but ion-exchange and/or hydrophobic interaction.